Thermoresponsive poly(N-isopropyl acrylamide)-grafted polycaprolactone films with surface immobilization of collagen

Thermoresponsive poly(N-isopropylacrylamide) (P(NIPAAm))-grafted polycaprolactone (PCL) films with a suitable amount of immobilized cell-adhesive collagen were prepared to improve cell adhesion and proliferation above the lower critical solution temperature (LCST, 32°C) of P(NIPAAm) without destroying cell detachment properties at lower temperatures. Covalently tethered P(NIPAAm) brushes on PCL film surfaces were first prepared via surface-initiated atom transfer radical polymerization (ATRP). The alkyl bromide end groups of the grafted P(NIPAAm) brushes were used in nucleophilic substitution reactions for the direct coupling of collagen to produce the collagen-immobilized thermoresponsive PCL surface. At 37°C, the cell attachments on the collagen-immobilized thermoresponsive PCL surface were enhanced substantially. The attached cells could be recovered simply by lowering culture temperature. The P(NIPAAm)-grafted PCL films with immobilized collagen are potentially useful as adhesion modifiers for advanced cell culture and tissue engineering applications.     

The behavior of poly(ε -caprolactone) and poly(ethylene oxide)-b-poly(ε -caprolactone) grafted to a poly(glycerol adipate) backbone at the air/water interface

The behavior of crystallizable poly(ε-caprolactone) (PCL) and poly(ε-caprolactone)-b-poly(ethylene oxide) (PCL-b-PEO) is studied at the air/water interface prior and after grafting to an amorphous poly(glycerol adipate) (PGA) backbone (PGA-g-PCL, PGA-g-(PCL-b-PEO)). Langmuir isotherms are measured and the structure formation in the monolayers on the water surface is followed by Brewster angle microscopy (BAM) and in Langmuir–Blodgett films after a transfer to silicon substrates by atomic force microscopy (AFM). It is observed that PGA-g-PCL forms significantly smaller crystals on the water surface and has smaller crystallization rate compared to PCL homopolymers of identical molar masses as the grafted chains. In contrast to crystals formed by linear PCL, the crystals formed by grafted PCL in PGA-g-PCL do not melt (readsorb at the water surface) in an expansion cycle on the Langmuir trough. Additionally, increasing the subphase temperature at constant surface area significantly above the melting point of linear PCL in bulk results in the formation of a mesophase, and it does lead to the disappearance of crystals. The isotherms of PGA-g-(PCL-b-PEO) show a transition at the surface pressure of ～10 mN/m. This is related to the fact that PEO chains leave the water surface and submerge into the subphase and/or the crystallization of PCL chains. The monolayer collapse appears in an extended plateau region starting at π values of ～30 mN/m. AFM images of Langmuir–Blodgett films reveal that PCL chains in PGA-g-PCL and PGA-g-(PCL-b-PEO) form lamellar crystals with a disk-shape and interconnected platelets, respectively.     

Synthesis and characterization of thermoresponsive hydrogels cross-linked with acryloyloxyethylaminopolysuccinimide

Biodegradable cross-linkers acryloyloxyethylaminopolysuccinimide (AEA-PSI) were obtained by microwave irradiation using maleic anhydride as materials. With AEA-PSI cross-linker, cross-linked poly(N-isopropylacrylamide-co-acrylic acid) [P(NIPAAm-co-AAc)] hydrogels were prepared, and their phase transition behavior, lower critical solution temperature (LCST), water content, thermodynamics stability, and enzymatic degradation properties were investigated. By alternating the NIPAAm/AAc molar ratio, hydrogels were synthesized to have LCST in the vicinity of 37 °C. The LCST of AEA-PSI-cross-linked P(NIPAAm-co-AAc) hydrogels was significantly influenced by monomer ratio of the NIPAAm/AAc but not by the cross-linking density within the polymer network. The water content of AEA-PSI-cross-linked P(NIPAAm-co-AAc) hydrogels was more than 90% even at 37 °C, which was controlled by the monomer molar ratio of NIPAAm/AAc, swelling media, and the cross-linking density. The thermodynamics stability was also characterized by thermogravimetry. In enzymatic degradation studies, breakdown of the AEA-PSI-cross-linked P(NIPAAm-co-AAc) hydrogels was dependent on the cross-linking density. Submitted to Colloid and Polymer Science, 2007-1-28.     

