Ligandless C‐C bond formation via Suzuki–Miyaura reaction in micelles or water–ethanol solution using PdPtZn and PdZn nanoparticle thin films

PdPtZn and PdZn nanoparticle (NP) thin films were synthesized by the reduction of [PdCl₂(cod)], [PtCl₂(cod)] (cod = cis,cis‐1,5‐cyclooctadiene) and [Zn(acac)₂] (acac = acetylacetonate) complexes at an oil–water interface. The structure and morphology of the as‐prepared NPs were characterized with X‐ray diffraction, transmission electron microscopy and energy dispersive analysis of X‐rays. Catalytic activity of the prepared NPs was investigated in the Suzuki–Miyaura cross‐coupling reaction in H₂O–EtOH and various micellar media systems such as cetyltrimethylammonium bromide (cationic surfactant), sodium dodecylsulfate (anionic surfactant) and Pluronic P123 (non‐ionic surfactant). PdPtZn and PdZn thin films exhibited higher catalytic activity compared to Pd thin film in the Suzuki–Miyaura coupling reaction due to the appropriate interaction between palladium, platinum and zinc metals. Copyright © 2015 John Wiley & Sons, Ltd.     

Effect of addition of iron on morphology and catalytic activity of PdCu nanoalloy thin film as catalyst in Sonogashira coupling reaction

Palladium‐supported catalysts are complex assemblies with a challenging preparation. Minor changes in their preparation conditions can affect the activity, selectivity and lifetime of these catalysts. PdCuFe nanoparticle (NP) thin films were supported on reduced graphene oxide (RGO) by the reduction of the organometallic complex [PdCl_2‌(cod)] (cod = cis ,cis ‐1,5‐cyclooctadiene), and [Cu(acac)₂] and [Fe(acac)₃] (acac = acetylacetonate) complexes at a toluene–water interface. We have investigated the application of the liquid–liquid interface method for preparing ultrathin films of catalysts and have evaluated the catalytic activity of the prepared NPs for the Sonogashira coupling reaction in micelle media. Also, we have investigated the effect of the addition of iron on the morphology, size and catalytic activity of PdCu/RGO NPs. Our study shows that both of the prepared catalysts (PdCu/RGO and PdCuFe/RGO) are efficient and recoverable catalysts for the Sonogashira carbon–carbon coupling reaction. This method has advantages compared to other routes, such as short reaction times, high to excellent yields, facile and low‐cost method for the preparation of the catalysts, and easy separation and reusability of the catalysts.     

Palladium–cadmium sulfide nanopowder at oil–water interface as an effective catalyst for Suzuki–Miyaura reactions

A simple and effective strategy is described for the synthesis of Pd–CdS nanopowder by the reduction of an organopalladium(II) complex, [PdCl₂(cod)] (cod = cis ,cis ‐1,5‐cyclooctadiene), in the presence of CdS quantum dots (QDs) at a toluene–water interface. We investigated the impact of addition of CdS QDs on catalytic activity of Pd nanoparticles (NPs). The Pd–CdS nanopowder functions as an efficient catalyst for Suzuki–Miyaura reactions for the formation of carbon–carbon bonds. There is a high electron density on Pd NPs and due to their high electron affinity they behave as an electron scavenger from CdS increasing the rate of oxidative addition, which is the rate‐determining step of the catalytic cycle, and, just as we expect, the C─C coupling reaction with the Pd–CdS nanopowder is faster and occurs in less time than that with Pd nanocatalysts. Compared to classical reactions, this method consistently has the advantages of short reaction times, high yields in a green solvent, reusability of the catalyst without considerable loss of catalytic activity and low cost, and is a facile method for the preparation of the catalyst.     

