Glass formation in the CaO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> and SrO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> systems

A physicochemical study of glasses based on the MO-Bi₂O₃-B₂O₃ and SrO-Bi₂O₃-B₂O₃ systems was performed. Glass formation regions were found. The structural and optical properties, as well as the thermal behavior of the glasses, were studied.     

Specific heat on Sr<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>7</Subscript> and Sr<Subscript>2</Subscript>Ta<Subscript>2</Subscript>O<Subscript>7</Subscript>

Summary Specific heats on the single crystals of Sr₂Nb₂O₇, Sr₂Ta₂O₇ and (Sr_1-xBa_x)₂Nb₂O₇ were measured in a wide temperature range of 2-600 K. Heat anomalies of a λ-type were observed at the incommensurate phase transition of T_INC (=495 K) on Sr₂Nb₂O₇ and at the super-lattice phase transition of T_SL (=443 K) on Sr₂Ta₂O₇; the transition enthalpies and the transition entropies were estimated. Furthermore, a small heat anomaly was observed at the low temperature ferroelectric phase transition of T_LOW (=95 K) on Sr₂Nb₂O₇. The transition temperature T_LOW decreases with increasing Ba content x and it vanishes for samples of x>2%.     

The 3Ga<Subscript>2</Subscript>S<Subscript>3</Subscript>-EuLaGa<Subscript>3</Subscript>S<Subscript>7</Subscript> system

The La₂S₃-Ga₂S₃-EuS system has been investigated along the 3Ga₂S₃-EuLaGa₃S₇ join by physicochemical methods (DTA, X-ray powder diffraction, microstructural analysis). is a quasi-binary eutectic-type section of the ternary system. Solubility on the base of both components has been revealed in the system. Solubility at room temperature is 3 mol % EuLaGa₃S₇ on the Ga₂S₃ side 1.5 mol % Ga₂S₃ and on the base of the EuLaGa₃S₇ compound. The coordinates of the eutectic point are 80 mol% EuLaGa₃S₇ and 1020 K.     

Synthesis and structure of [UO<Subscript>2</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>){CONH<Subscript>2</Subscript>N(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>}<Subscript>2</Subscript>]

The single crystals of [UO₂(C₂O₄){CONH₂N(CH₃)₂}₂] were synthesized and studied by X-ray diffraction. The crystals are monoclinic, a = 7.461(2) Å, b = 8.828(2) Å, c = 11.756(2) Å, β = 107.21(3)°, space group Pc, Z = 2, R = 2.94%. The structure comprises infinite chains [UO₂(C₂O₄){CONH₂N(CH₃)₂}₂] extended along [001] and corresponding to the AT¹¹M ₂ ¹ crystallochemical group (A = UO ₂ ²⁺ , T¹¹ = C₂O ₄ ^2? , M¹ = N,N-CONH₂N(CH₃)₂) of uranyl complexes. The chains are connected into a three-dimensional framework by hydrogen bonds involving the oxygen atoms of oxalate and uranyl ions and the N,N-dimethylcarbamide methyl groups.     

Phase formation in the Ag<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-MgMoO<Subscript>4</Subscript>-Al<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> system

The subsolidus region of the Ag₂MoO₄-MgMoO₄-Al₂(MoO₄)₃ ternary salt system has been studied by X-ray phase analysis. The formation of new compounds Ag_{1 ? x} Mg_{1 ? x} Al_{1 + x} (MoO₄)₃ (0 ≤ x ≤ 0.4) and AgMg₃Al(MoO₄)₅ has been determined. The Ag_{1 ? x} Mg_{1 ? x} Al_{1 + x} (MoO₄)₃ variable-composition phase is related to the NASICON type structure (space group R \(\bar 3\) c). AgMg₃Al(MoO₄)₅ is isostructural to sodium magnesium indium molybdate of the same formula unit and crystallizes in triclinic system (space group P \(\bar 1\), Z = 2) with the following unit cell parameters: a = 9.295(7) Å, b = 17.619(2) Å, c = 6.8570(7) Å, α = 87.420(9)°, β = 101.109(9)°, γ = 91.847(9)°. The compounds Ag_{1 ? x} Mg_{1 ? x} Al_{1 + x} (MoO₄)₃ and AgMg₃Al(MoO₄)₅ are thermally stable up to 790 and 820°C, respectively.     

