Potassium,rubidium and ammonium salts of μ‐(formato‐κ2O:O′)‐μ‐oxido‐bis[oxidobis(peroxido‐κ2O,O′)molybdate(VI)]

The unit‐cell parameters of the three title salts, namely, tripotassium, K₃[Mo₂(CHO₂)O₃(O₂)₄], trirubidium, Rb₃[Mo₂(CHO₂)O₃(O₂)₄], and triammonium μ‐(formato‐κ²O:O′)‐μ‐oxido‐bis[oxidobis(peroxido‐κ²O,O′)molybdate(VI)], (NH₄)₃[Mo₂(CHO₂)O₃(O₂)₄], which were all crystallized at pH 3, are quite similar, but the potassium and rubidium salt structures are noncentrosymmetric, whereas that of the ammonium salt is centrosymmetric. Formate acts as an O:O′‐bridging ligand in the complex anion and is bound to a μ‐oxido‐bis(oxidodiperoxidomolybdate) unit.     

Obtaining of chromium(III) phosphates(V) in the solid-state and their thermal stability

As a result of solid-state reactions four chromium(III) phosphates(V) have been obtained, i.e. Cr(PO₃)₃, Cr₄(P₂O₇)₃, Cr₂P₄O₁₃ and CrPO₄. Cr₂P₄O₁₃ has been obtained as a result of a solid-state reaction between Cr₂O₃ and (NH₄)₂HPO₄ as well as between CrPO₄ and Cr(PO₃)₃ mixed at a molar ratio of 1:1 or between Cr₄(P₂O₇)₃ and Cr(PO₃)₃ mixed at a molar ratio of 1:2. Melting temperatures and the products of thermal decomposition have been determined for the obtained chromium(III) phosphates(V).     

Bariumstannat‐Pulver durch hydrothermale Synthese und durch Thermolyse von Bariumzinn(IV)‐glykolaten. Synthese und Struktur von [Ba(C2H6O2)4][Sn(C2H4O2)3] und [Ba(C2H6O2)2][Sn(C2H4O2)3]·CH3OH

Barium Stannate Powders from Hydrothermal Synthesis and by Thermolysis of Barium‐Tin(IV)‐Glycolates. Synthesis and Structure of [Ba(C₂H₆O₂)₄][Sn(C₂H₄O₂)₃] and [Ba(C₂H₆O₂)₂][Sn(C₂H₄O₂)₃]·CH₃OH The hydrothermal reaction as well as the microwave assisted hydrothermal reaction of SnO₂·aq with barium hydroxide gives Ba[Sn(OH)₆] ( 1 ) as powder with bar like particles. Compound 1 of the same morphology can also be isolated from a hydrothermal reaction of [Ba(C₂H₆O₂)₄][Sn(C₂H₄O₂)₃] ( 3 ). The reaction of SnO₂·aq with Ba(OH)₂·8H₂O in ethylene glycol yields the glycolate [Ba(C₂H₆O₂)₄][Sn(C₂H₄O₂)₃] ( 3 ), which forms in methanol the solvate [Ba(C₂H₆O₂)₂][Sn(C₂H₄O₂)₃]·CH₃OH ( 4 ). Compounds 1 , 3 and 4 react at different temperatures to BaSnO₃ ( 2 ) consisting of powders with different morphologies; because of the grain size of the resulting powders compounds 3 and 4 are suitable as precursor for the fabrication of corresponding ceramics.     

Preparation,characterization and catalytic oxidation properties of bis‐quaternary ammonium peroxotungstates and peroxomolybdates complexes

Several novel kinds of bis‐quaternary ammonium peroxotungstates and peroxomolybdates, such as PhCH₂N(CH₂CH₂)₃NCH₂Ph[W₂O₃(O₂)₄], PhCH₂N(CH₂CH₂)₃NCH₂Ph [Mo₂O₃(O₂)₄], [PhCH₂(CH₃)₂NCH₂]₂[W₂O₃(O₂)₄] and [PhCH₂(CH₃)₂NCH₂]₂[Mo₂O₃(O₂)₄], have been synthesized and characterized by elemental analysis, IR and Raman spectroscopy. Their catalytic properties in mild oxidation of benzyl alcohol and ring‐substituted benzyl alcohols were investigated with aqueous 30% H₂O₂ under halide‐ and organic solvent‐free conditions. Copyright © 2007 John Wiley & Sons, Ltd.     

