Adsorption and adsolubilization of surfactants on titanium dioxides with functional groups

Adsorption of ionic surfactants on titanium dioxide with dodecyl chain groups or quaternary ammonium groups (XNm, where m is the carbon number of the alkyl chain, 4–16) was investigated. The adsorbed amount of cationic surfactants (dodecyltrimethylammonium bromide, DTAB; 1,2-bis(dodecyldimethylammonio)ethane dibromide, 2RenQ) on titanium dioxide with dodecyl chain groups increased with increasing concentration of the dodecyl chain due to hydrophobic interaction, where the adsorbed amounts of DTAB at saturation was considerably greater than those of 2RenQ. Adsorption of an anionic surfactant (sodium dodecyl sulfate, SDS) on XNm occurred mainly due to both electrostatic attraction force and hydrophobic interaction, depending on the alkyl chain length on XNm. On the other hand, adsorption of cationic surfactants, DTAC and 2RenQCl (their counter ions are chloride ions), on XNm was quite smaller compared with that of SDS due to electrostatic repulsion force. Adsolubilization of 2-naphthol in the surfactant-adsorbed layer on the titanium dioxides with the functional groups was also studied. The adsolubilized amounts of 2-naphthol on titanium dioxide with dodecyl chain groups were enhanced by adsorption of DTAB, but no distinct increase in the adsolubilization was observed by adsorption of 2RenQ. In the case of XNm, the amount of 2-naphthol adsorbed in the absence of surfactants increased with increasing alkyl chain length on XNm. Further, an appreciable increase in the adsolubilization of 2-naphthol on XNm with adsorption of 2RenQCl was observed. It was found from the admicellar partitioning coefficients that the adsolubilization of 2-naphthol preferably occurs on XNm by adsorption of SDS or 2RenQCl compared with that by DTAC. These differences in the adsolubilization were discussed by microproperties of the surfactant-adsorbed layers estimated using a spin probe.     

Interaction between the water soluble poly{1,4-phenylene-[9,9-bis(4-phenoxy butylsulfonate)]fluorene-2,7-diyl} copolymer and ionic surfactants followed by spectroscopic and conductivity measurements

The interaction has been studied in aqueous solutions between a negatively charged conjugated polyelectrolyte poly{1,4-phenylene-[9,9-bis(4-phenoxybutylsulfonate)]fluorene-2,7-diyl} copolymer (PBS-PFP) and several cationic tetraalkylammonium surfactants with different structures (alkyl chain length, counterion, or double alkyl chain), with tetramethylammonium cations and with the anionic surfactant sodium dodecyl sulfate (SDS) by electronic absorption and emission spectroscopy and by conductivity measurements. The results are compared with those previously obtained on the interaction of the same polymer with the nonionic surfactant C12E5. The nature of the electrostatic or hydrophobic polymer-surfactant interactions leads to very different behavior. The polymer induces the aggregation with the cationic surfactants at concentrations well below the critical micelle concentration, while this is inhibited with the anionic SDS, as demonstrated from conductivity measurements. The interaction with cationic surfactants only shows a small dependence on alkyl chain length or counterion and is suggested to be dominated by electrostatic interactions. In contrast to previous studies with the nonionic C12E5, both the cationic and the anionic surfactants quench the PBS-PFP emission intensity, leading also to a decrease in the polymer emission lifetime. However, the interaction with these cationic surfactants leads to the appearance of a new emission band (approximately 525 nm), which may be due to energy hopping to defect sites due to the increase of PBS-PFP interchain interaction favored by charge neutralization of the anionic polymer by cationic surfactant and by hydrophobic interactions involving the surfactant alkyl chains, since the same green band is not observed by adding either tetramethylammonium hydroxide or chloride. This effect suggests that the cationic surfactants are changing the nature of PBS-PFP aggregates. The nature of the polymer and surfactant interactions can, thus, be used to control the spectroscopic and conductivity properties of the polymer, which may have implications in its applications.     

