Carbonyl cationic rhodium(I) and iridium(I) complexes with sulphur donor and triphenylphosphine ligands

Summary The reaction of previously reported Rh^I and Ir^I cationic complexes towards carbon monoxide and triphenylphosphine has been studied. Carbonyl rhodium(I) mixed complexes of the formulae [Rh(CO)L₂(PPh₃)]ClO₄, (L=tetrahydrothiophene(tht), trimethylene sulfide(tms), SMe₂, or SEt₂), [(CO)(PPh₃)Rh{-(L-L)}₂Rh(PPh₃)(CO)](ClO₄)₂ (L-L= 2,2,7,7-tetramethyl-3,6-dithiaoctane (tmdto), (MeS)₂(CH₂)₃ (dth), or 1,4-dithiacyclohexane (dt), [Rh(CO)L(PPh₃)₂]ClO₄ (L= tht, tms, SMe₂, or SEt₂), and carbonyl iridium(I) complexes of the formulae [Ir(CO)₂(COD)(PPh₃)]ClO₄, [Ir(CO)(COD)(PPh₃)₂]ClO₄, [(CO)(COD)(PPh₃) Ir{-(L-L)} Ir(PPh₃)(COD)(CO)](ClO₄)₂ (L-L = tmdto or dt), [(CO)₂ (PPh₃)Ir(-tmdto)Ir(PPh₃)(CO)₂](ClO₄)₂, [(CO)₂(PPh₃) Ir(-dt)₂Ir(PPh₃)(CO)₂](ClO₄)₂, were prepared by different synthetic methods.     

Cationic complexes of rhodium(I) with phenanthroline type ligands

Summary Complexes [Rh(COD)(L-L)]ClO₄ are prepared by reaction of [Rh(COD)₂]ClO₄ with the appropriate ligand L-L (4,7-Ph₂Phen, 2,9-Me₂-4,7-Ph₂Phen, 2,9-Me₂Phen or 5,6-Me₂Phen). Treatment of these complexes with carbon monoxide gives [Rh(CO)₂(L-L)]ClO₄. When the carbonylation reaction is performed in the presence of P(4-RC₆H₄)₃, pentacoordinate complexes [Rh(CO)(L-L){P(4-RC₆-H₄)}_{3 2}]ClO₄ (R=Me, H, F or Cl) are formed. The use of [Rh(COD)(L-L)]ClO₄ as homogeneous hydroformylation catalyst precursors was studied (50 atm, 80°C). Under these conditions no hydrogenation of the olefin or of the aldehydes is observed, but isomerisation reactions are significant.     

Platinum,iridium and rhodium complexes with substituted bis-(diphenylphosphino)methane ligands Ph2PCH(R)PPh2 (R = Me,Ph or SiMe3)

