Pressure effect on structural,electronic and thermodynamic investigations of europium filled skutterudite EuFe4Sb12: LDA and LSDA approximations

Numerical calculations based on the full potential muffin-tin orbitals method (FP-LMTO) within the local density approximation (LDA) and the local spin-density approximation (LSDA) to investigate the structural, electronic and thermodynamic properties of filled skutterudite EuFe₄Sb₁₂ are presented. The electronic band structure and density of states profiles prove that this material is a conductor. The present investigation is also extended to the elastic constants, such as the bulk modulus B, anisotropy factor A, shear modulus G, young's modulus E, Poisson's ratio ν, and the B/G ratio with pressure in the range of 0–40 GPa. The sound velocities and Debye temperatures are also predicted from the above constants. The variations of the primitive cell volume, expansion coefficient α, bulk modulus B, heat capacity (C_p and C_v), Debye temperature θ_D, Helmholtz free energy A, Gibbs free energy G, entropy S, and internal energy U with pressure and temperature in the range 0–3000 K are calculated successfully.     

Thermodynamic,elastic, elastic anisotropy and minimum thermal conductivity of β-GaN under high temperature

The thermodynamic, elastic, elastic anisotropy and minimum thermal conductivity of β-GaN are investigated at ambient pressure and high temperature by using first-principles calculations method with the ultrasoft psedopotential scheme. The elastic constants calculations reveal β-GaN is mechanically stability at ambient pressure and high temperature. The elastic modulus (Poisson's ratio, shear modulus and Young's modulus) decreases with increasing temperature. The calculations of anisotropy show that β-GaN has a larger elastic anisotropy in Poisson's ratio, shear modulus, Young's modulus and Zener anisotropy index. In addition, when the temperature increases from 0 to 1500 K, the elastic anisotropy decreases for β-GaN. The quasi-harmonic Debye model is successfully applied to determine the thermodynamic properties at different pressures and temperatures. Using the quasi-harmonic Debye model, the thermodynamic properties including the Debye temperature, Grüneisen parameter, the heat capacity, adiabatic bulk modulus, and the thermal expansion coefficients of β-GaN are predicted under high temperature and high pressure.     

First principles study on the structural, electronic, and elastic properties of Na-As systems

We have performed the first principles calculation by using the plane-wave pseudopotential approach with the generalized gradient approximation for investigating the structural, electronic, and elastic properties Na-As systems (NaAs in NaP, LiAs and AuCu-type structures, NaAs₂ in MgCu₂-type structure, Na₃As in Na₃As, Cu₃P and Li₃Bi-type structures, and Na₅As₄ in A₅B₄-type structure). The lattice parameters, cohesive energy, formation energy, bulk modulus, and the first derivative of bulk modulus (to fit to Murnaghan’s equation of state) of the related structures are calculated. The second-order elastic constants and the other related quantities such as Young’s modulus, shear modulus, Poisson’s ratio, sound velocities, and Debye temperature are also estimated.     

Temperature derivatives of the bulk modulus of ZrB2 calculated by using the pressure derivative of the bulk modulus

The temperature dependence of the bulk modulus of ZrB₂ above room temperature was calculated by using the equations by Garai and Laugier (J. Appl. Phys. 101 (2007) p.023514) and Lawson and Ledbetter (Philos Mag. 91 (2011) p.1425). The present calculations involve the accurate data for pressure derivative of the bulk modulus for the Anderson–Grüneisen parameter in addition to the other experimental parameters involved. It is interesting to note that the cited equations derived by different thermodynamic approaches give almost equivalent values for the temperature dependencies of the bulk modulus of ZrB₂. The present results for the temperature derivatives of the bulk modulus of ZrB₂ vary from ?0.016?GPa/K at 300–400?K to ?0.022?GPa/K at 1500–1600?K, being in good agreements with the corresponding experimental values.     

