Dual-color upconversion fluorescence and aptamer-functionalized magnetic nanoparticles-based bioassay for the simultaneous detection of Salmonella Typhimurium and Staphylococcus aureus

A sensitive luminescent bioassay for the simultaneous detection of Salmonella Typhimurium and Staphylococcus aureus was developed using aptamer-conjugated magnetic nanoparticles (MNPs) for both recognition and concentration elements and using upconversion nanoparticles (UCNPs) as highly sensitive dual-color labels. The bioassay system was fabricated by immobilizing aptamer 1 and aptamer 2 onto the surface of MNPs, which were employed to capture and concentrate S. Typhimurium and S. aureus. NaY_0.78F₄:Yb_0.2,Tm_0.02 UCNPs modified aptamer 1 and NaY_0.28F₄:Yb_0.70,Er_0.02 UCNPs modified aptamer 2 further were bond onto the captured bacteria surface to form sandwich-type complexes. Under optimal conditions, the correlation between the concentration of S. Typhimurium and the luminescent signal was found to be linear within the range of 10¹–10⁵ cfu mL⁻¹ (R² = 0.9964), and the signal was in the range of 10¹–10⁵ cfu mL⁻¹ (R² = 0.9936) for S. aureus. The limits of detection of the developed method were found to be 5 and 8 cfu mL⁻¹ for S. Typhimurium and S. aureus, respectively. The ability of the bioassay to detect S. Typhimurium and S. aureus in real water samples was also investigated, and the results were compared to the experimental results from the plate-counting methods. Improved by the magnetic separation and concentration effect of MNPs, the high sensitivity of UCNPs, and the different emission lines of Yb/Er- and Yb/Tm-doped NaYF₄ UCNPs excited by a 980 nm laser, the present method performs with both high sensitivity and selectivity for the two different types of bacteria.     

Fluorescence detection of total count of Escherichia coli and Staphylococcus aureus on water-soluble CdSe quantum dots coupled with bacteria

The aim of this paper was to demonstrate a fluorescence measurement method for rapid detection of two bacterial count by using water-soluble quantum dots (QDs) as a fluorescence marker, and spectrofluorometer acted as detection apparatus, while Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were as detection target bacteria. Highly luminescent water-soluble CdSe QDs were first prepared by using thioglycolic acid (TGA) as a ligand, and were then covalently coupled with target bacteria. The bacterial cell images were obtained using fluorescence microscopy. Our results showed that CdSe QDs prepared in water phase were highly luminescent, stable, and successfully conjugated with E. coli and S. aureus. The fluorescence method could detect 10²-10⁷ CFU/mL total count of E. coli and S. aureus in 1-2 h and the low detection limit is 10² CFU/mL. A linear relationship of the fluorescence peak intensity and log total count of E. coli and S. aureus have been established using the equation Y = 118.68X − 141.75 (r = 0.9907).     

Calorimetric investigation of the effect of hydroxyanthraquinones in Rheum officinale Baill on Staphylococcus aureus growth

The inhibitory effects of five hydroxyanthraquinones (HAQs) from root and rhizoma of Rheum officinale Baill, a traditional Chinese medicinal (TCM) herb, on Staphylococcus aureus growth were investigated by calorimetry. The power-time curves of S.aureus with and without HAQ were acquired and the extent and duration of inhibitory effects on the metabolism evaluated by growth rate constants (k₁, k₂), half inhibitory ratio (IC₅₀), maximum heat output (P_max) and peak time (t_p). The value of k₁ and k₂ of S. aureus in the presence of the five HAQs decreased with the increasing concentrations of HAQs. Moreover, P_max was reduced and the value of t_p increased with increasing concentrations of the five drugs. The inhibitory activity varied for different drugs. IC₅₀ of the five HAQs was 4 μg ml⁻¹ for emodin, 3.5 μg ml⁻¹ for rhein, 10 μg ml⁻¹ for aloe-emodin, 1000 μg ml⁻¹ for chrysophanol, 1600 μg ml⁻¹ for physcion. The sequence of antimicrobial activity of the five HAQs: rhein > emodin > aloe-emodin > chrysophanol > physicion.     