Chemical durability of MoO<Subscript>3</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> and K<Subscript>2</Subscript>O-MoO<Subscript>3</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

Thermal and chemical durability studies of the phosphate glasses belonging to the binary MoO₃-P₂O₅ and the ternary K₂O-MoO₃-P₂O₅ systems are reported. The chemical resistant attack tests carried out on the free alkaline MoO₃-P₂O₅ glasses show that the glass associated with the P/Mo ratio 2 has the high chemical durability. It shows also a high glass transition temperature value. The above findings are interpreted in terms of the cross-link density of the glasses and the strength of the M-O bonds (M=P, Mo). The influence of K₂O addition on the properties (density, T _g, durability) of this binary high water resistant glass is studied. It is found that the chemical durability along with the other physical properties are reduced by the incroporation of K₂O in the glass matrix. The results were explained by assuming the formation of non-bridging oxygens and weak bonds. The mechanism of the dissolution of these glasses is proposed.     

Structure and some properties of [UO<Subscript>2</Subscript>CrO<Subscript>4</Subscript>{CH<Subscript>3</Subscript>CON(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>}<Subscript>2</Subscript>]

A new complex [UO₂CrO₄{CH₃CON(CH₃)₂}₂] (I) was studied by thermal analysis, IR spectroscopy, and X-ray crystallography. The crystals are monoclinic: a = 13.8108(11) Å, b = 8.6804(7) Å, c = 13.0989(10) Å, β = 104.777(1)°, V = 1518.4(2) ų, space group P2₁/c, Z = 4, R = 2.39%. The structure of I contains infinite chains of the [UO₂CrO₄{CH₃CON(CH₃)₂}₂] composition running along [001]; the complex belongs to the AT¹¹M¹ ₂ crystal-chemical group (A = UO ₂ ²⁺ , T¹¹ = CrO ₄ ^2? , M¹ = CH₃CON(CH₃)₂) of uranyl complexes. The chains are linked into a three-dimensional framework due to hydrogen bonds between oxygen atoms of chromate ions and hydrogen atoms of methyl groups of the dimethylacetamide.     

Three-component systems LiBr-LiVO<Subscript>3</Subscript>-Li<Subscript>2</Subscript>MoO<Subscript>4</Subscript> and LiBr-Li<Subscript>2</Subscript>SO<Subscript>4</Subscript>-Li<Subscript>2</Subscript>MoO<Subscript>4</Subscript>

Phase equilibria in the three-component systems LiBr-LiVO₃-Li₂MoO₄ and LiBr-Li₂SO₄-Li₂MoO₄ have been studied using differential thermal analysis (DTA). Eutectic compositions have been determined (mol %): in the system LiBr-LiVO₃-Li₂MoO₄, 56.0 LiBr, 22.0 LiVO₃, and 22.0 Li₂MoO₄ with a melting temperature of 413°C; and in the system LiBr-Li₂SO₄-Li₂MoO₄, 65.0 LiBr, 14.0 Li₂SO₄, and 21.0 Li₂MoO₄ with a melting temperature of 421°C. Phase fields have been demarcated.     

Glass formation in the Al(IO<Subscript>3</Subscript>)<Subscript>3</Subscript>-Al<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>3</Subscript>-HIO<Subscript>3</Subscript>-H<Subscript>2</Subscript>O system

On the basis of experimental data obtained in the study of glass-formation boundaries in the Al₂(SO₄)₃-HIO₃-H₂O, Al(IO₃)₃-Al₂(SO₄)₃-H₂O, and Al(IO₃)₃-HIO₃-H₂O systems and using geometrical analysis, we predict the positions of glass-formation boundaries in the Al(IO₃)₃-Al₂(SO₄)₃-HIO₃-H₂O four-component system along 60, 40, and 25 wt % H₂O sections.     

