Heterogeneous catalytic oxidation of ethanol: A new process for acetic acid

ESR investigations on ZnO doped with various amounts of -Al₂O₃ thermally treated, are reported. Experimental data are related to the electronic structure of ZnO--Al₂O₃ and to desulfurization specific activity for natural gas.

---

ZnO, -Al₂O₃. ZnO/-Al₂O₃ .

     

Effect of preparation method of nickel-zeolite catalysts on their catalytic properties

The effect of the carrier-gas (H₂, N₂, CO₂ and air) and the influence of additives (H₂S and water vapors) in the activation of Ni- and Cr-containing zeolites on their catalytic activity have been studied in toluene disproportionation.

---

- (H₂, N₂, CO₂ ) (H₂S ) , Ni Cr, .

     

Certified reference materials (CRM 408 and 409) for quality control of main components (ammonium, calcium, hydronium, magnesium, nitrate, potassium, sodium and sulphate) in simulated rain water

Analyses of rainwater are routinely performed by a number of organisations to monitor the contribution from rainwater to the component occurrences in the environment and the acidification of the environment. To control the quality of such determinations, the Community Bureau of Reference (BCR) has organised a certification campaign to produce two simulated rainwater reference materials (CRM 408, low mineral content and CRM 409, high mineral content). The materials were carefully prepared (addition of pro analysis and supra pure reagents with the mentioned elements to silica-free deionised water) and its homogeneity and long-term stability were verified. The materials were certified for their contents of ammonium (106 mol/kg) (CRM 409), calcium (7.68 and 15.5 mol/kg), chloride (67.3 and 113 mol/kg), hydronium (16.6 and 48.0 mol/kg), magnesium (6.14 and 12.3 mol/kg), nitrate (20.1 and 78.1 mol/kg), potassium (4.25 mol/kg) (CRM 409), sodium (42.0 and 82.9 mol/kg) and sulphate (10.5 and 53.2 mol/kg). Indicative values (not certified) are given for ammonium and potassium in CRM 408. This paper presents the certification work performed, as well as the analytical work for the certification of the contents of relevant species.     

Characterization of airborne particulates by laser microprobe mass analysis

Summary Laser microprobe mass analysis (LAMMA) was applied to characterize aerosol particles collected and separated from 16m to 0.06m by a low pressure cascade impactor. Positive ion LAMMA spectra showed characteristic molecular peaks such as PbCl⁺, a series of Si₂O⁺–Si₂O₄ ⁺ and NaAl₂Si₂O₂ ⁺–NaAl₂Si₂O₅ ⁺, and TiO⁺ in 0.06–0.12m, 0.5–1m and 4–8m fraction, respectively. In the negative ion LAMMA spectra, it was observed that the fragment peaks of sulfate ions were deficient above 2m and those of nitrate ions were deficient under 2m. LAMMA allows remarkable insights into the chemical nature of aerosol particles.

---

Charakterisierung luftgetragener Teilchen durch Laser-Microprobe-Massenspektrometrie

Zusammenfassung Laser-Microprobe-Spektrometrie (LAMMS) wurde zur Analyse atmosphärischen Aerosols herangezogen, welches im Korngrößenbereich zwischen 16m und 0.06m mit einem Niederdruckkaskadenimpaktor fraktioniert gesammelt wurde. Positive LAMMS-Spektren zeigten charakteristische molekulare Peaks, wie etwa PbCl⁺, eine Serie von Si₂O⁺–Si₂O₄ ⁺ und NaAl₂Si₂O₂ ⁺–NaAl₂Si₂O₅ ⁺, sowie TiO⁺ in der 0,06–0,12-m,- 0,5–1–m- bzw. 4–8-m-Fraktion. In den negativen LAMMS-Spektren konnten über 2m keine Fragmentpeaks für Sulfationen, unter 2m. keine für Nitrationen beobachtet werden. LAMMS ermöglicht eine bemerkenswerte Einsicht in die chemische Natur von Aerosolteilchen.