Facile synthesis of PtSnZn nanosheet thin film at oil–water interface by use of organometallic complexes: An efficient catalyst for methanol oxidation and p‐nitrophenol reduction reactions

PtSnZn nanosheet thin film with stable and high activity towards methanol electro‐oxidation was synthesized via a simple reduction of organometallic precursors including [PtCl₂(cod)] (cod = cis,cis‐1,5‐cyclooctadiene) and [Sn(CH₃)₄] complexes, in the presence of [Zn(acac)₂] (acac = acetylacetonate) complex at toluene–water interface. Catalytic activities of PtSnZn nanosheets were investigated in the p‐nitrophenol (p‐Nip) reduction and methanol oxidation reactions. The obtained results demonstrate that PtSnZn nanosheets exhibit a good electrocatalytic performance for methanol oxidation reaction, the catalytic activity of the PtSnZn nanosheets being at least 3.5 times higher than that of Pt nanoparticle thin film. Also, the apparent rate constant obtained for p‐Nip reduction with the PtSnZn nanosheets is at least 2.3 times higher than that for Pt nanoparticle thin film due to the appropriate interaction between platinum, tin and zinc metals and geometric properties of PtSnZn nanosheet thin film. Nanosheets are highly favourable for superior catalytic performances due to their geometric properties. A facile and efficient route was used to synthesize trimetallic alloy thin film at oil–water interface.     

Polymerization of graphene oxide nanosheet by using of aminoclay: Electrocatalytic activity of its platinum nanohybrids

This study describes the polymerization of graphene oxide (GO) nanosheet to reduced‐GO‐aminoclay (RGC) by covalent functionalization of chemically reactive epoxy groups on the basal planes of GO with amine groups of magnesium phyllosilicate clay (known as aminoclay). The resulting RGC sheets were characterized and applied to support platinum nanostructures at toluene/water interface. Pt nanoparticles (NPs) with diameters about several nanometers were adhered to RGC sheets by chemical reduction of [PtCl₂(cod)] (cod = cis,cis‐1,5‐cyclooctadiene) complex. Catalytic activity of Pt NPs thin films were investigated in the methanol oxidation reaction. Cyclic voltammetry results exhibit that the Pt/reduced‐GO (RGO) and Pt/RGC thin films showed improved catalytic activity in methanol oxidation reaction in comparison to other Pt NPs thin films, demonstrating that the prepared Pt/RGO and Pt/RGC thin films are promising catalysts for direct methanol fuel cell.     

Redox Non‐Innocence and Isomer‐Specific Oxidative Functionalization of Ruthenium‐Coordinated β‐Ketoiminate

This article deals with isomeric ruthenium complexes [Ru^III(L^R)₂(acac)] (S=1/2) involving unsymmetric β‐ketoiminates (AcNac) (L^R=R‐AcNac, R=H ( 1 ), Cl ( 2 ), OMe ( 3 ); acac=acetylacetonate) [R=para‐substituents (H, Cl, OMe) of N‐bearing aryl group]. The isomeric identities of the complexes, cct (cis‐cis‐trans, blue, a ), ctc (cis‐trans‐cis, green, b ) and ccc (cis‐cis‐cis_, pink, c ) with respect to oxygen (acac), oxygen (L) and nitrogen (L) donors, respectively, were authenticated by their single‐crystal X‐ray structures and spectroscopic/electrochemical features. One‐electron reversible oxidation and reduction processes of 1 – 3 led to the electronic formulations of [Ru^III(L)(L ^? )(acac)]⁺ and [Ru^II(L)₂(acac)]^? for 1 ⁺‐ 3 ⁺ (S=1) and 1^? – 3^? (S=0), respectively. The triplet state of 1 ⁺‐ 3 ⁺ was corroborated by its forbidden weak half‐field signal near g≈4.0 at 4 K, revealing the non‐innocent feature of L. Interestingly, among the three isomeric forms ( a – c in 1 – 3 ), the ctc ( b in 2 b or 3 b ) isomer selectively underwent oxidative functionalization at the central β‐carbon (C?H→C=O) of one of the L ligands in air, leading to the formation of diamagnetic [Ru^II(L)(L ′ )(acac)] (L ′ =diketoimine) in 4 / 4′ . Mechanistic aspects of the oxygenation process of AcNac in 2 b were also explored via kinetic and theoretical studies.     

