Study on the kinetics of keto-enol tautomerism of p-hydroxyphenylpyruvic acid using capillary electrophoresis

The kinetics of keto-enol tautomerism of p-hydroxyphenylpyruvic acid (pHPP) as a model of alpha-carbonyl compounds in aqueous solution at room temperature (25 degrees C) was first investigated by capillary electrophoresis with UV detection at 200 nm. The two tautomers could be separated and detected within 3 min. Since the ketonization of enolic pHPP varied with the buffer composition and buffer pH, the kinetics of pHPP was studied under different conditions, and relevant distributing fractions of enolic pHPP, ketonization rate constants and half-life were determined. In addition, beta-CD played an important part in the separation of the two tautomers, thus, the interaction between pHPP and beta-CD was also investigated by electrochemical techniques.     

The Influence of the Capping Agent on the Oxidation of Silver Nanoparticles: Nano‐impacts versus Stripping Voltammetry

The influence of capping agents on the oxidation of silver nanoparticles was studied by using the electrochemical techniques of anodic stripping voltammetry and anodic particle coulometry (“nano‐impacts”). Five spherical silver nanoparticles each with a different capping agent (branched polyethylenimine (BPEI), citrate, lipoic acid, polyethylene glycol (PEG) and polyvinylpyrrolidone (PVP)) were used to perform comparative experiments. In all cases, regardless of the capping agent, complete oxidation of the single nanoparticles was seen in anodic particle coulometry. The successful quantitative detection of the silver nanoparticle size displays the potential application of anodic particle coulometry for nanoparticle characterisation. In contrast, for anodic stripping voltammetry using nanoparticles drop casting, it was observed that the capping agent has a very significant effect on the extent of silver oxidation. All five samples gave a low oxidative charge corresponding to partial oxidation. It is concluded that the use of anodic stripping voltammetry to quantify nanoparticles is unreliable, and this is attributed to nanoparticle aggregation.     

Determination of hydroxylamine using a carbon paste electrode modified with graphene oxide nano sheets

A carbon paste electrode that was chemically modified with 3-(4'-amino-3'-hydroxy-biphenyl-4-yl)-acrylic acid (3,4-AA) was used as a selective electrochemical sensor for the detection of hydroxylamine. Cyclic voltammetry (CV), choronoamperometry (CHA) and square wave voltammetry (SWV) were used to investigate oxidation of hydroxylamine in aqueous solution. Under optimized concentration the electrocatalytic oxidation current peak for hydroxylamine increased linearly with concentration in the range of 0.025–10.0 μM. The detection limits for hydroxylamine was 0.012 μM. Finally, the modified electrode was applied to detection hydroxylamine in water samples.     

A facile electrochemical synthesis of caffeic acid derivatives in the presence of acetylacetone or methyl acetoacetate in aqueous medium

The anodic oxidation of caffeic acid in the presence of acetylacetone or methyl acetoacetate in aqueous solution has been studied by cyclic voltammetry and controlled-potential electrolysis techniques. The result showed that caffeic acid was oxidized to the corresponding o-benzoquinone, which underwent further Michael-addition with acetylacetone or methyl acetoacetate to produce caffeic acid derivative 3,4-dihydroxy-6-(1-acetylacetone)-yl cinnamic acid 4a or 3,4-dihydroxy-6-(1-acetyl-methylacetate)-yl cinnamic acid 4b.     

Renewable Pencil Electrodes for Highly Sensitive Anodic Stripping Voltammetric Determination of 3‐Hydroxyflavone and Morin in Bulk Form and in Biological Fluids

An electrochemical anodic adsorptive stripping procedure for ultra‐trace assay of 3‐hydroxyflavone (3HF) and Morin at a renewable pencil electrode (PGE) in bulk form and in biological fluids is described. The nature of the oxidation process of 3HF and Morin taking place at the PGE was characterized by cyclic voltammetry. The results show that the determination of the oxidation peak current is the basis of a simple, accurate and rapid method for quantification of 3HF by square‐wave anodic stripping voltammetry. Determination of Morin was achieved by square‐wave anodic adsorptive stripping voltammetry of the formed Morin? Cu(II) complex at a PGE. Factors influencing the trace measurements of 3HF and the Morin? Cu (II) complex at a PGE are assessed. The limits of detection and quantitation for the determination of 3HF and Morin in bulk form and in biological fluids were determined. The statistical analysis and the calibration curve data for trace determination of 3HF and Morin are reported.     