Sol-Gel Processing of Some Electroceramic Powders

This review deals with the solution-sol-gel processing (SSG) of powders such as BaTiO₃, MgTiO₃, PbTiO₃, Bi₄Ti₃O₁₂, La₂Ti₂O₇, Pb(Zr_0.52Ti_0.48)O₃, Pb(Mg_1/3Nb_2/3)O₃ and Ba(Mg_1/3Ta_2/3)O₃. Fine powders of good sinterability can be easily obtained at low temperatures although the process can be expensive and time consuming. We propose a nanocomposite route which utilizes nanophases of different components as a cost-effective alternative to sol-gel process for powder preparation.     

Coordination,oligomerisation and transfer hydrogenation of acetylenes by some ruthenium and osmium carboxylates: Crystal and molecular structures of bis(trifluoroacetato)carbonyl-(methanol) bis(triphenylphosphine)ruthenium(II) and (1,4-diphenylbut-1-en-3-yn-2-yl)trifluoroacetato-(carbonyl) bis(triphenylphosphine)ruthenium(II)

The hydrides [MH(O₂CCF₃)(CO)(PPh₃)₂] (M = Ru or Os) react with disubstituted acetylenes PhCCPh and PhCCMe to afford vinylic products [M{C(Ph)CHPh}(O₂CCF₃)(CO)(PPh₃)₂] and [M{C(Ph)CHMe}(O₂CCF₃)(CO) (PPh₃)₂]/[M{C(Me)CHPh}(O₂CCF₃)(CO)(PPh₃)₂] respectively. Acidolysis of these products with trifluoroacetic acid in cold ethanol liberates cis-stilbene and cis-PhHCCHMe respectively thus establishing the cis-stereochemistry of the vinylic ligands. The complexes [M(O₂CCF₃)₂(CO)(PPh₃)₂] formed during the acidolysis step undergo facile alcoholysis followed by β-elimination of aldehyde to regenerate the parent hydrides [MH(O₂CCF₃)(CO)(PPh₃)₂] and thereby complete a catalytic cycle for the transfer hydrogenation of acetylenes. The molecular structure of the methanol-adduct intermediate, [Ru(O₂CCF₃)₂(MeOH)(CO)(PPh₃)₂] has been determined by X-ray methods and shows that the coordinated methanol is involved in H-bonding with the monodentate trifluoroacetate ligand [MEO-H---OC(O)CF₃; O...O = 2.54 Å]. The hydrides [MH(O₂CCF₃)(CO) (PPh₃)₂]react with 1,4-diphenylbutadiyne to afford the complexes [M{C(CCPh)CHPh} (O₂CCF₃)(CO)(PPh₃)₂]. The ruthenium product, which has also been obtained by treatment of [RuH(O₂CCF₃)(CO)(PPh₃)₂] with phenylacetylene, has been shown by X-ray diffraction methods to contain a 1,4-diphenylbut-1-en-3-yn-2-yl ligand. The osmium complexes [Os(O₂CCF₃)₂(CO)(PPh₃)₂], [OsH(O₂CCF₃)(CO)(PPh₃)₂] and [Os{C(CCPh)CHPh}(O₂CCF₃)(CO)(PPh₃)₂] all serve as catalysts for the oligomerisation of phenylacetylene. Acetylene reacts with [Ru(O₂CCF₃)₂(CO)(PPh₃)₂] in ethanol to afford the vinyl complex [Ru(CHCH₂)(O₂CCF₃)(CO)(PPh₃)₂].     