Organo‐Palladium(II)‐Verbindungen mit PdC4‐Koordination: Phenylethinyl‐ und Methylphenylethinylkomplexe

Tetrakis(p‐tolyl)oxalamidinato‐bis[acetylacetonatopalladium(II)] ([Pd₂(acac)₂(oxam)]) reacted with Li–C≡C–C₆H₅ in THF with formation of [Pd(C≡C–C₆H₅)₄Li₂(thf)₄] ( 1a ). Reaction of [Pd₂(acac)₂(oxam)] with a mixture of 6 equiv. Li–C≡C–C₆H₅ and 2 equiv. LiCH₃ resulted in the formation of [Pd(CH₃)(C≡C–C₆H₅)₃Li₂(thf)₄] ( 2 ), and the dimeric complex [Pd₂(CH₃)₄(C≡C–C₆H₅)₄Li₄(thf)₆] ( 3 ) was isolated upon reaction of [Pd₂(acac)₂(oxam)] with a mixture of 4 equiv. Li–C≡C–C₆H₅ and 4 equiv. LiCH₃. 1 – 3 are extremely reactive compounds, which were isolated as white needles in good yields (60–90%). They were fully characterized by IR, ¹H‐, ¹³C‐, ⁷Li‐NMR spectroscopy, and by X‐ray crystallography of single crystals. In these compounds Li ions are bonded to the two carbon atoms of the alkinyl ligand. 1a reacted with Pd(PPh₃)₄ in the presence of oxygen to form the already known complexes trans‐[Pd(C≡C–C₆H₅)₂(PPh₃)₂] and [Pd(η²‐O₂)(PPh₃)₂]. In addition, 1a is an active catalyst for the Heck coupling reaction, but less active in the catalytic Sonogashira reaction.     

Polymerization of 3‐ethynylthiophene with homogeneous and heterogeneous Rh catalysts

3‐Ethynylthiophene (3ETh) was polymerized with Rh(I) complexes: [Rh(cod)acac], [Rh(nbd)acac], [Rh(cod)Cl]₂, and [Rh(nbd)Cl]₂ (cod is η²:η²‐cycloocta‐1,5‐diene and nbd η²:η²‐norborna‐2,5‐diene), used as homogeneous catalysts and with the last two complexes anchored on mesoporous polybenzimidazole (PBI) beads: [Rh(cod)Cl]₂/PBI and [Rh(nbd)Cl]₂/PBI used as heterogeneous catalysts. All tested catalyst systems give high‐cis poly(3ETh). In situ NMR study of homogeneous polymerizations induced with [Rh(cod)acac] and [Rh(nbd)acac] complexes has revealed: (i) a transformation of acac ligands into free acetylacetone (Hacac) occurring since the early stage of polymerization, which suggests that this reaction is part of the initiation, (ii) that the initiation is rather slow in both of these polymerization systems, and (iii) a release of cod ligand from [Rh(cod)acac] complex but no release of nbd ligand from [Rh(nbd)acac] complex during the polymerization. The stability of diene ligand binding to Rh‐atom in [Rh(diene)acac] catalysts remarkably affects only the molecular weight but not the yield of poly(3ETh). The heterogeneous catalyst systems also provide high‐cis poly(3ETh), which is of very low contamination with catalyst residues since a leaching of anchored Rh complexes is negligible. The course of heterogeneous polymerizations is somewhat affected by limitations arising from the diffusion of monomer inside catalyst beads. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2776–2787, 2008     

Syntheses and Structures of Acetyl‐Acetonato‐Alumo‐Diphenylsilanolates with Magnesium(II), Iron(II), Iron(III), Cobalt(II), and Nickel(II)