Substituted phosphines of the type Ph₂PCH(R)PPh₂ and their Pt^II complexes [PtX₂{Ph₂PCH(R)PPh₂}] (R = Me, Ph or SiMe₃; X = halide) were prepared. Treatment of [PtCl₂(NCBu^t)₂] with Ph₂PCH(SiMe₃)-PPh₂ gave [PtCl₂(Ph₂PCH₂PPh₂)], while treatment with Ph₂PCH(Ph)PPh₂ gave [Pt{Ph₂PCH(Ph)PPh₂}₂]Cl₂. Reaction of p-MeC₆H₄C≡CLi or PhC≡CLi with [PtX₂{Ph₂PCH(Me)PPh₂}] gave [Pt(C≡CC₆H₄Me-p)₂-{Ph₂PCH(Me)PPh₂}] (X = I) and [Pt{Ph₂PC(Me)PPh₂}₂](X = Cl),while reaction of p-MeC₆H₄C≡CLi with [Pt{Ph₂PCH(Ph)PPh₂}₂]Cl₂ gave [Pt{Ph₂PC(Ph)PPh₂}₂]. The platinum complexes [PtMe₂(dpmMe)] or [Pt(CH₂)₄(dpmMe)] fail to undergo ring-opening on treatment with one equivalent of dpmMe [dpmMe = Ph₂PCH(Me)PPh₂]. Treatment of [Ir(CO)Cl(PPh₃)₂] with two equivalents of dpmMe gave [Ir(CO)(dpmMe)₂]Cl. The PF₆ salt was also prepared. Treatment of [Ir(CO)(dpmMe)₂]Cl with [Cu(C≡CPh)₂], [AgCl(PPh₃)] or [AuCl(PPh₃)] failed to give heterobimetallic complexes. Attempts to prepare the dinuclear rhodium complex [Rh₂(CO)₃(μ-Cl)(dpmMe)₂]BPh₄ using a procedure similar to that employed for an analogous dpm (dpm = Ph₂PCH₂PPh₂) complex were unsuccessful. Instead, the mononuclear complex [Rh(CO)(dpmMe)₂]BPh₄ was obtained. The corresponding chloride and PF₆ salts were also prepared. Attempts to prepare [Rh(CO)(dpmMe)₂]Cl in CHCl₃ gave [RhHCl(dpmMe)₂]Cl. Recrystallization of [Rh(CO)(dpmMe)₂]BPh₄ from CHCl₃/EtOH gave [RhO₂(dpmMe)₂]BPh₄. Treatment of [Rh(CO)₂Cl₂]₂ with one equivalent of dpmMe per Rh atom gave two compounds, [Rh(CO)(dpmMe)₂]Cl and a dinuclear complex that undergoes exchange at room temperature between two formulae: [Rh₂(CO)₂(μ-Cl)(μ-CO)(dpmMe)₂]Cl and [Rh₂(CO)₂-(μ-Cl)(dpmMe)₂]Cl. This revised version was published online in June 2006 with corrections to the Cover Date.     

Monocarbonyl cationic rhodium(I) complexes

Summary The preparations and characterisation of cationic complexes of the type [Rh(CO)(MeCN)(PR₃)₂]ClO₄, [Rh(CO)L(PR₃)₂]ClO₄ (L=py or 2-MeOpy), [Rh(CO)(L-L)(PR₃)₂]ClO₄ (L-L = bipy or phen) and [Rh(CO)(PR₃)₃]ClO₄ with PR₃ = P(p-YC₆H₄)₃ (Y=Cl, F, Me or MeO) are described.     

Synthesis of organometallic hydrotris(pyrazol-1-yl)boratoruthenium(II) complexes

The reactions of K[HB(pz)₃] (pz = pyrazol-1-yl) with the coordinatively unsaturated σ-vinyl complexes [Ru(CRCHR)Cl(CO)(PPh₃)₂] (R = H, Me, C₆H₅) proceed with loss of a chloride and a phosphine ligand to provide the compounds [Ru(CRCHR)(CO)(PPh₃){HB(pz)₃}] in high yield. Similar treatment of the complex [Ru(C₆H₄Me-4)Cl(CO)(PPh₃)₂] leads to the related σ-aryl derivative [Ru(C₆H₄Me-4)(CO)(PPh₃){HB(pz)₃}] whilst the complex [RuClH(CO)(PPh₃)₃] treated successively with diphenylbutadiyne and K[HB(pz)₃] provides the unusual derivative [Ru{C(CCPh)CHPh}(CO)(PPh₃){HB(pz)₃}].     

A novel reaction producing the rhodium(I) complexes with π-coordinated tetraphenylborate anion, (π-PhBPh3). X-ray study of [Rh(PPh3)2(π-PhBPh3)]

Treating the complexes [Rh(TFA)(PPh₃)₂], [Rh(HFA)(PPh₃)₂], and [Rh(TFA)(Cod)] (TFA - trifluoroacetylacetonate, HFA - hexafluoroacetylacetonate, Cod - 1,5 cyclooctadiene) with an excess of NaBPh₄ in acetonitrile yields the rhodium(I) complexes with coordinated [BPh₄]⁻ anion, [Rh(PPh₃)₂(π-PhBPh₃)] · 2MeCN (I) and [Rh(Cod)(π-PhBPh₃)] (II). The reactions present a new example of β-diketonate ligand replacement. The ¹H, ³¹P, and ¹¹B NMR spectra of I and II are discussed. [Rh(PPh₃)₂(π-PhBPh₃)] has been characterized by single crystal X-ray analysis.     

