The use of proteotypic peptide libraries for protein identification

This paper describes an algorithm to apply proteotypic peptide sequence libraries to protein identifications performed using tandem mass spectrometry (MS/MS). Proteotypic peptides are those peptides in a protein sequence that are most likely to be confidently observed by current MS-based proteomics methods. Libraries of proteotypic peptide sequences were compiled from the Global Proteome Machine Database for Homo sapiens and Saccharomyces cerevisiae model species proteomes. These libraries were used to scan through collections of tandem mass spectra to discover which proteins were represented by the data sets, followed by detailed analysis of the spectra with the full protein sequences corresponding to the discovered proteotypic peptides. This algorithm (Proteotypic Peptide Profiling, or P3) resulted in sequence-to-spectrum matches comparable to those obtained by conventional protein identification algorithms using only full protein sequences, with a 20-fold reduction in the time required to perform the identification calculations. The proteotypic peptide libraries, the open source code for the implementation of the search algorithm and a website for using the software have been made freely available. Approximately 4% of the residues in the H. sapiens proteome were required in the proteotypic peptide library to successfully identify proteins.     

Homogeneous Oligomeric Ligands Prepared via Radical Polymerization that Recognize and Neutralize a Target Peptide

Abiotic ligands that bind to specific biomolecules have attracted attention as substitutes for biomolecular ligands, such as antibodies and aptamers. Radical polymerization enables the production of robust polymeric ligands from inexpensive functional monomers. However, little has been reported about the production of monodispersed polymeric ligands. Herein, we present homogeneous ligands prepared via radical polymerization that recognize epitope sequences on a target peptide and neutralize the toxicity of the peptide. Taking advantage of controlled radical polymerization and separation, a library of multifunctional oligomers with discrete numbers of functional groups was prepared. Affinity screening revealed that the sequence specificity of the oligomer ligands strongly depended on the number of functional groups. The process reported here will become a general step for the development of abiotic ligands that recognize specific peptide sequences.     

Effect of molecular conformations on the adsorption behavior of gold-binding peptides

Despite extensive recent reports on combinatorially selected inorganic-binding peptides and their bionanotechnological utility as synthesizers and molecular linkers, there is still only limited knowledge about the molecular mechanisms of peptide binding to solid surfaces. There is, therefore, much work that needs to be carried out in terms of both the fundamentals of solid-binding kinetics of peptides and the effects of peptide primary and secondary structures on their recognition and binding to solid materials. Here we discuss the effects of constraints imposed on FliTrx-selected gold-binding peptide molecular structures upon their quantitative gold-binding affinity. We first selected two novel gold-binding peptide (AuBP) sequences using a FliTrx random peptide display library. These were, then, synthesized in two different forms: cyclic (c), reproducing the original FliTrx gold-binding sequence as displayed on bacterial cells, and linear (l) dodecapeptide gold-binding sequences. All four gold-binding peptides were then analyzed for their adsorption behavior using surface plasmon resonance spectroscopy. The peptides exhibit a range of binding affinities to and adsorption kinetics on gold surfaces, with the equilibrium constant, Keq, varying from 2.5x10(6) to 13.5x10(6) M(-1). Both circular dichroism and molecular mechanics/energy minimization studies reveal that each of the four peptides has various degrees of random coil and polyproline type II molecular conformations in solution. We found that AuBP1 retained its molecular conformation in both the c- and l-forms, and this is reflected in having similar adsorption behavior. On the other hand, the c- and l-forms of AuBP2 have different molecular structures, leading to differences in their gold-binding affinities.     

How much peptide sequence information is contained in ion trap tandem mass spectra?