Light scattering sensing detection of pathogens based on the molecular recognition of immunoglobulin with cell wall-associated protein A

In this contribution, we report a rapid optical detection method of pathogens using Staphylococcus aureus (S. aureus) as the model analyte based on the molecular recognition of immunoglobulin with cell wall-associated Protein A (SpA). It was found that the molecular recognition of human immunoglobulin (IgG) with protein A on the cell wall of S. aureus on glass slide sensing area could result in strong surface enhanced light scattering (SELS) signals, and the SELS intensity (ΔI) increases proportionally with the concentration of S. aureus over the range of 2.5 × 10⁵-1.0 × 10⁸ CFU mL⁻¹ with right angle light scattering (RALS) signals detection mode. In order to identify the solid support based molecular recognition between IgG with SpA, we also employed water-soluble CdS quantum dots (CdS-QDs) as a fluorescent marker for IgG by immobilizing the IgG onto the surfaces of CdS-QDs through covalent binding in order to generate recognition probes for SpA on the cell wall of S. aureus. Consequently, the fluorescent method also showed that the detection for pathogens with solid supports is reliable based on the molecular recognition of IgG with SpA.     

Electrochemical immunosensor designs for the determination of Staphylococcus aureus using 3,3-dithiodipropionic acid di(N-succinimidyl ester)-modified gold electrodes

The preparation of novel Staphylococcus aureus (S. aureus) amperometric immunosensing designs based on the covalent immobilization of RbIgG at gold electrodes using the heterobifunctional cross-linker 3,3-dithiodipropionic acid di(N-succinimidyl ester) (DTSP), are reported. Two different competitive immunosensing configurations have been tested and compared. In the first one, protein A-bearing S. aureus cells and HRP-labelled antiRbIgG compete for immobilized RbIgG binding sites, while in the second case HRP-labelled protein A was used. In both cases, the evaluation of the developed immunosensors performance was accomplished through the monitoring at 0.00 V (vs. Ag/AgCl) of the catalytic current originated after addition of hydrogen peroxide, using tetrathiafulvalene as redox mediator entrapped at the modified electrode surface by cross-linking with glutaraldehyde. Optimization of variables concerning the composition of the immunosensors as well as the detection conditions was carried out in 0.1 M NaAc/0.1 M NaCl buffer of pH 5.6. The configuration that employed antiRbIgG-HRP resulted in better analytical characteristics, with a detection limit of 1.4 × 10⁴ cells mL⁻¹ for S. aureus cells submitted to wall lyses by ultrasonic treatment. This immunosensor design was also evaluated using gold screen-printed electrodes in order to reduce the analysis time and cost. In this case, a limit of detection of 3.7 × 10² cells mL⁻¹ and a dynamic range from 1.3 × 10³ to 7.6 × 10⁴ cells mL⁻¹ was obtained. A RSD value of 10.5% was found for the responses to 9.6 × 10³S. aureus cells mL⁻¹ obtained with seven different Au/SPEs-immunosensors. These disposable immunosensors were applied to the quantification of S. aureus in milk spiked at two concentration levels, 1.2 × 10³ and 4.8 × 10³ cells mL⁻¹, with good recoveries.     

