Growth of highly-oriented CaCu3Ti4O12 thin films on SrTiO3 (1 0 0) substrates by a chemical solution route

Highly-oriented CaCu₃Ti₄O₁₂ (CCTO) thin films deposited directly on SrTiO₃ (1 0 0) substrates have been developed successfully using a chemical solution coating method. X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM) were employed to characterize the structure and the morphology. It was observed that the CCTO thin films had the 1 μm × 1 μm domain-like microstructure that consists of compact grains of about 0.1 μm in size. The cross sectional SEM image shows that the CCTO grains grow regularly close to the clear interface between the CCTO film and the SrTiO₃ substrate. The result was discussed in terms of lattice mismatch between CCTO and SrTiO₃.     

Dependence of the microstructural properties on the substrate temperature in strained CdTe (1 0 0)/GaAs (1 0 0) heterostructures

CdTe thin films were grown on GaAs (1 0 0) substrates by using molecular beam epitaxy at various temperatures. The bright-field transmission electron microscopy (TEM) images and the high-resolution TEM (HRTEM) images showed that the crystallinity of CdTe epilayers grown on GaAs substrates was improved by increasing the substrate temperature. The result of selected-area electron diffraction pattern (SADP) showed that the orientation of the grown CdTe thin films was the (1 0 0) orientation. The lattice constant the strain, and the stress of the CdTe thin film grown on the GaAs substrate were determined from the SADP result. Based on the SADP and HRTEM results, a possible atomic arrangement for the CdTe/GaAs heterostructure is presented.     

Growth of thin Fe(0 0 1) films for terahertz emission experiments

The electrical and magnetic properties of thin iron (Fe) films have sparked significant scientific interest. Our interest, however, is in the fundamental interactions between light and matter. We have discovered a novel application for thin Fe films. These films are sources of terahertz (THz) radiation when stimulated by an incident laser pulse. After intense femtosecond pulse excitation by a Ti:sapphire laser, these films emit picosecond, broadband THz frequencies. The terahertz emission provides a direct measure of the induced ultrafast change in magnetization within the Fe film. The THz generation experiments and the growth of appropriate thin Fe films for these experiments are discussed. Several criteria are used to select the substrate and film growth conditions, including that the substrate must permit the epitaxial growth of a continuous, monocrystalline or single crystal film, yet must also be transparent to the emitted THz radiation. An Fe(0 0 1) film grown on the (0 0 1) surface of a magnesium oxide (MgO) substrate makes an ideal sample. The Fe films are grown by physical vapor deposition (PVD) in an ultrahigh vacuum (UHV) system. Low energy electron diffraction (LEED) and Auger electron spectroscopy (AES) are used to characterize the Fe(0 0 1) films. Two substrate surface preparation methods are investigated. Fe(0 0 1) films grown on MgO(0 0 1) substrates that are used as-received and films grown on MgO(0 0 1) substrates that have been UV/ozone-cleaned ex vacuo and annealed in vacuo produce the same results in the THz generation experiments. Either substrate preparation method permits the growth of samples suitable for the THz emission experiments.     

Morphology of pentacene films deposited on Cu(1 1 9) vicinal surface

We investigate the morphology of a pentacene (C₂₂H₁₄) film adsorbed on the Cu(1 1 9) vicinal surface by scanning tunnelling microscopy (STM). Thermal treatment of a thick film of molecules generates a long-range ordered structure. Series of molecular rows are alternated with areas where the molecules assume two equivalent orientations. STM data analysis suggests that the ordered structure can be described by a rippled morphology. The behaviour of the film at different annealing temperatures suggests a possible explanation of the film structure as due to an adsorbate-induced modification of the substrate.     

Growth of oriented crystalline Ag nanoislands on air-exposed Si(0 0 1) surfaces

Growth of Ag islands under ultrahigh vacuum condition on air-exposed Si(0 0 1)-(2 × 1) surfaces has been investigated by in-situ reflection high energy electron diffraction (RHEED). A thin oxide is formed on Si via exposure of the clean Si(0 0 1)-(2 × 1) surface to air. Deposition of Ag on this oxidized surface was carried out at different substrate temperatures. Deposition at room temperature leads to the growth of randomly oriented Ag islands while well-oriented Ag islands, with (0 0 1)_Ag||(0 0 1)_Si, [1 1 0]_Ag||[1 1 0]_Si, have been found to grow at substrate temperatures of ≥350 °C in spite of the presence of the oxide layer between Ag islands and Si. The RHEED patterns show similarities with the case of Ag deposition on H-passivated Si(0 0 1) surfaces.     