Matching peptide tandem mass spectra to their cognate amino acid sequences in databases is a key step in proteomics. It is usually performed by assigning a score to a spectrum-sequence combination. De novo sequencing or partial de novo sequencing is useful for organisms without sequenced genome or for peptides with unexpected modifications. Here we use a very large, high accuracy proteomic dataset to investigate how much peptide sequence information is present in tandem mass spectra generated in a linear ion trap (LTQ). More than 400,000 identified tandem mass spectra from a single human cancer cell line project were assigned to 26,896 distinct peptide sequences. The average absolute fragment mass accuracy is 0.102 Da. There are on average about four complementary b- and y-ions; both series are equally represented but y ions are 2- to 3-fold more intense up to mass 1000. Half of all spectra contain uninterrupted b- or y-ion series of at least six amino acids and combining b- and y-ion information yields on average seven amino acid sequences. These sequences are almost always unique in the human proteome, even without using any precursor or peptide sequence tag information. Thus, optimal de novo sequencing algorithms should be able to obtain substantial sequence information in at least half of all cases.     

Separation of Amadori peptides from their unmodified analogs by ion-pairing RP-HPLC with heptafluorobutyric acid as ion-pair reagent

Glycation is a common class of nonenzymatic posttranslational modifications relevant for several diseases and cell aging in general, such as D-glucose-derived modifications at the ɛ-amino groups of lysine residues in blood proteins, especially albumin, immunoglobulin, and hemoglobin, for diabetic patients. These Amadori compounds are identified on the peptide level after enzymatic digestion and chromatographic separation by mass spectrometry. Their syntheses usually rely on a global glycation approach. Both areas require the reliable separation of glycated peptides from their unmodified congeners present in different ratios, which is typically not achieved by standard eluent systems in ion-pairing RP-HPLC (IP-RPLC). Here, we compare aqueous acetonitrile and methanol gradients containing either trifluoroacetic acid (TFA) or heptafluorobutyric acid (HFBA) as ion-pairing agents to separate such peptide pairs. TFA-containing eluents resulted in rather low resolutions, and the glycated and unglycated peptides often coeluted. HFBA increased the retention times of the unmodified peptide more than for the glycated peptide thereby improving the separation of all eight studied peptide pairs, even achieving baseline separations for some sequences. Thus the use of HFBA as ion-pair reagent provides a universally applicable eluent system in IP-RPLC to separate glycated peptides from their unmodified counterparts, even at the preparative scale required for synthetic peptides.     

Development of designed site-directed pseudopeptide-peptido-mimetic immunogens as novel minimal subunit-vaccine candidates for malaria

Synthetic vaccines constitute the most promising tools for controlling and preventing infectious diseases. When synthetic immunogens are designed from the pathogen native sequences, these are normally poorly immunogenic and do not induce protection, as demonstrated in our research. After attempting many synthetic strategies for improving the immunogenicity properties of these sequences, the approach consisting of identifying high binding motifs present in those, and then performing specific changes on amino-acids belonging to such motifs, has proven to be a workable strategy. In addition, other strategies consisting of chemically introducing non-natural constraints to the backbone topology of the molecule and modifying the α-carbon asymmetry are becoming valuable tools to be considered in this pursuit. Non-natural structural constraints to the peptide backbone can be achieved by introducing peptide bond isosters such as reduced amides, partially retro or retro-inverso modifications or even including urea motifs. The second can be obtained by strategically replacing L-amino-acids with their enantiomeric forms for obtaining both structurally site-directed designed immunogens as potential vaccine candidates and their Ig structural molecular images, both having immuno-therapeutic effects for preventing and controlling malaria.     

Adsorption behavior of linear and cyclic genetically engineered platinum binding peptides