A DNA-based piezoelectric biosensor: strategies for coupling nucleic acids to piezoelectric devices

A DNA-based piezoelectric biosensor has been here studied in terms of probe immobilisation and DNA sample pre-treatment. The biosensor is specific for the detection of the mecA gene of methicillin-resistant Staphylococcus aureus (MRSA).Methicillin-resistant S. aureus is responsible of several infections in humans, like pneumonia, meningitis and endocarditic. MRSA is also a major cause of hospital-acquired infections worldwide. The antibiotics resistance is conferred by the gene mecA, codifying for an anomalous protein.Two different immobilisation procedures of the probe specific for mecA gene are reported: immobilisation via streptavidin-biotin interaction and direct immobilisation of thiolated probes.After the study with synthetic oligonucleotides, the system has been applied to the analysis of bacterial DNA from MRSA, amplified by polymerase chain reaction. These samples were pre-treated with two different denaturation procedures and the performances of the sensor in the two cases were compared.The two immobilisation methods and denaturation protocols were here used to study the influences of these parameters on the performances of the sensor, applied here to the detection of the mecA gene. Better results in terms of sensitivity and reproducibility were obtained when using the biotinylated probe and the PCR-amplified samples treated by a denaturation procedures involving the use of high temperature and blocking oligonucleotides.     

Use of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide for rapid detection of methicillin-resistant Staphylococcus aureus by resonance light scattering

A rapid detection of methicillin-resistant Staphylococcus aureus (MRSA) using resonance light scattering (RLS) on an ordinary fluorescence spectrometer was developed. The viable MRSA reduced 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) to produce insoluble particles which displayed intense resonance scattering light. It showed a linear relationship between the number of viable MRSA and the RLS intensity. Dead MRSA were unable to reduce MTT. MRSA exposed to flavonoids extracted from Marchantia convoluta (MCF) showed a MCF concentration-dependent inhibition of the ability to reduce MTT. The RLS could, in combination with the MTT assay, be a rapid and sensitive detection method for vitro-cultured MRSA.     

Fluorimetric detection of pathogenic bacteria using magnetic carbon dots

A novel and facile approach of pathogenic bacteria detection, which utilizes fluorescent sensing and bacteria capture with Magnetic carbon dots (Mag-CDs), was proposed in this work. Magnetic nanoparticles were synthesized and then decorated with C-dots, and further functionalized with amine groups (chitosan). In this way, bacteria were strongly anchored on the hybrid material Mag-CDs for highly sensitive fluorescent detection. The Mag-CDs were characterized by UV–vis, FT-IR spectra, TEM images, XRD, and EDX. The characterizations validate the fabrication of amine-Mag-CDs and the promising applications of this material. Fluorescence spectroscope and MALDI-MS were used for the detection and identification of bacterial strains, respectively. The limit of detection for Staphylococcus aureus and Escherichia coli was found to be 3 × 10² and 3.5 × 10² cfu mL⁻¹, respectively. With these encouraging results, it is expected that it would open revenues for promising applications of Mag-CDs nanomaterial.     

An immunochemical strategy based on peptidoglycan synthetic peptide epitopes to diagnose Staphylococcus aureus infections

The characteristic pentaglycyl cross-bridge of the Staphylococcus aureus peptidoglycan (PG) cell wall component is an attractive epitope to raise specific antibodies against this microorganism. Based on this approach, we report here for the first time a competitive ELISA able to detect S. aureus down to 10⁴ CFU mL⁻¹, without pre-enrichment on cell culture. The antibodies were raised against peptide-protein bioconjugates prepared by covalently coupling peptide haptens (PSau6 and PSau8) designed and synthesized taking into consideration the complex tridimensional structure in the PG polymer. Deglycosylation of the PG under acidic conditions has found to increase assay detectability. Assay performance has been evaluated in clinical samples such as bronchoalveolar lavage (BAL) and bronchoalveolar endotracheal aspirates (BAS) showing promising results for further implementation of this immunoassay as a daily routine diagnostic tool. Cross-reactivity studies have demonstrated that the immunoassay is specific for S. aureus.     