Electronic structure,elastic and thermodynamic properties of α-phase Na3N under pressure from first principles

The structural, electronic, elastic and thermodynamic properties of α-phase Na₃N under pressure are investigated by performing first principles calculations within generalized gradient approximation. The elastic constants, bulk modulus, shear modulus, Young's modulus, and Poisson's ratio dependencies on pressure are also calculated. The thermodynamic properties of the α-phase Na₃N are calculated using the quasi-harmonic Debye model. The dependencies of the heat capacity and the thermal expansion coefficient, as well as the Grüneisen parameter on pressure and temperature are investigated systematically in the ranges of 0–1 GPa and 0–100 K.     

Elastic properties of mono- and polycrystalline ( and Lu) under pressure effect

The structural and elastic properties of perovskite-type RCRh₃, with R=Sc, Y, La and Lu, under pressure effects have been investigated using the pseudo-potential plane-wave method based on the density functional theory within the generalized gradient approximation. For monocrystalline RCRh₃, the optimized lattice constants, elastic constants and directional elastic wave velocities are calculated and analyzed in comparison with the available experimental and theoretical data. An increase in the lattice constant has been found with increasing atomic size of the R element and a corresponding decrease in the hardness. The anisotropic elastic constants and directional elastic wave velocities increase linearly with increasing pressure. A set of elastic parameters and related properties, namely bulk and shear moduli, Young’s modulus, Poisson’s ratio, Lamé’s coefficients, average sound velocity and Debye temperature are predicted in the framework of the Voigt–Reuss–Hill approximation for polycrystalline RCRh₃. We have found that the toughness of RCRh₃ compounds can be improved at high pressure.     

DFT study of structural,electronic and elastic properties of two polymorphs of monoclinic CsGaQ2 (Q = S,Se)

In this paper, we report an ab-initio calculations of the structural, electronic and elastic properties of monoclinic CsGaQ₂ (Q?=?S, Se) crystals in two polymorphs CsGaQ₂-mC64 and CsGaQ₂-mC16 (Q?=?S, Se). The investigation is done using the pseudo-potential plane-wave (PP-PW) method combined to the generalized gradient approximation (GGA) within the density functional theory (DFT). The calculated equilibrium lattice constants (a, b and c), angle β are in good agreement with the available experimental data. We have calculated and analyzed the energy gap, band structure and density of states. The electronic structure calculation demonstrates that crystals are direct-gap semiconductors. The single-crystal elastic constants C_ij of CsGaQ₂-mC16 are predicted, for the first time, using the stress–strain method. The polycrystalline bulk modulus B, shear modulus G, Young's modulus E, Poisson's ratio?ν, and elastic anisotropy A^U are determined based on the predicted C_ij. Our results indicate that CsGaQ₂ (Q?=?S, Se) can be classified as brittle materials.     

Theoretical study of the structural, elastic, electronic and thermal properties of the MAX phase Nb2SiC

Structural, elastic, electronic and thermal properties of the MAX phase Nb₂SiC are studied by means of a pseudo-potential plane-wave method based on the density functional theory. The optimized zero pressure geometrical parameters are in good agreement with the available theoretical data. The effect of high pressure, up to 40 GPa, on the lattice constants shows that the contractions along the c-axis were higher than those along the a-axis. The elastic constants C_ij and elastic wave velocities are calculated for monocrystal Nb₂SiC. Numerical estimations of the bulk modulus, shear modulus, Young’s modulus, Poisson’s ratio, average sound velocity and Debye temperature for ideal polycrystalline Nb₂SiC aggregates are performed in the framework of the Voigt-Reuss-Hill approximation. The band structure shows that Nb₂SiC is an electrical conductor. The analysis of the atomic site projected densities and the charge density distribution shows that the bonding is of covalent-ionic nature with the presence of metallic character. The density of states at Fermi level is dictated by the niobium d states; Si element has a little effect. Thermal effects on some macroscopic properties of Nb₂SiC are predicted using the quasi-harmonic Debye model, in which the lattice vibrations are taken into account. The variations of the primitive cell volume, volume expansion coefficient, bulk modulus, heat capacity and Debye temperature with pressure and temperature in the ranges of 0-40 GPa and 0-2000 K are obtained successfully.     