Recently, phage and cell-surface display libraries have been adapted for genetically selecting short peptides for a variety of inorganic materials. Despite the enormous number of inorganic-binding peptides reported and their bionanotechnological utility as synthesizers and molecular linkers, there is still a limited understanding of molecular mechanisms of peptide recognition of and binding to solid materials. As part of our goal of genetically designing these peptides, understanding the binding kinetics and thermodynamics, and using the peptides as molecular erectors, in this report we discuss molecular structural constraints imposed upon the quantitative binding characteristics of peptides with an affinity for inorganics. Specifically, we use a high-affinity seven amino acid Pt-binding sequence, PTSTGQA, as we reported in earlier studies and build two constructs: one is a Cys-Cys constrained "loop" sequence (CPTSTGQAC) that mimics the domain used in the pIII tail sequence of the phage library construction, and the second is the linear form, a septapeptide, without the loop. Both sequences were analyzed for their adsorption behavior on Pt thin films by surface plasmon resonance (SPR) spectroscopy and for their conformational properties by circular dichroism (CD). We find that the cyclic peptide of the integral Pt-binding sequence possesses single or 1:1 Langmuir adsorption behavior and displays equilibrium and adsorption rate constants that are significantly larger than those obtained for the linear form. Conversely, the linear form exhibits biexponential Langmuir isotherm behavior with slower and weaker binding. Furthermore, the structure of the cyclic version was found to adopt a random coil molecular conformation, whereas the linear version adopts a polyproline type II conformation in equilibrium with the random coil. The 2,2,2-trifluoroethanol titration experiments indicate that TFE has a different effect on the secondary structures of the linear and cyclic versions of the Pt binding sequence. We conclude that the presence of the Cys-Cys restraint affects both the conformation and binding behavior of the integral Pt-binding septapeptide sequence and that the presence or absence of constraints could be used to tune the adsorption and structural features of inorganic binding peptide sequences.     

Inhibition of amyloid aggregation by formation of helical assemblies

The formation of amyloid aggregates is responsible for a wide range of diseases, including Alzheimer's and Parkinson's disease. Although the amyloid-forming proteins have different structures and sequences, all undergo a conformational change to form amyloid aggregates that have a characteristic cross-β-structure. The mechanistic details of this process are poorly understood, but different strategies for the development of inhibitors of amyloid formation have been proposed. In most cases, chemically diverse compounds bind to an elongated form of the protein in a β-strand conformation and thereby exert their therapeutic effect. However, this approach could favor the formation of prefibrillar oligomeric species, which are thought to be toxic. Herein, we report an alternative approach in which a helical coiled-coil-based inhibitor peptide has been designed to engage a coiled-coil-based amyloid-forming model peptide in a stable coiled-coil arrangement, thereby preventing rearrangement into a β-sheet conformation and the subsequent formation of amyloid-like fibrils. Moreover, we show that the helix-forming peptide is able to disassemble mature amyloid-like fibrils.     

Identification and quantification of different species in animal fibres by LC/ESI‐MS analysis of keratin‐derived proteolytic peptides

In the present paper, a proteomic method for species determination in fibres has been developed. Keratin was extracted from yak, wool and cashmere fibres and digested by trypsin, providing peptide mixtures that were analyzed by liquid chromatography coupled with electrospray mass spectrometry (LC/ESI‐MS) in order to identify peptidic species‐specific markers able to differentiate the fibres. Several suitable peptide markers were identified and validated in different fibres of different origin and having undergone different technological treatments, showing 100% specificity and 100% selectivity. Most of the peptide markers were also identified by means of high‐resolution mass spectrometry, confirming the origin from species‐specific keratin sequences. Some peptides were also used for the quantification of the different species in mixed fibres by LC/ESI‐MS. Validation experiments and blind tests confirmed their ability to act as very specific quantitative and qualitative markers. The method here developed is a valid complement to the standard benchmark methods for fibre identification and quantification and will be very useful for assessing the authenticity of textile products. Copyright © 2013 John Wiley & Sons, Ltd.     

An Optimized Protocol for the Synthesis of Peptides Containing trans-Cyclooctene and Bicyclononyne Dienophiles as Useful Multifunctional Bioorthogonal Probes

Despite the great advances in solid-phase peptide synthesis (SPPS), the incorporation of certain functional groups into peptide sequences is restricted by the compatibility of the building blocks with conditions used during SPPS. In particular, the introduction of highly reactive groups used in modern bioorthogonal reactions into peptides remains elusive. Here, we present an optimized synthetic protocol enabling installation of two strained dienophiles, trans-cyclooctene (TCO) and bicyclononyne (BCN), into different peptide sequences. The two groups enable fast and modular post-synthetic functionalization of peptides, as we demonstrate in preparation of peptide-peptide and peptide-drug conjugates. Due to the excellent biocompatibility, the click-functionalization of the peptides can be performed directly in live cells. We further show that the introduction of both clickable groups into peptides enables construction of smart, multifunctional probes that can streamline complex chemical biology experiments such as visualization and pull-down of metabolically labeled glycoconjugates. The presented strategy will find utility in construction of peptides for diverse applications, where high reactivity, efficiency and biocompatibility of the modification step is critical.     

