Transport phenomenon as a function of counter and co-ions in solution: chronopotentiometric behavior of anion exchange membrane in different aqueous electrolyte solutions

Anion exchange membrane has been investigated in different electrolyte solutions by chronopotentiometry to explore the influence of co-ion and counterion of the exchange group of the membrane, on the transport phenomena. Chloride, nitrate, sulfate and acetate in sodium salts were used as counterions and sodium, potassium, calcium and ammonium in chloride salts were used as co-ions. The membrane showed a potential drop (E₀) in all these electrolytes when a constant current was applied across it, which remained constant for a period less than τ, called the transition time and rose gradually to a maximum (E_max) value. The parameters such as τ, E₀ and E_max and the potential jump (ΔE) and τ and the inflection zone (Δt) along the time axis have been measured and compared at an applied current density (I) of 10 mA cm⁻² in 10 mM solutions. The values of τ^1/2/z_A[A₀] or τ^1/2/z_C[C₀], with or , E₀ and ΔE with or (where r_A and r_C are the ionic radii of counter and co-ions, respectively) have been correlated. Permselectivity (P) and transference number of the membrane with respect to each one of the above electrolytes have been evaluated and discussed.     

Structural and spectroscopic properties of Hexamethylenetetramine cobalt(II) complex: [Co(NCS)2(hmt)2(H2O)2][Co(NCS)2(H2O)4] (H2O)

Synthesis, structure, spectroscopy and thermal properties of complex [Co(NCS)₂(hmt)₂(H₂O)₂][Co(NCS)₂(H₂O)₄] (H₂O) (I), assembled by hexamethylenetetramine and octahedral Co(II) metal ions, are reported. Crystal data for I: F_w 387.34, a=9.020(8), b=12.887(9), c=7.95(1) Å, =96.73(4), β=115.36(5), γ=94.16(4)°, V=820(1) Å³, Z=2, space group=P−1, T=173 K, λ(Mo-K)=0.71070 Å, ρ_calc=1.718567 g cm⁻³, μ=17.44 cm⁻¹, R=0.088, R_w=0.148. An interesting two-dimensional network is assembled via hydrogen bonds through coordinated and free water molecules. The d–d transition energy levels of Co(II) ion are determined by UV–vis spectroscopy and calculated by ligand field theory. The calculated results agree well with experiment ones.     

Syntheses and structural determination of nine-coordinate K3[Nd(nta)2(H2O)]·6H2O and K3[Er(nta)2(H2O)]·5H2O

The syntheses and structural determination of Nd^III and Er^III complexes with nitrilotriacetic acid (nta) were reported in this paper. Their crystal and molecular structures and compositions were determined by single-crystal X-ray structure analyses and elemental analyses, respectively. The crystal of K₃[Nd^III(nta)₂(H₂O)]·6H₂O complex belongs to monoclinic crystal system and C2/c space group. The crystal data are as follows: a=1.5490(11) nm, b=1.3028(9) nm, c=2.6237(18) nm, β=96.803(10)°, V=5.257(6) nm³, Z=8, M=763.89, D_c=1.930 g cm⁻³, μ=2.535 mm⁻¹ and F(000)=3048. The final R₁ and wR₁ are 0.0390 and 0.0703 for 4501 (I>2σ(I)) unique reflections, R₂ and wR₂ are 0.0758 and 0.0783 for all 10474 reflections, respectively. The Nd^IIIN₂O₇ part in the [Nd^III(nta)₂(H₂O)]³⁻ complex anion has a pseudo-monocapped square antiprismatic nine-coordinate structure in which the eight coordinate atoms (two N and six O) are from the two nta ligands and a water molecule coordinate to the central Nd^III ion directly. The crystal of the K₃[Er^III(nta)₂(H₂O)]·5H₂O complex also belongs to monoclinic crystal system and C2/c space group. The crystal data are as follows: a=1.5343(5) nm, b=1.2880(4) nm, c=2.6154(8) nm, b=96.033(5)°, V=5.140(3) nm³, Z=8, M=768.89, D_c=1.987 g cm⁻³, μ=3.833 mm⁻¹ and F(000)=3032. The final R₁ and wR₁ are 0.0321 and 0.0671 for 4445 (I>2σ(I)) unique reflections, R₂ and wR₂ are 0.0432 and 0.0699 for all 10207 reflections, respectively. The Er^IIIN₂O₇ part in the [Er^III(nta)₂(H₂O)]³⁻ complex anion has the same structure as Nd^IIIN₂O₇ part in which the eight coordinate atoms (two N and six O) are from the two nta ligands and a water molecule coordinate to the central Nd^III ion directly.     