First-principles study of elastic and electronic properties of layered ternary nitride SrZrN2 under pressure

The structural, elastic, and electronic properties of SrZrN₂ under pressure up to 100?GPa have been carried out with first-principles calculations based on density functional theory. The calculated lattice parameters at 0?GPa and 0?K by using the GGA-PW91-ultrasoft method are in good agreement with the available experimental data and other previous theoretical calculations. The pressure dependence of the elastic constants and the elastic-dependent properties of SrZrN₂, such as bulk modulus B, shear modulus G, Young's modulus E, Debye temperature Θ, shear and longitudinal wave velocity V_S and V_L, are also successfully obtained. It is found that all elastic constants increase monotonically with pressure. When the pressure increases up to 140?GPa, the obtained elastic constants do not satisfy the mechanical stability criteria and a phase transition might has occurred. Moreover, the anisotropy of the directional-dependent Young's modulus and the linear compressibility under different pressures are analysed for the first time. Finally, the pressure dependence of the total and partial densities of states and the bonding property of SrZrN₂ are also investigated.     

First-principles calculations of structural stability and mechanical properties of tungsten carbide under high pressure

The structural stability and mechanical properties of WC in WC-, MoC- and NaCl-type structures under high pressure are investigated systematically by first-principles calculations. The calculated equilibrium lattice constants at zero pressure agree well with available experimental and theoretical results. The formation enthalpy indicates that the most stable WC is in WC-type, then MoC-type finally NaCl-type. By the elastic stability criteria, it is predicted that the three structures are all mechanically stable. The elastic constants C_ij, bulk modulus B, shear modulus G, Young?s modulus E and Poisson?s ratio ν of the three structures are studied in the pressure range from 0 to 100 GPa. Furthermore, by analyzing the B/G ratio, the brittle/ductile behavior under high pressure is assessed. Moreover, the elastic anisotropy of the three structures up to 100 GPa is also discussed in detail.     

Structural studies on Na0.75CoO2 thermoelectric material at high pressures

The crystal structure of Na_0.75CoO₂ was studied at ambient and low temperatures down to 10 K at pressures up to 40 GPa using synchrotron x-rays and a diamond cell in angle dispersion geometry. A reduction in the c/a ratio was observed at both conditions with the application of pressure. An increase in Co–O bond lengths and a decrease in Na–O bond lengths were observed above 10 GPa. The results of the density functional calculations performed agree well with the pressure induced bond length changes. The anomalous change in the c/a ratio and bond lengths indicate a pressure induced isostructural phase transition above 10 GPa. Bulk modulus calculations show this compound is less compressible than its hydrated analogues.     

First-principles investigation of the equation of state and elastic properties of perovskite-type SrW(O,N)<Subscript>3</Subscript> under hydrostatic pressures up to 139 GPa

Pressure dependence of the structural and elastic properties of perovskite-type cubic SrWO_2.05N_0.95 was studied using firstprinciples density functional theory (DFT) utilizing the plane wave pseudopotential and the exchange-correlation functionals within the generalized gradient approximation. The estimated bulk modulus and its pressure derivative values from the P ? V data fitted to the third-order Birch-Murnaghan equation of state were close to the data obtained from the independent elastic constants. Based on the generalized Born stability criteria, SrWO_2.05N_0.95 is mechanically stable up to 139 GPa. The influence of hydrostatic pressure (0 to 139 GPa) on the bulk modulus, shear modulus, Young’s modulus, Pugh’s modulus ratio, Poisson’s ratio, Vickers hardness, sound velocities, Debye temperature, Debye-Grüneisen parameter, minimum thermal conductivity and elastic anisotropy of SrWO_2.05N_0.95 was particularly studied in detail. It was found that SrWO_2.05N_0.95 is a ductile and hard solid with large bulk, shear and Young’s modulus and displays an extraordinary low thermal conductivity. Since there are not any experimental or theoretical data available for comparison the results of the present study have revealed an important fundamental information about the elastic properties of perovskite-type cubic SrWO_2.05N_0.95 for future experimental studies.     