Determination of sequence-specific intrinsic size parameters from cross sections for 162 tripeptides

Ion mobility and mass spectrometry techniques have been used to measure cross sections for 162 tripeptide sequences (27 different sets of six sequence isomers). The isomers have the general forms ABC, ACB, BAC, BCA, CAB, and CBA, where A corresponds to the amino acids Asp, Glu, or Gly, B corresponds to Lys, Arg, or Leu, and C corresponds to Phe, Tyr, or Ser. From these data, we derive a set of size parameters for individual amino acids that reflect the position of the amino acid in the sequence. These sequence-specific intrinsic size parameters (SSISPs) are used to retrodict cross-section values for the 162 measured sequences and to predict cross sections for all remaining tripeptide sequences (567 different sequences) that are comprised of these residues. In several types of peptide compositions, the position of the amino acid in the sequence has a significant impact on the parameter that is derived. For example, the sequence-specific intrinsic size parameter for leucine in the third position of a peptide (SSISP(Leu3)) is approximately 10% larger than SSISP(Leu1). On average, cross sections that are derived using SSISPs provide a better representation of the experimental value than those derived from composition only intrinsic size parameters, derived as described previously (Valentine et al. J. Phys. Chem. 1999, 103, 1203). Finally, molecular modeling techniques are used to derive some insight into the origin of cross-section differences that arise from sequence variation.     

Catalysis with phosphine-containing amino acids in various "turn" motifs

We have been actively involved in the development of parallel approaches for the discovery of phosphine ligands. Our approach has been based on the incorporation of phosphine-containing amino acids into peptide sequences that are designed to have stable secondary structures. We have examined helical and turn secondary structures and have reported that alkylation of cyclopentenyl acetate with dimethylmalonate can be catalyzed in high enantiomeric excess (ee) with a beta-turn-based ligand. The importance of the peptide secondary structure was demonstrated through the synthesis of a series of peptide ligands where the nature of the turn-forming residues was probed. Additionally, other turn-forming units and a variety of different phosphine-containing amino acids have been examined for their ability to control the selectivity of the allylation reaction. This paper reports the results obtained through the examination of different turn motifs as well as different phosphine substitutions on the "best" turn sequence, Pps-Pro-d-Xxx-Pps.     

Protein identification based on matrix assisted laser desorption/ionization-post source decay-mass spectrometry.

Due to its very short analysis time, its high sensitivity and ease of automation, matrix-assisted laser desorption/ionization (MALDI)-peptide mass fingerprinting has become the preferred method for identifying proteins of which the sequences are available in databases. However, many protein samples cannot be unambiguously identified by exclusively using their peptide mass fingerprints (e.g., protein mixtures, heavily posttranslationally modified proteins and small proteins). In these cases, additional sequence information is needed and one of the obvious choices when working with MALDI-mass spectrometry (MS) is to choose for post source decay (PSD) analysis on selected peptides. This can be performed on the same sample which is used for peptide mass fingerprinting. Although in this type of peptide analysis, fragmentation yields are very low and PSD spectra are often very difficult to interpret manually, we here report upon our five years of experience with the use of PSD spectra for protein identification in sequence (protein or expressed sequence tag (EST)) databases. The combination of peptide mass fingerprinting and PSD and analysis described here generally leads to unambiguous protein identification in the amount of material range generally encountered in most proteome studies.     

