Kinetics of reduction of hexavalent neptunium by nitrous acid in solutions of nitric acid

Nitrous acid is a key redox controlling factor, affecting the speciation of neptunium in the reprocessing of used nuclear fuel by solvent extraction. The kinetics of the reduction of neptunium(VI) by nitrous acid in solutions of nitric acid was investigated spectrophotometrically by the method of initial rates. The reaction is of first order with respect to Np(VI) while the order with respect to HNO₂ is 1.20 ± 0.04. The reaction rate is almost inversely proportional to the hydrogen ion concentration (reaction order −0.92 ± 0.06), indicating that the reaction proceeds primarily through the reaction of neptunium(VI) with the nitrate anion. The experimental value of the rate constant k for the rate law −d[Np(VI)]/dt = k·[Np(VI)]·[HNO₂]^1.2/[H⁺] is of (0.159 ± 0.014) M^−0.2 s⁻¹ in I = 4 M and at 20 °C. The activation energy is (−57.3 ± 1.6) kJ/mol, which is in agreement with previous data on this reaction in perchloric acid.     

Inner-sphere oxidation of ternary nitrilotriacetatocobalt(II) complexes involving oxalate and phthalate by periodate

The oxidation of [Co^II(nta)(ox)(H₂O)₂]³⁻ and [Co^II(nta)(ph)(H₂O)₂]³⁻ (nta = nitrilotriacetate, ox = oxalic acid and ph = phthalic acid) by periodate have been studied kinetically in aqueous solution over 20–40 °C and a variety of pH ranges. The rate of oxidation of [Co^II(nta)(ox)(H₂O)₂]³⁻ by periodate, obeys the following equation: d[Co^III]/dt = [Co^II(nta)(ox)(H₂O)₂³⁻][H₅IO₆] {k ₄ K ₅ + (k ₅ K ₆ K ₂/[H⁺]} while the reaction of [Co^II(nta)(ph)(H₂O)₂]³⁻ with periodate in aqueous acidic medium obeys the following rate law: d[Co^III]/dt = k ₆ K ₈[Co^II]_T [I^VII]_T/{1 + [H⁺]/K ₇ + K ₈[I^VII] _T }. Initial cobalt(III) products were formed and slowly converted to final products, fitting an inner-sphere mechanism. Thermodynamic activation parameters have been calculated. A common mechanism for the oxidation of ternary nitrilotriacetatocobalt(II) complexes by periodate is proposed and supported by an excellent isokinetic relationship between ΔH* and ΔS* values for these reactions.     

"CAGE" VANADYL POLYCARBOXYLATE-THIOUREA COMPLEX FOR THE POLYMERIZATION OF ACRYLONITRILE

The polymerization of acrylonitrile (AN) in aqueous nitric acid initiated by " cage " vanadyl polycarboxylate (P=VO)-thiourea (TU) complex was investigated. The overall rate ofpolymerization isThe relationship between the induction period (τ) and the temperature of polymerization as well as the concentrations of reactants can be expressed as follows :The molecular weight of polyacrylonitrile increases with increasing monomer concentration and decreases with increasing temperature of polymerization and concentrations of vanadyl polycarboxylate and thioureaThe polymerization mechanism was proposed and discussed.     

Oxidation of Fursemide by Diperiodatocuprate(III) in Aqueous Alkaline Medium—a Kinetic Study