The dehydroxylation of basic aluminum sulfate: An infrared emission spectroscopic study

The tridecameric aluminum polymer [AlO₄Al₁₂(OH)₂₄(H₂O)₁₂]⁷⁺ was prepared by forced hydrolysis of Al³⁺ up to an OH/Al molar ratio of 2.2. Upon addition of sulfate, the tridecamer crystallized as the monoclinic basic aluminum sulfate Na_0.1[AlO₄Al₁₂(OH)₂₄(H₂O)₁₂](SO₄)_3.55. The dehydroxylation of the basic aluminum sulfate has been studied by Fourier transform in-situ infrared emission spectroscopy over a temperature range of 200° to 750°C at 50°C intervals. The spectrum is characterized by the sulfate ν₁ (1024 cm⁻¹), ν₃ doublet (1117 and 1168 cm⁻¹) and the ν₄ doublet (568 and 611 cm⁻¹) modes. Furthermore, minor bands assigned to nitrate are observed. Upon heating from ≈350° to 400°C major changes are observed, especially in the bandwidth and band intensities. The bands in the hydroxyl stretching region due to the Al₁₃ group disappear, whereas the bands around 1050 cm⁻¹ display various changes in bandwidths, intensities and positions associated with the dehydration and dehydroxylation of the basic sulfate and the changing of the structure into an aluminum oxosulfate. The nitrate bands diminish upon heating.     

Synthesis and crystal structure of two novel nickel (imidazole) complexes having hydrogen-bonded networks

Two nickel (imidazole) complexes, Ni(im)₆Cl₂·4H₂O (1) and Ni(im)₆(NO₃)₂ (2) (im=imidazole) have been synthesized and characterized by elemental analysis, IR, UV, TG and single crystal X-ray diffraction. 1 crystallizes in the triclinic space group P-1 with a=8.800(6) Å, b=9.081(6) Å, c=10.565(7) Å, =75.058(9)°, β=83.143(8)°, γ=61.722(8)°, V=718.3(8) Å³, Z=1 and R₁ (wR₂)=0.0469 (0.1497). 2 crystallizes in the trigonal space group R-3 with a=12.370(6) Å, b=12.370(6) Å, c=14.782(14) Å, =90.00°, β=90.00°, γ=120.00°, V=1959(2) Å³, Z=3 and R₁ (wR₂)=0.0358 (0.0955). 1 and 2 exhibit different supramolecular network due to their different counter anions and different hydrogen bonding connection. In compound 1, [Ni(im)₆]²⁺ cation and counter anions Cl⁻ alternatively array in an ABAB fashion via N–HCl hydrogen bonding. In compound 2, the plane of each NO₃²⁻ is almost parallel and each NO₃²⁻ connect three different [Ni(im)₆]²⁺ cations via N–HO hydrogen bonding.     

Flow injection hydride generation electrothermal atomic absorption spectrometric determination of toxicologically relevant arsenic in urine

Analytical procedure for the determination of toxicologically relevant arsenic (the sum of arsenite, arsenate, monomethylarsonate and dimethylarsinate) in urine by flow injection hydride generation and collection of generated inorganic and methylated hydrides on an integrated platform of a transverse-heated graphite atomizer for electrothermal atomic absorption spectrometric determination (ETAAS) is elaborated. Platforms are pre-treated with 2.7 μmol of zirconium and then with 0.10 μmol of iridium which serve both as an efficient hydride sequestration medium and permanent chemical modifier. Arsine, monomethylarsine and dimethylarsine are generated from diluted urine samples (10–25-fold) in the presence of 50 mmol L⁻¹ hydrochloric acid and 70 mmol L⁻¹ l-cysteine. Collection, pyrolysis and atomization temperatures are 450, 500, 2100 and 2150 °C, respectively. The characteristic mass, characteristic concentration and limit of detection (3σ) are 39 pg, 0.078 μg L⁻¹ and 0.038 μg L⁻¹ As, respectively. The limits of detection in urine are ca. 0.4 and 1 μg L⁻¹ with 10- and 25-fold dilutions. The sample throughput rate is 25 h⁻¹. Applications to several urine CRMs are given.     