     

Role of metal center in reactions of polynuclear nickel(ii) and cobalt(ii) trimethylacetates with 8-amino-2,4-dimethylquinoline

The reactions of 8-amino-2,4-dimethylquinoline (L) (1) with polynuclear nickel(ii) and cobalt(ii) hydroxotrimethylacetato complexes under anaerobic conditions were studied. The nonanuclear cluster Ni₉(₄-OH)₃(₃-OH)₃(_n-OOCCMe₃)₁₂(HOOCCMe₃)₄ gave the mononuclear complex Ni(²-L)(²-OOCCMe₃)₂ (2). The tetranuclear complex Ni₄(₃-OH)₂(-OOCCMe₃)₄(²-OOCCMe₃)₂(EtOH)₆ produced the mononuclear complex Ni(²-L)(²-OOCCMe₃)(OOCCMe₃)L (3). At room temperature, the cobalt-containing polynuclear trimethylacetates, viz., the polymer [Co(OH) _n (OOCCMe₃)_2–n ] _x and the tetranuclear complex Co₄(₃-OH)₂(-OOCCMe₃)₄(²-OOCCMe₃)₂(EtOH)₆, were transformed into the trinuclear cobalt(ii) complex Co₃(₃-OH)(-OOCCMe₃)₄(²-L)₂(OOCCMe₃) (4). Meanwhile, at 80 °C these compounds generated the binuclear cobalt(iii) complex Co₂(₂²-(HN)C₉NMe₂)₂(-OOCCMe₃)(L)(OOCCMe₃)₃ (5). The structures of the resulting compounds were established by X-ray diffraction analysis. Compounds 2—4 exhibit the antiferromagnetic spin-spin exchange coupling, whereas compound 5 is diamagnetic.     

Determination of traces of sodium alkylbenzenesulphonate by high-performance liquid chromatography. Application to water

Summary For the trace determination of sodium alkylbenzenesulphonate (ABS) by HPLC the following conditions were employed: Shimadzu ZORBAX SIL Column (5 m, 4.6 mm i.d. x 150 mm) as stationary phase, 0.2% ammoniaethanol (v/v) as mobile phase, UV detector at 225 nm, injection volume 12 l. The chromatograms of ABS were simple and sharp (detection limit of ABS 0.02 g in 12 l of ethanol). The calibration curves of ABS were linear in a concentration range of 0.03 0.3 g in 12 l of ethanol. In the case of linear sodium dodecylbenzenesulphonate positive errors of 1 4% were caused by non-ionic surfactants or laurylsulphate (6 times excess), 10 50% positive errors were caused by 2 6 times excess of household detergents.Standard water samples containing ABS were treated with a weak base anion-exchange resin, the adsorbed ABS were eluted, and then determined either by HPLC or by the methylene blue spectrophotometric method. Recoveries of ABS in water were about 92 107% by HPLC.

---

Bestimmung von Spuren Natriumalkylbenzolsulfonat mit Hilfe der HPLC. Anwendung auf Wasser

Zusammenfassung Für die Spurenbestimmung von Natriumalkylbenzolsulfonat (ABS) durch HPLC werden die folgenden Bedingungen empfohlen:Shimadzu ZORBAX SIL (5 m, 4,6 mm x 150 mm) als stationäre Phase, 0,2% Ammoniak/Ethanol als mobile Phase, UV-Detektor bei 225 nm, Injektionsvolumen 12 l. Die erhaltenen Chromatogramme sind einfach und scharf (Nachweisgrenze 0,02 g in 12 ml Ethanol). Die Eichkurven sind im Konzentrationsbereich von 0,03–0,3 g in 12 l Ethanol linear. Im Falle des linearen Natriumdodecylbenzolsulfonats werden bei Anwesenheit von nicht-ionischen oberflächenaktiven Substanzen oder von Laurylsulfat in 6fachem Überschuß positiver Fehler von 1–4% erhalten; bei 2–6fachem Überschuß von Haushaltswaschmitteln ergeben sich positive Fehler von 10–50%.Standard-Wasserproben werden zunächst einer Behandlung mit einem Anionenaustauscher unterzogen, die adsorbierten ABS eluiert und durch HPLC oder nach der Methylenblaumethode analysiert. Wiederfindungsraten liegen bei 92–107%.

