Oxygen abstraction from tetrahydrofuran by molybdenum-iodide complexes. X-ray molecular structure of [Mo2(μ-O)(μ-I)(μ-O2CCH3)I2(THF)4][MoOI4(THF)] (THF = tetrahydrofuran)

The interaction between Mo₂(O₂CCH₃)₄, Me₃SiI and I₂ in THF resulted in oxygen abstraction from the solvent and formation of [Mo₂(μ-O)(μ-I)(μ-O₂CCH₃) I₂(THF)₄]⁺[MoOI₄(THF)]⁻ and I---(CH₂)₄---I. The molybdenum complex has been characterized by X-ray diffractometry. Crystal data: triclinic, space group P , a = 13.827(3) Å; b = 15.803(7) Å; c = 9.950(3) Å; = 93.34(4)°; β = 102.40(2)°; γ = 90.09(2)°; V = 2120(2) Å₃; Z = 2; d_calc = 2.559 g cm⁻³; R = 0.0476 (R_w = 0.0613) for 370 parameters and 3938 data with F₀²> 3σ(F₀²). The metal-metal distance in the cation is 2.527(2) Å and indicates a strong interaction. The magnetic behavior is consistent with the assignment of one unpaired electron to the Mo₂⁷⁺ core of the cation and one to the d¹ Mo(V) center of the anion. The interaction between Mo(CO)₆ and I₂ in THF also results in the formation of 1,4-diiodobutane.     

Structure and properties of the dinuclear complex [Co2(μ-OAc)2(OAc)2(μ-H2O)(phen)2]

The dinuclear complex [Co₂(μ-OAc)₂(OAc)₂(μ-H₂O)(phen)₂] has been prepared and its structure was determined. The compound crystallizes in the monoclinic space group P2(1)/c. The Co–Co distance is 3.574 Å and is similar to the Fe–Fe distance in the reduced methane monooxygenase hydroxylase. The electronic and IR spectra of the complex confirm octahedral coordination of the cobalt atoms and formation of strong O–HO hydrogen bonds in the solid state. The dependence of the magnetic susceptibility of the complex on temperature indicates an antiferromagnetic interaction, the value of the isotropic exchange parameter J was estimated to be −2.1 cm⁻¹. The ¹H NMR spectra show that in organic solvents the structure of compound is the same as in the solid state, however, in water solution the complex dissociates giving compounds with different Co:phen ratios.     

Substituted cyclopentadienyl ligands—10. Intramolecular steric interactions in [(η-C5H3(SiMe3)2)Mo(CO)2(L)I]

Reaction of C₅H₄(SiMe₃)₂ with Mo(CO)₆ yielded [(η⁵-C₅H₃(SiMe₃)₂)Mo(CO)₃]₂, which on addition of iodine gave [(η⁵-C₅H₃(SiMe₃)₂Mo(CO)₃I]. Carbonyl displacement by a range of ligands: [L = P(OMe)₃, P(OPrⁱ)₃,P(O-o-tol)₃, PMe₃, PMe₂Ph, PMePh₂, PPh₃, P(m-tol)₃] gave the new complexes [(η⁵-C₅H₃(SiMe₃)₂ MO(CO)₂(L)I]. For all the trans isomer was the dominant, if not exclusive, isomer formed in the reaction. An NOE spectral analysis of [(η⁵-C₅H₃(SiMe₃)₂)Mo(CO)₂(L)I] L = PMe₂Ph, P(OMe)₃] revealed that the L group resided on the sterically uncongested side of the cyclopentadienyl ligand and that the ligand did not access the congested side of the molecule. Quantification of this phenomenon [L = P(OMe)₃] was achieved by means of the vertex angle of overlap methodology. This methodology revealed a steric preference with the trans isomer (less congestion of CO than I with an SiMe₃ group) being the more stable isomer for L = P(OMe)₃.     