Release properties on gelatin-gum arabic microcapsules containing camphor oil with added polystyrene

In this study, gelatin blended with arabic gum microcapsules containing camphor oil with added polystyrene were fabricated by a compound coacervation method. The parameters of oil/wall volume ratio, emulsification stirring speed, concentration of cross-linking agent, treated time and oil release properties were investigated. In order to improve the constant release effect of camphor oil, oil-soluble polystyrene (PS) was used as a sustained release agent. The camphor oil release curves were expressed by the exponential equation: ψ(t) = C_eq(1–e^−t/τ), where ψ(t) represent the variant of camphor oil concentration in the operation environment, C_eq as the equilibrium state, t as the release time and τ as time constant. C_eq and τ are significant factors pertaining to the camphor oil release properties. The results indicated that, for the microcapsules, the optimal oil/wall volume ratio was 0.75 to achieve the encapsulation efficiency of 99.6 wt.%. The average particle size were 294.7 ± 14.2 μm, 167.2 ± 11.2 μm, 85.7 ± 8.7 μm at the homogenization stirring speed of 500, 1000, and 2000 rpm, respectively. The effect of sustained oil release will increase whereas the stirring speed decreases and the concentration of glutaraldehyde (GA) and treated time increases. Along with the increasing of quantity of polystyrene added, C_eq decreased and τ increased, indicating that the sustained oil release amount and the release rate depend on the quantity of PS considerably.     

Reverse flow injection spectrophotometric determination of iron(III) using chlortetracycline reagent

A simple reversed flow injection colourimetric procedure for determining iron(III) was proposed. It is based on the reaction between iron(III) with chlortetracycline, resulting in an intense yellow complex with a suitable absorption at 435 nm. A 200 μl chlortetracycline reagent solution was injected into the phosphate buffer stream (flow rate 2.0 ml min⁻¹) which was then merged with iron(III) standard or sample in dilute nitric acid stream (flow rate 1.5 ml min⁻¹). Optimum conditions for determining iron(III) were investigated by univariate method. Under the optimum conditions, a linear calibration graph was obtained over the range 0.5–20.0 μg ml⁻¹. The detection limit (3σ) and the quantification limit (10σ) were 0.10 and 0.82 μg ml⁻¹, respectively. The relatives standard deviation of the proposed method calculated from 12 replicate injections of 2.0 and 10.0 μg ml⁻¹ iron(III) were 0.43 and 0.59%, respectively. The sample throughput was 60 h⁻¹. The proposed method has been satisfactorily applied to the determination of iron(III) in natural waters.     

Characterization and decomposition mechanism of an unusual nickel, thiocyanate and 4-methylpyridine polymeric complex

The synthesis, characterization, and thermal decomposition of the [Ni(SCN)₂(H⁺SCN)₂(4-mepy)₂] compound with an octahedral structure in polymeric chain were reported, in which SCN groups form bridges among Ni(II) ions. The compound decomposes in water resulting in a pH<4 solution. The FT-IR spectrum presented doublet bands at 2117; 2128 cm⁻¹, 788; 773 cm⁻¹ assigned to ν(C---N) and ν(C---S) stretching modes, respectively, and δ(SCN) deformation modes at 468; 476 cm⁻¹. The Raman spectrum of the compound presented the ν(C---N) stretching as a strong doublet at 2122; 2128 cm⁻¹, ν(C---S) at 783; 770 cm⁻¹, and δ(SCN) at 468; 477 cm⁻¹. No significant changes were observed in the 4-mepy ligand bands compared with the vibrational frequencies of the pure compound or the compound in aqueous solution 0.2 mol l⁻¹. The crystal UV–vis reflectance spectrum presented two bands centered in 626 and 424 nm tentatively assigned to the d→d type transitions, ³A_2g→³T_1g and ³A_2g→³T_1g, for a symmetry close to O_h. The TG curve showed a mass loss between 120 and 200 °C assigned to the loss of the two 4-mepy molecules; from 200 to 265 °C, the loss of the two H⁺SCN groups; and from 265 to 450 °C, the loss of the two SCN groups that formed the bridges among the nickel atoms. Based on these mass loss data, a mechanism of thermal decomposition for the compound was proposed.     