Fursemide is the chemical compound 4-chloro-2-(furan-2-ylmethylamino)-5-(aminosulfonyl) benzoic acid. It was oxidized by diperiodatocuprate(III) in alkali solutions, and the oxidation products were identified as furfuraldehyde and 2-amino-4-chloro-5-(aminosulfonyl) benzoic acid. The reaction kinetics were studied spectrophotometrically. The reaction was observed to be first order in [oxidant] and fractional order each in [fursemide] and [periodate], whereas added alkali retarded the rate of reaction. The reactive form of the oxidant was inferred to be [Cu(H₃IO₆)₂]⁻. A mechanism consistent with the experimental results was proposed, in which oxidant interacts with the substrate to give a complex as a pre-equilibrium state. This complex decomposed in a slow step to give a free radical that was further oxidized by reaction with another molecule of DPC to yield 2-amino-4-chloro-5-(aminosulfonyl) benzoic acid and furfuraldehyde in a fast step. This reaction was studied at 25, 30, 35, 40 and 45 °C, and the activation parameters E _a,ΔH ^#,ΔS ^# and ΔG ^# were determined to be 51 kJ⋅mol⁻¹,48.5 kJ⋅mol⁻¹,−63.5 J⋅K⁻¹⋅mol⁻¹ and 67 kJ⋅mol⁻¹, respectively. The value of log ₁₀ A was calculated to be 6.8.     

Adsorption behavior of rice husk for the decontamination of chromium from industrial effluents

Rice husk, an agricultural waste product, was studied as a potential decontaminant for chromium in the effluents of leather tanning industries. Physico-chemical parameters such as selection of appropriate electrolyte, shaking time, concentration of adsorbent and adsorbate were studied to optimize the best conditions in which this material can be utilized on commercial scale for the decontamination of effluents. The radiotracer technique was used to determine the distribution of chromium. In certain cases atomic absorption spectrophotometry was also employed. Maximum adsorption was observed at 0.01 mol·dm⁻³ acid solutions (HNO₃, HCl, H₂SO₄ and HClO₄) using 3.0 g of adsorbent for 2.73·10⁻³ mol·dm⁻³ chromium concentration in five minutes equilibration time. Studies show that the adsorption decreases with the increase in the concentrations of all the acids. The adsorption data follows the Freundlich isotherm over the range of 2.73·10⁻³ to 2.73·10⁻² mol·dm⁻³ chromium concentration. The characteristic Freundlich constants, i.e., 1/n=0.86±0.06 andA=2.35±0.06 mmol·g⁻¹ have been computed for the sorption system. Thermodynamic parameters, i.e., ΔG ⁰, ΔS ⁰ and ΔH ⁰ have also been calculated for the system. Application of the method to a test case of a medium size industry showed that 21 kg of rice husk was sufficient to maintain the NEQS limits of chromium for industrial effluents.     

Study on mechanism for oxidation of <Emphasis Type="Italic">N,N</Emphasis>-dimethylhydroxylamine by nitrous acid

The oxidation of N,N-dimethylhydroxylamine (DMHAN) by nitrous acid is investigated in perchloric acid and nitric acid medium, respectively. The effects of H⁺, DMHAN, ionic strength and temperature on the reaction are studied. The rate equation in perchloric acid medium has been determined to be −d[HNO₂]/dt = k[DMHAN][HNO₂], where k = 12.8 ± 1.0 (mol/L)⁻¹ min⁻¹ when the temperature is 18.5 °C and the ionic strength is 0.73 mol/L with an activation energy about 41.5 kJ mol⁻¹. The reaction becomes complicated when it is performed in nitric acid medium. When the molarity of HNO₃ is higher than 1.0 mol/L, nitrous acid will be produced via the reaction between nitric acid and DMHAN. The reaction products are analyzed and the reaction mechanism is discussed in this paper.     

Synthesis and thermal decomposition kinetics of La(III) complexwith unsymmetrical Schiff base ligand

A new unsymmetrical solid Schiff base (LLi) was synthesized using L-lysine, o-vanillin and 2-hydroxy-l-naphthaldehyde. Solid lanthanum(III) complex of this ligand [LaL(NO₃)]NO₃·2H₂O have been prepared and characterized by elemental analyses, IR, UV and molar conductance. The thermal decomposition kinetics of the complex for the second stage was studied under non-isothermal condition by TG and DTG methods. The kinetic equation may be expressed as: dα/dt=Ae^−E/RT(1−α)². The kinetic parameters (E, A), activation entropy ΔS ^# and activation free-energy ΔG ^# were also gained.     