Self‐Assembled,Thermosensitive PCL‐g‐P(NIPAAm‐co‐HEMA) Micelles for Drug Delivery

Summary: A novel thermosensitive amphiphilic copolymer (PCL‐g‐P(NIPAAm‐co‐HEMA)) comprised of hydrophobic PCL segments and hydrophilic P(NIPAAm‐co‐HEMA) segments was designed and synthesized. The structure of the copolymer was characterized by FT‐IR, ¹H NMR and GPC analysis. The copolymer may self‐assemble into micelles in water and the resulting micelles demonstrated temperature sensitivity with a lower critical solution temperature (LCST) of 33 °C. The critical micellar concentration (CMC) obtained from surface tension measurements and the fluorescence method was around 30 mg · L⁻¹. Transmission electron microscopy (TEM) showed that the micelles exhibit a nanospheric morphology within a narrow size range of 150–160 nm. A cytotoxicity study showed that the PCL‐g‐P(NIPAAm‐co‐HEMA) copolymer exhibits good biocompatibility. The controlled drug release of the resulting micelles was investigated and it was found that micelles loaded with prednisone acetate showed improved drug release behavior due to the special micellar structure.

Self‐assembly of the PCL‐g‐P(NIPAAm‐co‐HEMA) copolymers.     

PP films grafted with N-isopropylacrylamide and N-(3-aminopropyl) methacrylamide by γ radiation: synthesis and characterization

Simultaneous grafting of N-isopropylacrylamide (NIPAAm) and N-(3-aminopropyl) methacrylamide hydrochloride (APMA) on polypropylene (PP) was investigated for obtaining interfaces that are stimuli-responsive under physiological conditions. A pre-irradiation method was optimized tuning the γ-irradiation dose, reaction time, temperature, and monomers concentrations. FT-IR ATR and XPS analysis of the grafted copolymers evidenced a greater content in NIPAAm than in APMA; the APMA/NIPAAm ratio increasing with the concentration of APMA in the reaction medium and when the grafting was carried out in 1 M NaNO₃. The grafted films were characterized regarding their thermal properties (DSC and TGA) swelling behavior and contact angle. Immersion of the pre-irradiated films in 1 M NIPAAm/0.5 M APMA aqueous solution rendered PP-g-(1NIPAAm-r-0.5APMA) which exhibited rapid and reversible transitions showing a LCST around the physiological temperature. By contrast, a greater content in APMA enhanced the hydrophilicity and prevented the shrinking of PP-g-(1NIPAAm-r-1APMA).     

Synthesis and characterization of thermoresponsive hydrogels cross-linked with chitosan

Hydrogels composed of N-isopropylacrylamide (NIPAAm) and acrylic acid (AAc) were prepared by redox polymerization with degradable chitosan cross-linkers. Chitosan degradable cross-linkers were synthesized by the acrylation of the amine groups of glucosamine units within chitosan and characterized with ¹H NMR. With the chitosan cross-linkers, loosely cross-linked poly(N-isopropylacryamideco-acrylic acid) [P(NIPAAm-co-AAc)] hydrogels were prepared, and their phase transition behavior, lower critical solution temperature (LCST), water content and degradation properties were investigated. The chitosan cross-linked P(NIPAAm-co-AAc) hydrogels were pliable and transparent at room temperature. The LCST could be adjusted at 32∼39°C by alternating the feed ratio. Swelling was influenced by NIPAAm/AAc monomer ratio, cross-linking density, swelling media, and temperature. All hydrogels with different feeding ratios contained more than 95% water at 25°C in the ultra pure water and phosphate-buffered saline (PBS, pH = 7.4 ± 0.1), and had a prospective swelling in the simulated gastric fluids (SGF, pH = 1.2) > 72.54%. In degradation studies, breakdown of the chitosan cross-linked P(NIPAAm-co-AAc) hydrogels was dependent on the cross-linking density. The chitosan cross-linked P(NIPAAm-co-AAc) hydrogels which can be tailored to create environmentally-responsive artificial extracellular materials have great potential for future use.      

Temperature‐sensitive chitosan membranes as a substrate for cell adhesion and cell sheet detachment

A series of temperature‐sensitive poly(CSA‐co‐NIPAAm) membranes that were suitable for cell culture and confluent cell sheets detachment were prepared. The membranes with thermo‐responsive surface properties were synthesized by the copolymerization of acrylic acid‐derivatized chitosan (CSA) and N‐isopropylacrylamide (NIPAAm) in aqueous solution. Characterization of the membranes were carried out by means of the Fourier transform infrared (FTIR), X‐ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), and water contact‐angle (WCA) measurements. The adhesion and detachment of mouse fibroblast (L929) cells on these membranes have been investigated. The study showed that poly(CSA‐co‐NIPAAm) membranes could not only enhance fibroblasts attachment but also harvest confluent cell sheets by simply lowering the temperature. Furthermore, the detached cells retained high viability and could proliferate again after transferred to a new culture surface. Copyright © 2011 John Wiley & Sons, Ltd.     