Kinetics study of the gas-phase reactions of C2F5OC(O)H and n-C3F7OC(O)H with OH radicals at 253–328 K

The rate constants, k₁ and k₂ for the reactions of C₂F₅OC(O)H and n-C₃F₇OC(O)H with OH radicals were measured using an FT-IR technique at 253–328 K. k₁ and k₂ were determined as (9.24 ± 1.33) × 10⁻¹³ exp[−(1230 ± 40)/T] and (1.41 ± 0.26) × 10⁻¹² exp[−(1260 ± 50)/T] cm³ molecule⁻¹ s⁻¹. The random errors reported are ±2 σ, and potential systematic errors of 10% could add to the k₁ and k₂. The atmospheric lifetimes of C₂F₅OC(O)H and n-C₃F₇OC(O)H with respect to reaction with OH radicals were estimated at 3.6 and 2.6 years, respectively.     

Kinetic investigation of electronic energy transfer processes following the pulsed dye-laser generation of excited atomic barium, Ba[6s6p(P1)], in the presence of atomic strontium

The collisional behaviour of Ba[6s5d(³D_J)], 1.151 eV above the 6s²(¹S₀) electronic ground state, in the presence of atomic strontium, has been investigated in the ‘long-time domain' (ca. 100 μs–1 ms) following the pulsed dye-laser excitation of barium vapour at elevated temperature at λ = 553.5 nm (Ba[6s6p(¹P₁)] ← Ba[6s²(¹S₀)]. Ba(³D_J) is subsequently produced from the short-lived ¹P₁ state (τ_e = 8.37 ± 0.38 ns) by a number of radiative and collisional processes. It may then be monitored in the ‘long-time domain' by atomic spectroscopic marker methods involving either collisional activation of Ba(³D_J) by Ba(¹S₀) and He buffer gas to yield Ba[6s6p(³P_J)] with subsequent emission from the ³P₁ state (τ_e = 1.2 ± 0.1 μs): Ba[6s6p(³P₁)] → Ba[6s²(¹S₀)] + hv (λ = 791.1 nm). Alternatively, emission from Ba(¹P₁) may be monitored at long times following the generation of this short-lived state by energy pooling following self-annihilation of Ba(³D_J) + Ba(³D_J) from Ba[6s6p(¹P₁)] → Ba[6s²(¹S₀)] + hv (λ = 553.5 nm). The generation of Ba(³D_J) in the presence of atomic strontium yields emission in the long-time domain from Sr[5s5p(³P₁)] (τ_e = 19.6 μs): Sr[5s5p(³P₁)] → Sr[5s²(¹S₀)]  + hv (λ = 689.3 nm). Whilst the decay profiles at short times are complex in form, at long times all these atomic profiles show first-order kinetic removal with the decay coefficients for λ = 791.1 nm, 689.3 nm and 553.5 nm emissions in the ratio 1 : 2 : 2, consistent with overall third-order activation of the form: Ba(³D_J) + Ba(³D_J) + Sr(¹S₀) → Sr(³P_J) + 2Ba(¹S₀). The mechanism is modelled in detail, including measurement of integrated emission intensities, yielding kinetic data for fundamental collisional processes. The overall rate constant for the third-order collisional activation of Sr[5s5p(³P_J])from 2Ba[6s5d(³D_J)] + Sr[5s²(¹S₀)] takes the upper limit of 5.8 × 10⁻²⁷ cm⁶ atom⁻² s⁻¹ (T = 900 K). The rate constant for the two body collisional quenching of Ba[6s5d(³D_J)] by ground state atomic strontium, Sr[5s²(¹S₀)], is found to be (2.0 ± 0.1) × 10⁻¹² cm³ atom⁻¹ s⁻¹ (T = 900 K).     