     

Hydrogen profiling in thin films using coincident ERD

By using the coincident measurement, an ERD method has been established and used for hydrogen profiling in thin foils. In the present study, 6 MeV has been used as incident particle, the scattered and the recoiled proton from one collision were coincidentally detected at 150 (proton) and 173.9 (). This method has been used for hydrogen profiling of 5.6 m Mylar and 8.6 m aluminium foils. Because of the coincident measurement, the background is largely reduced, and its minimum detection limit is about 0.5% (atomic), lower than the conventional ERD method. The measured depth resolution in 5.6 m Mylar is 0.6 m. It is possible to use this method for hydrogen profiling in thin foils of several micron thickness.     

Reactivity and flexibility in platinum metal clusters

The synthesis, structural properties, and fluxional behaviour of platinum-triosmium and platinum-triruthenium clusters derived from Os₃Pt(-H)₂ (CO)₁₀(PR₃) and Ru₃Pt(-H)(-CC ^t Bu)(CO)₉ (dppe) and related species are described.     

Binuclear Osmium μ-Oxocarboxylate Complexes [Os2(μ-O)(μ-O2CR)2Cl4L2] (R = CH3, CCl3; L = PPh3, AsPh3) and Their Electrochemical Behavior in Dichloromethane

Cyclic voltammetry and galvanostatic coulometry techniques were used to determine how the redox properties of osmium binuclear -oxocarboxylates [Os₂ ^IV(-O)(-O₂CR)₂Cl₄L₂] (R = CH₃, CCl₃; L = PPh₃ and R = CH₃; L = AsPh₃) are influenced by the nature of the bridging carboxylate ligand RCOO^– and ligand L. It was shown that all compounds in solution of dichloromethane undergo two single-electron reduction processes. The data obtained were compared with the DFT calculations of the electronic structure of the model complexes [Os₂ ^IV(-O)(-O₂CR)₂Cl₄L₂] (R = CH₃, CCl₃; L = PH₃ and R = CH₃; L = AsH₃).     

Nuclear interferences of uranium and thorium in a reactor neutron activation analysis determination of cerium using the radionuclides141Ce and143Ce

The interference contributions of uranium and thorium to the determination of cerium based on radionuclides¹⁴¹Ce and¹⁴³Ce produced by irradiation in a reactor core was determined. The values of the interference contributions for¹⁴¹Ce were 0.28±0.01 g Ce/g U and /2.01±0.05/x10^–3 g Ce/g Th, and for¹⁴³Ce 1.33±0.03 g Ce/g U and /9.0±0.2/x10^–3 g Ce/g Th.     

A new spot test reagent for chromium(VI), vanadium(V), and hexacyanoferrate(III) ions: the schiff base from 4,4′-methylenedianiline and 4-dimethylaminobenzaldehyde

Summary A new Schiff base, bis(4-dimethylaminobenzylidine)4,4-methylenedianiline (I) has been prepared by reacting 4-dimethylaminoben-zaldehyde with 4,4-methylenedianiline. A 1% solution ofI in conc. sulphuric acid gives a deep red or blood red colour with Cr(VI), and V(V), and a deep rose red colour with [Fe(CN)₆]^3-. The limits of detection and dilution are 0.7 g, 171,000 for Cr(VI); 5 g, 110,000 for V(V); and 7 g, 17,100 for [Fe(CN)₆]^3-. Cr(III), V(IV), and [Fe(CN)₆]^4- do not interfere. The effects of common anions and cations are reported.