Bis(acetylacetonate)alumo‐oxo‐tetraphenyldisiloxane‐metal(II) dihydrates [(acac)₂Al(O–SiPh₂–O–SiPh₂–O)]₂M(H₂O)₂ (M = Mg, Fe, Co, Ni) were obtained from the corresponding acetyl‐acetonate‐dihydrates (acac)₂M(H₂O)₂ by reaction with the alumosiloxane [O–Ph₂Si–O–SiPh₂–O]₄Al₄(OH)₄. These new compounds display two acac ligands at the aluminum atoms as well as disilatrioxy chains linking the two aluminum atoms forming a (Al–O–Si–O–Si–O)₂ cycle (X‐ray structure analyses). Within this cycle the divalent metal ions M²⁺, to which two water molecules in trans positions are linked, are installed in almost planar MO₄ coordination spheres. Using water free (acac)₂Ni a different product forms: both reactants combine in a 2:1 ratio to yield [O–Ph₂Si–O–SiPh₂–O]₄Al₄(OH)₂O(OH₂)Ni₂(acac)₄. Here, three of the acac ligands were transposed to the aluminum atoms. The nickel atoms are in a distorted octahedral coordination mode from oxygen atoms of the ligands. When iron(III)tris(acetylacetonate) reacts with the alumosiloxane [O–Ph₂Si–O–SiPh₂–O]₃Al₂O(OH)Fe₂(acac)₃ was isolated, in which the two iron atoms still display one of the acac ligands. One of the aluminum atoms is in a tetrahedral oxygen environment, whereas the other is in the center of a trigonal bi‐pyramid formed of oxygen atoms either of the siloxane or of acac. The iron atoms have five‐ or sixfold coordination from oxygen atoms of siloxane, acac, hydroxide or oxide.     

Efficient and recyclable novel Ni‐based metal–organic framework nanostructure as catalyst for the cascade reaction of alcohol oxidation–Knoevenagel condensation

A novel Ni‐based metal–organic framework (Ni‐MOF) with a Schiff base ligand as an organic linker, Ni₃(bdda)₂(OAc)₂?6H₂O (H₂bdda = 4,4′‐[benzene‐1,4‐diylbis(methylylidenenitrilo)]dibenzoic acid), was synthesized and characterized using powder X‐ray powder diffraction, thermogravimetric analysis, Brunauer–Emmett–Teller measurements, inductively coupled plasma atomic emission spectroscopy, transmission electron microscopy, elemental analysis and Fourier transform infrared spectroscopy. The synthesized Ni‐MOF exhibited a high catalytic activity in benzyl alcohol oxidation using tert‐butyl hydroperoxide under solvent‐free conditions. Also, the efficiency of the catalyst was investigated in the cascade reaction of oxidation–Knoevanagel condensation under mild conditions. The Ni‐MOF catalyst could be recovered and reused four times without significant reduction in its catalytic activity.     

Two AgI–Carboxylate Polymers Involving Ag–Ag Interactions: Syntheses,Structures and Fluorescent Properties

Two novel silver complexes [Ag₂(Hsal)₂]_n ( 1 ) and [Ag₂(oda)]_n ( 2 ) (H₂sal = salicylic acid, H₂oda = oxydiacetatic acid) were synthesized hydrothermally by reaction of AgNO₃ with H₂sal or H₂oda and characterized by IR spectroscopy, elemental analysis, and single‐crystal X‐ray diffraction. Compound 1 shows a 2D metal‐organic architecture connected by μ₃‐η¹:η¹:η¹‐salicylato ligands and Ag–Ag interactions. Compound 2 displays a 3D metal‐organic network formed by μ₇‐(η²:η¹)‐(η²:η¹)‐η¹‐oxydiacetato ligands and Ag–Ag interactions. The photoluminescence properties of both complexes were also investigated.     

Synthesis and Structures of d10–d10 M2(μ‐dppm)2 Complexes with Sensitive Metal–Metal Distances in Response to the Binding of Sigma Donors