Aqueous Electrochemistry of Anthraquinone and Its Correlation with the Dissolved States of a Cationic Surfactant

Cyclic voltammetry was employed to study the electrochemical behavior of anthraquinone (AQ) in aqueous solution at a glassy carbon electrode using the sodium salt of anthraquinone-2-sulphonic acid (AQS). The cyclic voltammograms show a reduction wave and a corresponding oxidation wave. The electrochemical reaction of AQ in aqueous solution involves a two electron transfer process followed by a coupled chemical reaction and exhibits strong pH dependence at low pH (<4). A satellite peak is also observed at the cathodic side of the reduction wave for the reduction of the sulfonate group of AQS. The electrochemical investigation was also carried out in the presence of a cationic surfactant, cetyltrimethylammonium bromide (CTAB). Similar redox behavior can be observed for the electrochemical reaction of AQS in the presence of CTAB solutions similar to the aqueous media. The electrochemical responses have been found to depend on the dissolved states of the surfactant. The current-potential behavior of AQS depends on the concentration of CTAB and micellization has a profound effect on the electrochemical behavior of AQ.     

Electrode processes in the oxidation of tetrahydroisoquinoline derivatives

The electrochemical oxidation of the alkaloid laudanosine (Ia) to O-methylflavinantine (II) has been studied in acetonitrile solvent. Using cyclic voltammetry, rotating disc voltammetry and preparative electrolyses on several alkaloids, simple aliphatic amines and aromatic compounds, some aspects of the mechanism of this coupling reaction are elucidated. The first anodic wave for laudanosine at platinum has E_p=0.55 V vs. Ag/Ag⁺. The electrode rapidly becomes partially passivated at potentials above 0.5 V. This is due to a film which “dissolves” below 0.5 V, at a rate independent of the potential. It is shown that the reaction (Ia)→(II) proceeds at 0.5 V by initial oxidation of the amine moiety. If acids such as sodium bicarbonate are added to the anolyte the amine is protonated causing the first wave to disappear. Oxidation at 1.1 V under these acidic conditions produces the same product, but more rapidly and in significantly higher yield because electrode filming and side reactions resulting from the amine oxidation are abrogated.     

高碳铬铁在氢氧化钠水溶液中电化学氧化过程

铬铁电化学氧化法是一种新的制备铬酸钠的方法,然而高碳铬铁在NaOH水溶液中的电化学氧化过程尚不明确。 采用循环伏安法(CV)、稳态极化法(LSV)等电化学测试方法对金属铬、高碳铬铁在NaOH水溶液中的电化学氧化过程进行研究,通过扫描电子显微镜(SEM)、能量散射谱(EDS)和X射线光电子能谱(XPS)对高碳铬铁电解后固相产物表征,判断固相产物的组成。 结果表明,高碳铬铁不同于金属铬的电氧化过程,它在NaOH溶液中通过Cr(0)→Cr(Ⅵ)的电氧化方式生成铬酸钠,中间产物Cr(OH)₃和Fe(0)发生电化学反应生成稳定的FeCr₂O₄。 随着NaOH浓度的增加,电势较低时,受高碳铬铁中Fe(0)的影响,高碳铬铁容易在NaOH水溶液中发生钝化;当电势足够正时,钝化膜溶解,生成铬酸钠、氢氧化铁和亚铬酸亚铁,同时,阳极表面有氧气析出。 高碳铬铁电化学氧化制备铬酸钠的适宜条件:碱浓度≥2 mol/L,阳极电势≥1.6 V(vs.SCE)。     