Synthesis and catalytic activity of some cationic rhodium(I) complexes with substituted quinolines

Summary The synthesis and properties of cationic complexes of the type [Rh(NBD)L₂]ClO₄, [Rh(NBD)L(PPh₃)]ClO₄ and [Rh(CO)L(PPh₃)₂]ClO₄ (L = substituted quinolines) are described. The diolefin complexes catalyse hydrogen transfer from isopropanol to some unsaturated substrates.     

Synthesis of [TpRu(CO)(PPh3)]2(μ-CHCHCHCHC6H4CHCHCHCH) from Wittig reactions

Treatment of [Ru(CHCHCH₂PPh₃)X(CO)(PPh₃)₂]⁺ (X=Cl, Br) with KTp (Tp=hydridotris(pyrazolyl)borate) and NaBPh₄ produced [TpRu(CHCHCH₂PPh₃)(CO)(PPh₃)]BPh₄. Reaction of RuHCl(CO)(PPh₃)₃ with HCCCH(OEt)₂ produced Ru(CHCHCH(OEt)₂)Cl(CO)(PPh₃)₂, which reacted with KTp to give TpRu(CHCHCHO)(CO)(PPh₃). Treatment of [TpRu(CHCHCH₂PPh₃)(CO)(PPh₃)]BPh₄ with NaN(SiMe₃)₂ and benzaldehyde produced TpRu(CHCHCHCHPh)(CO)(PPh₃). The later complex was also produced when TpRu(CHCHCHO)(CO)(PPh₃) was treated with PhCH₂PPh₃Cl/NaN(SiMe₃)₂. The bimetallic complex [TpRu(CO)(PPh₃)]₂(μ-CHCHCHCHC₆H₄CHCHCHCH) was obtained from the reaction of [TpRu(CHCHCH₂PPh₃)(CO)(PPh₃)]BPh₄ with NaN(SiMe₃)₂ and terephthaldicarboxaldehyde.     

Preparation and properties of some cationic norbornadiene rhodium(I) complexes with triarylphosphines

Summary The synthesis of [Rh(NBD){P(p-RC₆H₄)₃}₂]A complexes (A=ClO ₄ ^– or BPh ₄ ^– ; R=Cl, F, Me or MeO) is described. Treatment of these complexes with molecular hydrogen leads to the isolation of [RhH₂{P(p-RC₆H₄)₃}₂(OCMe₂)₂]ClO₄ or Rh{P(p-RC₆H₄)₃}₂PhBPh₃. These latter complexes contain tetraphenylborate coordinated to the metalvia arene interaction. [Rh(CO)₃{P(p-RC₆H₄)₃}₂]ClO₄ complexes have been isolated by carbonylations. The use of these complexes as homogeneous hydroformylation catalysts is also briefly investigated.     

Preparation and Reactivity of Mixed‐Ligands Hydride Complexes [RuHCl(CO)(PPh3)2{P(OR)3}]

Mixed‐ligands hydride complexes [RuHCl(CO)(PPh₃)₂{P(OR)₃}] ( 2 ) (R = Me, Et) were prepared by allowing [RuHCl(CO)(PPh₃)₃] ( 1 ) to react with an excess of phosphites P(OR)₃ in refluxing benzene. Treatment of hydrides 2 first with triflic acid and next with an excess of hydrazine afforded hydrazine complexes [RuCl(CO)(κ¹‐NH₂NHR1)(PPh₃)₂{P(OR)₃}]BPh₄ ( 3 , 4 ) (R1 = H, CH₃). Diethylcyanamide derivatives [RuCl(CO)(N≡CNEt₂)(PPh₃)₂{P(OR)₃}]BPh₄ ( 5 ) were also prepared by reacting 2 first with HOTf and then with N≡CNEt₂. The complexes were characterized spectroscopically and by X‐ray crystal structure determination of [RuHCl(CO)(PPh₃)₂{P(OEt)₃}] ( 2b ).     