Noise filtering techniques for electrospray quadrupole time of flight mass spectra

The sensitivity of protein identification by peptide sequencing using a nanoelectrospray ion source is limited by our ability to identify peptide ions in the mass spectrum. Their intensity must be higher than the chemical noise level to allow a rapid localization in the spectrum. Multiply-charged peptide ions on or below this level can only be found because their isotopic pattern is denser than that of the mostly singly-charged chemical background ions. However, to find peptides by looking for multiply-charged isotope clusters can be very timeconsuming and may lead to misassignments of the first isotope. Here we present a software-based method to increase the signal to noise ratio of ion signals in an electrospray spectrum. The software has two elements, one to reduce the noise level and a second to increase the intensity of ion peaks. Both methods together generate a spectrum in which the signal to noise ratio of ion signals is considerably improved. Peptide ions previously hidden in the chemical background are dismantled and can now be localized and selected for fragmentation. The method has been used successfully to identify low level proteins separated by one dimensional gel electrophoresis.     

Use of phage display methods to identify heptapeptide sequences for use as affinity purification 'tags' with novel chelating ligands in immobilized metal ion affinity chromatography

This study describes the screening of a peptide phage display library for amino acid sequences that bind with different affinities to a novel class of chelating ligands complexed with Ni2+ ions. These chelating ligands are based on the 1,4,7-triazacyclononane (TACN) structure and have been chosen to allow enhanced efficiency in protein capture and decreased propensity for metal ion leakage in the immobilized metal ion affinity chromatographic (IMAC) purification of recombinant proteins. Utilising high stringency screening conditions, various peptide sequences containing multiple histidine, tryptophan, and/or tyrosine residues were identified amongst the different phage peptide sequences isolated. The structures, and particularly the conserved locations of these key amino acid residues within the selected heptapeptides, form a basis to design specific peptide tags for use with these novel TACN ligands as a new mode of IMAC purification of recombinant proteins.     

Fmoc-POAC: [(9-fluorenylmethyloxycarbonyl)-2,2,5,5-tetramethylpyrrolidine-N-oxyl-3-amino-4-carboxylic acid]: a novel protected spin labeled beta-amino acid for peptide and protein chemistry

The stable free radical 2,2,6,6-tetramethylpiperidine-N-oxyl-4-amino-4-carboxylic acid (TOAC) is the only spin labeled amino acid that has been used to date to successfully label peptide sequences for structural studies. However, severe difficulty in coupling the subsequent amino acid has been the most serious shortcoming of this paramagnetic marker. This problem stems from the low nucleophilicity of TOAC's amine group towards the acylation reaction during peptide chain elongation. The present report introduces the alternative beta-amino acid 2,2,5,5-tetramethylpyrrolidine-N-oxyl-3-amino-4-carboxylic acid (POAC), potentially useful in peptide and protein chemistry. Investigations aimed at addressing the stereochemistry of this cyclic molecule through X-ray diffraction measurements of crystalline and bulk samples revealed that it consists only of the trans conformer. The 9-fluorenylmethyloxycarbonyl group (Fmoc) was chosen for temporary protection of the POAC amine function, allowing insertion of the probe at any position in a peptide sequence. The vasoactive octapeptide angiotensin II (All, DRVYIHPF) was synthesized by replacing Pro7 with POAC. The reaction of Fmoc-POAC with the peptidyl-resin occurred smoothly, and the coupling of the subsequent amino acid showed a much faster reaction when compared with TOAC. POAC7-AII was obtained in good yield, demonstrating that, in addition to TOAC, POAC is a convenient amino acid for the synthesis of spin labeled peptide analogues. The present findings open the possibility of a wide range of chemical and biological applications for this novel beta-amino acid derivative, including structural investigations involving its differentiated bend-inducing characteristics.     