The evaluation of singlet-triplet separations for [W2(μ-H)(μ-Cl)Cl4(μ-dppm)2] and [W2(μ-H)2 (μ-O2CC6H5)2(P(C6H5)3)2] based on P NMR and crystallographic data

The singlet-triplet separations for the edge-sharing bioctahedral (ESBO) complex W₂(μ-H)(μ-Cl)(Cl₄(μ-dppm)₂ · (THF)₃ (II) has been studied by ³¹P NMR spectroscopy. The structural characterization of [W₂(μ-H)₂(μ-O₂CC₆H₅)₂Cl₂(P(C₆H₅)₃)₂] (I) by single-crystal X-ray crystallography has allowed the comparison of the energy of the HOMOLUMO separation determined using the Fenske-Hall method for a series of ESBO complexes with two hydride bridging atoms, two chloride bridging atoms and the mixed case with a chloride and hydride bridging atom. The complex representing the mixed case, [W₂(μ-H)(μ-Cl)Cl₄(μ-dppm)₂ · (THF)₃] (II), has been synthesized and the value of −2J determined from variable-temperature ³¹P NMR spectroscopy.     

Electrochemical studies on Mo2Cl4(PR3)4 compounds containing phosphines of varied basicity

The electrochemical behaviour of a series of Mo₂Cl₄(PR₃)₄ complexes (PR₃ = PMe₃, PEt₃, PPrⁿ₃,PBuⁿ₃, PH₂Ph, PMe₂Ph, PEt₂Ph, PHPh₂, PMePh₂, PEtPh₂, P(OMe)₃, P(OMe)Ph₂) has been examined by cyclic voltammetry in dichloromethane solution. The phosphines were chosen to provide a wide range of Lewis basicity/π acidity as reflected by Tolman's _co IR and Bodner's Δδ_co ¹³C NMR spectral parameters for Ni(CO)₃(PR₃). The Mo₂ compounds undergo either quasi-reversible or irreversible one-electron oxidations except for P(OMe)₃ and P(OMe)Ph₂ for which no clectroactivity was observed before the solvent limit. The anodic peak potentials, E_p,a, span a range of nearly 700 mV. The half-wave potentials, E_1/2,for the quasi-reversible couples and E_p,a for all were plotted against the IR and NMR values and against the δ → δ* transition energies for the Mo₂ species in dichloromethane and in the solid state. For the organometallic spectral parameters excellent linear correlations were obtained while with the electronic spectral data fair correlations resulted. These results indicate that the Mo₂Cl₄(PR₃)₄ complexes become more difficult to oxidize as the electron-withdrawing nature of the PR₃ substituents increases and the δ → δ* band energy decreases.     

Synthesis and application of diphenylbis (3,5-dimethylpyrazol-1-yl)methane to form η-arene complexes of molybdenum

The neutral nitrogen-bidentate ligand, diphenylbis(3,5-dimethylpyrazol-1-yl)methane, Ph₂CPz′₂, can readily be obtained by the reaction of Ph₂CCl₂ with excess HPz′ in a mixed-solvent system of toluene and triethylamine. It reacts with [Mo(CO)₆] in 1,2-dimethoxyethane to give the η²-arene complex, [Mo(Ph₂CPz′₂)(CO)₃] (1). This η²-ligation appears to stabilize the coordination of Ph₂CPz′ ₂ in forming [Mo(Ph₂CPz′₂)(CO)₂(N₂C₆H₄NO₂-p)][BPh₄] (2) and [Mo(Ph₂CPz′₂)(CO)₂(N₂Ph)] [BF₄] (3) from the reaction of 1 with the appropriate diazonium salt but the stabilization seems not strong enough when [Mo{P(OMe)₃} ₃(CO)₃] is formed from the reaction of 1 with P(OMe)₃. The solid-state structures of 1 and 3 have been determined by X-ray crystallography: 1-CH₂Cl₂, monoclinic, P2₁/n, a = 11.814(3), b = 11.7929(12), c = 19.46 0(6) Å, β = 95.605(24)°, V = 2698.2(11) ų, Z = 4, D_calc = 1.530 g/cm³ , R = 0.044, R_w = 0.036 based on 3218 reflections with I > 2σ(I); 2 (3)-1/2 hexane-1/2 CH₃OH-1/2 H₂O-1 CH₂Cl₂, monoclinic, C2/c, a = 41.766(10), b = 20.518(4), c = 16.784(3) Å, β = 101.871(18)°, V = 14076(5) ų, Z = 8, D_calc = 1.457 g/cm³, R = 0.064, R_w = 0.059 based on 5865 reflections with I > 2σ(I). Two independent cations were found in the asymmetric unit of the crystals of 3. The average distance between the Mo and the two η²-ligated carbon atoms is 2.574 Å in 1 and 2.581 and 2.608 Å in 3. The unfavourable disposition of the η²-phenyl group with respect to the metal centre in 3 and the rigidity of the η²-arene ligation excludes the possibility of any appreciable agostic C---H → Mo interaction.     