Self-limited growth of Si on B atomic-layer formed Ge(1 0 0) by ultraclean low-pressure CVD system

Utilizing BCl₃ reaction on Ge(1 0 0) and subsequent Si epitaxial growth by SiH₄ reaction at 300 °C, B atomic-layer doping in Si/Ge(1 0 0) heterostructure was investigated. Cl atoms on the B atomic-layer formed Ge(1 0 0) scarcely affect upon the SiH₄ reaction. It is also found that Si atom amount deposited by SiH₄ reaction on Ge(1 0 0) is effectively enhanced by the existence of B atomic layer and the deposition rate tends to decrease at around 2-3 atomic layers which is three times larger than that in the case without B. The results of angle-resolved X-ray photoelectron spectroscopy show that most B atoms are incorporated at the heterointerface between the Si and Ge.     

Molecular dynamics investigation of deposition and annealing behaviors of Cu atoms onto Cu(0 0 1) substrate

The deposition growth and annealing behaviors of Cu atoms onto Cu(0 0 1) are investigated in atomic scale by molecular dynamics (MD) simulation. The results indicate that the film grows approximately in a layer-island mode as the incident energy is from 1 to 5 eV, while surface intermixing can be significantly observed at 10 eV. The surface roughness of the film decreases with increasing the incident energy, and the film after annealing becomes smoother and more ordered. These phenomena may be attributed to the enhanced atomic mobility for higher incident energy and thermal annealing. It also indicates that atomic mixing is more significant with increasing both the incident energy and substrate temperature. In addition, the peak-to-peak distances of radial distribution function (RDF) clearly indicate that the films before and after annealing are still fcc structure except for that at the melting temperature of 1375.6 K. After annealing, the film at the melting temperature returns to fcc structure instead of amorphous. Moreover, the residual stress and Poisson ratio of the film are remarkably affected by the thermal annealing. Furthermore, the density of thin film is obviously affected by the substrate temperature and annealing process. Therefore, one can conclude that high incident energy, substrate temperature and thermal annealing could help to enhance the surface morphology and promote the microstructure of the film.     

Half Ca-doped LaMnO3 films on (0 0 1) SLAO and STO substrate studied by magnetization and transport measurements

In this study, La_0.5Ca_0.5MnO₃ (LCMO) films, at the boundary between ferromagnetic metallic and charge-ordered antiferromagnetic insulator according to the bulk phase diagram, were epitaxially grown on (0 0 1) SrTiO₃ (STO) and SrLaAlO₄ (SLAO) substrates by pulsed laser deposition technique. The films were analyzed by X-ray diffraction, magnetization and magnetoresistance measurements. A considerably higher magnetization was measured for 290-nm-thick film on SLAO substrate compared to the film on STO substrate, although both films have the same chemical composition, thickness and epitaxial orientation. The film on SLAO shows a metal-insulator (MI) transition, which occurs at higher temperatures with increasing applied magnetic field, whereas only insulating behavior was observed for the 290-nm-thick film on STO except for the highest applied magnetic field (7 T). In addition, transport measurements were performed and analyzed by Mott's variable range hopping (VRH) model to correlate the resistivity of the films with the Jahn-Teller strain (ε_J−T) in the structure.     

Theoretical study of Ti and Fe surface alloys on Al(0 0 1) substrate

Accurate density-functional calculations are performed to investigate the formation of Ti and Fe ultrathin alloys on Al(0 0 1) surface. It is demonstrated that a deposition of Ti monolayer on Al(0 0 1) substrate leads to the formation of Al₃Ti surface alloy with Ti atoms arranged according to the L1₂ stacking, distinct from the D0₂₂ structure characteristic of a bulk Al₃Ti compound. A quest for the reason of this distinct atomic arrangement led us to the study of the surface structure of Al₃Ti(0 0 1) compound. It is concluded that even the Al₃Ti(0 0 1) surface is terminated with three layers assuming a L1₂ stacking and hence this stacking fault can be classified as a surface-induced stacking fault. Several possibilities of Fe atoms distributed in the surface region of Al(0 0 1) have been examined. The most stable configuration is the one with the compact Fe monolayer on Al(0 0 1) and covered by one Al monolayer. Lastly, our calculations show that there is no barrier for the penetration of Fe adatoms below the Al(0 0 1) surface; however, such a barrier is present for a Ti-alloyed Al(0 0 1) surface.     

Effect of modification of S-terminated Ge(1 0 0) surface on ALD HfO2 gate stack

When S-termination on a Ge(1 0 0) surface was desorbed at an elevated temperature and an atomic layer deposition (ALD) HfO₂ film was deposited, interfacial thickness was less than 1 nm. As a result, the equivalent oxide thickness (EOT) of the stack on the initially S-terminated surface was thinner than that deposited on the O₃-oxidized surface, while HfO₂ film thickness was almost identical on both surfaces. Nevertheless, the HfO₂ stack on the initially S-terminated surface exhibited improved leakage current characteristics due to an increase in barrier height. Its thinner but robust interface will contribute to the scaling down of gate oxide integrity.     