Theoretical study of the thermochemistry and the kinetics of the SFxCl (x = 0-5) series

A systematic thermodynamic and kinetic study of the entire SF_xCl (x = 0-5) series has been carried out. High-level quantum chemical composite methods have been employed to derive enthalpy of formation values from calculated atomization and isodesmic energies. The resulting values for the SCl, SFCl, SF₂Cl(C₁), SF₃Cl(C_s), SF₄Cl(C_s) and SF₅Cl molecules are 28.0, −36.0, −64.2, −134.3, −158.2 and −237.1 kcal mol⁻¹. A comparison with previous experimental and theoretical values is presented. Statistical adiabatic channel model/classical trajectory, SACM/CT, calculations of selected complex-forming and recombination reactions of F and Cl atoms with radicals of the series have been performed between 200 and 500 K. The reported rate coefficients span over the normal range of about 6 × 10⁻¹² and 5 × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ expected for this type of barrierless reactions.     

Catalytic adsorptive stripping voltammetry versus electrothermal atomic absorption spectrometry in the determination of trace cobalt and chromium in human urine

Two methods of the determination of cobalt and chromium in human urine of non-occupationally exposed populations—highly sensitive catalytic adsorptive stripping voltammetry (CAdSV) and electrothermal atomic absorption spectrometry (ET-AAS)—are evaluated and compared. The CAdSV methods are based on adsorptive accumulation of a cobalt-nioxime (1,2-cyclohexanedione dioxime) or a chromium-DTPA (diethylenetriammine-N,N,N′,N″,N″-pentaacetic acid) complexes on a hanging mercury drop electrode, followed by a stripping voltammetric measurement of the catalytic reduction current of the adsorbed complex in the presence of sodium nitrite in case of cobalt or in the presence of sodium nitrate in case of chromium determination. In the CAdSV procedure UV-photolysis was used for the sample pre-treatment; the ET-AAS determination did not require any separate preliminary decomposition of the analyte urine samples. The accuracy of the procedures was checked by the analysis of commercially available quality control urine samples. The detection limits (3σ) were 0.13 μg l⁻¹ for Co and 0.18 μg l⁻¹ for Cr in ET-AAS determination and 0.007 μg l⁻¹ for Co and 0.002 μg l⁻¹ for Cr in CAdSV measurements. Precision (R.S.D.) was less than 5% for both methods. The study has shown that the CAdSV is a more reliable and sensitive technique for the determination of very low cobalt and chromium contents in urine, the detection of which is not possible when using the AAS technique.     

Development and evaluation of a loop-mediated isothermal amplification method in conjunction with an enzyme-linked immunosorbent assay for specific detection of Salmonella serogroup D

Loop-mediated isothermal amplification in conjunction with enzyme-linked immunosorbent assay (LAMP-ELISA) provides a sensitive, specific and cost-effective method for detection of etiological causes of infections. The present study developed a reliable LAMP-ELISA diagnostic kit for identification of Salmonella serogroup D strains and evaluated its potential use in the detection of Salmonella serovars Enteritidis and Typhi. The LAMP-ELISA assay used a serogroup D/A-specific primer set to amplify a region of the prt gene, followed by hybridization of the digoxigenin-labeled products to a highly specific oligonucleotide probe for exact identification of serogroup D serovars. Among the bacteria tested, a positive reaction was only observed for strains belong to Salmonella serogroup D. The detection limit of the LAMP-ELISA assay was 4 CFU per tube, which was lower than PCR-ELISA assay with the same target gene (50 CFU per tube). Finally, the technique was successfully applied to an artificially contaminated meat sample with a detection limit 10³ CFU mL⁻¹, which was 10 times more sensitive than PCR-ELISA. Overall, the LAMP-ELISA assay could be used as a sensitive alternative method to PCR-ELISA for the specific detection of Salmonella serogroup D serovars in routine food microbiology or clinical laboratories worldwide.     

Migration of bacteria through a monolith

The separation of bacteria by electromigration techniques was a subject of several of our previous papers. This contribution presents the results of investigation of the porosity of the monolithic bed and migration of Staphylococcus aureus cells through it. The gigaporous monolith was thermally synthesized using glycidyl methacrylate, triethylene glycol dimethacrylate and trimethylolpropane trimethacrylate as the monomers in the presence of porogen solvent containing 1-decanol, polyethylene glycol and 2-methoxyethanol. The porous properties were evaluated by inverse size-exclusion chromatography (ISEC) using a wide range of polystyrene standards of different molecular weights. The results have shown, that large pores (ca. 300 nm) dominate in the monolithic bed structure, however much larger flow-through pores must also be present as ca. 1 μm sized S. aureus bacteria were able to migrate through the bed.     