---

Zusammenfassung Durch Umsetzung von 4-Dimethylaminobenzaldehyd mit 4,4-Methylen-dianilin wurde eine neue Schiffsche Base hergestellt, deren 1%ige Lösung in konz. Schwefelsäure eine tiefrote oder blutrote Farbe mit Cr(VI) und V(V), eine tiefrosa Farbe mit [Fe(CN)₆]^3– gibt. Die Nachweisgrenzen bzw. die Grenzkonzentrationen betragen: 0,7 g, 171000 für Cr(VI), 5 g, 110000 für V(V) und 7 g, 17100 für [Fe(CN)]₆ ^3–. Cr(III), V(IV) und [Fe(CN)₆]^4– stören nicht. Der Einfluß gängiger Anionen und Kationen wird angegeben.

     

Optically active triosmium clusters containing the cysteine ligand

The reactions of cysteine ethyl ester with a series of triosmium clusters have been studied. Enantiomeric (-H)Os₃{-SCH₂CH(CO₂Et)NH₂}(CO)₁₀ and diastereomeric (-H)Os₃{-²-SCH₂CH(CO₂Et)NH₂}(CO)₉ forms of the optically active cluster complexes have been obtained. Diastereomeric clusters have been separated by TLC on Silufol plates. The treatment of the enantiomeric complex (-H)Os₃{-SCH₂CH(CO₂Et)NH₂}(CO)₁₀ with the trimethylamine oxide yields the diastereomeric pair (-H)Os₃{-²-SCH₂CH(CO₂Et)NH₂}(CO)₉. The structures of the complexes obtained have been established on the basis of IR,¹H NMR and mass spectrometry as well as X-ray analysis data.Translated fromIzyestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 1981–1984, November, 1993.     

The thermal decomposition of disodium propan-2-one-l,3-disulphonate

The thermal decomposition of disodium propan-2-one-1,3-disulphonate (NaO₃S.CH₂.CO.CH₂.SO₃Na) in atmospheres of both oxygen and nitrogen proceded by a complete molecular disruption with sodium sulphate or mixtures of sodium sulphate and sodium carbonate as the final residues. No organic compounds were detected in the volatile products.

---

Zusammenfassung Die thermische Zersetzung des Dinatriumpropan-2-on-l,3-disulfonats (NaO₃S.CH₂.CO.CH₂.SO₃Na) vollzog sich sowohl in Sauerstof-fals in Stickstoff-Atmosphäre unter vollständiger Zerstörung des Moleküls mit Natriumsulfat oder Mischungen von Natriumsulfat und Natriumcarbonat als Restprodukt. Unter den flüchtigen Produkten wurden keine organischen Verbindungen nachgewiesen.

---

Résumé La décomposition thermique du disulfite de sodium 1,3 one 2 propane (NaO₃S. CH₂.CO.CH₂.SO₃Na) s'effectue avec disruption moléculaire complète et obtention de résidus constitués de sulfate de sodium ou de mélanges de sulfate de sodium et de carbonate de sodium, tant en atmosphère d'oxygène que d'azote. Aucun composé organique n'est détecté dans les produits volatils.

---

--2--1,3- (NaO₃S. CH₂. CO. CH₂. SO₃Na) . .

     

Differential pulse voltammetric methods for the simultaneous estimation of uranium-iron and uranium-cadmium mixtures in solution