Synthesis and characterization of hydroxo, pyrazolato and carboxylato derivatives of the PdR(PPh3)moiety (R = C6F5 or C6Cl5)

The hydroxo-complexes [{PdR(PPh₃)(μ-OH)}₂] (R = C₆F₅ or C₆Cl₅) have been obtained by reaction of the corresponding [{PdR(PPh₃)(μ-Cl)}2] complexes with NBu₄OH in acetone. In this solvent, the reaction of the hydroxo-bridged complexes with pyrazole (Hpz) and 3,5-dimethylpyrazole (Hdmpz) in 1:2 molar ratio leads to the formation of the new complexes [{Pd(C₅F₅)(PPh₃)(μ-azolate)}2] and [{Pd(C₆Cl₅)(PPh₃)}₂(μ-OH)(μ-azolate)] (azolate = pz or dmpz). The reaction of the bis(μ-hydroxo) complexes with Hpz and Hdmpz in acetone in 1:1 molar ratio has also been studied, and the resulting product depends on the organic radical (C₆F₅ or C₆Cl₅) as well as the azolate (pz or dmpz). The identity of the isomer obtained has been established in every case by NMR (¹H, ¹⁹F and ³¹P) spectroscopy. The reaction of the bis(μ-hydroxo) complexes with oxalic (H₂Ox) and acetic (HOAc) acids yields the binucle ar complexes [{PdR(PPh₃)}2(μ-Ox)] (R = C₆F₅ or C₆Cl₅) and [{Pd(C₆F₅)(PPh₃)(μ-OAc)}2], respectively. [{Pd(C₆F₅)(PPh₃)(μ-OH)}₂] reacts with PPh₃ in acetone in 1:2 ratio giving the mononuclear complex trans-[Pd(C₆F₅) (OH)(PPh₃)₂], whereas the pentachlorophenylhydroxo complex does not react with PPh₃, even under forcing conditions.     

Photochemical synthesis and structural characterization of (η-C5Me5)3Mo3(CO)4(μ2-H)(μ3-O): an unprecedented 46-electron trimolybdenum cluster containing a localized monoprotonated Mo---Mo double bond

Irradiation of the 30-electron Mo₂(η⁵-C₅Me₅)₂(CO)₄ and Re₂(CO)₁₀ in toluene solution (containing H₂O) afforded (in 1–2% yields) a novel triangular metal cluster, (η⁵-C₅Me₅)₃Mo₃(CO)₄(η₂-H)(η₃-O) (1), which was characterized by a single-crystal X-ray diffraction study. Compound 1, of pseudo C_s-m symmetry, has a triangulo-Mo₃(η₃-O) core with composite Mo---H---Mo and Mo---Mo electron-pair bonds along one unusually short edge (2.660(1) Å) and Mo--- electron-pair bonds along the other two edges (2.916(1) and 2.917(1) Å). The edge-bridged hydride ligand, which displays a characteristic high-field proton NMR resonance at δ −17.79 ppm, was not found from the crystallographic determination but was located via a quantitative potential-energy-minimization method. This procedure unambiguously established that the optimized hydrogen position, which corresponds to a distinct coordination site with identical Mo---H distances of 1.85 Å, is the only one that can be sterically occupied by a metal-bound hydride ligand. This 46-electron species is the first electron-deficient trimolybdenum cluster containing a monoprotonated Mo---Mo double bond; its existence is attributed to ligand overcrowding due to the bulky pentamethylcyclopentadienyl rings. Black (η⁵- C₅Me₅)₃Mo₃(CO)₄(η₂-H)(η₃-O) · 1/2THF crystallizes with two formula species in a triclinic unit cell of P1 symmetry with a 8.603(4), b 11.115(4), c 19.412(11) Å, 80.69(4)°, β 101.10(4)°, and γ 98.88(3)° at −40° C. Least-squares refinement (RAELS with 221 variables) of one independent Mo₃ molecule and a centrosymmetrically-disordered THF molecule converged at R₁(F) 5.62%, R₂(F 6.88% for 8460 independent diffractometry data (I₀ ρ 3σ(I₀ collected at −40° C with Mo-K radiation     