Vibrational spectra of the peroxotantalates (NH4)3[Ta(O2)4], K3[Ta(O2)4], Rb3[Ta(O2)4] and Cs3[Ta(O2)4] and the crystal structure of Rb3[Ta(O2)4]

The compounds (NH₄)₃[Ta(O₂)₄], K₃[Ta(O₂)₄], Rb₃[Ta(O₂)₄] and Cs₃[Ta(O₂)₄] have been prepared and investigated by X-ray powder methods as well as Raman- and IR-spectroscopy. In the case of Rb₃[Ta(O₂)₄] the structure has been solved from single crystal data. It is shown that all these compounds are isotypic and crystallize in the K₃[Cr(O₂)₄] type (SG , No. 121). The infrared- and Raman spectra (recorded on powdered samples) are discussed with respect to the internal vibrations of the peroxo-group and the dodecahedral [Ta(O₂)₄]³⁻ ion. Symmetry coordinates for the [Ta(O₂)₄]³⁻ ion are given from which the vibrational modes of the O-O stretching vibrations of the O₂²⁻ groups, the Ta-O stretching vibrations and the Ta-O bending vibrations are deduced.     

Coupled TG-MS study on the intermediate for formation of PbO(t) from PbO(O) in synthesis of perovskite PMN-PT

Pb(OH)₂ was previously proposed as an intermediate in the synthesis of PMN [Pb(Mg_1/3Nb_2/3)O₃] and PMN-PT [0.9Pb(Mg_1/3Nb_2/3)O₃-0.1PbTiO₃] from a mixture of PbO, Nb₂O₅, Mg(NO₃)₂·6H₂O (w/w₀) TiO₂ by the modified mixed oxide method based on TG/DSC and XRD data. Coupled TG-MS of the precursor reveals that the intermediate is Pb₆O₅(NO₃)₂, not Pb(OH)₂ because the evolved gas was nitric oxide and oxygen, not water.     

Lanthankomplexe mit 2,2′-Bipyridin-N,N′-dioxid

Compounds of the composition La(bpyO₂ ^*)₄Cl₃·4H₂O, La(bpyO₂)₃Cl₃·5H₂O, La(bpyO₂)₂Cl₃·3H₂O, La(bpyO₂)Cl₃·3H₂O, La(bpyO₂)₄Br₃·4H₂O, La(bpyO₂)₃Br₃·8H₂O, La(bpyO₂)₂Br₃·7H₂O, La(bpyO₂)Br₃·4H₂O, La(bpyO₂)₄I₃·3H₂O, La(bpyO₂)₃(NO₃)₃·2H₂O, La(bpyO₂)₂(NO₃)₃·2H₂O, La(bpyO₂)₄(SCN)₃·3H₂O, La(bpyO₂)₃(SCN)₃·2H₂O, La(bpyO₂)₂(SCN)₃·2H₂O were isolated. They were investigated by means of thermoanalysis, I.R. spectroscopy, X-ray diffraction and molar conductivity.     

Vibrational spectra of MII3Pb(P2O7)2 (MII = Ni,Co)

Raman and IR spectra of polycrystalline Ni₃Pb(P₂O₇)₂ and Co₃Pb(P₂O₇)₂ have been recorded and analyzed. The internal modes are assigned in terms of PO₃ and POP vibrations. The results point to a bent POP bridge configuration in Co₃Pb(P₂O₇)₂ as in Ni₃Pb(P₂O₇)₂. In the cobalt compound, the P₂O⁴⁻₇ ions are distorted. Non-coincidence of the majority of the Raman and IR bands confirms a centrosymmetric structure for Ni₃Pb(P₂O₇)₂, and Co₃Pb(P₂O₇)₂. The POP bridge angle is slightly higher in the cobalt compound than in the nickel compound.     

A Theoretical Study on the Mechanism of C2H4 Oxidation over a Neutral V3O8 Cluster

Density functional theory (DFT) calculations are used to investigate the reaction mechanism of V₃O₈+C₂H₄. The reaction of V₃O₈ with C₂H₄ produces V₃O₇CH₂+HCHO or V₃O₇+CH₂OCH₂ overall barrierlessly at room temperature, whereas formation of hydrogen‐transfer products V₃O₇+CH₃CHO is subject to a tiny overall free energy barrier (0.03 eV), although the formation of the last‐named pair of products is thermodynamically more favorable than that of the first two. These DFT results are in agreement with recent experimental observations. The (O_b)₂V(O_tO_t)^. (b=bridging, t=terminal) moiety containing the oxygen radical in V₃O₈ is the active site in the reaction with C₂H₄. Similarities and differences between the reactivities of (O_b)₂V(O_tO_t)^. in V₃O₈ and the small VO₃ cluster [(O_t)₂VO_t^.] are discussed. Moreover, the effect of the support on the reactivity of the (O_b)₂V(O_tO_t)^. active site is evaluated by investigating the reactivity of the cluster VX₂O₈, which is obtained by replacing the V atoms in the (O_b)₃VO_t support moieties of V₃O₈ with X atoms (X=P, As, Sb, Nb, Ta, Si, and Ti). Support X atoms with different electronegativities influence the oxidative reactivity of the (O_b)₂V(O_tO_t)^. active site through changing the net charge of the active site. These theoretical predictions of the mechanism of V₃O₈+C₂H₄ and the effect of the support on the active site may be helpful for understanding the reactivity and selectivity of reactive O^. species over condensed‐phase catalysts.     