Electrostatic control of spin exchange between mobile spin-correlated radical pairs created in micellar solutions

A series of photoinduced H-atom abstraction reactions between anthraquinone-2,6,-disulfonate, disodium salt (AQDS) and differently charged micellar substrates is presented. After a 248 nm excimer laser flash, the first excited triplet state of AQDS is rapidly formed and then quenched by abstraction of a hydrogen atom from the alkyl chain of the micelle surfactant, leading to a spin-correlated radical pair (SCRP). The SCRP is detected 500 ns after the laser flash using time-resolved (direct detection) electron paramagnetic resonance (TREPR) spectroscopy at X-band (9.5 GHz). By changing the charge on the surfactant headgroup from negative (sodium dodecyl sulfate, SDS) to positive (dodecyltrimethylammonium chloride, DTAC), TREPR spectra with different degrees of antiphase structure (APS) in their line shape were observed. The first derivative-like APS line shape is the signature of an SCRP experiencing an electron spin exchange interaction between the radical centers, which was clearly observable in DTAC micelles and absent in SDS micellar solutions. Solutions with surfactant concentrations well below the critical micelle concentration (cmc) or solutions where micellar formation had been disrupted (1:1 v/v CH(3)CN/H(2)O) also showed no APS line shapes in their TREPR spectra. These results support the conclusion that electrostatic forces between the sensitizer (AQDS) charge and the substrate (surfactant) headgroup charge are responsible for the observed effects. The results represent a new example of electrostatic control of a spin exchange interaction in mobile radical pairs.     

Spin probes in micellar and polymer self-associating systems

The results of studies of micellar and self-associating polymer systems by spin probe ESR spectroscopy are summarized. The local dynamics and structures of low-molecular-weight micelles built of cationic surfactants bearing long alkyl chains (from C₁₆ to C₂₂), gels of hydrophobically modified polymers, polymer micelles, micellar complexes of nonionic surfactant (Brij58) with hydrogels based on polyacrylic acid, and associates formed in aqueous solutions of poly(diphenylenesulfophthalide) are discussed. Interest in these systems is caused by prospects of their practical use as carriers in drug delivery, in biotechnology, for the enhancement of oil production, and in other purposes.     

Nanoaggregates of ABC-type triple hydrophilic block copolymers by binding of cationic surfactant

A triple hydrophilic block copolymer comprised of poly(ethylene oxide), poly(sodium 2-acrylamido-2-methylpropanesulfonate), and poly(methacrylic acid) (PEO–PAMPS–PMAA) does not form a micelle by itself when it is dissolved in water. However, in the previous paper, we fabricated the nanoaggregates of PEO–PAMPS–PMAA and cationic surfactant, such as cetyltrimethylammonium chloride (CTAC), by insolubilizing the anionic PAMPS and/or PMAA blocks of the polymer with CTAC only at high pH. In this paper, we fabricated the nanoaggregates of dodecyltrimethylammonium chloride (DTAC) and PEO–PAMPS–PMAA in a wide range of pH to examine the effect of ionization of the PMAA blocks of the polymer on the aggregates formation of PEO–PAMPS–PMAA. The properties of the nanoaggregates are affected by the ionization of PMAA block of the polymer. DTAC (C12 alkyl chain) was employed instead of CTAC (C16 alkyl chain) to reveal the effect of alkyl chain length of surfactant on the aggregate formation of PEO–PAMPS–PMAA. The properties of PEO–PAMPS–PMAA nanoaggregates also depend on the structure of surfactant. The binding of DTAC to PEO–PAMPS–PMAA was monitored by electrophoresis measurements, while the formation of DTAC/PEO–PAMPS–PMAA nanoaggregates was confirmed by scanning electron microscopy, dynamic light scattering measurements and fluorescence spectroscopy.     