Synthesis and characterisation of the methylene-inserted mixed-chalcogenide compounds Fe2(CO)6(μ-SeCH2Te) and Fe2(CO)6(μ-SCH2Te)

The methylene-bridged, mixed-chalogen compounds Fe₂(CO)₆(μ-SeCH₂Te) (1) and Fe₂(CO)₆(μ-SCH₂Te) (3) have been synthesised from the room temperature reaction of diazomethane with Fe₂(CO)₆(μ-SeTe) and Fe₂(CO)₆(μ-STe), respectively. Compounds 1 and 3 have been characterised by IR, ¹H, ¹³C, ⁷⁷Se and ¹²⁵Te NMR spectroscopy. The structure of 1 has been elucidated by X-ray crystallography. The crystalsare monoclinic,space group P2₁/n, A = 6.695(2), B = 13.993(5), C = 14.007(4)Å, β = 103.03(2)°, V = 1278(7) ų, Z = 4, D_c = 2.599 g cm⁻³ and R = 0.030 (R_w = 0.047).     

Structural characterisation of [Pt(NH3)4]2[W(CN)8][NO3]·2H2O donor–acceptor complex

The bimetallic [Pt(NH₃)₄]₂[W(CN)₈][NO₃]·2H₂O is characterised by single-crystal X-ray diffraction [S.G.P2₁/m(11), a=8.0418(7), b=19.122(2), c=9.0812(6) Å, Z=2]. All platinum centres have the square-plane D_4h geometry with average dimensions Pt(1)–N 2.042(2) and Pt(2)–N 2.037(10) Å. The octacyanotungstate anion has the square-antiprismatic D_4d configuration with average dimensions W(1)–C 2.164(13), C–N 1.140(12), W(1)–N 3.303(5) Å. The structure exhibits two different mutual orientations of Pt versus W units resulting in Pt(2)–W(1), W(1)^* separations of 4.77(2), 4.55(2)^* and Pt(1)–W(1) of 6.331(8) Å. A centrosymmetric structure reveals groups of two distinct columns: the first is formed by intercalated NO₃⁻ between parallel [Pt(1)(NH₃)₄]²⁺ planes and the second consists of [W(CN)₈]³⁻ interlayered by, parallel to square faces of W-antiprisms, [Pt(2)(NH₃)₄]²⁺. The structure is stabilised through a three-dimensional hydrogen bond network via nitrogen atoms of cyanide ligands, hydrogen atoms of NH₃ ligands, water molecules and oxygen atoms of NO₃⁻ counteranions. The vibrational pattern and the range of ν(CN) frequencies attributable to the electronic environment of W(V) and W(IV) are consistent with the ground state Pt(II)↔W(V) charge transfer.     