Voltammetric Oxidation of Drugs of Abuse III. Heroin and Metabolites

The oxidative behavior of heroin in aqueous solution is reported. In order to identify its oxidation peaks, several metabolites, 6‐monoacetylmorphine, 3‐monoacetylmorphine and norheroin, were synthesized and their electrochemical behavior studied using differential pulse voltammetry. The anodic waves observed for heroin correspond to the oxidation of the tertiary amine group and its follow‐up product (secondary amine), and to the oxidation of the phenolic group obtained from hydrolysis, at alkaline pHs, of the 3‐acetyl group. The results enabled a new oxidative mechanism for heroin to be proposed in which a secondary amine, norheroin, and an aldehyde are obtained. The voltammetric behavior of 6‐monoacetylmorphine and morphine was found to be similar demonstrating that the presence of an acetyl substituent on the 6‐hydroxy group does not have a relevant influence on the peak potential of the wave resulting from oxidation of the 3‐phenolic group.     

Mechanism of oxidation of 1-benzyl-1,4-dihydronicotinamide by the biologically active p-benzoquinone derivative, avarone, in a cationic micellar medium: An electrochemical approach

The electrochemical reduction of avarone (Q), an antitumor sesquiterpenoid quinone, was investigated at various pH in aqueous ethanol containing a cationic surfactant, cetyltrimethylammonium bromide (CTAB) by cyclic and rotating disc electrode voltammetry, using a glassy carbon electrode. Comparison of the electrochemical reduction of Q in presence of CTAB with the same process in a homogeneous water + ethanol solution shows an anodic shift of the reduction potential in the presence of CTAB; at pH > 9.5 and in presence of CTAB, two well-defined reduction peaks are observed, thus confirming one-electron reduction of Q, whereby the intermediate radical-anion is stabilized by the cationic micellar medium. The electrochemical oxidation of BNAH was investigated by cyclic voltammetry, and the anodic shift of the peak potential in presence of CTAB was observed. From the electrochemical behaviour of Q and BNAH, and the kinetics of the oxidation of BNAH with Q, it is suggested that the reaction takes place in two successive one-electron transfer steps. The application of the Marcus theory gives additional proof that, in this case, the first electron transfer is the rate determining step.     

Anodic behaviour of the (222) macrobicyclic ligand on mercury electrode in propylenecarbonate

The anodic behaviour of the free macrobicyclic ligand (222) was examined by various electrochemical techniques on mercury and on platinum electrodes. From results on platinum electrode using cyclic voltammetry it appears that the anodic oxidation of (222) proceeds irreversibly at potentials more positive than +0.7 V (aq. SCE), however, its mechanism could not be determined because the anodic signal was not well developed. Under polarographic conditions a reversible anodic diffusion controlled wave at E_1/2=+0.08 V (aq. SCE) was observed, corresponding to a complex formation of the ligand (222) with the ions of mercury formed by anodic polarization of mercury electrode. In excess of mercuric cations a cathodic wave at slightly more positive potentals was found.     

Tautomerization equilibria in aqueous micellar solutions: a spectrophotometric and factor-analytical study

The keto-enol equilibria of benzoylacetone (BZA) as a model for 1,3-dicarbonyl compounds are studied in aqueous acid and cationic micellar solution. Evolving factor analysis (EFA), multivariate curve resolution-alternating least-squares (MCR-ALS), and rank annihilation factor analysis (RAFA) are used for complete resolving of measured spectrophotometric data. The acidity constants of the enolic, KaE, and ketonic, KaK, forms of BZA and also the tautomerization constant, Kt, and its related thermodynamic parameters have been determined by using EFA and MCR-ALS methods and spectral variation of BZA solutions in various pHs and temperatures. The concentration and spectral profiles of all species were calculated without any assumption about chemical models. The spectral variation of BZA solutions as a function of cationic micelle concentration sufficiently beyond its critical micelle concentration is analyzed according to the partition model for distribution between water and micellar pseudo-phase and RAFA. The outputs of using RAFA on measured rank deficient data are the spectrum of enolic form in the micellar pseudo-phase, free from contribution of the enolic form in the aqueous phase, the partition coefficient of enolic form, KdE, between the micelle and water phases, and the tautomerization constant in the micellar pseudo-phase, Ktm.     