A Multicomponent Conjugation Strategy to Unique N‐Steroidal Peptides: First Evidence of the Steroidal Nucleus as a β‐Turn Inducer in Acyclic Peptides

Constraining small peptides into specific secondary structures has been a major challenge in peptide ligand design. So far, the major solution for decreasing the conformational flexibility in small peptides has been cyclization. An alternative is the use of topological templates, which are able to induce and/or stabilize peptide secondary structures by means of covalent attachment to the peptide. Herein a multicomponent strategy and structural analysis of a new type of peptidosteroid architecture having the steroid as N‐substituent of an internal amide bond is reported. The approach comprises the one‐pot conjugation of two peptide chains (or amino acid derivatives) to aminosteroids by means of the Ugi reaction to give a unique family of N‐steroidal peptides. The conjugation efficiency of a variety of peptide sequences and steroidal amines, as well as their consecutive head‐to‐tail cyclization to produce chimeric cyclopeptide–steroid conjugates, that is, macrocyclic lipopeptides, was assessed. Determination of the three‐dimensional structure of an acyclic N‐steroidal peptide in solution proved that the bulky, rigid steroidal template is capable of both increasing significantly the conformational rigidity, even in a peptide sequence as short as five amino acid residues, and inducing a β‐turn secondary structure even in the all‐s‐trans isomer. This report provides the first evidence of the steroid skeleton as β‐turn inducer in linear peptide sequences.     

Construction of a protein-detection system using a loop peptide library with a fluorescence label

Construction of a novel protein-detection system was carried out using a designed peptide library with fluorescent labels based on loop structures. As a basic model study, detection of alpha-amylase using fluorescent-labeled peptides derived from an active loop of tendamistat was examined. The detection methods for proteins with immobilized peptides as well as peptides in solution have been successfully established. Based on these results, a loop peptide library that has various turn sequences grafted on a stable loop structure has been constructed. Various proteins with recognition patterns corresponding, for instance, to "protein fingerprints" could be detected using an immobilized peptide library. The present results suggest that the system can be applied to the development of a peptide microarray that behaves as a protein chip.     

Metal‐Helix Frameworks from Short Hybrid Peptide Foldamers

The potential of structured peptides has not been explored much in the design of metal‐organic frameworks (MOFs). This is partly due to the difficulties in obtaining stable secondary structures from the short α‐peptide sequences. Here we report the design, crystal conformations, coordination site dependent different silver coordinated frameworks of short α,γ‐hybrid peptide 12‐helices consisting of terminal pyridyl moieties and the utility of metal‐helix frameworks in the adsorption of CO₂. Upon silver ion coordination the 12‐helix terminated by the 3‐pyridyl derivatives adopted a 2:2 macrocyclic structure, while the 12‐helix terminated by the 4‐pyridyl derivatives displayed remarkable porous metal‐helix frameworks. Both head‐to‐tail intermolecular H‐bonds of the 12‐helix and metal ion coordination have played an important role in stabilizing the ordered metal‐helix frameworks. The studies described here open the door to design a new class of metal‐organic‐frameworks from peptide foldamers.     

Creating an Amyloid ‘Kaleidoscope’ Using Short Iodinated Peptides

Amyloid fibrils formed by peptides with different sequences exhibit diversified morphologies, material properties and activities, making them valuable for developing functional bionanomaterials. However, the molecular understanding underlying the structural diversity of peptide fibrillar assembly at atomic level is still lacking. In this study, by using cryogenic electron microscopy, we first revealed the structural basis underlying the highly reversible assembly of ¹GFGGNDNFG⁹ (referred to as hnRAC1) peptide fibril. Furthermore, by installing iodine at different sites of hnRAC1, we generated a collection of peptide fibrils with distinct thermostability. By determining the atomic structures of the iodinated fibrils, we discovered that iodination at different sites of the peptide facilitates the formation of diverse halogen bonds and triggers the assembly of entirely different structures of iodinated fibrils. Finally, based on this structural knowledge, we designed an iodinated peptide that assembles into new atomic structures of fibrils, exhibiting superior thermostability, that aligned with our design. Our work provides an in-depth understanding of the atomic-level processes underlying the formation of diverse peptide fibril structures, and paves the way for creating an amyloid “kaleidoscope” by employing various modifications and peptide sequences to fine-tune the atomic structure and properties of fibrillar nanostructures.