2,2′-biimidazole, 2,2′-bibenzimidazole and imidazoles as ligands in cationic rhodium(I) complexes

Summary Cationic rhodium(I) complexes of the type [Rh(diolefin)(L-L)]ClO₄ and [Rh(diolefin)L₂]ClO₄, (diolefin = 1,5-cyclooctadiene, 2,5-norbornadiene and tetrafluorobenzobarrelene; L-L = 2,2-biimidazole, 2,2-bibenzimidazole; L = pyrazole or imidazoles) are described. [Rh(CO)₂(L-L)]-C1O₄ complexes, which can be obtained by reaction of cyclooctadiene derivatives with CO, react with P-donor ligands in equimolar ratios to yield [Rh(CO)(P-donor)(L-L)]ClO₄ monocarbonyl derivatives. The catalytic activity of some of these complexes is considered.     

Reactivity of cationic methyl rhodium(III) complexes cis-[Rh(β-diket)(PPh3)2(CH3)(CH3CN)][BPh4] toward ligands of different character: pyridine, carbon monoxide, and triphenylphosphine

Cationic methyl complex of rhodium(III), cis-[Rh(Acac)(PPh₃)₂(CH₃)(Py)][BPh₄] (1) as a single isomer with Py in the trans to PPh₃ position, is formed upon the reaction of cis-[Rh(Acac)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] with pyridine in methylene chloride solution.Complex 1 was characterized by elemental analysis and by ³¹P{¹H} and ¹H NMR spectra.Cationic pentacoordinate acetyl complexes, trans-[Rh(Acac)(PPh₃)₂(COCH₃)][BPh₄] (2) and trans-[Rh(BA)(PPh₃)₂(COCH₃)][BPh₄] (3), are prepared by action of carbon monoxide on cis-[Rh(Acac)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] and cis-[Rh(BA)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄], respectively, in methylene chloride solutions.Complexes 2 and 3 were characterized by elemental analysis and by IR, ³¹P{¹H}, ¹³C{¹H} and ¹H NMR. According to NMR data, 2 and 3 in solution are non-fluxional trigonal bipyramids with β-diketonate and acetyl ligands in the equatorial plane and axial phosphines.In solutions, 2 and 3 gradually isomerize into octahedral methyl carbonyl complexes trans-[Rh(Acac)(PPh₃)₂(CO)(CH₃)][BPh₄] (4) and trans-[Rh(BA)(PPh₃)₂(CO)(CH₃)][BPh₄] (5), respectively.Complexes 4 and 5 were characterized by IR, ³¹P{¹H}, ¹³C{¹H} and ¹H NMR, without isolation.Upon the action of PPh₃ on cis-[Rh(Acac)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] and cis-[Rh(BA)(PPh₃)₂(CH₃)(CH₃CN)] [BPh₄], reductive elimination of the methyl ligand as a phosphonium salt, [CH₃PPh₃][BPh₄], occurs to give square planar rhodium(I) complexes [Rh(Acac)(PPh₃)₂] and[Rh(BA)(PPh₃)₂], respectively. The reaction products were identified in the reaction mixtures by ³¹P{¹H} and ¹H NMR.     

Synthesis,stability and reactivity of cationic carbonyl complexes of rhodium(I)

Summary Trans-[RhCl(CO)L₂] (L = PPh₃, AsPh₃ or PCy₃) react with AgBF₄ in CH₂Cl₂ to give the novel species [Rh-(CO)L₂]⁺ [BF₄]^–.nCH₂Cl₂ (n = 1/2 or 1 1/2) (1–3), which we believe to be stabilised by weak solvent interaction. The corresponding stibine compound cannot be isolated by the same process, instead [Rh(CO)₂(SbPh₃)₃]⁺ [BF₄]^– (7) is formed when the reaction is carried out in the presence of CO. When reactions designed to prepare [Rh(CO)L₂]⁺ [BF₄]^– are performed in the presence of CO, or [Rh(CO)L₂]⁺ [BF₄]^– complexes are reacted with CO, [Rh(CO)₂L₂]⁺ [BF₄]^– (L = PPh₃, AsPh₃ or PCy₃) (4–6) are formed. If Me₂CO is used as solvent in the preparation of [Rh(CO)L₂]⁺ [BF₄]^– (L = PPh₃ or AsPh₃), then the products are the four-coordinate [Rh(CO)L₂-(Me₂CO)]⁺ [BF₄]^– (8,9) species. The complexes have been characterised by i.r., ³¹P and ¹H n.m.r. spectroscopy and elemental analyses.     