Determination of nanomolar concentrations of phosphate in freshwaters using flow injection with luminol chemiluminescence detection

A simple and rapid flow injection (FI) method is reported for the determination of phosphate (as molybdate reactive P) in freshwaters based on luminol chemiluminescence (CL) detection. The molybdophosphoric heteropoly acid formed by phosphate and ammonium molybdate in acidic conditions generated chemiluminescence emission via the oxidation of luminol. The detection limit (3× standard deviation of blank) was 0.03 μg P l⁻¹ (1.0 nM), with a sample throughput of 180 h⁻¹. The calibration graph was linear over the range 0.032–3.26 μg P l⁻¹ (r²=0.9880) with relative standard deviations (n=4) in the range 1.2–4.7%. Interfering cations (Ca(II), Mg(II), Ni(II), Zn(II), Cu(II), Co(II), Fe(II) and Fe(III)) were removed by passing the sample through an in-line iminodiacetate chelating column. Silicate interference (at 5 mg Si l⁻¹) was effectively masked by the addition of tartaric acid and other common anions (Cl⁻, SO₄²⁻, HCO₃⁻, NO₃⁻ and NO₂⁻) did not interfere at their maximum admissible concentrations in freshwaters. The method was applied to freshwater samples and the results (26.1±1.1–62.0±0.4 μg P l⁻¹) were not significantly different (P=0.05) from results obtained using a segmented flow analyser method with spectrophotometric detection (24.4±4.45–84.0±16.0 μg P l⁻¹).     

Reverse flow injection spectrophotometric determination of iron(III) using norfloxacin

A reversed flow injection colorimetric procedure for determining iron(III) at the μg level was proposed. It is based on the reaction between iron(III) with norfloxacin (NRF) in 0.07 mol l⁻¹ ammonium sulfate solution, resulting in an intense yellow complex with a suitable absorption at 435 nm. Optimum conditions for determining iron(III) were investigated by univariate method. The method involved injection of a 150 μl of 0.04% w/v colorimetric reagent solution into a merged streams of sample and/or standard solution containing iron(III) and 0.07 mol l⁻¹ ammonium sulfate in sulfuric acid (pH 3.5) solution which was then passed through a single bead string reactor. Subsequently the absorbance as peak height was monitored at 435 nm. Beer's law obeyed over the range of 0.2–1.4 μg ml⁻¹ iron(III). The method has been applied to the determination of total iron in water samples digested with HNO₃–H₂O₂ (1:9 v/v). Detection limit (3σ) was 0.01 μg ml⁻¹ the sample through of 86 h⁻¹ and the coefficient of variation of 1.77% (n=12) for 1 μg ml⁻¹ Fe(III) were achieved with the recovery of the spiked Fe(III) of 92.6–99.8%.     

Structure analysis and the standard molar enthalpy of formation of a coordination polymer [Co(TO)2Cl2]n (TO = 1,2,4-triazole-5-one)

A coordination polymer was synthesized by the reaction of CoCl₂ with 1,2,4-triazole-5-one (TO) and charaterized by means of IR and TG–DTG. Single-crystal structure analysis showed that the complex crystallized in the monoclinic space group C2/c: a = 23.105(9) Å, b = 3.5683(2) Å, c = 13.589(6) Å,  = 90°, β = 124.038(4)°, γ = 90°, V = 928.4(7) Å³, Z = 4. The standard molar enthalpy of formation of the complex was determined to be (−1034.28 ± 0.95) kJ mol⁻¹.     

Amphiphile bilayer films from DPPC: bilayer lipid membranes and Newton black films