Crystal structures of Ti(NH<Subscript>4</Subscript>)<Subscript>2</Subscript>P<Subscript>4</Subscript>O<Subscript>13</Subscript> and Sn(NH<Subscript>4</Subscript>)<Subscript>2</Subscript>P<Subscript>4</Subscript>O<Subscript>13</Subscript>

The characteristics of crystal structures of the titanium(IV) diammonium (Ti(NH₄)₂P₄O₁₃) and tin(IV) diammonium (Sn(NH₄)₂P₄O₁₃) tetraphosphates, which are isostructural with similar silicon(IV) and germanium(IV) salts, have been obtained by the Rietveld method using X-ray powder diffraction data. The compounds crystallize in the triclinic system, space group P \(\overline 1 \), Z = 2, a = 15.0291(7) Å, b = 7.9236(4) Å, c = 5.0754(3) Å, α = 99.168(3)°, β = 97.059(3)°, γ = 83.459(3)° for Ti(NH₄)₂P₄O₁₃ and a = 15.1454(7) Å, b = 8.0103(5) Å, c = 5.1053(3) Å, α = 99.898(6)°, β = 96.806(3)°, γ = 83.881(4)° for Sn(NH₄)₂P₄O₁₃. The structure is refined in the isotropic approximation using the pseudo-Voigt function: R _p = 0.077, R _Bragg = 0.045, R _F = 0.057 for Ti(NH₄)₂P₄O₁₃; R _p = 0.082, R _Bragg = 0.044, R _F = 0.046 for Sn(NH₄)₂P₄O₁₃. The hydrogen atoms of the ammonium cations are placed in the calculated positions. A comparative analysis of the structures of the compounds of the M^IV(NH₄)₂P₄O₁₃ (M^IV = Si, Ge, Ti, Sn) series has been carried out.     

Modeling the active centers of V<Subscript>2</Subscript>O<Subscript>5</Subscript>/SiO<Subscript>2</Subscript> and V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> supported catalysts. DFT theoretical analysis of optical properties

Within the framework of the density functional theory (DFT), the electronic structure of monooxodioxovanadium functional groups in tetrahedral coordination, which model the active centers (ACs) of fine supported catalysts V₂O₅/SiO₂ and V₂O₅/TiO₂, has been analyzed. The optimal structures of three ACs as possible models of monomeric and polymeric oxovanadium forms on the carriers with low vanadium content were determined. The modified DFT method involving the time dependence of Kohn-Sham equation (TDDFT) was used for the adopted AC models to calculate the energies of the excited states, and optical spectra of the absorption in 25000–60000 cm^?1 region were reconstructed on their base. The spectrum in this region is due to O → V charge transfer. The features of electronic spectra with the charge transfer for V₂O₅/SiO₂ and V₂O₅/TiO₂ catalysts and the vibrational spectra of three AC models corresponding to the monomeric and dimeric oxovanadium forms of the supported catalysts V₂O₅/SiO₂ and V₂O₅/TiO₂ were defined. The detailed interpretation of normal vibration frequencies is given. The frequencies typical of the monomeric and dimeric oxovanadium forms on the carrier surface were identified.     

NaBO<Subscript>2</Subscript>-Na<Subscript>2</Subscript>CO<Subscript>3</Subscript>-Na<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-Na<Subscript>2</Subscript>WO<Subscript>4</Subscript> quaternary system

This is the first study of the NaBO₂-Na₂CO₃-Na₂MoO₄-Na₂WO₄ quaternary system by differential thermal analysis. Na₂[MoO_4(x)WO_{4(1 − x)}] solid solutions in the quaternary system are found to not decompose.     

Sm<Subscript>2</Subscript>S<Subscript>3</Subscript>-Sm<Subscript>2</Subscript>O<Subscript>3</Subscript> phase diagram

The Sm₂S₃-Sm₂O₃ phase diagram was studied by physicochemical methods of analysis from 800 K up to melting. Two oxysulfides are formed in the system: Sm₁₀S₁₄O with tetragonal crystal structure (space group I41/acd; unit cell parameters: a = 1.4860 nm, c = 1.9740 nm; microhardness: H = 4700 MPa; solid decomposition temperature: 1500 K) and Sm₂O₂S with hexagonal structure (space group P-3m1; a = 0.3893 nm, c = 0.6717 nm; H = 4500 MPa; congruent melting temperature: 2370 K). Within the extent of the Sm₂O₂S-based solid solution (61–70 mol % Sm₂O₃) at 1070 K, a singular point appears at the compound composition on property-composition curves. The eutectic coordinates: 23 mol % Sm₂O₃ and 1850 K; 80 mol % Sm₂O₃ and 2290 K.     