Differential pulse voltammetric methods have been developed for the simultaneous estimation of the constituents of uranium-iron and uranium-cadmium mixtures in solution. A mixture of 1M H₃PO₄–1M KH₂PO₄ (with a pH1.5), was found to be the most ideal supporting electrolyte for both methods, among many that were evaluated for their suitability. In uranium-iron mixtures the calibration for iron was found to be linear up to 150 g ml^–1 (r²=0.9986), while that of uranium up to 500 g ml^–1 (r²=0.999). Iron at 6.7 g ml^–1 level could be determined in the presence of 800 fold uranium (wt/wt) without significant interference. Uranium at 21 g ml^–1 level could be analyzed with 5-fold iron (wt/wt). This upper limit of iron was due to the precipitation of iron as phosphate. In the case of uranium — cadmium mixtures, cadmium calibration for cadmium was found to be linear up to 1300 g ml^–1 (r²=0.9993). Concentration levels of 4.6 g ml^–1 Cd could be determined at a 500-fold excess (wt/wt) of uranium. Uranium calibration was linear up to 500 g ml^–1 (r²=0.999) and 21 g ml^–1 uranium could tolerate up to a 1000-fold excess of cadmium (wt/wt). Both procedures could tolerate 10 g ml^–1 levels of metal ions, such as chromium, copper, manganese, molybdenum and vanadium.     

New Molybdenum(V) Complexes Prepared by the Oxidation of Dinuclear Quadruply-Bonded Molybdenum(II) Monothiocarboxylates

Oxidation of molybdenum(II) thiopivalate and thiobenzoate in the presence of -picoline or pyridine results in the formation of dinuclear molybdenum(V) complexes of the general formulae [Mo₂O₂(-O)₂(-SO₄)L₄] with L = -picoline or pyridine and [Mo₂O₂(-O)(-S)(-SO₄)L₄] with L = -picoline. As determined by X-ray structure analysis, two complexes with -picoline differ in their bridging cores: In one complex, two Mo atoms are doubly bridged through two oxygen atoms; in the other, one Mo atom is doubly bridged through oxygen and sulfur atoms. However, they both crystallize together. The product is solvated with -picoline and water molecules. Molybdenum atoms exhibit distorted octahedral coordinations. The same complexes were prepared also through direct reactions of [Mo₂O₃(O₂CCH₃)₄] with thiopivalic and thiobenzoic acid in the presence of -picoline or pyridine. The appearance of the oxo-oxygens and sulfido-sulfur as well as sulfato ligand is explained by the molybdenum-catalyzed oxidation of thiocarboxylates.     

Determination ofo-Cresol Red in Xylenol Orange and semi-Xylenol Orange by third-order derivative spectrophotometry

A new method is proposed for the determination ofo-Cresol Red in Xylenol Orange and semi-Xylenol Orange by third-order derivative spectrophotometry at 491 nm in a medium of 0.09 mol/1 sulphuric acid. A linear relationship exists between d³A/d³ and theo-Cresol Red concentration (1–12 g/ml), with a standard deviation of 0.11 g/ml (n = 8) for 10 g/ml ofo-Cresol Red.Presented at the 34th IUPAC Conference (1993)     

The oxidative addition of diphenylphosphine and monophenylphosphine to the electron-rich rhenium-rhenium triple bond. The isolation and characterization of compounds that contain the four-center Re(μ-X)(μ-PR2)Re cluster (X=halide)