Tert-butylbenzamidate diruthenium(II, III) compounds. Crystal structure of [Ru2(μ-HNOCC6H4-p-CMe3)4(OPPh3)2]BF4

The reaction between Ru₂Cl(μ-O₂CCH₃)₄ and molten p-tert-butylbenzamide led to the formation of Ru₂Cl(μ-HNOCC₆H₄-p-CMe₃)₄. The polymeric structure of this insoluble compound was broken with AgBF₄, in anhydrous thf, giving [Ru₂(μ-HNOCC₆ H₄-p-CMe₃)₄(thf)₂]BF₄. The reaction of this cationic complex with OPPh₃ gave [Ru₂(μ-HNOCC₆H₄-p-CMe₃)₄(OPPh₃)₂]BF₄. The compounds have been characterized by elemental analysis, spectroscopic data and magnetic measurements and the crystal structure of [Ru₂(μ-HNOCC₆H₄-p-CMe₃)₄(OPPh₃)₂]BF₄ was determined by X-ray crystallography. The asymmetric unit is composed of halves of two different crystallographically independent centrosymmetric cations. Each ruthenium(II,III) dimer is bonded to four bridging p-tert-butylbenzamidate ligands and to two axial triphenylphosphine oxide molecules. The Ru---Ru distances in the two dimeric cations of the unit cell are 2.281(2) and 2.280(2) Å. The compound has a non-polar 2 : 2 arrangement of the tert-butylbenzamidate ligands.     

Synthesis and structure of the iron-substituted silylacetylene [(η-C5H5)Fe(CO)2SiMe2C]2 and its cobalt hexacarbonyl derivative [(η-C5H5)Fe(CO)2SiMe2C]2 · Co2(CO)6

A transition metal-substituted silylacetylene [(η⁵-C₅H₅)Fe(CO)₂SiMe₂C]₂, [FpMe₂SiC]₂ (I) was synthesized and characterized spectroscopically and structurally. I crystallized in the monoclinic space group P2₁/n, A = 13.011(3) Å B = 12.912(3) Å, C = 13.175(5) Å, β = 94.95(2). The acetylene linkage is reactive toward Co₂(CO)₈ to form I. Co₂(CO)₆ (II) which was also characterized spectroscopically and by single crystal X-ray diffraction. II crystallized in the orthorhombic space group Pbca, A = 17.64(2) Å, B = 14.225(10) Å, C = 24.49(2) Å.     

Synthesis and molecular structure of Ba5(μ5-OH)[μ3-OCH(CF3)2]4[μ2-OCH(CF3)2]4 [OCH(CF3)2](THF)4(H2O)·THF: a source of barium fluoride

The reaction between metallic barium and fluoroisopropanol or alcoholysis of [Ba(OPrⁱ)₂] produces a pentanuclear fluoroalkoxide. Its X-ray structure determination showed its formulation to correspond to Ba₅(μ₅-OH)[μ₃-OCH(CF₃)₂]₄[μ₂-OCH(CF₃)₂]₄ [OCH(CF₃)₂](THF)₄(H₂O)·THF. The metallic core is based on a square pyramid encapsulating an hydroxo ligand. In addition to the barium---alkoxide bonds [2.53(3)–2.86(3) Å] neutral O-donors, four THF [2.82(2)–2.86(3) Å] and one H₂O [2.79(3) Å] and secondary barium---fluorine interactions [2.99(2)–3.31(2) Å] ensure high coordination numbers, from 9 to 11 for the metal centers. Hydrogen bonding between the apical fluoroisopropoxide, the water molecule and one THF molecule, non-bonded to a metal center, accounts for the stability of the hydrate and illustrates the Lewis acidity of fluoroalkoxides. Thermal decomposition leads to BaF₂.     

Synthesis, crystal structure and third-order non-linear optical property of heterobimetallic cluster compound [MoOICu3S3(2,2′-bipy)2]

Nest-shaped cluster [MoOICu₃S₃(2,2′-bipy)₂] (1) was synthesized by the treatment of (NH₄)₂MoS₄, CuI, (n-Bu)₄NI, and 2,2′-bipyridine (2,2′-bipy) through a solid-state reaction. It crystallizes in monoclinic space group P2₁/n, a=9.591(2) Å, b=14.820(3) Å, c=17.951(4) Å, β=91.98(2)°, V=2549.9(10) ų, and Z=4. The nest-shaped cluster was obtained for the first time with a neutral skeleton containing 2,2′-bipy ligand. The non-linear optical (NLO) property of [MoOICu₃S₃(2,2′-bipy)₂] in DMF solution was measured by using a Z-scan technique with 15 ns and 532 nm laser pulses. The cluster has large third-order NLO absorption and the third-order NLO refraction, its ₂ and n₂ values were calculated as 6.2×10⁻¹⁰ and −3.8×10⁻¹⁷ m² W⁻¹ in a 3.7×10⁻⁴ M DMF solution.     