Crystal structure of a new ternary molybdate in the Rb<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-Eu<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript>-Hf(MoO<Subscript>4</Subscript>)<Subscript>2</Subscript> system

A ternary salt system Rb₂MoO₄-Eu₂(MoO₄)₃-Hf(MoO₄)₂ was studied in the subsolidus area by X-ray phase analysis. A novel ternary molybdate, Rb_4.98Eu_0.86Hf_1.11(MoO₄)₆, formed in the system. The Rb_4.98Eu_0.86Hf_1.11(MoO₄)₆ rubidium-europium-hafnium molybdate crystals were grown by solution-melt crystallization under the spontaneous nucleation conditions. The structure and composition of this compound were refined by single crystal X-ray diffraction (X8 APEX automated diffractometer, MoK _α radiation, 1753 F(hkl), R = 0.0183). The crystals are trigonal, a = b = 10.7264(1) Å, c = 38.6130(8) Å, V = 3847.44(9) ų, Z = 6, space group R \(\bar 3\) c. The three-dimensional mixed framework of the structure comprises Mo tetrahedra and two types of octahedra, (Eu,Hf)O₆ and HfO₆. The large cavities of the framework include two types of the rubidium atom. The distribution of the Eu³⁺ and Hf⁴⁺ cations over two crystallographic positions was refined.     

Electochemical characteristics of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript>/Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> battery with conducting polymeric binder

Lithium-ion battery based on LiMn₂O₄/Li₄Ti₅O₁₂ materials was assembled for the first time. The cathode and anode of this battery are prepared with the aqueous combined binder poly-3,4-ethylenedioxythiophene: polystyrene sulfonate/carboxymethylcellulose (without polyvinylidene fluoride). The capacity of the LiMn₂O₄/Li₄Ti₅O₁₂ battery was found to be 75 mA h g^–1 at 0.1 C and 55 mA h g^–1 at 1 C. A 95% capacity was retained after 100 charge-discharge cycles. The batteries demonstrated a high Coulombic efficiency close to 100%. Scanning electron microscopy demonstrated that using the conducting binder poly-3,4-ethylenedioxythiophene: polystyrene sulfonate/carboxymethylcellulose provides formation of dense compact layers of electrode materials with good adhesion to the substrate. The electrode structure remains maintained after 100 charge-discharge cycles.     

Reaction of the novel Ru<Subscript>3</Subscript>(CO)<Subscript>10</Subscript>[Ph<Subscript>2</Subscript>P(CH<Subscript>2</Subscript>)<Subscript>2</Subscript>Si(OEt<Subscript>3</Subscript>)]<Subscript>2</Subscript> complex on SBA-15 and MCM-41 mesoporous silicas

The reaction of Ru₃(CO)₁₂ with 2(diphenylphosphino)ethyl-triethoxysilane (DPTS) in hydrocarbons, leads to the functionalized Ru₃(CO)_12−n [Ph₂P(CH₂)₂Si(OEt₃)] _n (n = 1,2) complexes. The complex with two phosphine substituents was chemically anchored on mesoporous silicas, SBA-15 and MCM-41, in order to obtain two hybrid materials characterized by a different localization of the metal centre on the surface of the porous supports. A detailed investigation of the cluster, before and after chemical anchoring on the mesoporous silicas, was pursued. Particular attention was also devoted to the study of the morphological, structural and textural properties of the metal-functionalised silicas (Ru/SBA-15 and Ru/MCM-41) by infrared spectroscopy (FT-IR), scanning electron microscopy, X-ray diffraction and N₂ physisorption analysis.     

Whitlockite solid solutions in the Ca<Subscript>3</Subscript>(VO<Subscript>4</Subscript>)<Subscript>2</Subscript>-K<Subscript>3</Subscript>VO<Subscript>4</Subscript>-NdVO<Subscript>4</Subscript> system

Phase equilibria in the Ca₃(VO₄)₂-K₃VO₄-NdVO₄ system have been studied. An extensive calcium orthovanadate-based solid solution was found to form with the boundary compositions as follows: Ca₃(VO₄)₂-Ca₉Nd(VO₄)₇-Ca_9.33K_2.33(VO₄)₇-Ca_7.88K_2.63Nd_0.87(VO₄)₇. The unit cell parameters of the whit-lockite vanadates synthesized increase as the potassium and neodymium contents increase. Phase transitions from the low-temperature β phase to the β′ centrosymmetrical structure in Ca_{9.33 − 5z} K_{2.33 + z} Nd_3z (VO₄)₇ vanadates have been studied dilatometrically. The increase in the β ai β′ transition temperature caused by potassium is interpreted as arising from the filling in of vacant cation positions M(4) and M(6).     