Mechanism of Oxidation of <Emphasis Type="SmallCaps">L</Emphasis>-Cysteine by Hexachloroiridate(IV) — A Kinetic Study

The kinetics of oxidation of L-Cysteine in aqueous HClO₄ medium were studied using a one-equivalent oxidant, hexachloroiridate(IV). The reaction exhibits second-order dependence with respect to hexachloroiridate(IV) and first-order in cysteine. The rate decreases with increase in hydrogen ion concentration indicating that the zwitterionic form of cysteine is more reactive. Cysteic acid is identified as the product of oxidation. A suitable mechanism involving the formation of [IrCl₆]²⁻ – sulphur bonded intermediate is proposed. The activation parameters of the reaction are computed using the linear least squares method and the values of E_a and ΔS^# are found to be 27.97±1.82 kJ mol⁻¹ and −51.30±6.0 J K⁻¹mol⁻¹, respectively.     

Dissociation Quotients for Citric Acid in Aqueous Sodium Chloride Media to 150°C

The three molal dissociation quotients for citric acid were measured potentiometrically with a hydrogen-electrode concentration cell from 5 to 150°C in NaCl solutions at ionic strengths of 0.1, 0.3, 0.6, and 1 molal. The molal dissociation quotients and available literature data at infinite dilution were fitted by empirical equations in the all-anionic form involving an extended Debye-Hückel term and up to five adjustable parameters involving functions of temperature and ionic strength. This treatment yielded the following thermodynamic quantitites for the first dissociation equilibrium at 25°C: logK _1a=−3.127±0.002, ΔH _1a ^o =4.1±0.2 kJ-mol⁻¹, ΔS _1a ^o =−46.3±0.7 J-K⁻¹-mol⁻¹, and ΔCp _1a ^o =−162±7 J-K⁻¹-mol⁻¹; for the second acid dissociation equilibrium at 25°C: logK _2a =−4.759±0.001, ΔH _2a ^o =2.2±0.1, ΔS _2a ^o =−83.8±0.4, and ΔCp _2a ^o =−192±15, and for the third dissociation equilibrium at 25°C: logK _3a=−6.397±0.002, ΔH _3a ^o =−3.6±0.2, ΔS _3a ^o =−134.5±0.7, and ΔCp _3a ^o =−231±7.     

Kinetics of reductive stripping of Pu(IV) in the tributylphosphate-kerosene/nitric acid-water system using dihydroxyurea

The kinetics of the reductive stripping of plutonium(IV) by dihydroxyurea (DHU) in 30% TBP/kerosene-HNO₃ system was studied with a constant interfacial area cell. The stripping rate of plutonium(IV) increases with the increase of the stirring speed of two phases and the interfacial area. The activation energy of this process is 28.4 kJ/mol. Under the given experimental conditions, the mass transfer of Pu is not controlled by redox reaction, but controlled by molecular diffusion from the organic phase to organic film layer and from the aqueous film layer to aqueous phase. The rate equation of reductive stripping (process is controlled by diffusion) was obtained as: r ₀ = k′[Pu(IV)]₀[DHU]_a ^0.16[HNO₃]_a ^−0.34. The rate constant k′ is (5.0±0.4)·10⁻² (mol/L)^0.18·min⁻¹ at 18.0°C.     

Ligand Exchange Processes on Solvated Lithium Cations. II. Complexation by Cryptands in γ-Butyrolactone as Solvent