Diphosphine‐bridged dicopper(I) acetate complexes [Cu₂(μ‐dppm)₂(μ‐OAc)]X ( 2 X; X^? = , ) and [Cu₂(μ‐dppm)₂(μ‐OAc)(MeCN)]X ( 4 X) were prepared and the structures of 2 (PF₆ ) and 4 (PF₆ ) determined by X‐ray crystallography. The ground‐state geometries of [Cu₂(μ‐dppm)₂(μ‐OAc)]⁺ and [Cu₂(μ‐dppm)₂(μ‐OAc)(L)]⁺ (L = py, MeCN, THF, acetone, MeOH) were also obtained using density functional theory (DFT). The increased Cu – Cu distances found experimentally and theoretically by comparing the structures of cation [Cu₂(μ‐dppm)₂(μ‐OAc)]⁺ and its derivatives [Cu₂(μ‐dppm)₂(μ‐OAc)(L)]⁺ reflect the binding of various sigma donors (L). When using [Cu₂(μ‐dppm)₂(μ‐OAc)]⁺ as a structure sensor, the electron‐donating strength of a sigma donor can be quantitatively expressed as a DFT‐calculated Cu – Cu distance with the relative strength in the order py > MeCN > THF > acetone > MeOH, as determined.     

The development of phosphinoamine–Pd(II)–imidazole complexes: implications in room‐temperature Suzuki–Miyaura cross‐coupling reaction

The reaction of N‐methylimidazole (N‐MeIm) and N‐butylimidazole (N‐BuIm) with the complexes [PdCl₂(PPh₂py–P,N)] and [PdCl₂(PPh₂Etpy–P,N)] in the presence of NH₄PF₆ under N₂ at room temperature afforded four new cationic Pd(II) complexes [PdCl(PPh₂py–P,N)(N‐MeIm)](PF₆) ( 1 ), [PdCl(PPh₂py–P,N)(N‐BuIm)](PF₆) ( 2 ), [PdCl(PPh₂Etpy–P,N)(N‐MeIm)](PF₆) ( 4 ) and [PdCl(PPh₂Etpy‐P,N)(N‐BuIm)](PF₆) ( 5 ) in good yields, where PPh₂py is 2‐(diphenylphosphino)pyridine and PPh₂Etpy is 2‐{2‐(diphenylphosphino)ethyl}pyridine). The complexes were fully characterized. The catalytic activities of these complexes were investigated for Suzuki–Miyaura cross‐coupling reactions at room temperature. Complex 2 exhibited excellent activity compared to other analogs. Copyright © 2013 John Wiley & Sons, Ltd.     

Porphyrin–Alkaline Earth MOFs with the Highest Adsorption Capacity for Methylene Blue

A series of four porphyrin–alkaline earth metal– organic frameworks [Mg(HDCPP)₂(DMF)₂]_n?(H₂O)_{7 n} ( 1 ), [Ca(HDCPP)₂(H₂O)₂]_n(DMF)_{1.5 n} ( 2 ), [Sr(DCPP)(H₂O)(DMA)]_n ( 3 ), and [Ba(DCPP)(H₂O)(DMA)]_n ( 4 ) was isolated for the first time from solvothermal reaction between metal‐free 5,15‐di(4‐ carboxyphenyl)porphyrin (H₂DCPP) and alkaline earth ions. Single‐crystal X‐ray diffraction analysis reveals the 2D and 3D supramolecular network with periodic nanosized porosity for 1 / 2 and 3 / 4 , respectively. The whole series of MOFs, in particular, compounds 1 and 2 with intrinsic low molecular formula weight, exhibit superior adsorption performance for methylene blue (MB) with excellent capture capacity as represented by the thus far highest adsorption amount of 952 mg g^?1 for 2 and good selectivity, opening a new way for the potential application of the main group metal‐based MOFs.     

Cobalt titanate–cobalt oxide composite thin films deposited from heterobimetallic precursor

A single molecular heterobimetallic complex, [Co₂Ti(μ₃‐O)(TFA)₆(THF)₃] (1) [TFA = trifluoroacetate, THF = tetrahydrofuran], was synthesized, structurally and spectroscopically characterized and implemented as a single‐source precursor for the preparation of CoTiO₃–CoO composite thin films by aerosol‐assisted chemical vapour deposition (AACVD). The precursor complex was prepared by interaction of Co(OAc)₂.4H₂O [OAc = (CH₃COO^?)] with Ti(iso‐propoxide)₄ in the presence of trifluoroacetic acid in THF, and was analysed by melting point, CHN, FT‐IR, single‐crystal X‐ray diffraction and thermogravimetric analysis. The precursor complex thermally decomposed at 480 °C to give a residual mass corresponding to a CoTiO₃–CoO composite material. Good‐quality crystalline CoTiO₃–CoO composite thin films deposited at 500 °C by AACVD and characterized through powder X‐ray diffraction and scanning electron microscopy/energy‐dispersive X‐ray spectroscopy show that the crystallites have a rose‐flower‐like morphology with an average petal size in the range of 2–6 µm. Copyright © 2012 John Wiley & Sons, Ltd.     