Relation between the Grüneisen ratio and the pressure dependence of Poisson's ratio for metals

The Grüneisen ratio of crystalline solids is shown to be dependent on a parameter n whose values are characteristic of each solid, and can be determined by two independent ways: from experimental shock data and from the pressure derivative of Poisson's ratio. The determinations are made for several metals, using data on the pressure derivatives of polycrystalline elastic moduli or of the second order elastic constants measured on single crystals, and giving the pressure derivatives of Poisson's ratio by means of the Voigt-Reuss-Hill averaging procedure. The values of the parameter n deduced from shock data are found to be in good agreement with those deduced from the pressure derivatives of Poisson's ratio. Positive and negative values of parameter n correspond respectively to increasing and decreasing Poisson's ratio with increasing pressure. Discussion of the results is made using the linear and the quadratic relationships between shock velocity and particle velocity. It is shown that shock wave data cannot yield directly an accurate estimation of the derivative of the initial slope of the Hugoniot.     

First-principles study on electronic structure and elastic properties of Fe16N2

We have performed first-principles study on structural stability, elastic properties and electronic structure of Fe₁₆N₂ by applying LSDA+U method. The calculated values of formation energy and reaction enthalpy for decomposition reaction indicate that Fe₁₆N₂ is a thermodynamically stable phase at the ground state. The six independent elastic constants are derived and the bulk modulus, Young's modulus, shear modulus, and Poisson's ratio are determined as 180 GPa, 199 GPa, 76 GPa and 0.32, respectively. The elastic constants meet all the mechanical stability criteria. The ductility of Fe₁₆N₂ is predicted by Pugh's criterion. The strong bonding between Fe and N atoms results in high values of elastic constants C₁₁ and C₃₃, and contributes to the strengthening of the Fe₁₆N₂ structural stability. The total and partial densities of states (DOS) suggest the existence of hybridization between N-p and Fe-d bands. The position of the Fermi level in DOS curve implies that Fe₁₆N₂ is a metastable phase.     

Ab initio calculation of the static structural properties of Be

An ab initio calculation of the static structural properties of Be is presented. The total structural energy is calculated using pseudopotentials and the local density-functional formalism with the atomic number as the only input. The lattice constant, Poisson's ratio, and the bulk modulus are predicted by calculating the total energy of the system. The deviations of the calculated results for lattice constants c, a, and c/a are approximately 1% when compared with experimental results. Poisson's ratio and the bulk modulus are also in reasonably good agreement with the measured values.     

Full potential calculation of structural, elastic properties and high-pressure phase of binary noble metal carbide: ruthenium carbide

We present in this paper the results of an ab initio theoretical study within the local density approximation (LDA) to determine in rock-salt (B1), cesium chloride (B2), zinc-blende (B3), and tungsten carbide (WC) type structures, the structural, elastic constants, hardness properties and high-pressure phase of the noble metal carbide of ruthenium carbide (RuC).The ground state properties such as the equilibrium lattice constant, elastic constant, the bulk modulus, its pressure derivative, and the hardness in the four phases are determined and compared with available theoretical data. Only for the three phases B1, B3, and WC, is the RuC mechanically stable, while in the B2 phase it is unstable, but in B3 RuC is the most energetically favourable phase with the bulk modulus 263 GPa, and at sufficiently high pressure (P_t=19.2 GPa) the tungsten carbide (WC) structure would be favoured, where ReC-WC is meta-stable.The highest bulk modulus values in the B3, B2, and WC structures and the hardnesses of H(B3)=36.94 GPa, H(B1)=25.21 GPa, and H(WC)=25.30 GPa indicate that the RuC compound is a superhard material in B3, and is not superhard in B1 and WC structures compared with the H(diamond)=96 GPa.     