Diphenylphosphine oxidatively adds to the ReRe bonds of Re₂ X ₄(-dppm)₂ (X=Cl or Br; dppm=Ph₂PCH₂PPh₂) and Re₂Cl₄(-dpam)₂ (dpam=Ph₂AsCH₂AsPh₂) to afford the dirhenium(III) complexes Re₂(-X)(-PPh₂)HX ₃(-LL)₂. The dppm complexes have also been prepared from the reactions of Re₂(-O₂CCH₃)X ₄(-dppm)₂ with Ph₂PH, and a similar strategy has been used to prepare Re₂(-Cl)(-PPh₂)HCl₃(-dmpm)₂ (dmpm=Me₂PCH₂PMe₂) from Re₂(-O₂CCH₃)Cl₄(dmpm)₂. Phenylphosphine likewise reacts with Re₂ X ₄(-dppm)₂ to give Re₂(-X)(-PHPh)HX ₃(-dppm)₂. An X-ray crystal structure determination on Re₂(-Cl)(-PPh₂)HCl₃(-dppm)₂ confirms its edge-shared bioctahedral structure. This complex crystallizes in the space group (No. 148) witha=21.699(3) Å, =84.50(4)°,V=10084(5) ų, andZ=6. The structure was refined toR=0.049 (R _w 0.069) for 5770 data withI>3.0(I). The Re-Re distance is 2.5918(7) Å. Oxidation of the bromide complex Re₂(-Br)(-PPh₂)HBr₃(-dppm)₂ with NOPF₆ produces the unusual dirhenium(III, II) cation [Re₂(-H)(-Br)[P(O)Ph₂]Br₂(NO)(-dppm)₂]⁺ which has been structurally characterized as its perrhenate salt, [Re₂(-H)(-Br)[P(O)Ph₂]Br₂(NO)(-dppm)₂]ReO₄ · 2CH₂Cl₂. This complex crystallizes in the space group (No. 2) witha=14.187(7) Å,b=16.419(5) Å,c=16.729(5) Å, =98.76(2)°, =110.11(3)°, =104.66(3)°,V=3414(6) ų,Z=2. The structure was refined toR=0.040 (R _w =0.051) for 5736 data withI>3.0(I). The presence of a phosphorus-bound [P(O)Ph₂]^– ligand, a linear nitrosyl and a bridging hydrido ligand has been confirmed. The Re-Re distance is 2.6273(8) Å.     

Crystallization Behavior of Alkoxy-Derived Cordierite Gels

Alkoxy-derived cordierite gels were synthesized from tetraethylorthosilicate (TEOS), aluminum isopropoxide (Al(OPr ⁱ )₃), and magnesium ethoxide (Mg(OEt)₂). TEOS was partially hydrolyzed at molar ratios H₂O/TEOS = 1.2, in the presence of hydrochloric acid as a catalyst, HCl/TEOS = 0.1. Aluminum and magnesium alkoxides were added successively or as a double alkoxide. Phase transformations occurring in the gel were studied by differential thermal analysis, x-ray diffractometry, and Fourier-transform infrared spectroscopy. In all cases, -cordierite crystallized at similar temperatures (950–1000°C) with small amounts of spinel, which confirms dominant influence of the optimal conditions for partial hydrolysis of TEOS on the gels homogeneity. The transformation of - into -cordierite began at about 1100°C. Broadening of diffraction peaks and appearance of new bands in the FT IR spectra confirmed the transformation of - into modulated -cordierite at temperatures above 1300°C. Differential thermal analysis under nonisothermal conditions also proved homogeneous nucleation with constant rate and three-dimensional crystallite growth during -cordierite crystallization. The overall activation energy of the crystallization of -cordierite is 580 ± 81 kJ/mol.     

New cobalt trimethylacetate complexes with pyridine

The reaction of the tetranuclear trimethylacetate complex Co₄(₃-OH)₂(-OOCCMe₃)₄(²-OOCCMe₃)₂(EtOH)₆ with pyridine in acetonitrile was studied. Two new compounds, viz., the hexanuclear cobalt(ii) complex Co₆py₄(₃-OH)₂(-OOCCMe₃)₁₀ (25% yield) and the unusual ionic compound [Co₃py₃(₃-O)(-OOCCMe₃)₆]⁺[Co₄py(₄-O)(-OOCCMe₃)₇]^– (5% yield), were prepared. The structures of the new compounds were established by X-ray diffraction analysis.     

Path of “dry” electrons before localization in liquid hydrocarbons

Conclusions On the basis of measurements of values of in liquid hydrocarbons, it has been shown that the path length before localization of a photoliberated electron increases with increasing mobility of the excess electron, from approximately 40 Å (methylcyclohexane) to 200 Å (isooctane). In a liquid with10^–2 cm²/V·sec (methylcyclohexane, hexane), the localization takes place before or immediately after thermalization of the electron. In a liquid with>10^–1 cm²/V·sec, the electron passes through the main part of its path before localization, being in thermal equilibrium with the medium.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 10, pp. 2198–2203, October, 1985.