酸性介质中碘离子在铂电极上的电化学氧化行为

采用循环伏安法研究了酸性介质中碘离子在铂电极上不同电位区间, 不同酸度下的电化学反应行为. 结果表明, 当极化电位较低(小于0.6 V(vs Hg/Hg2SO4))时, 碘离子在铂电极上发生2I--2e→I2电氧化反应, 反应产物通过I2+I-=I-3被进一步溶解, 整个反应属于E-C(electrochemical-chemical)模式. 电氧化过程中可以形成碘膜, 其也可以被碘离子溶解. 当极化电位升高至0.6 V(vs Hg/Hg2SO4)或以上时, 碘离子会直接电氧化为高价态碘化合物, I-+3H2O→IO-3+6H++6e, 而析出的碘膜并不发生再氧化反应; 在电化学还原过程中, 出现了两个还原峰, 分别对应于I2、I-3的还原反应; 在无碘膜时, 碘离子电氧化过程受溶液中碘离子的液相扩散步骤控制; 碘膜形成后, 主要受碘膜中碘离子的固相扩散控制; 酸度对于碘离子的电化学氧化过程有很大的影响, 其线性极化曲线的起峰电位及电流峰值电位均随酸浓度升高而负移.     

Electrochemical Detection of Guanine‐methylation Using Glassy Carbon Electrode

This work presents a study of the electrochemical oxidation of 7‐methylguanine (7‐mGua) in aqueous solution at glassy carbon electrode by cyclic voltammetry, differential pulse voltammetry, square wave voltammetry and electrochemical impedance spectrometry. The anodic behaviour of 7‐mGua was compared with the electro‐oxidation of guanine and 7‐methylguanosine. The results demonstrated that the methyl and ribose groups are not electroactive but strongly influence the oxidation mechanism of these species. The oxidation of 7‐mGua occurred in a single pH‐dependent step, with the withdrawal of two electrons and two protons of C8, to form 8‐oxo‐7‐methylguanine, while the electro‐oxidation of 7‐methylguanosine also occurred in a single pH‐dependent step, however, with the withdrawal of one electron and one proton of C8 to form a hydroxylated product, since its oxidation to 8‐oxo‐7‐methylguanosine is hindered by the presence of the pendant groups. In addition, the oxidation of 7‐mGua was investigated in the presence of DNA and DNA‐bases, leading to the conclusion that the formation of 7‐mGua, from an interaction of DNA with an alkylating agent, would cause an increase on the deoxyguanosine peak current of the DNA‐biosensor, with no interference of any free DNA bases, which demonstrated that DNA‐electrochemical biosensors find application on detecting DNA methylation, opening a new avenue for applications of DNA biosensors.     

Sulfite induced autoxidation of NiII and CoII tetraglycine complexes. Spectrophotometric and rotating ring-disc voltammetric studies

The oxidation of Ni(II) and Co(II) tetraglycine complexes in borate buffer aqueous solution, by dissolved oxygen, is strongly accelerated by sulfite. The formation of Ni(III) and Co(III) complexes with maximum absorbances at 327 and 265 nm, respectively, was followed by spectrophotometric measurements. Ni(III) formation was also characterized by voltammetry at low temperatures, whose anodic and cathodic components were observed in the recorded voltammograms. Spectra and rotating ring-disc voltammograms, recorded at various rotation speed values, showed that the Ni(III) species decomposes. The electrochemical process related to the couple Co(II)/Co(III), in a medium containing tetraglycine, was not reversible. In both Ni(II) and Co(II) complexes the metal ion oxidation in the presence of oxygen and sulfite involves the reduction of some initial Ni(III) or Co(III) by sulfite to produce the SO(3).- radical, which rapidly reacts with dissolved oxygen to produce SO(5).-, which then oxidizes Ni(II) or Co(II).     

