Cyano-containing ionic liquids for the extraction of aromatic hydrocarbons from an aromatic/aliphatic mixture

Ionic liquids can replace conventional solvents in aromatic/aliphatic extractions, if they have higher aromatic distribution coef- ficients and higher or similar aromatic/aliphatic selectivities. Also physical properties, such as density and viscosity, must be taken into account if a solvent is applied in an industrial extraction process. Cyano-containing ionic liquids have a lower den- sity than the benchmark solvent sulfolane and a higher viscosity. Sulfolane is from a hydrodynamic point of view a better sol- vent than ionic liquids for the aromatic/aliphatic extraction. The most suitable ionic liquids for the extraction of aromatic hy- drocarbons from a mixture of aromatic and aliphatic hydrocarbons are [bmim]C(CN)3, [3-mebupy]N(CN)2, [3-mebupy]C(CN)3, [3-mebupy]B(CN)4 and [mebupyrr]B(CN)4. They have factors of 1.2-2.3 higher mass-based distribution coefficients than sul- folane and a similar or higher, up to a factor of 1.9 higher, aromatic/aliphatic selectivity than sulfolane. The IL [3-mebupy]N(CN)2 is a better extractant for the separation of toluene from a mixture of toluene/n-heptane in a pilot plant Ro- tating Disc Contactor (RDC) than sulfolane.     

Samarium diiodide-catalyzed diastereoselective pinacol couplings

A complex of samarium diiodide (SmI(2)) with tetraglyme catalyzes the intermolecular pinacol coupling of aromatic or aliphatic aldehydes at loadings of 10 mol % in the presence of Me(2)SiCl(2) and Mg. Diastereoselectivity of up to 95/5 (+/-/meso) has been achieved for aliphatic aldehydes and up to 19/81 (+/-/meso) for aromatic aldehydes. De values of up to 99% have been achieved in intramolecular pinacol coupling reactions using the SmI(2)/tetraglyme/Mg/Me(2)SiCl(2) catalytic system.     

Microwave-mediated one step synthesis of tri- and tetracyclic heterocyclic molecules

Abstract

Tricyclic and tetracyclic compounds related to vasicine and batracyclin, respectively, have been synthesized via condensation of dicarboxylic acids (aliphatic acid, homophthalic acid, and aromatic acid) with diamines (aliphatic, aminobenzyl amine, and aromatic amine) under solvent-free condition.     

Direct synthesis of esters and amides from unprotected hydroxyaromatic and -aliphatic carboxylic acids

A facile method for the activation of hydroxy-substituted carboxylic acids using benzotriazole chemistry without prior protection of the hydroxy substituents is presented. The N-acylbenzotriazole intermediates 2a-g, 6a-d, and 9a-c have been used for high-yielding synthesis of both aliphatic (3a-l) and aromatic (7a-h, 10a-f) hydroxy carboxamides. High yields of aromatic hydroxy esters 12a-h and 13a-i were obtained using either neat alcohols in neutral microwave conditions or nucleophilic alkoxides and the intermediate N-(arylacyl)benzotriazoles. Moderate yields were obtained in the case of aliphatic hydroxy esters 11a,b and thiolesters 11e-g from the intermediates 2a-c.     

Crosslinked Polystyrene Beads Modified with Sulfonyl Groups and Their Application in Aromatic/Aliphatic Hydrocarbons Separation

The separation of aromatic hydrocarbons from aromatic/aliphatic mixtures was investigated with cross- linked polystyrene（CPS） beads modified with sulfonyl groups. Three sulfonating agents, i.e. benzenesulfonyl chlo- ride（BsCl）, 4-toluene sulfonyl chloride（TsC1） and methanesulfonyl chloride（MsC1） were used to prepare sulfonyl CPS beads by Friedel-Crafts reaction. The CPS beads modified with BsC1 exhibited higher sulfonation rate than those modified with MsC1 and TsCI and obtained optimum selectivity in the experiments of toluene/n-heptane separation. Further separation tests with various other aromatic/aliphatic mixtures were carried out at an initial aromatic concen- tration of 13%（mass fraction） with the results showing that the modified beads have preferential selectivity for aro- matic hydrocarbons in all aromatic/aliphatic mixtures, and especially a separation factor of 8.21 and a swelling ratio of 30% for toluene/cyclohexane system. The thermal stability and regeneration test indicate that the used polystyrene beads can be recovered through heat-drying and reused effectively.     