Unusual micelle and surface adsorption behavior in mixtures of surfactants with an ethylene oxide-propylene oxide triblock copolymer

Micellization and adsorption at the air-solution interface of binary mixtures of the triblock copolymer of ethylene oxide and propylene oxide, EO23PO52EO23 (EPE), and the surfactants sodium dodecyl sulfate (SDS), dodecyl trimethylammonium chloride (DTAC), and tetraethylene glycol monooctyl ether (C8EO4) have been studied by neutron reflectivity and surface tension. The synergistic attractive interaction between the polymer and the ionic surfactants has been analyzed in the framework of the pseudo phase approximation and gives rise to a stronger interaction for EPE/SDS than EPE/DTAC. In contrast, the interaction of the nonionic surfactant C8EO4 with the copolymer EPE shows an unexpected and rather different behavior, resulting in a strongly repulsive interaction, characterized by a positive interaction parameter. The neutron reflectivity measurements of the surface excess, where the predicted and measured surface excesses are directly compared, provide evidence that challenges the applicability of the pseudo phase approximation for describing the surface mixing behavior. Structural information on the mixed adsorbed layer provides evidence which in part explains the observed discrepancies between the measured surface excesses and the behavior predicted from the pseudo phase approximation. Furthermore the structural evidence can be use to rationalize the differences in behavior observed between the ionic and nonionic surfactants.     

Membrane solubilization by detergent: resistance conferred by thickness

The commonly held model for membrane dissolution by detergents/surfactants requires lipid transport from the inner to the outer bilayer leaflet ('flip-flop'). Although applicable to many systems, it fails in cases where cross-bilayer transport of membrane components is suppressed. In this paper we investigate the mechanism for surfactant-induced solubilization of polymeric bilayers. To that end, we examine the dissolution of a series of increasingly thick, polymer-based vesicles (polymersomes) by a nonionic surfactant, Triton X-100, using dynamic light scattering. We find that increasing the bilayer thickness imparts better resistance to dissolution, so that the concentration required for solubilization, after a fixed amount of time, increases nearly linearly with membrane thickness. Combining our experimental data with a theoretical model, we show that the dominant mechanism for the surfactant-induced dissolution of polymeric vesicles, where polymer flip-flop across the membrane is suppressed, is the surfactant transport through the bilayer. This mechanism is different both qualitatively and quantitatively from the mechanisms by which surfactants dissolve pure lipid vesicles.     

Effects of anionic surfactants on ligand-promoted dissolution of iron and aluminum hydroxides

We investigated the influence of the surfactants sodium dodecyl sulfate (SDS) and rhamnolipid (RhL) on ligand-promoted dissolution of goethite (alpha-FeOOH) and boehmite (gamma-AlOOH) at pH 6. The siderophore desferrioxamine B (DFOB), its derivate desferrioxamine D (DFOD), ethylenediaminetetraacetic acid (EDTA), and 8-hydroxyquinoline-5-sulfonic acid (HQS) were used as ligands. The rates of ligand-promoted dissolution of goethite were significantly increased in the presence of low concentrations of anionic surfactants (<80 microM SDS; <6 mg/L RhL). At higher surfactant concentrations, however, the effects of surfactants were negligible. The dissolution rates in the presence of surfactants were not correlated with adsorbed amounts of ligands. Three possible factors contributing to these observations were further investigated and discussed: (i) adsorbed surfactants may influence ligand adsorption by changes in the ligand's surface speciation, (ii) re-adsorption of Fe-DFOB or Fe-DFOD complexes may lead to an underestimation of siderophore-promoted dissolution rates at high surfactant concentrations, and (iii) co-adsorption of protons to goethite with SDS may influence the dissolution rates. However, our results show that none of these three factors can satisfactorily explain the observed effects of anionic surfactants on ligand-promoted dissolution rates of iron and aluminum hydroxides.     