Carbonylrhodium complexes with pyridylphosphines: [Rh(chel)(CO)(PPhxpyl3−x)]

Summary Diphenyl(2-pyridyl)phosphine (PPh₂pyl), phenylbis(2-pyridyl)-phosphine (PPhpyl₂) and tris(2-pyridyl)-phosphine (Ppyl₃) react with [Rh(acac)(CO)₂] (acac=acetylacetonate) and Rh(8-oxy)(CO)₂(8-oxy=8-hydroxyquinolinate) yielding [Rh(chel)(CO)(PPh_xpyl_3–x)]. The properties of these complexes were examined by spectral (i.r.,u.v.-vis,³¹P n.m.r.) and chemical methods.     

Reactions of cationic rhodium(I) carbonyl compounds with nucleophiles to form alkoxo,carboalkoxy and carboxylato complexes. Part II

Summary The rhodium(I) carbonyl compounds [Rh(CO)L₂2] [BF₄]. 1/2CH₂Cl_nn2 (L = PPh₂ or AsPh₃) react with the nucleophiles OMe⁻, RCOO⁻ (R = Me, Et) under nitrogen to form [Rh(OR)(CO)L₂] (1)–(2) and [Rh(OOCR)(CO)L₂] (7)–(₁₀), respectively. Addition of [Rh(CO)₂(PPh₃)₂]-[BF ₄] to OMe⁻ under nitrogen produces [Rh(COOMe)-(CO) (PPh₃)₂]-MeOH (3), whilst reactions of [Rh(CO)-(PPh₃)₂] [BF₄]·1/2CH₂Cl₂ and [Rh(CO)₂(PPh₃)₂] [BF₄] with OR_- (R = Me, Et or n-Pr) in the presence of CO produce [Rh(COOR)(CO)₂(PPh₃)₂] (4)–(6). The products have been characterised by i.r., ¹H, ³¹P, ¹³Cn.m.r. spectroscopy and elemental analysis.     

Reactions involving transition metals : XIX. Some reactions of perfluoronorbornadiene with low valent transition metal complexes

Perfluoronorbornadiene reacts with the compounds [M(PPh₃)₄] (M = Pt, Pd) and [IrCl(CO)(PMePh₂)₂] to give the adducts [(C₇F₈)M(PPh₃)₂] and [(C₇F₈)IrCl(CO)(PMePh₂)₂] in which one of the double bonds is coordinated to the metal atom. The platinum complex reacts further with [Pt(PPh₃)₄] to give [(C₇F₈){Pt(PPh₃)₂}₂] having both double bonds coordinated to a Pt atom. The carbonylmetal anions [M^?] react to form the mono-substitution products [(C₇F₇)M] (M = Mn(CO)₅, Re(CO)₅, Ir(CO)₂(PPh₃)₂, Rh(CO)₂(PPh₃)₂), but the use of an excess of [Fe(CO)₂(η-C₅H₆)]^? leads to substitution of one fluorine atom on each of the double bonds. The complex having M = Mn(CO)₅ reacts with [Pt(PPh₃)₄] to afford the derivative [(C₇F₇){Mn(CO)₄(PPh₃)}{Pt(PPh₃)₂}], and the compound where M = Ir(CO)₂(PPh₃)₂ undergoes an oxidative addition reaction with acetyl chloride. Oxidative coupling products have been isolated on UV irradiation of a mixture of perfluoronorbornadiene and [Fe(η⁴-CH₂CRCHCH₂)(CO)₃] (R = H, Me), and under similar conditions the reaction with Fe(CO)₅ affords [(C₇F₈)Fe(CO)₄] in very low yield.     