Thermal analysis of some polynuclear coordination compounds

The thermal behaviour of five polynuclear coordination compounds containing tartaric anion as ligand, namely (NH₄)₃[LnFe(C₄O₆H₄)₃(OH)₃] (Ln=La and Eu), (NH₄)₂[PrFe(C₄O₆H₄)₃(OH)₂] and (NH₄)[LnFe(C₄O₆H₄)₃(OH)]·3H₂O (Ln=Nd and Gd) was investigated. The reaction progress was studied by TG/DTA and FTIR measurements. Oxalates and oxocarbonates were identified as intermediates. In the case of Ln=La, Nd, Pr, Eu and Gd, pure LnFeO₃ was obtained as final decomposition product. The thermal decomposition of Eu-Fe compound, leads to a mixture of mixed (ortho-ferrite (EuFeO₃) and garnet (Eu₃Fe₅O₁₂)) and simple oxides (Eu₂O₃ and α-Fe₂O₃).     

（TEAH）nH3-nPW12O40催化苯甲醇选择氧化及其反应机理

以Keggin结构的磷钨酸和三乙胺（TEA）为原料,通过简单的酸碱反应合成了磷钨酸的TEA盐.并以它们为催化剂,考察了以H₂O₂为氧化剂、以水为溶剂的体系中苯甲醇选择氧化制备苯甲醛的反应性能.结果表明,（TEAH）_nH_3-nPW₁₂O₄₀（n=1,2,3）系列催化剂对苯甲醇的选择氧化反应有很高的活性和选择性,且可被分离和循环使用.在适宜的反应条件下,最佳催化剂（TEAH）H₂PW₁₂O₄₀上,苯甲醇的转化率可达99.6%,苯甲醛的选择性为100%.还采用IR,³¹PNMR谱和元素分析技术,对催化剂和反应过程中催化剂物种的转化和分布进行了考察,进而导出了反应机理.在这个水--油两相反应中,（PW₁₂O₄₀）^3-首先在H₂O₂的作用下,氧化降解为溶于水的小分子过氧物种（PO₄（WO（O₂）₂）₄）^3-和自由W物种.（PO₄（WO（O₂）₂）₄）^3-是真正的活性物种,可将部份溶于水层的苯甲醇氧化为苯甲醛,自身转变为失去活性氧的反应后物种（SAR）.而SAR又可与自由W物种一起聚合为前驱体状态的（PW₁₂O₄₀）^3-,完成催化循环.     

A new class of 30-molybdo complexes: Formation,structure and electrochemical properties of bisselenitopyrophosphatotriacontamolybdate, [(SeO3)2(P2O7)Mo30O90]8−, and bispyrophosphatotriacontamolybdate, [(P2O7)2Mo30O90]8−