Cationic Surfactants as Regulators in Paper Separation of 2‐Nitrophenol and 2,4,6‐Trinitrophenol in Water

The chemical pollutants 2‐nitrophenol (2‐NP) and 2,4,6‐trinitrophenol (2,4,6‐TNP) were studied for their separation from water by the paper capillary permeation adsorption technique by the use of the four cationic surfactants dodecyltrimethylammonium chloride (DTAC), tetradecyltrimethylammonium bromide (TTAB), cetyltrimethylammonium bromide (CTAB), cetylpyridinium chloride (CPC) as regulators. The effect of pH and the concentration of surfactant on the separatability have been investigated. A nearly 100% separatability was obtained for each pollutant at its optimum pH and surfactant concentration. It was shown that the separation was accomplished via surface adsorption onto the fibers of paper. The change in separatability at basic pH 11 with surfactant variety was analyzed. The result shows that the surfactant with a longer chain alkyl group is more effective for the separation of 2‐NP and the surfactants with 16 carbons in the long chain alkyl group are most effective. The surfactants with 12 carbons or more in the long alkyl group but containing no aromatic group such as pyridyl group are equally effective for accomplishing an efficient separation of 2,4,6‐TNP. Selective separation of 2‐NP from an admixture of 2‐NP plus 2,4,6‐TNP was attempted. The optimum surfactant for each pollutant was tested with seawater for removing the pollutant. The goal of this study is to search for an optimum cationic surfactant and optimum separation conditions for nitrophenols.     

A pulsed EPR study of surfactant layer structure in composites of a synthetic layered silicate with polystyrene and polycaprolactone

Double electron electron resonance (DEER), deuterium electron spin-echo envelope modulation (ESEEM) spectroscopy and 31P electron nuclear double resonance (ENDOR) spectroscopy were applied to site-specifically spin-labeled surfactants in the organically modified layered silicate magadiite and its composites with polystyrene (PS) and polycaprolactone (PCL). The organomagadiite consist of stacks of silicate platelets with surfactant layers between these platelets. In PS composites the stacks are dispersed in the polymer matrix as a whole, while melt processing with PCL leads to intercalation of polymer chains into the galleries between the platelets. The DEER data prove that even in the case of the non-intercalated PS composites the density of surfactant molecules changes drastically during composite formation on length scales of a few nanometers. Deuterium ESEEM data demonstrate that spin labels attached both in the middle and at the end of the alkyl chain have contact with the headgroups of neighboring surfactant molecules. By analysis of the 31P ENDOR spectra, two characteristic distances are found between the spin labels and the headgroups of phosphonium surfactants. The shorter, proximal distance can be assigned to headgroups in the same surfactant layer. By comparison with the basal spacing between consecutive silicate platelets the longer, distal distance is assigned to a layer of surfactants that is not attached to the surface of the next platelet but rather located between platelets. Altogether the data support a picture of trilayers of disordered surfactant molecules with their alkyl chains oriented nearly parallel to the surface.     

Sorption of a fluorescent whitening agent (Tinopal CBS) onto modified cellulose fibers in the presence of surfactants and salt

The combined effect of salt (10 mmol L(-1)) and surfactants on the sorption of the fluorescent brightener 4,4'-distyrylbiphenyl sodium sulfonate (Tinopal CBS) onto modified cellulose fibers was studied. Sorption efficiencies with both cationic and anionic surfactants were evaluated. Emission spectroscopy was used for quantitative analysis since Tinopal has an intense fluorescence. The sorption efficiency of the brightener is greater for solutions containing a cationic surfactant (DTAC) below the critical micelle concentration (cmc), while for an anionic surfactant (SDS) above its cmc the efficiency is greater. The profile of the sorption isotherms were interpreted in terms of the evolution of surfactant aggregation at the fiber/solution interface. Salt influences the efficiency of the Tinopal sorption on the modified cellulose fibers either because it decreases the cmc of the surfactants or because the ions screen the surface charges of the fiber which decreases the electrostatic interaction among the charged headgroup of the surfactant and the charged fiber surface.     