Kinetic studies on Li⁺ exchange between the cryptands C222 and C221, and γ-butyrolactone as solvent were performed as a function of ligand-to-metal ratio, temperature and pressure using ⁷Li NMR. The thermal rate and activation parameters are: C222: k ₂₉₈ = (3.3 ± 0.8)×10⁴ M⁻¹ s⁻¹, ΔH ^# = 35 ± 1 kJ mol⁻¹ and ΔS ^# = −41 ± 3 J K⁻¹ mol⁻¹; C221: k ₂₉₈ = 105 ± 32 M⁻¹ s⁻¹, ΔH ^# = 48 ± 1 kJ mol⁻¹ and ΔS ^# = −45 ± 2 J K⁻¹ mol⁻¹. Temperature and pressure dependence measurements were performed in the presence of an excess of Li⁺. The influence of pressure on the exchange rate is insignificant for both ligands, such that the value of activation volume is around zero within the experimental error limits. The activation parameters obtained in this study indicate that the exchange of Li⁺ between solvated and chelated Li⁺ ions follows an associative interchange mechanism. Electronic Supplementary Material Supplementary material is available to authorised users in the online version of this article at . For Part I see: R. Puchta, M. Galle, N.J.R. van Hommes, E. Pasgreta and R. van Eldik: Inorg. Chem. 43, 8227 (2004).     

Kinetics and mechanism of aqua ligand substitution from cis-diaqua(cis-1,2-diaminocyclohexane)platinum(II)perchlorate by diethyldithiocarbamate anion in aqueous medium

The kinetics of the interaction of diethyldithiocarbamate (Et₂DTC) with [Pt(dach)(H₂O)₂]²⁺ (dach = cis-1,2-diaminocyclohexane) have been studied spectrophotometrically as a function of [Pt(dach)(H₂O)₂ ²⁺], [Et₂DTC] and temperature at a particular pH (4.0). The reaction proceeds via rapid outer sphere association complex formation followed by two slow consecutive steps. The first step involves the transformation of the outer sphere complex into an inner sphere complex containing a Pt–S bond and one aqua ligand, while the second step involves chelation when the second aqua ligand is replaced. The association equilibrium constant K _E and two rate constants k ₁ and k ₂ have been evaluated. Activation parameters for both the steps have been calculated (∆H ₁ ^# = 66.8 ± 3.7 kJ mol⁻¹, ∆S ₁^# = −81 ± 12 JK⁻¹ mol⁻¹ and ∆H ₂^# = 95.1 ± 2.8 kJ mol⁻¹, ∆S ₂^# = −34.4 ± 9.1 JK⁻¹ mol⁻¹). The low enthalpy of activation and negative entropy of activation indicate an associative mode of activation for both the steps.     

Thermal decomposition of complexes of cadmium(II) and mercury(II) with triphenylphosphanes

A series of substituted triphenylphosphane complexes of the type CdL₂X₂ (L= triorthotolylphosphane or trimetatolylphosphane; X=Cl⁻, Br⁻ or I⁻) and HgL₂X₂ (L=triphenylphosphane or triorthotolylphosphane) was prepared fresh. The thermal decomposition was carried out in air with heating rate programmed at 10°C min⁻¹ and it revealed that the complexes with ortho derivative were less stable and the triphenylphosphane moiety leaves along with halogen in the first step. All the complexes were stable up to 210°C. However, the stability order of the tetrahedral complexes was X=Cl>Br. Values of n, E, lnA and ΔS ^# have been approximated and compared. Complexes having Br have higher E _a, lnA and ΔS ^# values than that having Cl.     

Extraction behavior of cerium by tetraoctyldiglycolamide from nitric acid solutions

The diamide N,N,N′,N′-tetraoctyldiglycolamide (TODGA) was synthesized and characterized. The prepared TODGA was applied for extraction of Ce(III) from nitric acid solutions. The equilibrium studies included the dependencies of cerium distribution ratio on nitric acid, TODGA, nitrate ion, hydrogen ion and cerous ion concentrations. Analysis of the results indicates that the main extracted species is Ce(TODGA)₂(NO₃)₃HNO₃. The capacity of Ce loading is approximately 45 mmol/L for 0.1 M solution of TODGA in n-hexane. Finally, the thermodynamic parameters were calculated: K (25 °C) = 3.8 × 10³, ΔH = −36.7 ± 1.0 kJ/mol, ΔS = −54.6 ± 3.0 J/K mol, and ΔG = −20.4 ± 0.1 kJ/mol.     

