Asymptotic Modeling of Nonlinear Wave Processes in Shock‐Loaded Elastoplastic Materials

Nonlinear wave processes in shockloaded elastoplastic materials are modeled. A comparison of the results obtained with experimental data and numerical solutions of exact systems of dynamic equations shows that the model equations proposed qualitatively describe the stressdistribution evolution in both the elasticflow and plasticflow regions and can be used to solve one and twodimensional problems of pulsed deformation and fracture of elastoplastic media.     

Numerical analysis of axisymmetric buckling of conical shells

Nonlinear boundaryvalue problems of axisymmetric buckling of conical shells under a uniformly distributed normal pressure are solved by the shooting method. The problems are formulated for a system of six firstorder ordinary differential equations with independent rotation and displacement fields. Simply supported and clamped cases are considered. Branching solutions of the boundaryvalue problems are studied for different pressures and geometrical parameters of the shells. The nonmonotonic and discontinuous curves of equilibrium states obtained show that collapse, i.e., snapthrough instability is possible. For a simply supported shell, multivalued solutions are obtained for both external and internal pressure. For a clamped thinwalled shell, theoretical results are compared with experimental data.     

Hyperbolicity of Steady‐State Equations of Gas Shear Flows in a Thin Layer

The steadystate threedimensional motion of an ideal gas in a thin layer of variable height is considered. In the longwave approximation, the equations of gas dynamics reduce to a system of integrodifferential equations. The generalized characteristics and hyperbolicity conditions of the obtained system are found.     

On the Quasi‐Steadiness Hypothesis as Applied to Gas Exhaustion from a Receiver

A semiempirical method of determining the stabilization time for a quasisteady mode of gas exhaustion from a receiver after sudden opening of the nozzle and the time evolution of the real flow rate at the stage of the transitional process are considered. The numerical solution of the equations of exhaustion gas dynamics in a twodimensional formulation and the results of model experiments demonstrated that the method can be used to estimate the conditions of applicability of the quasisteadiness hypothesis and to determine the discharge coefficient of the nozzle with controlled accuracy.     

Stochastic Analysis of Macrodispersion in a Semi‐Confined Aquifer

In this paper, the macroscopic dispersion resulting from one and twodimensional flows through a semiconfined aquifer with spatially variable hydraulic conductivity K which is represented by a stationary (statistically homogeneous) random process is analyzed using the spectral representation technique. Stochastic fluctuation equations of the steady flow and solute transport are solved to construct the macroscopic dispersive flux and evaluate the resulting macrodispersivity tensor in terms of the leakage factor and input covariances describing the hydraulic conductivity in a semiconfined aquifer bounded by a leaky layer above and an impervious stratum below. The macrodispersivity tensor is studied using some convenient forms of the log hydraulic conductivity process. The sensitivity of the resulting macrodispersivity to the input covariances is discussed along with the influence of the leakage factor for both one and twodimensional flows. It is found that the longitudinal macrodispersivities are increased due to the presence of leakage, while the transverse macrodispersivities are reduced due to leakage.     

Effect of Streamwise Streaky Structures on Turbulization of a Circular Jet

Experimental investigations of the influence of streamwise streaky structures on turbulization of a circular laminar jet are described. The qualitative characteristics of jet evolution are studied by smoke visualization of the flow pattern in the jet and by filming the transverse and longitudinal sections of the jet illuminated by the laser sheet with image stroboscopy. It is shown that the streaky structures can be generated directly at the nozzle exit, and their interaction with the Kelvin–Helmholtz ring vortices leads to emergence of azimuthal beams ( structures) by a mechanism similar to threedimensional distortion of the twodimensional Tollmien–Schlichting wave at the nonlinear stage of the classical transition in nearwall flows. The effect of the jetexhaustion velocity and acoustic action on jet turbulization is considered.     

Origination of In‐Phase Oscillations of Thin Plates with Aeroelastic Interaction

Synchronization of oscillations of thin elastic plates that are walls of a gasfilled channel is considered. The gas motion is described by a system of Navier–Stokes equations, which is solved using the secondorder MacCormack method with time splitting. The motion of the channel walls is described by a system of geometrically nonlinear dynamic equations of the theory of this plates, which is solved by the finitedifference method. Kinematic and dynamic contact conditions are imposed at the interface between the media. A numerical experiment is performed to determine typical dynamic regimes and study the transition of the aeroelastic system to inphase oscillations.     

Exact solutions and mathematical properties of boundary‐value problems for dynamic‐diffusion boundary layers

The paper studies boundaryvalue problems for dynamicdiffusion boundary layers occurring near a vertical wall at high Schmidt numbers and for dynamic boundary layers whose inner edge is adjacent to the dynamicdiffusion layers. Exact solutions for boundary layers at small and large times are derived. The wellposedness of the boundaryvalue problem for a steady dynamicdiffusion layer is studied.     

Description of a Flow of a Gas‐Condensate Mixture in an Axisymmetric Capillary Tube by the Density‐Functional Method

An isothermal flow of a twophase multicomponent mixture through a smalldiameter capillary tube is examined by the densityfunctional method. For low ratios of the characteristic radius of the capillary to its length, a general form of the dominating term in the asymptotic solution is found. An improved version of the law of mixture transfer is obtained. The form of possible corrections to the Darcy law for the filtration rates of the phases is discussed.     