Synthesis and Reactivity of Aliphatic and (Hetero) Aromatic N-Alkyl-N-(Diphenyloxophosphinyl) Methyl Carboxamides and Lactams

A variety of aliphatic, aromatic and heteroaromatic N-alkyl-N-(diphenyloxophosphinyl) methyl carboxamides and lactams have been prepared by preliminar chloromethylation of the appropriate secondary amides and subsequent treatment with ethyl diphenylphosphinite.     

Asymmetric diethylzinc addition and phenyl transfer to aldehydes using chiral cis-cyclopropane-based amino alcohols

A new series of amino alcohols with a chiral cyclopropane backbone have been developed and used in the catalytic asymmetric diethylzinc addition and phenyl transfer to various types of aldehydes. These cyclopropane-based chiral amino alcohols show high enantioselectivity in the addition of organozincs to aromatic and aliphatic aldehydes. For diethylzinc addition to aromatic and aliphatic aldehydes, up to 97% ee and 93% ee are obtained, respectively. For the phenyl transfer to aromatic aldehydes, the best enantioselectivity was 89% ee.     

Indium tri(isopropoxide)-catalyzed selective Meerwein-Ponndorf-Verley reduction of aliphatic and aromatic aldehydes

Indium tri(isopropoxide)-catalyzed Meerwein-Ponndorf-Verley reduction of aliphatic and aromatic aldehydes in 2-propanol gave selectively the corresponding primary alcohols in good to excellent yields at room temperature. A wide range of functional groups including alkene, ether, ketone, ester, nitrile, and nitro were tolerated under the optimum reaction conditions. Chemoselective reductions were also achieved not only between aromatic aldehyde, aromatic ketone, and epoxide but also between aliphatic aldehyde and alkene.     

Regular Copolyamides. III. Preparation and Characterization of Regular Aliphatic/Aromatic Copolyoxamides

Regular aliphatic/aromatic copolyoxamides were prepared from diamine-oxamides and aromatic diacid chlorides by interfacial and solution polymerization. Solution polymerization in chloroform or dimethylacetamide is preferred for the preparation of large quantities of polymers but interfacial polymerization is most conveniently carried out for the preparation of polymers with high molecular weight. Aromatic diacid chlorides used included the diacid chlorides of terephthalic acid, isophthalic acid, 2,6-pyridinedicarboxylic acid, two isomeric naphthalene dicarboxylic acids, two cyclo-hexanedicarboxylic acid isomers, as well as 1,1-cyclobutane-dicarboxylic acid. Copolymers of diamine-oxamides with mixtures of acid chlorides of isophthalic and pyridine dicarboxylic acid and isophthalic acid/tetrachloroterephthalic acid have also been prepared. Most polymers are film-forming and are soluble in concentrated sulfuric acid, trifluoroacetic acid, and dimethylacetamide (containing several per cent LiCl). A number of these polymers gave dense or asymmetric membranes, particularly the polymers from ethylene diamine as the aliphatic diamine, particularly poly(iminoethyleneimino-oxalyliminoethyleneiminoisophthaloyl) (p-222I). Diamine oxamides with more than two amide groups in the molecules have been prepared, and in one case polymers with aromatic diacid chlorides have been prepared by interfacial polymerization. All regular aliphatic/aromatic copolyoxamides are high-melting and generally decompose above 350°C without melting. They can, however, be fabricated from solution into brittle fibers or into desalination membranes.     