Complexes of a cationic polymer with oxidized anionic liposomes: Composition,structure, and properties

Formation of complexes obtained by the adsorption of a cationic polymer, poly(N-ethyl-4-vinylpyridium bromide), with a degree of polymerization of 600 on the surface of 50-nm bilayer vesicles (liposomes) formed from neutral phosphatidyl choline, anionic diphosphatidyl glycerol (cardiolipin), and a surfactant with one alkyl radical, such as electroneutral n-hexadecylphosphocholine, palmitic acid, or heptanoic acid, is studied. The incorporation of these surfactants into the liposomal membrane stimulates the appearance of oxidized forms of lipids in it. The incorporation of n-hexadecylphosphocholine into the membrane of n-hexadecylphosphocholine and palmitic acid with the alkyl radical, whose length is comparable with the length of alkyl radicals in a lipid molecule, has no effect on the permeability of the membrane. However, these liposomes lose integrity upon the adsorption of polycation; as a result, complexation becomes irreversible. Electroneutral and anionic surfactants with long hydrocarbon chains may accumulate in a cellular membrane owing to the oxidative degradation of unsaturated radicals in lipid molecules. This finding may be used in the design of polymeric therapeutic means specifically interacting with damaged cells.     

A site-directed spin-labeling study of surfactants in polymer–clay nanocomposites

Polymer–clay nanocomposites exhibit much improved mechanical, physical, and chemical properties compared to the pure polymer. The interaction of polymer and organically modified silicates is mainly influenced by the surfactant layer in the system. To investigate the structure and dynamics of this surfactant layer, various electron paramagnetic spectroscopy (EPR) techniques were applied. Continuous wave EPR experiments showed a temperature-dependent heterogeneous mobility of the surfactant layer in organoclay as well as a difference in dynamics along the alkyl chain. Intercalation of polystyrene causes a significant slowdown in surfactant dynamics. Electron spin echo envelope modulation indicates a closer contact of the polymer with the mid of the surfactant tail than with the end of the tail. From the obtained data the picture of flatly lying surfactants on clay platelets with a mobility gradient along their alkyl chains can be drawn.     

Effect of D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) on surfactant monolayers

In the present study, the effects of an amphiphilic polymer, d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) on model surfactant monolayers dipalmitoylphosphatidylcholine (DPPC), a binary mixture of DPPC with palmitoyloleoyl phosphatidylglycerol (DPPC-POPG) 9:1 (w/w) and binary mixture of DPPC and oleic acid (DPPC-OA) were evaluated. The ability of TPGS to act as an antioxidant adjuvant for pulmonary surfactants was also evaluated. Compression isotherms of surfactant monolayers at 37 °C in a Langmuir-Blodgett trough showed that DPPC and DPPC:TPGS mixed monolayers (1:0.25-1:1, w/w) exhibited low minimum surface tensions (MST) of 1-2 mN/m. Similarly [DPPC:POPG (9:1, w/w)]:TPGS mixed films of 1:0.25-1:1 weight ratios reached 1-2 mN/m MST. DPPC:POPG:TPGS liposomes adsorbed to surface tensions of 29-31 mN/m within 1s. While monolayers of DPPC:OA (1:1, w/w) reached high MST of ～11 mN/m, DPPC:OA:TPGS (1:1:0.25, w/w) film reached near zero MST suggesting that low concentrations of TPGS reverses the effect of OA on DPPC monolayer. Capillary surfactometer studies showed DPPC:TPGS and [DPPC:POPG (9:1, w/w)]:TPGS liposomes maintained 84-95% airway patency. Fluorescence spectroscopy of Laurdan loaded DPPC:TPGS and DPPC:POPG:TPGS liposomes revealed no segregation of lipid domains in the lipid bilayer. Addition of TPGS to soybean liposome significantly reduced thiobarbituric acid reactive substance (TBARS) by 29-39% confirming its antioxidant nature. The results suggest a potential use of TPGS as an adjuvant to improve the surfactant activity as well as act as an antioxidant by scavenging free radicals.     

Effect of cationic surfactants on enhancement of firefly bioluminescence in the presence of liposomes

Firefly bioluminescence (BL) was greatly affected by cationic surfactants coexisting with liposomes containing phosphatidylcholine and cholesterol. In this study, the effects of the type and concentration of cationic surfactants on BL were studied in the presence of the liposomes. Three types of cationic surfactant: benzalkonium chloride (BAC), n-dodecyltrimethylammonium bromide (DTAB), and benzethonium chloride (BZC), were used. As a common effect in these surfactants, BL intensity was increased and then drastically decreased with increasing surfactant concentration. This can be explained by the formation of cationic liposomes as BL enhancers at low concentration of the surfactant, and by the transformation into cationic (mixed) micelles as inhibitors at high concentration. The maximal BL intensity and the concentration for the maximal BL were dependent on the type of the surfactants. To explain the differences in these parameters in the enhanced BL, we determined the distribution coefficient, K, of the surfactants to the liposomal membrane. The result indicated that the surfactant with higher K value gives the maximal BL intensity at lower concentration.     