Immunomagnetic separation and rapid detection of bacteria using bioluminescence and microfluidics

This paper describes an immunomagnetic separation of target bacterial cells from others by using magnetic bead. The surface of bead was coated with antibodies which can capture specific organism. The binding efficiency of immunomagnetic bead (IMB) capturing target bacterial cells was higher than 98% when the concentrations of target and interferent bacterial cells were at the same level. The concentration of bacteria was determined indirectly by detecting adenosine 5′-triphosphate (ATP) employing bioluminescence (BL) reaction of firefly luciferin-ATP. Benzalkonium chloride (BAC) was used as an ATP extractant from living bacterial cells. We found that BAC could enhance the light emission when the concentration of BAC was less than 5.3 × 10⁻²% (w/v) and the BL intensity reached its maximum at the concentration of BAC was 2.7 × 10⁻²%, which was 10-fold stronger than that without BAC. Based on the principle of the IMB, a microfluidic chip combined with immunofluorescence assay for separating and detecting bacteria simultaneously was also developed. The IMBs were magnetically fixed in the bead-beds of chip channels with a 3-mm diameter of NdFeB permanent magnet. The target bacterial cells can be captured magnetically and observed by a fluorescent microscope.     

Mineral content and botanical origin of Spanish honeys

Eleven elements (Zn, P, B, Mn, Mg, Cu, Ca, Ba, Sr, Na and K) were determined by inductively plasma coupled spectrometry in 40 honey samples from different places of Spain and four different botanical origins: Eucalyptus (Eucalyptus sp.), Heather (Erica sp.), Orange-blossom (Citrus sinensis) and Rosemary (Rosmarinus officinalis). K, Ca and P show the higher levels with average concentrations ranged between 434.1-1935 mg kg⁻¹ for K; 42.59-341.0 mg kg⁻¹ for Ca and 51.17-154.3 mg kg⁻¹ for P. Levels of Cu (0.531-2.117 mg kg⁻¹), Ba (0.106-1.264 mg kg⁻¹) and Sr (0.257-1.462 mg kg⁻¹) are the lowest in all honey samples. Zn (1.332-7.825 mg kg⁻¹), Mn (0.133-9.471 mg kg⁻¹), Mg (13.26-74.38 mg kg⁻¹) and Na (11.69-218.5 mg kg⁻¹) concentrations were found strongly dependent on the kind of botanical origin.Results were submitted to pattern recognition procedures, unsupervised methods such as cluster and principal components analysis and supervised learning methods like linear discriminant analysis in order to evaluate the existence of data patterns and the possibility of differentiation of Spanish honeys from different botanical origins according to their mineral content. Cluster analysis shows four clusters corresponding to the four botanical origins of honey and PCA explained 71% of the variance with the first two PC variables. The best-grouped honeys were those from heather; eucalyptus honeys formed a more dispersed group and finally orange-blossom and rosemary honeys formed a less distinguishable group.     

Synthesis and analytical application of a novel tetradentate N(2)O(2) Schiff base as a chromogenic reagent for determination of nickel in some natural food samples

A novel sensitive chromogenic reagent, N,N′-bis(3-methylsalicylidene)-ortho-phenylene diamine (MSOPD), has been synthesized and used in the spectrophotometric determination of nickel. At pH 8, MSOPD can react with nickel ion at room temperature to form a 1:1 complex. The apparent molar absorptivity is 9.5 × 10⁴ l mol⁻¹ cm⁻¹ at 430 nm. Beer's low is obeyed over the range 0-1.0 × 10⁻⁵ M of nickel with a detection limit of 1.36 × 10⁻⁸ M. The relative standard deviation for measurement of 3.41 × 10⁻⁶ M nickel is 1.3% (n = 10). The method has successfully been applied to determination of trace amounts of nickel in some natural food samples.     