Transition-Metal-Free Superbase-Promoted Stereoselective α-Vinylation of Ketones with Arylacetylenes: A General Strategy for Synthesis of β,γ-Unsaturated Ketones

A wide variety of β,γ-unsaturated ketones of E configuration have been obtained in good to excellent yields via KO(t)Bu/DMSO promoted α-vinylation of aliphatic, cycloaliphatic, and alkyl aromatic (heteroaromatic) ketones with diverse arylacetylenes.     

Photodegradation of UV-cured coatings II. Polyurethane–acrylate networks

Highly crosslinked aliphatic and aromatic polyurethane-acrylate (PUA) coatings have been obtained by photopolymerization of multifunctional monomers. The discoloration and chemical modifications occurring upon accelerated QUV aging were monitored by UV and IR spectroscopy. The polymers were found to undergo photooxidation and loss of carbamate and phenyl groups, with lower quantum yields (10^?3 mol photon^?1) than in related linear polymers. Hydroxy-phenyl benzotriazole UV-absorbers have a limited effect on the degradation rate, at the concentration used (0.5%). Hindered amines (HALS) are substantially more effective, especially in aliphatic PUA. A 20-fold increase in the stabilization efficiency was found with the UVA + HALS combination. Aromatic PUA are more difficult to stabilize, because of the strong absorption and photolysis of the phenyl group which yields colored products. Radical-induced oxidation is predominant in aliphatic PUA and develops with long kinetic chains, while in aromatic PUA it competes with direct photolysis.     

A simple radical addition-elimination route to geometrically pure (E)-alkene and chromanone derivatives via beta-nitrostyrene

Various geometrically pure (E)-beta-alkyl-styrenes have been synthesized by the radical NO(2) substitution of alkyl moieties generated via hydrogen abstraction followed by decarbonylation from aliphatic aldehydes. These reactions, which involve a high chemical selectivity and regioselectivity constitute a new route to (E)-beta-alkylstyrenes. Both aliphatic and aromatic aldehydes can be used in this novel reaction. When 2-allyloxybenzaldehyde was used, the benzoyl radical added directly to the double bond without decarbonylation to give the 3-cinnamylchroman-4-one. This unique difference between aliphatic and aromatic aldehydes represents a simple route for the synthesis of biologically important chromanones.     

Polythioamides aromatiques: Synthese et etude des comportements thermique et ensolution

Aromatic polythioamides are obtained by polycondensation of alkyl and/or carboxymethyl bis(dithioesters) with aromatic or aliphatic diamines in aqueous or organic solvents. We have identified the effect of aromatic rings on the behaviour of polymer in solution and thermal features on these condensation polymers. Their thermal stability is improved over that of aliphatic compounds, especially when the ring and the functional groups are conjugated.     

Poly(thioester)s

Syntheses and properties of aliphatic and aromatic polythioesters (PTEs) were reviewed including polythiocarbonates and polythiourethanes. The content is subdivided into the following sections: PTEs of aliphatic α‐mercapto carboxylic acid, PTEs of ω‐mercapto carboxylic acids, PTEs derived from α,ω‐dimercapto alkanes, aromatic poly(thioester)s, aliphatic poly(thiocarbonate)s, aliphatic poly(thiourethane)s and aromatic polythiocarbonates. The synthetic strategies reviewed in this article include anionic and cationic ring‐opening polymerizations, polycondensations in bulk, polycondensations in solutions, interfacial polycondensations and in vitro enzymatic polycondensations.     

High-load, soluble oligomeric carbodiimide: synthesis and application in coupling reactions

A facile preparation of a high-load, soluble oligomeric alkyl cyclohexylcarbodiimide (OACC) reagent via ROM polymerization from commercially available starting materials is described. This reagent is exploited as a coupling reagent for esterification, amidation, and dehydration of carboxylic acids (aliphatic and aromatic) with an assortment of alcohols (aliphatic primary, secondary, and benzylic), thiols, phenols, and amines (aliphatic primary, secondary, benzylic, and aromatic/anilines), respectively. Following the coupling event, precipitation with an appropriate solvent (Et(2)O, MeOH, or EtOAc), followed by filtration through a SPE provides the products in good to excellent yield and purity.     