Thermodynamics of self-assembling of hydrophobically modified cationic polysaccharides and their mixtures with oppositely charged surfactants in aqueous solution

Microcalorimetric techniques, combined with turbidity measurements, were used to study the thermodynamics of self-assembling of hydrophobically modified cationic polysaccharides and their mixtures with oppositely charged surfactants in aqueous solution. The studied polyelectrolytes were a series of polymers based on dextran having pendant N-(2-hydroxypropyl)-N,N-dimethyl-N-alkylammonium chloride groups randomly distributed along the polymer backbone. The parameters for their micellization process are evaluated from the results of the observed dilution enthalpy curves and compared with those of the related cationic surfactants (DTAC and CTAC). The microcalorimetric results for the mixed systems (polyelectrolytes with oppositely charged surfactants) are used along with turbidity measurements to characterize systematically the thermodynamics of their interaction. The phase behavior is described and the interaction enthalpies are derived from the differences between the observed enthalpy curves with and without polyelectrolyte. Therefore, we discuss in detail the effect of changing the alkyl chain length of polyelectrolyte pendant groups, the molecular weight of the dextran backbone, and the temperature of the measurements on the interactions between polyelectrolyte and surfactant.     

Interaction of tetraphenyl-porphyrin derivatives with DPPC-liposomes: an EPR study

The effect of the symmetry and polarity of the porphyrin molecules on their membrane localization and interaction with membrane lipids were investigated by electron paramagnetic resonance (EPR). For this purpose, two glycoconjugated tetraphenyl porphyrin derivatives were selected, respectively, symmetrically and asymmetrically substituted. Small unilamellar liposomes composed of dipalmitoylphosphatidylcholine (DPPC) and spin labeled stearic acids were prepared. The spin probe was located at the 5th or 7th or 12th or 16th position of the hydrocarbon chain in order to monitor various regions of the lipid bilayer. EPR spectra of porphyrin-free and porphyrin-bound liposomes were recorded at various temperatures below and above the phase transition temperature of DPPC. The effect on membrane fluidity proved to be stronger with the asymmetrical porphyrin derivative than with the symmetrical one. The rigidity increased when the spin label was near lipid head groups. The difference observed between control and porphyrin-treated samples when measured below the main lipid transition temperature disappeared at higher temperature. When the spin label was near the end of the hydrophobic tails, the symmetrical porphyrin derivative caused increase in fluidity, while the asymmetrical one slightly decreased it. To explain this phenomenon we propose that the asymmetrical derivative exerts a stronger ordering effect caused by its fluorophenyl group located at the level of the lipid heads, which is attenuated to the hydrophobic tails. The perturbing effect of the symmetric derivative could not lead to similar extent of ordering at the head groups and looses the hydrocarbon chains deeper in the membrane.     

Removal of solvent-based ink from printed surface of HDPE bottles by alkyltrimethylammonium bromides: effects of surfactant concentration and alkyl chain length