Synthesis and characterization of in situ nanocrystalline intermetallic phase reinforced AlTiSi amorphous matrix composite

Composites with partially amorphous matrix were synthesized by mechanical alloying of an Al₅₀Ti₄₀Si₁₀ elemental powder blend in a high energy planetary ball-mill, followed by high pressure (8 GPa) low temperature (350–450°C) sintering. Microstructural studies and compositional micro-analysis were carried out using scanning and transmission electron microscopy, and energy dispersive spectroscopy, respectively. Phase evolution as a function of milling time and isothermal temperature and their thermal stability was determined by X-ray diffraction at room or elevated temperature and differential scanning calorimetry, respectively. The microstructure of composites sintered between room temperature and 450°C showed nano-size (≈50 nm) crystalline precipitates of Al₃Ti dispersed in an amorphous matrix. The composites sintered at 400°C with 8 GPa pressure exhibited the highest density (3.58 Mg/m³), nanoindentation hardness (8.8 GPa), Young's modulus (158 GPa) and compressive strength (1940 MPa). A lower hardness and modulus on sintering at 450°C is attributed to additional amorphous to nanocrystalline phase transformation and partial coarsening of Al₃Ti.     

Raman spectra of shortite Na2Ca2(CO3)3 compressed up to 8 GPa

A rare mineral shortite, Na₂Ca₂(CO₃)₃, occurs among groundmass minerals in unaltered kimberlites, which suggests its participation in the evolution of kimberlite system. This work presents a high pressure Raman spectroscopic study of natural shortite (Udachnaya east kimberlites) compressed in KBr up to 8?GPa in a diamond anvil cell. At ambient pressure the spectrum contains two strong bands related to symmetric C-O stretching vibrations, four in-plane bending modes, and several low-frequency modes of lattice vibrations. Upon the pressure increase up to 8?GPa, almost all the bands exhibit positive shift with the rate of 1–4?cm^?1/GPa for the lattice modes and 3.6 and 3.9?cm^?1/GPa for the C-O stretching modes. The shifts of Raman modes are rather regular, which implies the absence of reconstructive phase transitions within the studied pressure range, similarly to the behavior of nyerereite, a related carbonate mineral. However, minor anomalies in the ν/P and FWHM/P dependences, observed at about 2?GPa, suggest some rearrangement and disordering of carbonate groups. The obtained data can be used for the estimation of residual pressure in shortite-bearing inclusions in deep-seated minerals.     

Structural,mechanical and thermal properties of some Holmium Pnictides under pressure: A theoretical approach

The high pressure structural, elastic and thermal properties of holmium pnictides HoX (X=N, P, As and Bi) were investigated theoretically by using an inter-ionic potential theory with modified ionic charge parameter. We have predicted a structural phase transition from NaCl (B₁) to CsCl (B₂)-type structure at pressure of 139 GPa for HoN, 52 GPa for HoP, 44 GPa for HoAs and 26 GPa for HoBi. Other properties, such as lattice constant, bulk modulus, cohesive energy, second and third-order elastic constants were calculated and compared with the available experimental and theoretical data. In order to gain further information the brittle behaviour of these compounds was observed. Some other properties like Shear modulus (G), Young's modulus (E), Poisson's ratio (ν), anisotropy factor (A), sound velocities, Debye temperature (θ_D) were calculated. The variation of elastic constants (C₁₁ and C₄₄) and Debye temperature (θ_D) with pressure was also presented.     

Structural, electronic and elastic properties of Ti2TlC, Zr2TlC and Hf2TlC

Using First-principle calculations, we have studied the structural, electronic and elastic properties of M₂TlC, with M = Ti, Zr and Hf. Geometrical optimization of the unit cell is in good agreement with the available experimental data. The effect of high pressures, up to 20 GPa, on the lattice constants shows that the contractions are higher along the c-axis than along the a axis. We have observed a quadratic dependence of the lattice parameters versus the applied pressure. The band structures show that all three materials are electrical conductors. The analysis of the site and momentum projected densities shows that bonding is due to M d-C p and M d-Tl p hybridizations. The M d-C p bonds are lower in energy and stiffer than M d-Tl p bonds. The elastic constants are calculated using the static finite strain technique. We derived the bulk and shear moduli, Young’s modulus and Poisson’s ratio for ideal polycrystalline M₂TlC aggregates. We estimated the Debye temperature of M₂TlC from the average sound velocity. This is the first quantitative theoretical prediction of the elastic properties of Ti₂TlC, Zr₂TlC, and Hf₂TlC compounds that requires experimental confirmation.