Ion-chromatographic selectivity of polyelectrolyte sorbents based on some aliphatic and aromatic ionenes

An aliphatic ionene with hydroxyl group (2HP-8 ionene), mixed aliphatic-aromatic ionenes (3-X and 6-X ionenes), aromatic ionene (Ph-X ionene), and viologen (Dp-X ionene) - polymers with quaternary nitrogen atoms in the main chain served as modifiers in synthesising polyelectrolyte sorbents for ion chromatography. The selectivity of produced and several previously prepared anion exchangers was compared with those of aliphatic ionenes. It was found that aromatic ionenes having a rigid structure of polymer chains are similar to their aliphatic analogues with shorter chains with a high charge density. Polyelectrolyte sorbents based on aromatic ionenes show higher selectivity to aromatic acids (e.g., 1-naphthalenesulfonic acid) as compared with aliphatic ionenes due to specific pi-pi interactions.     

磺酰化修饰聚苯乙烯的合成及芳香烃萃取性能简

利用自由基聚合反应合成了低分子量聚苯乙烯,经过端基氧化和磺酰化反应,制备出一系列极性砜基修饰的低分子量聚苯乙烯. 通过红外光谱(FTIR)、核磁共振谱(NMR)、差示扫描量热分析(DSC)以及热重分析(TGA)等手段对聚合物的结构和性能进行了表征,并通过混合烃萃取分离实验对其芳香烃选择性进行了测试. 结果表明,随着磺化比例的增加,甲苯的选择系数和分布系数均显著提高,表明极性修饰聚苯乙烯对多种芳香烃/链烷烃混合物均具有明显的芳香烃选择性.     

Thermally stable polymers containing 1,3,4-oxadiazole units obtained from Huisgen reaction

Thermally stable polymers containing 1,3,4-oxadiazole units have been synthesized through Huisgen reaction of the aromatic/aliphatic bis-tetrazole compounds with the aromatic/aliphatic bis-acid chlorides in pyridine as solvent.The obtained polymers are insoluble or slightly soluble even in polar aprotic solvents such as DMSO and DMF.Relatively high inherent viscosity values（0.61-1.33 dL/g,in 0.125%H₂SO₄ at 25℃） were observed for these compounds.Thermal analyses of the polymers using DSC and TGA techniques showed that the polymers have improved thermal stabilities.The glass transition temperature has not been observed in the fully aromatic polymers,but the polymers obtained from 5-[6-（1H-tetrazol -5-yl）hexyl]-lH-tetrazole（Ⅳ） showed very clear T_g.A model reaction was also investigated and the resulting bis-1,3,4-oxadiazole compound was characterized by conventional spectroscopy methods.     

Homogeneous ion-exchange membranes of improved flexibility

Poly(styrenesulfonic acid) ion-exchange membranes having various degrees of porosity and flexibility have been prepared by using aliphatic and aromatic esters of p-styrenesulfonic acid. The membranes formed from the aliphatic ester monomers were found to exhibit an increase in water uptake, permeability, and flexibility with increase in the size of the alcohol group of the ester monomer. With membranes formed from the phenyl and β-naphthyl ester monomers the reverse trend was indicated. The flexibility of the membranes formed from the aromatic ester monomers was much greater than that obtained with the aliphatic esters.     

Effect of catalytic alkali metal bromide on Hofmann-type rearrangement of imides

The Hofmann-type rearrangement of aromatic and aliphatic imides using KBr as the catalyst proceeded to provide aromatic and aliphatic amino acid derivatives. We have also developed a new synthetic route to gabapentin with this method.