Solid,Solution, and Theoretical Approach of [Cu(CN‐acac)(dmeen)]+

The reaction of bis(3‐cyano‐2,4‐pentanedionato)copper(II), [Cu(NC‐acac)₂] with the nitrogenous base N,N‐dimethyl, N′‐ethyl‐1,2‐ethylenediamine (dmeen) in the presence of Cu(ClO₄)₂ · 6H₂O, afforded a new cationic mixed‐ligand chelate [Cu(CN‐acac)(dmeen)]⁺. Its structure was characterized spectroscopically (IR, UV/Vis, EPR) and verified by X‐ray diffraction studies as [Cu(CN‐acac)(dmeen)(H₂O)]ClO₄. The coordination of CN‐acac^– as bridging ligand leads to a polymeric helical chain, which extends in the crystallographic c axis. Density functional theory (DFT) calculations suggest that in the solid state the anion CN‐acac^– binding is envisaged through the nitrogen atom of the cyanido group, establishing an octahedral arrangement around copper, whereas in solution, the square‐planar arrangement is prevailed, in accordance with the EPR findings.     

Iridium Complexes of 2,2′‐Bidipyrrins

The reaction of [{Ir(cod)(μ‐Cl)}₂] and K₂CO₃ or of [{Ir(cod)(μ‐OMe)}₂] alone with the non‐natural tetrapyrrole 2,2′‐bidipyrrin (H₂BDP) yields, depending on the stoichiometry, the mononuclear complex [Ir(cod)(HBDP)] or the homodinuclear complex [{Ir(cod)}₂(BDP)]. Both complexes react readily with carbon monoxide to yield the species [Ir(CO)₂(HBDP)] and [{Ir(CO)₂}₂(BDP)], respectively. The results from NMR spectroscopy and X‐ray diffraction reveal different conformations for the tetrapyrrolic ligand in both complexes. The reaction of [{Ir(coe)₂(μ‐Cl)}₂] with H₂BDP proceeds differently and yields the macrocyclic [4e^?,2H⁺]‐oxidized product [IrCl₂(9‐Meic)] (9‐Meic = monoanion of 9‐methyl‐9,10‐isocorrole), which can be addressed as an iridium analog of cobalamin.     

Alcohol oxidation reactions catalyzed by ruthenium–carbonyl complexes of thioarylazoimidazoles

Alcohols are oxidized by N‐methylmorpholine‐N‐oxide (NMO), Bu^tOOH and H₂O₂ to the corresponding aldehydes or ketones in the presence of catalyst, [RuH(CO)(PPh₃)₂(SRaaiNR′)]PF₆ ( 2 ) and [RuCl(CO)(PPh₃)(S_κRaaiNR′)]PF₆ ( 3 ) (SRaaiNR′ ( 1 ) = 1‐alkyl‐2‐{(o‐thioalkyl)phenylazo}imidazole, a bidentate N(imidazolyl) (N), N(azo) (N′) chelator and S_κRaaiNR′ is a tridentate N(imidazolyl) (N), N(azo) (N′), S_κ‐R is tridentate chelator; R and R′ are Me and Et). The single‐crystal X‐ray structures of [RuH(CO)(PPh₃)₂(SMeaaiNMe)]PF₆ ( 2a ) (SMeaaiNMe = 1‐methyl‐2‐{(o‐thioethyl)phenylazo}imidazole) and [RuH(CO)(PPh₃)₂(SEtaaiNEt)]PF₆ ( 2b ) (SEtaaiNEt = 1‐ethyl‐2‐{(o‐thioethyl)phenylazo}imidazole) show bidentate N,N′ chelation, while in [RuCl(CO)(PPh₃)(S_κEtaaiNEt)]PF₆ ( 3b ) the ligand S_κEtaaiNEt serves as tridentate N,N′,S chelator. The cyclic voltammogram shows Ru^III/Ru^II (~1.1 V) and Ru^IV/Ru^III (~1.7 V) couples of the complexes 2 while Ru^III/Ru^II (1.26 V) couple is observed only in 3 along with azo reductions in the potential window +2.0 to ?2.0 V. DFT computation has been used to explain the spectra and redox properties of the complexes. In the oxidation reaction NMO acts as best oxidant and [RuCl(CO)(PPh₃)(S_κRaaiNR′)](PF₆) ( 3 ) is the best catalyst. The formation of high‐valent Ru^IV=O species as a catalytic intermediate is proposed for the oxidation process. Copyright © 2014 John Wiley & Sons, Ltd.     