Epitaxial growth and structural characterization of Pb(Fe1/2Nb1/2)O3 thin films

We have grown lead iron niobate thin films with composition Pb(Fe_1/2Nb_1/2)O₃ (PFN) on (0 0 1) SrTiO₃ substrates by pulsed laser deposition. The influence of the deposition conditions on the phase purity was studied. Due to similar thermodynamic stability spaces, a pyrochlore phase often coexists with the PFN perovskite phase. By optimizing the kinetic parameters, we succeeded in identifying a deposition window which resulted in epitaxial perovskite-phase PFN thin films with no identifiable trace of impurity phases appearing in the X-ray diffractograms. PFN films having thicknesses between 20 and 200 nm were smooth and epitaxially oriented with the substrate and as demonstrated by RHEED streaks which were aligned with the substrate axes. X-ray diffraction showed that the films were completely c-axis oriented and of excellent crystalline quality with low mosaicity (X-ray rocking curve FWHM?0.09°). The surface roughness of thin films was also investigated by atomic force microscopy. The root-mean-square roughness varies between 0.9 nm for 50-nm-thick films to 16 nm for 100-nm-thick films. We also observe a correlation between grain size, surface roughness and film thickness.     

Epitaxially grown ZnO thin films on 6H-SiC(0 0 0 1) substrates prepared by spin coating-pyrolysis

Epitaxially grown ZnO thin film on 6H-SiC(0 0 0 1) substrate was prepared by using a spin coating-pyrolysis with a zinc naphthenate precursor. As-deposited film was pyrolyzed at 500 °C for 10 min in air and finally annealed at 800 °C for 30 min in air. In-plane alignment of the film was investigated by X-ray pole-figure analysis. Field emission-scanning electron microscope, scanning probe microscope, and He-Cd laser (325 nm) was used to analyze the surface morphology, the surface roughness and photoluminescence of the films. In the photoluminescence spectra, near-band-edge emission with a broad deep-level emission was observed. The position of the near-band-edge peak was around 3.27 eV.     

Growth process of β-FeSi2 epitaxial film on Si(1 1 1) by molecular beam epitaxy

We have reported a one step growth of a high quality β-FeSi₂ epitaxial film on hydrogen terminated Si(1 1 1) by using molecular beam epitaxy (MBE) without template layer or post-growth annealing. In the present work, the growth process was studied by analyzing X-ray diffraction (XRD) spectra, reflective high energy electron diffraction (RHEED) and atomic force microscopy (AFM) observations on the samples grown with different growth times from 10 s to 1 h. A phase transformation from γ-FeSi₂ to β-FeSi₂ was confirmed existing in the crystal film growth, as well as the growth mode changing from three-dimensional (3D) to two-dimensional (2D) mode.     

SrTiO3(0 0 1) reconstructions: the (2 × 2) to c(4 × 4) transition

Scanning tunneling microscopy (STM) is used to investigate the (0 0 1) surface structure of Nb doped SrTiO₃ single crystals annealed in ultra high vacuum (UHV). Atomically resolved images of the (2 × 2) reconstructed surface are obtained after annealing a chemically etched sample. With further annealing dotted row domains appear, which coexist with the (2 × 2) reconstruction. The expansion of these domains with further annealing gives rise to the formation of a TiO₂ enriched c(4 × 4) reconstruction.     

An in situ transport measurement of interfaces between SrTiO3(1 0 0) surface and an amorphous wide-gap insulator

We have explored the transport properties of the interface between a SrTiO₃(1 0 0) single crystal and a CaHfO₃ wide-gap insulator layer deposited by pulsed laser deposition. The electrical transport measurements were done in situ during the heterojunction fabrication and consistently showed an enhancement of interface conductivity. A conducting interface was always obtained, independent of deposition parameters (laser pulse rate, laser fluence, oxygen pressure, and substrate termination). The conduction was attributed to plume-induced photocurrent in SrTiO₃. The current decay rate after insulator film fabrication was strongly influenced by substrate termination. An exponential relaxation-type photocurrent decay was clearly seen on SrO-termination, whereas a nearly constant conductivity was seen for up to 24 h on TiO₂-terminated surfaces.     