Three alkyltrimethylammonium bromides (i.e., dodecyl-, tetradecyl-, and hexadecyltrimethylammonium bromide or DTAB, TTAB, and CTAB, respectively) were used to remove a blue solvent-based ink from a printed surface of high-density polyethylene bottles. Either an increase in the alkyl chain length or the surfactant concentration was found to increase the deinking efficiency. Complete deinking was achieved at concentrations about 3, 8, and 24 times of the critical micelle concentration (CMC) of CTAB, TTAB, and DTAB, respectively. For CTAB, ink removal started at a concentration close to or less than its CMC and increased appreciably at concentrations greater than its CMC, while for TTAB and DTAB, significant deinking was only achieved at concentrations much greater than their CMCs. Corresponding to the deinking efficiency of CTAB in the CMC region, the zeta potential of ink particles was found to increase with increasing alkyl chain length and concentration of the surfactants, which later leveled off at some higher concentrations. Wettability of the surfactants on an ink surface increased with increasing alkyl chain length and concentration of the surfactants. Lastly, solubilization of ink binder in the surfactant micelles was found to increase with increasing alkyl chain length and surfactant concentration. We conclude that adsorption of surfactant on the ink pigment is crucial to deinking due to modification of wettability, zeta potential, pigment/water interfacial tension, and dispersion stability. Solubilization of binder (epoxy) into micelles is necessary for good deinking because the dissolution of the binder is required before the pigment particles can be released from the polymer surface.     

Interactions between chitosan and SDS at a low-charged silica substrate compared to interactions in the bulk--the effect of ionic strength

The effect of ionic strength on association between the cationic polysaccharide chitosan and the anionic surfactant sodium dodecyl sulfate, SDS, has been studied in bulk solution and at the solid/liquid interface. Bulk association was probed by turbidity, electrophoretic mobility, and surface tension measurements. The critical aggregation concentration, cac, and the saturation binding of surfactants were estimated from surface tension data. The number of associated SDS molecules per chitosan segment exceeded one at both salt concentrations. As a result, a net charge reversal of the polymer-surfactant complexes was observed, between 1.0 and 1.5 mM SDS, independent of ionic strength. Phase separation occurs in the SDS concentration region where low charge density complexes form, whereas at high surfactant concentrations (up to several multiples of cmc SDS) soluble aggregates are formed. Ellipsometry and QCM-D were employed to follow adsorption of chitosan onto low-charged silica substrates, and the interactions between SDS and preadsorbed chitosan layers. A thin (0.5 nm) and rigid chitosan layer was formed when adsorbed from a 0.1 mM NaNO3 solution, whereas thicker (2 nm) chitosan layers with higher dissipation/unit mass were formed from solutions at and above 30 mM NaNO3. The fraction of solvent in the chitosan layers was high independent of the layer thickness and rigidity and ionic strength. In 30 mM NaNO3 solution, addition of SDS induced a collapse at low concentrations, while at higher SDS concentrations the viscoelastic character of the layer was recovered. Maximum adsorbed mass (chitosan + SDS) was reached at 0.8 times the cmc of SDS, after which surfactant-induced polymer desorption occurred. In 0.1 mM NaNO3, the initial collapse was negligible and further addition of surfactant lead to the formation of a nonrigid, viscoelastic polymer layer until desorption began above a surfactant concentration of 0.4 times the cmc of SDS.     

Formation of monodisperse charged vesicles in mixtures of cationic gemini surfactants and anionic SDS

The aggregation behavior of catanionics formed by the mixture of cationic geminis derived from dodecyltrimethylammonium chloride (DTAC) and anionic sodium dodecylsulfate (SDS) was studied by means of phase studies and comprehensive small-angle neutron scattering (SANS) experiments at 25 °C and 50 mM overall concentration. The results are compared to those for the previously studied SDS + DTAC system. Various gemini spacers of different natures and geometries were used, but all of them had similar lengths: an ethoxy bridge, a double bond, and an aromatic ring binding the two DTACs in three different substitutions (ortho, meta, and para). SANS and SAXS data analysis indicates that the spacer has no large effect on the spheroidal micelles of pure surfactants formed at low concentration in water; however, specific effects appear with the addition of electrolytes. Microstructures formed in the catanionic mixtures are rather strongly dependent on the nature of the spacer. The most important finding is that for the hydrophilic, flexible ethoxy bridge, monodisperse vesicles with a fixed anionic/cationic charge ratio (depending only on the surfactant in excess) are formed. Furthermore, the composition of these vesicles shows that strongly charged aggregates are formed. This study therefore provides new opportunities for developing tailor-made gemini surfactants that allow for the fine tuning of catanionic structures.