Organic-inorganic hybrid perovskite (C<Subscript>6</Subscript>H<Subscript>5</Subscript>(CH<Subscript>2</Subscript>)<Subscript>2</Subscript>NH<Subscript>3</Subscript>)<Subscript>2</Subscript>CdCl<Subscript>4</Subscript>: Synthesis,structural and thermal properties

The present research work reports the study on crystal structure, vibrational spectroscopy and thermal analysis of organic-inorganic hybrid compound (C₆H₅(CH₂)₂NH₃)₂CdCl₄. Single crystals of bis(phenethylammonium)tetrachlorocadmate (C₆H₅(CH₂)₂NH₃)₂CdCl₄ (PEA–Cd) were obtained by diffusion at room temperature. This compound crystallizes in the orthorhombic space group C2cb with unit cell parameters a = 7.4444(2) Å, b = 38.8965(3) Å, c = 7.3737(2) Å and Z = 4. Single crystal structure has been solved and refined to R = 0.036 and wR = 0.092. The structure consists of an extended [CdCl₄]^2– network and two [C₆H₅(CH₂)₂NH₃]⁺ cations to form a two-dimensional perovskite system. The infrared (IR) spectrum of the title compound was recorded at room temperature. Differential scanning calorimetry (DSC) was used to investigate the phase transition; this compound exhibits a reversible single solid-solid phase transition.     

Behavior of silver sulfide in the system Ag<Subscript>2</Subscript>S-Fe(NO<Subscript>3</Subscript>)<Subscript>3</Subscript>-HNO<Subscript>3</Subscript>-H<Subscript>2</Subscript>O

Behavior of silver sulfide in the system Ag₂S-Fe(NO₃)₃-HNO₃-H₂O was studied at 25, 55, and 80°C using the method of the simplex-lattice experiment design. The quantitative dependences of Ag₂S oxidation on the concentrations of the acid and Fe³⁺ were determined. The isoconcentration diagrams were obtained.     

Adsorption behavior of <Superscript>99</Superscript>Tc on Fe,Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> and Fe<Subscript>2</Subscript>O<Subscript>4</Subscript>

Summary The adsorption of ⁹⁹Tc on the adsorbers Fe, Fe₂O₃ and Fe₃O₄ was studied by batch experiments under aerobic and anoxic conditions. The effects of pH and CO₃^2- concentration of the simulated ground water on the adsorption ratios were also investigated, and the valences of Tc in solution after the adsorption equilibrium were studied by solvent extraction. The adsorption isotherms of TcO₄- on the adsorbers Fe, Fe₂O₃ and Fe₃O₄ were determined. Experimental results have shown that the adsorption ratio of Tc on Fe decreases with the increase of pH in the range of 5-12 and increases with the decrease of the CO₃^2- concentration in the range of 10^-8M-10^-2M. Under aerobic conditions, the adsorption ratios of ⁹⁹Tc on Fe₂O₃ and Fe₃O₄ were not influenced by pH and CO₃^2-concentration. When Fe was used as adsorbent, Tc existed mainly in the form of Tc(IV) after equilibrium and in the form of Tc(VII) when the adsorbent was Fe₂O₃ or Fe₃O₄ under aerobic conditions. The adsorption ratios of Tc on Fe, Fe₂O₃ and Fe₃O₄ decreased with the increase of pH in the range of 5-12 and increased with the decrease of the CO₃^2- concentration in the range of 10^-8M-10^-2M under anoxic conditions. Tc existed mainly in the form of Tc(IV) after equilibrium when Fe, Fe₂O₃ and Fe₃O₄ was the adsorbent under anoxic conditions. The adsorption isotherms of TcO_4- on the adsorbers Fe, Fe₂O₃ and Fe₃O₄ are fairly in agreement with the Freundlich’s equation under both aerobic and anoxic conditions.