Structural and magnetic properties of evaporated Fe thin films on Si(1 1 1), Si(1 0 0) and glass substrates

We present experimental results on the structural and magnetic properties of series of Fe thin films evaporated onto Si(1 1 1), Si(1 0 0) and glass substrates. The Fe thickness, t, ranges from 6 to110 nm. X-ray diffraction (XRD) and atomic force microscopy (AFM) have been used to study the structure and surface morphology of these films. The magnetic properties were investigated by means of the Brillouin light scattering (BLS) and magnetic force microscopy (MFM) techniques. The Fe films grow with (1 1 0) texture; as t increases, this (1 1 0) texture becomes weaker for Fe/Si, while for Fe/glass, the texture changes from (1 1 0) to (2 1 1). Grains are larger in Fe/Si than in Fe/glass. The effective magnetization, 4πM_eff, inferred from BLS was found to be lower than the 4πM_S bulk value. Stress induced anisotropy might be in part responsible for this difference. MFM images reveal stripe domain structure for the 110 nm thick Fe/Si(1 0 0) only.     

Solid phase epitaxy of Ge films on CaF2/Si(1 1 1)

At room temperature deposited Ge films (thickness < 3 nm) homogeneously wet CaF₂/Si(1 1 1). The films are crystalline but exhibit granular structure. The grain size decreases with increasing film thickness. The quality of the homogeneous films is improved by annealing up to 200 °C. Ge films break up into islands if higher annealing temperatures are used as demonstrated combining spot profile analysis low energy electron diffraction (SPA-LEED) with auger electron spectroscopy (AES). Annealing up to 600 °C reduces the lateral size of the Ge islands while the surface fraction covered by Ge islands is constant. The CaF₂ film is decomposed if higher annealing temperatures are used. This effect is probably due to the formation of GeF_x complexes which desorb at these temperatures.     

Epitaxial growth of Co(0 0 0 1)hcp/Fe(1 1 0)bcc magnetic bi-layer films on SrTiO3(1 1 1) substrates

Co(0 0 0 1)_hcp/Fe(1 1 0)_bcc epitaxial magnetic bi-layer films were successfully prepared on SrTiO₃(1 1 1) substrates. The crystallographic properties of Co/Fe epitaxial magnetic bi-layer films were investigated. Fe(1 1 0)_bcc soft magnetic layer grew epitaxially on SrTiO₃(1 1 1) substrate with two type variants, Nishiyama–Wasserman and Kurdjumov–Sachs relationships. An hcp-Co single-crystal layer is obtained on Ru(0 0 0 1)_hcp interlayer, while hcp-Co layer formed on Au(1 1 1)_fcc or Ag(1 1 1)_fcc interlayer is strained and may involve fcc-Co phase. It has been shown possible to prepare Co/Fe epitaxial magnetic bi-layer films which can be usable for patterned media application.     

Heavy atomic-layer doping of B in low-temperature Si epitaxial growth on Si(1 0 0) by ultraclean low-pressure chemical vapor deposition

Electrical characteristics of B atomic-layer doped Si epitaxial films on Si(1 0 0) formed by B atomic-layer formation on Si(1 0 0) at 180 °C and subsequent capping Si deposition at 500 °C using ultraclean low-pressure chemical vapor deposition were investigated. From evaluation results of carrier concentration in the films, by low-temperature SiH₄ exposure at 180-300 °C before the capping Si deposition at 500 °C, 70% improvement of B electrical activity was confirmed, and it is suggested that lowering the temperatures for B atomic-layer formation on Si(1 0 0) as well as SiH₄ exposure before the capping Si deposition is effective to suppress B clustering and to achieve B atomic-layer doped Si films with extremely high carrier concentration.     

Theoretical investigation on structural stability of InN thin films on 3C-SiC(0 0 1)

The structural stability of InN thin films on 3C-SiC(0 0 1) substrate is systematically investigated based on an empirical interatomic potential, which incorporates electrostatic energy due to covalent bond charges and ionic charges. The calculated energy differences among coherently grown 3C-InN(0 0 1), 3C-InN(0 0 1) with misfit dislocations (MDs), and 2H-InN(0 0 0 1) imply that the coherently grown 3C-InN(0 0 1) is stable when the film thickness is less than 7 monolayers (MLs) while 2H-InN(0 0 0 1) is stabilized for the thickness beyond 8 MLs. This is because InN layers in 2H-InN(0 0 0 1) are fully relaxed by one MD. The analysis of atomic configuration at the 3C-InN(0 0 1)/3C-SiC(0 0 1) interfaces reveals that the coordination number of interfacial atoms is quite different from that in the bulk region. Thus, 3C-InN(0 0 1) with MDs on 3C-SiC(0 0 1) is always metastable over entire range of film thickness, consistent with the successful fabrication of 2H-InN(0 0 0 1) on 3C-SiC(0 0 1) by the molecular beam epitaxy. These results suggest that the mismatch in atomic arrangements at the interface crucially affects the structural stability of InN thin films on 3C-SiC(0 0 1) substrate.