The tetrapropylammonium (Pr₄N⁺) salt of [(SeO₃)₂(P₂O₇)Mo₃₀O₉₀]^8? was prepared from a 75 mM Mo^VI–2.8 mM P₂O₇^4?–5.6 mM SeO₃^2?–0.95 M HCl–60% (v/v) CH₃CN system, where [(P₂O₇)Mo₁₈O₅₄]^4? and [H₆(SeO₃)₂Mo₁₅O₄₈]^4? are first formed, then being spontaneously fused into [(SeO₃)₂(P₂O₇)Mo₃₀O₉₀]^8?. The [(SeO₃)₂(P₂O₇)Mo₃₀O₉₀]^8? anion may be isotypic with [(HPO₃)₂(P₂O₇)Mo₃₀O₉₀]^8?, in which each side of a (P₂O₇)Mo₁₂O₄₂ fragment is capped by a B-type (HPO₃)Mo₉O₂₄ unit derived from [H₆(HPO₃)₂Mo₁₅O₄₈]^4?. [(XO₃)₂(P₂O₇)Mo₃₀O₉₀]^8? (X = HP, Se) have the same type of 30-molybdo framework as [(P₂O₇)₂Mo₃₀O₉₀]^8?, previously isolated by Koltz. These three 30-molybdo complexes with the same ionic charge of ?8 constitute a new class of polyoxometallates and have common properties of undergoing a two-electron reduction in the absence of H⁺.     

Thermogravimetric study of uranium phosphates

The thermal decomposition of (UO₂)₃(PO₄)₂ and U(HPO₄)₂ ·xH₂O in the temperature range 25–1600?, was investigated. (UO₂)₃(PO₄)₂ decomposed first to 1/3[U₃O₈ + 3U₂O₃P₂O₇] and then to U₃O₅P₂O₇ before a loss of phosphorus was observed above 1350?. Decomposition in air and in inert atmospheres was nearly identical. Reduction with H₂ or with carbon black in argon gave U₃O₅P₂O₇ and [UO₂ + + (UO)₂P₂O₇] before pure UO₂ was formed. U(HPO₄)₂ ·xH₂O decomposed to UP₂O₇ in argon. It oxidized partly in air before the same product was obtained. The high temperature stability of UP₂O₇ and U₃(PO₄)₄ was also investigated.     

Basische Carbonate des Dysprosiums: Dy2O2(CO3) und Dy(OH)(CO3)

Basic Carbonates of Dysprosium: Dy₂O₂(CO₃) and Dy(OH)(CO₃) Single crystals of the basic carbonates Dy₂O₂(CO₃) and Dy(OH)(CO₃) are obtained via hydrothermal synthesis from a mixture of DyCl₃ · 6 H₂O and K₂CO₃ and Cs₂CO₃, respectively, as well as CO₂ and H₂O in a steel autoclave at 480 and 400 °C, respectively. The crystal structures are isotypic with those of II‐Nd₂O₂(CO₃) and B–Nd(OH)(CO₃), respectively; Dy₂O₂(CO₃): hexagonal, P6₃/mmc, Z = 2; a = 386.9(2), c = 1516.3(3) pm; Dy(OH) · (CO₃): hexagonal, P‐6, Z = 18; a = 1201.0(1), c = 971.8(9) pm.     

Solid-state reactions between alkali persulfates and oxides of corundum structure

The effects of three corundum structure oxides, α-Al₂O₃, α-Cr₂O₃, and α-Fe₂O₃, on the thermal decomposition of sodium and potassium peroxodisulfates (persulfates) under non-isothermal static air conditions and using various oxide/persulfate molar ratios, have been thermoanalytically investigated. Compounds such as Na₃Al(SO₄)₃, K₃Al(SO₄)₃, Cr₂(SO₄)₃, K₃Cr(SO₄₃, and Na₃Fe(SO₄)₃ are identified by X-ray diffractometry and conventional chemical analysis. The molar ratios as well as temperatures of the stoichiometric formation for these compounds have been established. At higher temperatures, α-Al₂O₃ acts as a promoter catalyst for the decomposition of pyrosulfate to sulfate, whereas α-Cr₂O₃ behaves as a retarder for the decomposition of persulfate. A eutectic mixture is formed between K₃Al(SO₄) and K₂SO₄ at 675°C. Also, K₃Fe(SO₄)₃ is identified as two crystalline phases.     