Synthesis of chloroquinocin, a pyranonaphthoquinone antibiotic against Gram-positive bacteria

Chloroquinocin 1 is an antimicrobial agent against Gram-positive bacteria, including MRSA (methicillin-resistant Staphylococcus aureus). A successful synthesis of 1 was attained through a unique chlorination of the corresponding naphthoquinone derivative 12 as a key step.     

Stabilization of the trivalent oxidation state of copper by tridentate imine–oxime–amine ligands

Two tridentate imine–oxime–amine ligands have been synthesized and their corresponding copper(II) complexes have been isolated. These copper(II) complexes are readily oxidized both chemically and electrochemically to give relatively stable copper(III) complexes. In the pH range 1.5–3.0 the electron transfer process is electrochemically reversible with ΔE_p = 60 mV and i_pa/i_pc ∼ 1. Plots of E_1/2 versus pH are linear with a slope = −60 indicating the involvement of one proton in the electron transfer process. Aqueous solutions of copper(III) complexes have high molar absorption at λ_max with ε > 10⁴ M⁻¹ cm⁻¹. Solid samples of the complexes are diamagnetic consistent with a d⁸ square planar geometry. It seems that only imine–oxime nitrogens are coordinated to copper(II) with the NH₂ group being free as indicated by i.r. spectra. Substitution of a –CH₃ group on the carbon atom adjacent to the oxime group by the more electron donating group –CH(CH₃)₂ lowers electrode potential by more than 90 mV. This is consistent with an earlier observation that electron-donating substituents on the carbon atom adjacent to the oxime group lower the potential of Cu^III/Cu^II couples and stabilize the higher oxidation state.     

Use of bioluminescent bacterial sensors as an alternative method for measuring heavy metals in soil extracts

The luminescence based bacterial sensor strains Pseudomonas fluorescens OS8 (pTPT11) for mercury detection and Pseudomonas fluorescens OS8 (pTPT31) for arsenite detection were used in testing their application in detecting heavy metals in soil extracts. Three different soil types (humus, mineral and clay) were spiked with 1, 100 or 500 μg g⁻¹ Hg²⁺ or As³⁺. Samples were taken 1, 14 and 30 days and extracted with water, ammonium acetate, hydrogen peroxide and nitric acid to represent water soluble, bioavailable, organic matter bound and residual fractions, respectively. The lowest mercury-concentration measured using biosensor (0.003 μg kg⁻¹) was considerably lower than by chemical method (0.05 μg kg⁻¹). The sensor strain with pTPT31 appeared to have a useful detection range similar to that of chemical methods. Concentration results with chemical and biosensor analysis were very similar in the case of mercury-spiked samples. Although some of the arsenite samples showed higher variation between methods, it is concluded that the bacteria can be used as an alternative traditional methods for different types of samples.     

Probing trace Pb(2+) using electrodeposited N,N'-(o-phenylene)-bis-benzenesulfonamide polymer as a novel selective ion capturing film

A novel film modified electrode for the determination of trace lead was developed in this work. The modified electrode was prepared by the electropolymerization of N,N′-(o-phenylene)-bis-benzenesulfonamide (PBSA) as the ion capturing reagent to create the functional film. The modified electrode shows a high selectivity towards Pb²⁺ over interfering cations, e.g. Cu²⁺, Cd²⁺, Co²⁺, Ni²⁺, Zn²⁺, Cr²⁺, and the calibration curve was linear in the concentration range of 2.0 × 10⁻⁹ to 1.0 × 10⁻⁷ M with correlation coefficient of 0.999. For 20 min accumulation, detection limit of 1.0 × 10⁻⁹ M was obtained at the signal to noise ratio of 3. Analytical availability of the modified electrode was demonstrated by the application for samples from pond water.