Amphiphile bilayer films are obtained from 1,2 dipalmitoyl-glycero-3-phosphocholine (DPPC): bilayer lipid membranes (BLM) and Newton black films (NBF), through thinning of the respective thin liquid films, thus allowing for a very precise determination of the moment of their formation. Stability (or rupture) and formation of BLM and NBF are considered from a unified point of view with the microscopic theory of Kashchiev–Exerowa [J. Colloid Interface Sci., 77 (1980) 501–511], based on the formation of nanoscopic holes in them. BLM and NBF are obtained and studied with the microinterferometric method of Scheludko–Exerowa in its contemporary version. The equivalent thickness of both BLM (in benzene solution between two water phases with 0.1 M NaCl) and NBF in aqueous DPPC solution (in the presence of 0.1 M NaCl) is determined as being h_w = 7.0 nm for BLM and h_w = 7.8 nm for NBF. By means of the dependences: BLM lifetime versus DPPC concentration and probability for BLM formation versus DPPC concentration, it is established that there exist metastable BLM and stable NBF. The good fit between the experimental results of τ(C) dependence and theory in the case of BLM allow to determine the three constants: pre-exponential factor A = 1.5 × 10⁻³ s, related to the process kinetics; constant B = 20.2 ± 0.2, related to the specific hole energy γ = 1.7 × 10⁻¹¹ J/m and the equilibrium concentration C_e = 6 × 10⁻⁴ ± 7.2 × 10⁻⁶ m/l. The specific hole linear energy γ = 1.7 × 10⁻¹¹ J/m determined as well as the binding energy Q between first neighbor molecules in the bilayers Q = 1.48 × 10⁻¹⁹ J (36 kT) are lower than the ones determined for DPPC foam bilayer in gel state γ = 9.1 × 10⁻¹¹ J/m and Q = 55 kT. This means that interaction is weaker in the case of BLM. The critical concentration C_c at which bilayer formation starts is: for BLM C_c = 30 μg/ml and for NBF C_c = 70 μg/ml. This concentration characterizes quantitatively the formation of the amphiphile bilayer and is a very useful parameter that can be used for various purposes.     

Automated sequential injection fluorimetric determination and dissolution studies of Ergotamine Tartrate in pharmaceuticals

A fully automated flow system for drug-dissolution studies based on the sequential injection analysis (SIA) was described and used for monitoring dissolution profiles of Ergotamine Tartrate (ET) in pharmaceutical formulations. 50 μl of dissolution medium was taken for each measurement at a flow rate of 40 μl s⁻¹ and detected by fluorescence detector using λ_ex=236 nm (λ_em≥390 nm). The calibration curve was linear over the range 0.03–0.61 mg l⁻¹ of ET (sufficient for the dissolution tests). Equation of the calibration curve was calculated giving the following values: F=117.7 c+0.80 (n=6); r=0.9998. Detection limit was 0.01 mg l⁻¹ of ET. The R.S.D. is less than 0.54 and 0.86% (n=10) when determining 0.61 and 0.03 mg l⁻¹ of ET in standard solution, respectively. The dissolution test of Bellaspon tablets (0.3 mg of ET in 1 tablet) was programmed for 20 min, with a continuous sampling rate of 120 h⁻¹ under conditions required by BP 1993.     

Flow injection determination of bismuth in urine by successive retention of Bi(III) and tetrahydroborate(III) on an anion-exchange resin and hydride generation atomic absorption spectrometry

Bismuth as BiCl₄⁻ and BH₄⁻ ware successively retained in a column (150 mm × 4 mm, length × i.d.) packed with Amberlite IRA-410 (strong anion-exchange resin). This was followed by passage of an injected slug of hydrochloric acid resulting in bismuthine generation (BiH₃). BiH₃ was stripped from the eluent solution by the addition of a nitrogen flow and the bulk phases were separated in a gas–liquid separator. Finally, bismutine was atomized in a quartz tube for the subsequent detection of bismuth by atomic absorption spectrometry. Different halide complexes of bismuth (namely, BiBr₄⁻, BiI₄⁻ and BiCl₄⁻) were tested for its pre-concentration, being the chloride complexes which produced the best results. Therefore, a concentration of 0.3 mol l⁻¹ of HCl was added to the samples and calibration solutions. A linear response was obtained between the detection limit (3σ) of 0.225 and 80 μg l⁻¹. The R.S.D.% (n = 10) for a solution containing 50 μg l⁻¹ of Bi was 0.85%. The tolerance of the system to interferences was evaluated by investigating the effect of the following ions: Cu²⁺, Co²⁺, Ni²⁺, Fe³⁺, Cd²⁺, Pb²⁺, Hg²⁺, Zn²⁺, and Mg²⁺. The most severe depression was caused by Hg²⁺, which at 60 mg l⁻¹ caused a 5% depression on the signal. For the other cations, concentrations between 1000 and 10,000 mg l⁻¹ could be tolerated. The system was applied to the determination of Bi in urine of patients under therapy with bismuth subcitrate. The recovery of spikes of 5 and 50 μg l⁻¹ of Bi added to the samples prior to digestion with HNO₃ and H₂O₂ was in satisfactory ranges from 95.0 to 101.0%. The concentrations of bismuth found in six selected samples using this procedure were in good agreement with those obtained by an alternative technique (ETAAS). Finally, the concentration of Bi determined in urine before and after 3 days of treatment were 1.94 ± 1.26 and 9.02 ± 5.82 μg l⁻¹, respectively.     