The crystal structure of (η-C6Me6)Ti[(μ-Cl)2(AlClEt)]2 and the catalytic activity of the (C6Me6)TiAl2Cl8−xEtx(x = 0---4) complexes towards butadiene

The composition of (C₆Me₆)TiAl₂Cl_8−xEt_x complexes in (C₆Me₆)TiAl₂Cl₈ + n Et₃Al (n = 0.5-6) systems was studied by UV-Vis spectroscopy and the X-ray crystal structure of one of them, (η⁶-C₆Me₆)Ti[(μ-Cl)₂(AlClEt)]₂ (IIa-2), has been determined. The complex crystallizes in the orthorhombic space group Pna2₁ with Z = 4 and lattice parameters a 15.634(3), b 11.355(2), c 14.417(2) Å. The ethyl groups of IIa-2 reside in outer positions of aluminate ligands farther away from the C₆Me₆ ligand. The other part of the complex does not differ remarkably from structures of other (arene)Ti^II complexes. Negligible activity of (C₆Me₆)TiAl₂Cl₈ towards the butadiene cyclotrimerization is considerably increased by addition of 2.5–3.0 equivalents of Et₃Al. As follows from UV-Vis spectra, such systems contain mainly the (C₆Me₆)TiAl₂Cl₅Et₃ complex. It is suggested that the introduction of three Et substituents destabilizes the Ti-(η⁶-C₆Me₆) bond so that the replacement of hexamethylbenzene by butadiene in the first step of a catalytic cycle becomes more feasible.     

Platination of [3-X-7,8-Ph2-7,8-nido-C2B9H8] (X=Et, F): Synthesis and characterisation of slipped and 1,2→1,7 isomerised products

The reaction of the labelled carborane ligand [3-Et-7,8-Ph₂-7,8-nido-C₂B₉H₈]²⁻ with a source of {Pt(PMe₂Ph)₂}²⁺ affords non-isomerised 1,2-Ph₂-3,3-(PMe₂Ph)₂-6-Et-3,1,2-closo-PtC₂B₉H₈ (1). The analogous reaction between [3-F-7,8-Ph₂-7,8-nido-C₂B₉H₈]²⁻ and {Pt(PMe₂Ph)₂}²⁺ yields 1,8-Ph₂-2,2-(PMe₂Ph)₂-4-F-2,1,8-closo-PtC₂B₉H₈ (3). Compound 1 has a heavily slipped structure (Δ 0.72 Å), which to some degree obviates the need for C atom isomerisation. However, that it is a kinetic product of the reaction is evident from the fact that it reverts to isomerised 1,8-Ph₂-2,2-(PMe₂Ph)₂-4-Et-2,1,8-closo-PtC₂B₉H₈ (2) slowly at room temperature but more rapidly with gentle warming. The heteroatom and labelled-B atom positions in the isomerised compounds 2 and 3 may be explained most simply by the rotation of a CB₂ face of an intermediate based on the structure of 1. Compounds 1–3 were characterised by a combination of spectroscopic and crystallographic techniques.     

Synthesis and structure of a new selenium-bridged tungsten cluster, [W3Se7(S2P(OEt)2)3]Br

[W₃Se₇(S₂P(OEt)₂)₃]Br was prepared by reacting (Et₄N)₂W₃Se₇Br₆ with KS₂P (OEt)₂ in CH₃CN and its crystal structure determined. In the [W₃(μ₃-Se)(μ₂-Se₂)₃]⁴⁺ core the W---W bond length is 2.755(5)-2.764(6) Å and the Se---Se bond length is 2.32(1)- 2.34(4) Å.     