Heat Transfer on the Surface on a Spherically Blunted Cone Exposed to a Supersonic Spatial Flow with Injection of a Coolant Gas

The heattransfer processes in a supersonic spatial flow around a spherically blunted cone with allowance for heat overflow along the longitudinal and circumferential coordinates and injection of a coolant gas are studied numerically. The prospects of using highly heatconducting materials and injection of a coolant gas for reduction of the maximum temperatures at the body surface are demonstrated. The solutions of the direct and inverse problems in one, two, and threedimensional formulations for different shell materials are compared. The error of the thinwall method in determining the heat flux on the heatloaded boundary of the body is estimated.     

Hydrodynamic calculations of layered seams on the basis of modified relative permeabilities

The possibility of reducing the dimensionality of the problem of twophase filtration in layered seams by introducing modified phase permeabilities instead of initial relative permeabilities, which are coefficients of the initial system of equations within the framework of the Barkley–Leverett model, is studied. Modified permeabilities are proposed for the case where the relative permeabilities of each phase are represented by analytical dependences for individual interlayers. Onedimensional numerical calculations with these permeabilities are in good agreement with the solution of the twodimensional problem.     

Mixed Formulations of Bending Problems for Homogeneous Elastic Plates and Beams

Mixed formulations of bending problems for homogeneous plates (beams) are proposed, whose essence is that the deformation of a plate (beam) near its fixed boundary is described by the threedimensional elasticity equations, and the remaining part by the conventional equations of plate (beam) bending. At the interface between these regions, the solutions of these equations are joined. The mixed formulation allows one to describe the threedimensional stress state in the neighborhood of the fixed boundaries of plates (beams) and take into account the complex nature of the fixing conditions. Finiteelement implementation is more efficient for the mixed formulations of plate (beam) bending problems than for the wellknown threedimensional formulations.     

Using a hot‐wire anemometer for measurement of characteristics of a random acoustic field in compressible flows

The problem of interpretation of hotwire measurements of acoustic fields in compressible flows is considered. Relations between massflow and totaltemperature fluctuations registered by a hotwire anemometer and pressure and velocity fluctuations are found. The relations obtained are applicable in the general case for measurement of resultant acoustic fluctuations at some point of the flow, which are generated by arbitrary distributed sources of sound with priorunknown properties.     

Experimental study of stability of strongly underexpanded laminar free and impact jets

The growth rates of density fluctuations in the mixing layer of strongly underexpanded lowdensity jets are measured by the electronbeam technique within the range of Reynolds numbers Re_L = 50 – 230. Regimes of selfinduced oscillations are determined for these flow conditions in the case of a jet incident normally onto a finitesize target. Results on the frequency of pressure oscillations on the target are obtained and compared with the spectra of the growth rates of density fluctuations in the mixing layer of free jets. It is shown that selfinduced oscillations cannot be sustained because of the development of instability in the mixing layer of the jet.     

Stability and Self‐Oscillations of a Rotor Containing a Conducting Liquid in a Magnetic Field

This paper considers the problem of the stability in the small of the steadystate spinning of a rotor with a cylindrical cavity partly filled with a viscous, incompressible, conducting liquid in a magnetic field. The responses of the buttend boundary layers and the resultant force exerted by the liquid on the rotor performing circular precession of small radius are determined. The plane of the viscoelastic restraint parameters of the rotor axis was Dpartitioned into regions with different degrees of instability is constructed. Steadystate spinning near the boundary of the region of stability in the space of parameters is studied assuming nonlinear responses of the supports. It is shown that passage through the boundary of the region of stability leads to bifurcation of the steadystate spinning regime, resulting in periodic motion of the type of circular precession. The origin ofperiodic motion from steadystate spinning can be subcritical or supercritical.     

Stress–strain state of a composite anisotropic plate with curvilinear cracks and thin rigid inclusions

A complexpotential solution of a mixed problem of the linear theory of elasticity is given for an infinite plate composed of two anisotropic halfplanes. The plate contains cuts and thin undeformable inclusions shaped like arbitrary open smooth curves that do not intersect each other and the interface between the halfplanes.     

Effect of Dynamic Prehistory on Aerodynamics of a Laminar Separated Flow in a Channel Behind a Rectangular Backward‐Facing Step

The effect of dynamic prehistory of the flow and the channelexpansion ratio on aerodynamics of a steady separated laminar flow behind a rectangular backwardfacing step located in a planeparallel channel is numerically studied. It is shown that the boundary layer upstream of the flow separation exerts a strong effect on flow characteristics behind the step. A decrease in the boundarylayer thickness in the cross section of the step leads to a decrease in the separationregion length, and an increase in the channelexpansion ratio with a fixed initial boundarylayer thickness and Reynolds number leads to an increase in the separationregion length.     

A Numerical Study of the Critical Gas Saturation in a Porous Medium

We use porenetwork simulations to study the dependence of the critical gas saturation in solutiongas drive processes on the geometric parameters of the porous medium. We show that for a variety of growth regimes (including global and local percolation, instantaneous and sequential nucleation, and masstransfer driven processes), the critical gas saturation, Sgc, follows a powerlaw scaling with the final nucleation fraction (fraction of sites activated), fq. For 3D processes, this relation reads Sgcfq0.16, indicating a sensitive dependence of Sgc to fq at very small values of fq.     

Spatial Simple Waves on a Shear Flow

The paper studies simple waves of the shallowwater equations describing threedimensional wave motions of a rotational liquid in a freeboundary layer. Simple wave equations are derived for the general case. The existence of unsteady or steady simple waves adjacent continuously to a given steady shear flow along a characteristic surface is proved. Exact solutions of the equations describing steady simple waves were found. These solutions can be treated as extension of Prandtl–Mayer waves for sheared flows. For shearless flows, a general solution of the system of equations describing unsteady spatial simple waves was found.