Oriented Circular Dichroism Analysis of Chiral Surface‐Anchored Metal–Organic Frameworks Grown by Liquid‐Phase Epitaxy and upon Loading with Chiral Guest Compounds

Oriented circular dichroism (OCD) is explored and successfully applied to investigate chiral surface‐anchored metal–organic frameworks (SURMOFs) based on camphoric acid (D‐ and Lcam) with the composition [Cu₂(Dcam)_2x(Lcam)_2?2x(dabco)]_n (dabco=1,4‐diazabicyclo‐[2.2.2]‐octane). The three‐dimensional chiral SURMOFs with high‐quality orientation were grown on quartz glass plates by using a layer‐by‐layer liquid‐phase epitaxy method. The growth orientation, as determined by X‐ray diffraction (XRD), could be switched between the [001] and [110] direction by using either OH‐ or COOH‐terminated substrates. These SURMOFs were characterized by using OCD, which confirmed the ratio as well as the orientation of the enantiomeric linker molecules. Theoretical computations demonstrate that the OCD band intensities of the enantiopure [Cu₂(Dcam)₂(dabco)]_n grown in different orientations are a direct result of the anisotropic nature of the chiral SURMOFs. Finally, the enantiopure [Cu₂(Dcam)₂(dabco)]_n and [Cu₂(Lcam)₂(dabco)]_n SURMOFs were loaded with the two chiral forms of ethyl lactate [(+)‐ethyl‐D ‐lactate and (?)‐ethyl‐L ‐lactate)]. An enantioselective enrichment of >60 % was observed by OCD when the chiral host scaffold was loaded from the racemic mixture.     

A Systematic Study of Fluorescence‐Based Detection of Nitroexplosives and Other Aromatics in the Vapor Phase by Microporous Metal–Organic Frameworks

A systematic study is conducted on four microporous metal–organic framework compounds built on similar ligands but different structures, namely [Zn₃(bpdc)₃(bpy)] ? 4 DMF ? H₂O ( 1 ), [Zn₃(bpdc)₃(2,2′dmbpy)] ? 4 DMF ? H₂O ( 2 ), [Zn₂(bpdc)₂(bpe)] ? 2 DMF ( 3 ), and [Zn(bpdc)(bpe)] ? DMF ( 4 ) (bpdc=4,4′‐biphenyldicarboxylate; bpy=4,4′‐bipyridine; 2,2′dmbpy=2,2′‐dimethyl‐4,4′bipyridine; bpe=1,2‐bis(4‐pyridyl)ethane; DMF=N,N′‐dimethylformamide) to investigate their photoluminescence properties and sensing/detection behavior upon exposure to vapors of various aromatic molecules (analytes) including nitroaromatic explosives. The results show that all four compounds are capable of detecting these molecules in the vapor phase through fluorescence quenching or enhancement. Both electrochemical measurements and theoretical calculations are performed to analyze the analyte–MOF interactions, to explain the difference in signal response by different analytes, and to understand the mechanism of fluorescence quenching or enhancement observed in these systems. Interestingly, compound 3 also shows an emission frequency shift when exposed to benzene (BZ), chlorobenzene (ClBZ), and toluene (TO), which provides an additional variable for the identification of different analytes in the same category.