水相中5-（嘌呤-6-巯基）邻苯二酚衍生物的电化学合成

本文报道了6-巯基嘌呤存在时在水相中通过阳极氧化邻苯二酚来电化学合成5-(嘌呤-6-巯基)邻苯二酚衍生物。循环伏安法和控制电位电解的结果表明该类化合物的形成为EC过程,即邻苯二酚衍生物原料先是被电化学氧化成对应的邻苯醌衍生物,该醌非常活泼,进一步与6-巯基嘌呤发生迈克尔加成反应,原位转化生成化合物3a-3d。该工作进一步证明了水相中邻苯醌衍生物的电化学合成与原位转化是合成邻苯二酚衍生物的重要方法。     

Electrochemical Impedance Characterization of Nafion‐Coated Carbon Film Resistor Electrodes for Electroanalysis

Carbon film disk electrodes with Nafion coatings have been characterized by electrochemical impedance spectroscopy (EIS) with a view to a better understanding of their advantages and limitations in electroanalysis, particularly in anodic stripping voltammetry of metal ions. After initial examination by cyclic voltammetry, spectra were recorded over the full potential range in acetate buffer solution at the bare electrodes, electrodes electrochemically pretreated in acid solution, and Nafion‐coated pretreated electrodes in the presence and absence of dissolved oxygen. EIS equivalent circuit analysis clearly demonstrated the changes between these electrode assemblies. In order to simulate anodic stripping voltammetry conditions, spectra were also obtained in the presence of cadmium and lead ions in solution at Nafion‐coated electrodes, both after metal ion deposition and following re‐oxidation. Permanent changes to the structure of the Nafion film occurred, which has implications for use of these electrode assemblies in anodic stripping voltammetry at relatively high trace metal ion concentrations.     

Electrochemical study of quercetin-DNA interactions: part I. Analysis in incubated solutions

The present study aims to investigate the quercetin-deoxyribonucleic acid (DNA) interaction occurring in bulk solution either electrochemically using differential pulse voltammetry or spectrophotometrically, in order to explain the possible DNA-damaging activity of quercetin. A very weak interaction between quercetin and DNA in solution was found to take place. However, since extensive quercetin-induced DNA damage via reaction with Cu(II) has been reported, an electrochemical study of the DNA-Cu(II)-quercetin system in solution was undertaken. The product of DNA interaction with quercetin-Cu(II) complex was observed. Damages to DNA were electrochemically recognized via the increasing of the anodic peaks corresponding to the oxidation of guanosine and adenosine bases and spectrophotometrically via increasing of the 260 nm adsorption band. It was also observed that dsDNA damage produced by the quercetin-Cu(II) complex occurred with time. Control experiments with different mixtures of Cu(II), quercetin, ssDNA, dsDNA or poly[A] were carried out in order to establish a possible mechanism of interaction between DNA and quercetin via Cu(II).     

Electrochemical synthesis of new benzodifurans

Electrochemical oxidation of catechol (1a) and 3-methyl-catechol (1b) has been studied in the presence of chloranilic acid (3) as a nucleophile in aqueous solution using cyclic voltammetry and controlled-potential coulometry. In this work, we proposed a novel mechanism for the electrode process and derived variety of products with good yield and purity using controlled-potential electrochemical oxidation at a graphite electrode in a two compartment cell.     

An Electrochemical Puzzle: The Catalyzed Anodic Dissolution of I-coated Palladium in Halide-Free Acid Solutions

Iodine adsorbed on a Pd electrode has been shown to catalyze the anodic dissolution of Pd in halide-free acidic solutions. An undergraduate instrumental analysis laboratory experiment has been developed that enables students to use basic electrochemical techniques (cyclic voltammetry and chronocoulometry) to detect and confirm this phenomenon. Cyclic voltammograms of clean Pd and I-coated Pd were done in 0.5 M sulfuric acid solutions containing iodide and iodine as well as halide free 0.5 M sulfuric acid. The large currents noted in the halide-free solution indicate an anodic process that is not related to the oxidation process in solutions containing iodine species. Chronocoulometry was used to determine the total charge that was passed in the 0.5 M sulfuric acid solutions for clean and I-coated Pd electrodes. The results of these experiments point to a unique catalyzed corrosion process for this otherwise inert metal.