Study of hydroformylation of formaldehyde in the presence of rhodium catalysts byin situ IR spectroscopy and the kinetic technique

Carbonylrhodium complexes formed during hydroformylation of CH₂O from various rhodium precursors were investigated byin situ IR spectroscopy. It was found that under the conditions of the hydroformylation of CH₂O inN,N-dimethylacetamide (DMAA), RhH(CO)(PPh₃)₃, RhCl(CO)(PPh₃)₂, RhCl(PPh₃)₃, RhCl(CO)(PBu₃)₂, and [RhCl(CO)₂]₂ form complex systems that necessarily contain anionic complexes, [Rh(CO)₂L_x(DMAA)_y]^– (L = PPh₃, PBu₃,x = 1 to 2,y = 1 to 0; [Rh(CO)₄]^–). The participation of ionic structures in the hydroformylation of CH₂O, most likely, in the step of the activation of CH₂O, was proven by kinetic techniques.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1066–1069, June, 1995.     

Synthesis and reactivity of rhodium(I) complexes of the type Rh(L-L)(CO)[P(OPh)3] and Rh(L-L)[P(OPh)3]2

Summary The carbonyl ligands in the Rh¹ complexes Rh(L-L)(CO)₂ [L-L=anthranilate (AA) orN-phenylanthranilate(FA) ions] are replaced by P(OPh)₃ to form the mono-or disubstituted products, Rh(L-L)(CO)[P(OPh)₃] and Rh(L-L)[P(OPh)₃]₂ respectively depending on the [P(OPh)₃]/[Rh] molar ratio, at room temperature and in air. Under argon at [P(OPh)₃]/[Rh]4 theortho-metallated Rh¹ complex Rh[P(OPh)₃]₃[P(OC₆H₄)-OPh)₂] is formed. The new route forortho-metallated Rh¹ complex synthesis is described.The Rh(AA)(CO)₂ complex was used as a catalyst precursor in hydroformylation of olefins.     

Rhodium(I) complexes with bis(pyrazolyl)methane ligands. Crystal structure of [Rh(COD)(CH2(Pz)2)]ClO4·12 C2H4Cl2

The synthesis and properties of neutral and cationic complexes of general formulae [{RhCl(diolefin)}₂(CH₂(pz)₂)], [Rh(CO)₂ (CH₂(pz)₂)][RhCl₂(CO)₂], (Rh(diolefin)(CH₂(pz)₂)]ClO₂, [{Rh(diolefin)(PPh₃)}₂(CH₂(pz)₂)](ClO₄)₂, [Rh(CO)₂(CH₂(pz)₂)]ClO₄ and [Rh(CO)(CH₂(pz)₂)(PPh₃)]ClO₄ are described. The NMR spectra of [Rh(COD)(CH₂(pz)₂)]ClO₄ complexes are discussed. X-ray structural analysis of [Rh(COD)(CH₂(Pz)₂)]ClO₄ · $\text{1}\text{2}$C₂H₄Cl₂ is presented; the final R factor is 0.061 for 2436 observed data, recorded with Cu-K_α, not corrected for absorption and with the sample inside a capillary. The Rh atom presents a distorted square planar coordination in a mononuclear arrangement. The COD ring has a twisted boat conformation, and the two halves of the CH₂(Pz)₂ moiety, which are quite similar to one another, form an angle of 47.2(4)°.     

Reactions of [ReOX3(PPh3)2] Complexes (X = Cl,Br) with Phenylacetylene and the Structures of the Products

Oxorhenium(V) complexes [ReOX₃(PPh₃)₂] (X = Cl, Br) react with phenylacetylene under formation of complexes with ylide‐type ligands. Compounds of the compositions [ReOCl₃(PPh₃){C(Ph)C(H)(PPh₃)}] ( 1 ), [ReOBr₃(OPPh₃){C(Ph)C(H)(PPh₃)}] ( 2 ), and [ReOBr₃(OPPh₃){C(H)C(Ph)(PPh₃)}] ( 3 ) were isolated and characterized by X‐ray diffraction. They contain a ligand, which was formed by a nucleophilic attack of released PPh₃ at coordinated phenylacetylene. The structures of the products show that there is no preferable position for this attack. Cleavage of the Re–C bond in 3 and dimerization of the organic ligand resulted in the formation of the [{(PPh₃)(H)CC(Ph)}₂]²⁺ cation, which crystallized as its [(ReOBr₄)(OReO₃)]^2– salt.