Syntheses,molecular structures and magnetic properties of two hybrid organic–inorganic salts of bis(maleonitriledithiolato)copper(II) and substituted benzyl-4-dimethylaminopyridinium cations

Two new hybrid organic–inorganic salts, [BzDMAP]₂[Cu(mnt)₂](1) and [NO₂BzDMAP]₂[Cu(mnt)₂] (2) ([BzDMAP]⁺ = 1-benzyl-4′-dimethylaminopyridinium, [NO₂BzDMAP]⁺ = 1-(4′-nitrobenzyl)-4′-dimethylaminopyridinium, and mnt²⁻ = maleonitriledithiolate) have been characterized structurally and magnetically. The [BzDMAP]⁺ or [NO₂BzDMAP]⁺ cations (C) and the [Cu(mnt)₂]²⁻ anions (A) in 1 and 2 stack into a 1D alternating CC-A-CC-A-CC column. The Cu···N, π···π, C–H···N, C–H···O, and C–H···S weak interactions play important roles in the molecular stacking and generate a 2D or 3D structure of 1 and 2. The magnetic susceptibilities of these salts measured in the temperature range 2.0–300 K show weak antiferromagnetic coupling features with θ = −2.370 K for 1 and −0.222 K for 2.     

Adsorption syntax of Au(III) on unloaded polyurethane foam

The nature of adsorption behavior of Au(III) on polyurethane (PUR) foam was studied in 0.2M HCl aqueous solution. The effect of shaking time and amount of adsorbent were optimized for 3.16·10⁻⁵M solution of Au(III) in 0.2M HCl. The classical Freundlich and Langmuir adsorption isotherms have been employed successfully. The Freundlich parameters 1/n and adsorption capacityK are 0.488±0.016 and (1.40±0.22)·10⁻² mol·g⁻¹, respectively. The Langmuir constants of saturation capacityM and binding energyb are (1.66±0.08)·10⁻⁴mol·g⁻¹ and 40294±2947 l·g⁻¹, respectively, indicating the monolayer chemical sorption. The mean free energy (E) of adsorption of Au(III) on PUR foam has been evaluated using D-R isotherm and found to be 11.5±0.16 kJ·mol⁻¹ reflecting the ion exchange type of chemical adsorption. The effect of temperature on the adsorption has also been studied. the isosteric heat of adsorption was found to be 44.03±1.66 kJ·mol⁻¹. The thermodynamic parameters of ΔG, ΔH, ΔS and equilibrium constantK _c have been calculated. The negative values of ΔG, ΔH and ΔS support that the adsorption of Au(III) on PUR foam is spontaneous, exothermic and of ion exchange chemisorption. The nature of the Au(III) species sorbed on PUR foam have been discussed.     

Syntheses,weak interactions, 3D network structures and magnetic properties of two salts based on bis(maleonitriledithiolate)copper(II) anion and substituted triphenylphosphonium cation

Two new salts, [BzTPP]₂[Cu(mnt)₂] (1) and [4NO₂BzTPP]₂[Cu(mnt)₂] (2) (BzTPP⁺ = benzyltriphenylphosphonium and mnt²⁻ = maleonitriledithiolate) have been prepared and characterized by elemental analyses, UV, IR, molar conductivity and single-crystal X-ray diffraction. The single-crystal structure analysis shows that 1 crystallizes in the monoclinic space group P2₁/n, while 2 crystallizes in the triclinic space group P−1. The effects of weak intramolecular interactions such as C–H···O, C–H···S, C–H···N, C–H···Cu hydrogen bonds and p···π, π···π stacking interactions in the solids generate a 3D network structure. It is noted that the change in the molecular topology of the counteraction when the 4-substituted group in the benzyl ring is changed from H to NO₂ results in differences in the crystal system, space group, weak interactions and the stacking mode of the cations and anions of 1 and 2. The magnetic susceptibilities of these salts measured in the temperature range 2.0 to 300 K show weak ferromagnetic coupling features with θ = 2.05 × 10⁻² K for 1 and 5.13 × 10⁻³ K for 2.     