Peroxofluorokomplexe der Übergangsmetalle. VII. Peroxofluorokryolithe A3Ti(O2)F5 (A = K,Na) und K2NaTi(O2)F5 Kristallstruktur von K3Ti(O2)F5

Transition Metal Peroxofluoro Complexes. VII. Peroxofluorokryolithes A₃Ti(O₂)F₅ (A = K, Na) and K₂NaTi(O₂)F₅. Crystal Structure of K₃Ti(O₂)F₅ Peroxofluorokryolithes A₃Ti(O₂)F₅ (A = K, Na) and K₂NaTi(O₂)F₅ were prepared at pH 4.5–6 by adding H₂O₂ and AOH/AF to solutions of TiO₂ in hydrofluoric acid or aqueous solutions of TiF₄. In the range of pH 3–4.5 exist phases of peroxofluoro-kryolithes with variations in stoichiometrie. A single crystall X-ray structure analysis of K₃Ti(O₂)F₅ (Fm3m, a = 883.6(1) pm) yielded a disordered kryolithstructure (R = 0.020, R_W = 0.017). Na₃Ti(O₂)F₅ was found to crystallize in two monoclinic low-temperature – and one cubic high-temperature modifications. K₂NaTi(O₂)F₅ crystallizes cubic (Fm3m) with a = 847.8(1) pm. Vibrational spectra have been measured and thermal behavior was studied by DTA/DTG and high-temperature guinier. At pH 9.5 K₃Ti(O₂)₂F₃ has been synthesized     

Tetraalkylammonium fluorooxoperoxovanadates

Summary Compounds crystallizing from theMOH-HF-V₂O₅-H₂O₂-H₂O (M=N(CH₃)₄, N(C₂H₅)₄, N(C₄H₉)₄) system have been characterized by elemental analysis, vibrational spectra, and X-ray powder patterns. Besides [N(CH₃)₄]₂[VO(O₂)₂F]·2H₂O (1) and [N(CH₃)₄]₃[V₂O₂(O₂)₄F] (2) which correspond to the known compoundsM ₂[VO(O₂)₂F] (M=K, NH₄, Cs) and (NH₄)₃[V₂O₂(O₂)₄F]·2H₂O, respectively, complexes of two new types have been obtained: [N(C₂H₅)₄]₂[V₂O_5–x (O₂) _x F₂]·H₂O(x0.25,3) and the first trinuclear peroxo complex of vanadium(V), [N(C₄H₉)₄]₂[V₃O₃(O₂)₄F₃]·6H₂O(4).

---

Tetraalkylammonium-Fluorooxoperoxovanadate

Zusammenfassung Aus dem SystemMOH-HF-V₂O₅-H₂O₂-H₂O (M=N(CH₃)₄), N(C₂H₅)₄, N(C₄H₉)₄) kristallisierende Verbindungen wurden mittels Elementaranalyse, Schwingungsspektroskopie und Röntgendiffraktion charakterisiert. Neben [N(CH₃)₄]₂[VO(O₂)₂F]·2H₂O (1) und [N(CH₃)₄]₃][V₂O₂(O₂)₄F] (2), welche den bekannten VerbindungenM ₂[VO(O₂)₂F] (M=K, NH₄, Cs) und (NH₄)₃[V₂O₂(O₂)₄)F]·2H₂O entsprechen, wurden zwei neue Typen von Komplexen erhalten: [N(C₂H₅)₄]₂[V₂O_5–x (O₂) _x F₂]·H₂O (x0.25,3) und der erste dreikernige Peroxokomplex von Vanadium(V), [N(C₄H₉)₄]₂[V₃O₃(O₂)₄F₃]·6H₂O (4).

     

Synthesis,structure and thermal decomposition of [Ni(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>][VO(O<Subscript>2</Subscript>)<Subscript>2</Subscript>(NH<Subscript>3</Subscript>)]<Subscript>2</Subscript>

The compound [Ni(NH₃)₆][VO(O₂)₂(NH₃)]₂ was prepared and characterized by elemental analysis and vibrational spectra. The single crystal X-ray study revealed that the structure consists of [Ni(NH₃)₆]²⁺ and [VO(O₂)₂(NH₃)]⁻ ions. As a result of weak interionic interactions V′···O_p (O_p-peroxo oxygen), ([VO(O₂)₂(NH₃)]⁻)₂ dimers are formed in the solid-state. The thermal decomposition of [Ni(NH₃)₆][VO(O₂)₂(NH₃)]₂ is a multi-step process with overlapped individual steps; no defined intermediates were obtained. The final solid products of thermal decomposition up to 600°C were Ni₂V₂O₇ and V₂O₅.