Synthesis, structure, and fluorescence of two cadmium(II)-citrate coordination polymers with different coordination architectures

Two novel Cd(II)-citrate complexes were obtained with different metal/ligand ratios through hydrothermal method. Their structures were determined by single-crystal X-ray diffraction analysis. Although their topological structures are both 2-D layer network assemblies, both central Cd(II) ions and Hcit³⁻ ligands display completely different coordination modes. In polymeric complex 1, Hcit³⁻ serves as a μ₁₀-bridged and central Cd(II) ions adopt 6- and 8-coordinated configurations. In contrast, a μ₉-bridged and 6- and 7-coordinated environments between Cd(II) and Hcit³⁻ are established in the polymeric complex 2. Two Complexes remain stable up to approximately 300 °C. The complex 1 exhibits strong fluorescent emission band at 450 nm (λ=346 nm) as well as complex 2 exhibits strong fluorescent emission band at 430 (λ=346 nm).     

Structure and conformation of 2,3,4-triphenyl-1-oxa-4-azabutadiene

2,3,4-triphenyl-1-oxa-4-azabutadine (C20H15NO) has been studied by X-ray analysis and AM1 molecular orbital methods. It crystallises in the triclinic space group P-1 with a=9.414(3), b=10.479(3), c=8.385(2) Å, =103.31(3)°, β=97.10(3)°, γ=74.09(1)°, V=772.5(4) ų, Z=2, D_c=1.227 gcm⁻³, and μ(MoK)=0.075 mm⁻¹ and F₀₀₀=300. The structure was solved by direct methods and refined to R=0.043 for 2672 reflections [I>2σ(I)]. The conformational analysis of the title compound were investigated by semi-empirical quantum mechanical AM1 calculations. The minimum conformation energies were calculated as a function of the three torsion angles θ₁(O(1)C(7)C(8)N(1)), θ₂(C(8)N(1)C(15)C(16)) and θ₃(C(14)C(9)C(8)N(1)). The results are compared with the X-ray results. C=O and C=N groups are twisted about each other by 95.5(2)°.     

Tautomeric properties, conformations and structure of N-(2-hydroxy-5-chlorophenyl) salicylaldimine

The crystal structure of N-(2-hydroxy-5-chlorophenyl) salicylaldimine (C₁₃H₁₀NO₂Cl) was determined by X-ray analysis. It crystallizes orthorhombic space group P2₁2₁2₁ with a=12.967(2) Å, b=14.438(3) Å, c=6.231(3) Å, V=1166.5(6) Å³, Z=4, D_c=1.41 g cm⁻³ and μ(MoK)=0.315 mm⁻¹. The title compound is thermochromic and the molecule is nearly planar. Both tautomeric forms (keto and enol forms in 68(3) and 32(3)%, respectively) are present in the solid state. The molecules contain strong intramolecular hydrogen bonds, N1–H1O1/O2 (2.515(1) and 2.581(2) Å) for the keto form and O1–H01N1 for the enol one. There is also strong intermolecular O2–HO1 hydrogen bonding (2.599(2) Å) between neighbouring molecules. Minimum energy conformations AM1 were calculated as a function of the three torsion angles, θ₁(N1–C7–C6–C5), θ₂(C8–N1–C7–C6) and θ₃(C9–C8–N1–C7), varied every 10°. Although the molecule is nearly planar, the AM1 optimized geometry of the title compound is not planar. The non-planar conformation of the title compound corresponding to the optimized X-ray structure is the most stable conformation in all calculations.