Chromium(III) complexes with lutidinic acid: kinetic studies in HClO<Subscript>4</Subscript> and NaOH solutions

Chromium(III)-lutidinato complexes of general formula [Cr(lutH) _n (H₂O)_6−2n ]³⁻ⁿ (where lutH⁻ is N,O-bonded lutidinic acid anion) were obtained and characterized in solution. Acid-catalysed aquation of [Cr(lutH)₃]⁰ leads to only one ligand dissociation, whereas base hydrolysis produces chromates(III) as a result of subsequent ligand liberation steps. The kinetics of the first ligand dissociation were studied spectrophotometrically, within the 0.1–1.0 M HClO₄ and 0.4–1.0 M NaOH range. In acidic media, two reaction stages, the chelate-ring opening and the ligand dissociation, were characterized. The dependencies of pseudo-first-order rate constants on [H⁺] are as follows: k _obs1 = k ₁ + k ₋₁/K ₁[H⁺] and k _obs2 = k ₂ K ₂[H⁺]/(1 + K ₂[H⁺]), where k ₁ and k ₂ are the rate constants for the chelate-ring opening and the ligand dissociation, respectively, k ₋₁ is the rate constant for the chelate-ring closure, and K ₁ and K ₂ are the protonation constants of the pyridine nitrogen atom and coordinated 2-carboxylate group in the one-end bonded intermediate, respectively. In alkaline media, the rate constant for the first ligand dissociation depends on [OH⁻]: k _obs1 = k _OH(1) + k _O[OH⁻], where k _OH(1) and k _O are rate constants of the first ligand liberation from the hydroxo- and oxo-forms of the intermediate, respectively, and K ₂ is an equilibrium constant between these two protolytic forms. Kinetic parameters were determined and a mechanism for the first ligand dissociation is proposed. The kinetics of the ligand liberation from [Cr(lut)(OH)₄]³⁻ were also studied and the values of the pseudo-first-order rate constants are [OH⁻] independent.     

Hydroxylamine derivative in Purex Process

The kinetics of oxidation-reduction reactions between N,N-diethylhydroxylamine (DEHAN) and plutonium(IV) in nitric acid solution have been studied by spectrophotometry at 25.2 °C. The initial rate equation of the reaction is -d[Pu(IV)]/dt=k ₀[Pu(IV)]²[DEHAN]^1.26/[H⁺]^2.53, where the rate constant of the reaction (k ₀) is (5.93±0.84)^.10³ (mol/l)^0.27 min^-1. The complete rate equation and the rate constants of the reaction are also derived.     

Synthesis and characterization of two inorganic–organic hybrid polyoxometalates bridged by Keggin-type building blocks and copper(II) organonitrogen complexes

Two new inorganic–organic hybrid compounds, namely [Cu(dab)₂]₂[α-SiW₁₂O₄₀]·H₂O (dab = 1,2-diaminobenzene) and [Cu(dafo)₃]₂[Cu(dafo)₂(H₂O)₂][α-PMo₁₂O₄₀]₂·4H₂O (dafo = 4,5-diaza- fluorene-9-one) have been synthesized under hydrothermal conditions and structurally characterized by single-crystal X-ray diffraction. [Cu(dab)₂]₂[α-SiW₁₂O₄₀]·H₂O exhibits an alternating 2D ladder-like structure built of [α-SiW₁₂O₄₀]⁴⁻ and [Cu(L)₂]²⁺ units. As the inorganic building block, the Keggin-type polyoxoanion [α-SiW₁₂O₄₀]⁴⁻ is linked to two metal–organic complexes [Cu(dab)₂]²⁺ through different kinds of oxygen atoms (terminal and bridging). [Cu(dafo)₃]₂[Cu(dafo)₂(H₂O)₂][α-PMo₁₂O₄₀]₂·4H₂O shows an extended 3D supramolecular network via hydrogen bonding. Both complexes were characterized by physico-chemical and spectroscopic methods.