Interaction of half-sandwich alkylmolybdenum(III) complexes with B(C6F5)3. The X-ray structure of [CpMo(η-C4H6)(μ-Cl)(μ-CH2)(O)MoCp][CH3B(C6F5)3]

The reactions of the half-sandwich molybdenum(III) complexes CpMo(η⁴-C₄H₄R₂)(CH₃)₂, where Cp=η⁵-C₅H₅ and R=H or CH₃, with equimolar amounts of B(C₆F₅)₃ have been investigated in toluene. EPR monitoring shows the formation of an addition product which does not readily react with Lewis bases such as ethylene, pyridine, or PMe₃. The analysis of the EPR properties and the X-ray structure of a decomposition product obtained from dichloromethane, [CpMo(η⁴-C₄H₆)(μ-Cl)(μ-CH₂)(O)MoCp][CH₃B(C₆F₅)₃], indicate that the borane attack has occurred at the methyl position.     

Das Reaktionsverhalten von Cp2NbCl2 gegenüber WF6—Struktur von [Cp2NbCl2]4[WF6]2[WCl6]

The oxidation of Cp₂NbCl₂ with pure WF₆ in SO₂ solution yielded the cationic metallocene species [Cp₂NbCl₂]⁺[WF₆]⁻ essentially in quantitative yield. The same reaction carried out in the presence of either equimolar amounts or a two-fold excess of HCN led to the preparation of the new niobocenium salt [Cp₂NbCl₂]₄⁺[WF₆]²⁻ which was studied by single crystal X-ray diffraction. This compound represents the first example of a structurally characterized metallocene-WF₆⁻ complex, and crystallizes in the tetragonal system: space group, P4₁2₁2(No. 92), a = 11.083(8) Å, c = 48.285 (9) Å; Z = 8; R = 0.0759, R_W = 0.0841. ab]Die Oxidation von Cp₂NbCl₂ mit reinem WF₆ führt in SO₂-Lösung zur Synthese von [Cp₂NbCl₂ ]⁺[WF₆]⁻ in nahezu quantitativer Ausbeute. Die analoge Reaktion führt unter Anwesenheit der äquimolaren Menge oder eines zweifachen Überschusses an HCN zur Ausbildung des Niobocenium-Komplexsalzes [Cp₂NbCl₂]₄⁺ [WF₆]₂⁻[WCl₆]²⁻, von dem eine Röntgenstrukturanalyse angefertigt wurde. Diese Verbindung repräsentiert den ersten structurell charakterisierten Vertreter eines Metallocen-WF₆⁻-Komplexes und kristallisiert im tetragonalen System: Raumgruppe P4₁2₁2 (Nr. 92), a = 11.083(8) Å, c = 48.285(9) Å; Z = 8; R = 0.0759, R_W = 0.0841. kw]Niobium; X-ray diffraction; Oxidation; Metallocenes     

A localized molecular orbital study on the bonding of> Mo3S4]2Mo> and> Mo3S4]CuI> versus (C6H6)2Cr and C6H6Cr(CO)3

The energy-localized CNDO/2 molecular orbitais have been calculated for the clusters containing molybdenum, > {Mo₃S₄₂Mo}⁸⁺ and> Mo₃S₄]CuI> ⁴⁺, versus the prototype arene-metal sandwich (C₆H₆)₂Cr and half-sandwich complexes C₆H₆Cr(CO)₃. The bonding characteristics of these compounds are described from a localization bonding viewpoint. There are two typical M-arene and M-[Mo₃S₄] bondings. One is formed by electron donation from the three-center two-electron π-bonds in the arene or [Mo₃S₄]⁴⁺ ligands into the vacant hybrid orbitais of the “stranger” metal atom. In the other M-arene or M-[Mo₃S₄] bond there is very little donation by the lone electron pair occupying the d AOs of the “stranger” metal atom to the arene or [Mo₃S₄]⁴⁺ ligands. The analogy of the ligand [Mo₃S₄]⁴⁺ in the clusters studied with the ligand benzene is also briefly discussed.