Characterization of stimuli-sensitive polymers for biomedical applications

Stimuli-sensitive polymers were synthesized by copolymerizing varying ratios of N-isopropyl acrylamide(NIPAAm) and acrylic acid(AAc). The influence of polyelectrolytes on the lower critical solution temperatures(LCSTs) of these temperature/pH sensitive polymers was investigated in the pH range of 2-12. Polyelectrolyte complexes were prepared by mixing poly(NIPAAm-co-AAc) as anionic polyelectrolyte with poly(allyl amine)(PAA) or poly(L-lysine)(PLL) as cationic polyelectrolytes, respectively. Back titration was performed to determine the pK_a values of PAAc in poly(NIPAAm-co-AAc) and to study the effect of comonomer ionization on the cloud point temperature. The effect of polyelectrolyte complex formation on the conformation of PLL was studied as a function of temperature by means of circular dichroism(CD). The swelling ratio of poly(NIPAAm-co-AAc) hydrogels as a function of pH at various temperature was obtained by measuring the weight of the hydrogels in buffer solutions. The LCSTs of the poly(NIPAAm-co-AAc) were strongly affected by pH, polyelectrolyte solutes, AAc content, and charge density. The influence of more hydrophobic PLL as a polyelectrolyte on the cloud point of PNIPAAm/water in the copolymer was stronger than that of poly(allyl amine)(PAA). Indomethacin was loaded into these hydrogels, and controlled release of this molecule from the hydrogel was determined under various temperature and pH conditions using UV/Vis spectrophotometry.     

Biodegradable amphiphilic block copolymers containing functionalized PEO blocks: Controlled synthesis and biomedical potentials

A series of controllable amphiphilic block copolymers composed of poly(ethylene oxide) (PEO) as the hydrophilic block and poly(?-caprolactone) (PCL) as the hydrophobic block with the amino terminal group at the end of the PEO chain (PCL-b-PEO-NH₂) were synthesized. Based on the further reaction of reactive amino groups, diblock copolymers with functional carboxyl groups (PCL-b-PEO-COOH) and functional compounds RGD (PCL-b-PEO-RGD) as well as the triblock copolymers with thermosensitive PNIPAAm blocks (PCL-b-PEO-b-PNIPAAM) were synthesized. The well-controlled structures of these copolymers with functional groups and blocks were characterized by gel permeation chromatography (GPC) and ¹H NMR spectroscopy. These copolymers with functionalized hydrophilic blocks were fabricated into microspheres for the examination of biofunctions via cell culture experiments and in vitro drug release. The results indicated the significance of introducing functional groups (e.g., NH₂, COOH and RGD) into the end of the hydrophilic block of amphiphilic block copolymers for biomedical potentials in tissue engineering and controlled drug release.     

Poly(N-isopropylacrylamide) with hydrolyzable lactic acid ester side groups: a new type of thermosensitive polymer

N-isopropylacrylamide (NIPAAm) was copolymerized with 2-hydroxyethyl methacrylate-monolactate (HEMA-monolactate). With increasing HEMA-monolactate content in the copolymer, the lower critical solution temperature (LCST) decreases. During incubation in an aqueous solution, the lactate groups are released by hydrolysis, by which the copolymer is converted into poly(NIPAAm-co-HEMA). By this process, the hydrophilicity of the copolymer increases, resulting in increased LCST values.     

PEGylated poly(ester amide) elastomer scaffolds for soft tissue engineering

Biodegradable synthetic elastomers with tunable mechanical and physicochemical properties remain attractive materials for soft tissue engineering. We have recently synthesized novel poly(1,3‐diamino‐2‐hydroxypropane‐co‐glycerol sebacate)‐co‐poly(ethylene glycol) (APS‐co‐PEG) biodegradable elastomers. This class of PEGylated elastomers has widely tunable mechanical and degradation properties compared wtih currently available biodegradable elastomers. To further investigate the biological application of this class of elastomers, we fabricated hybrid APS‐co‐PEG/polycaprolactone (PCL) porous scaffolds by electrospinning. The fiber morphology, chemical composition, mechanical properties, degradability, and cytocompatibility of hybrid APS‐co‐PEG/PCL electrospun scaffolds were characterized. These scaffolds exhibited a wide range of mechanical properties and similar cytocompatibility to PCL scaffolds. Importantly, PEGylation inhibited platelet adhesion on all APS‐co‐PEG/PCL electrospun scaffolds when compared with PCL and APS/PCL scaffolds, suggesting a potential role in mitigating thrombogenicity in vivo. Additionally, APS‐25PEG/PCL scaffolds were found to be mechanically analogous to human heart valve leaflet and supported attachment of human aortic valve cells. These results reveal that hybrid APS‐co‐PEG/PCL scaffolds may serve as promising constructs for soft tissue engineering, especially heart valve tissue engineering. Copyright © 2017 John Wiley & Sons, Ltd.     

Preparation of thermo-responsive polymer brushes on hydrophilic polymeric beads by surface-initiated atom transfer radical polymerization for a highly resolutive separation of peptides

Poly(N-isopropylacrylamide-co-N-tert-butylacrylamide) [P(IPAAm-co-tBAAm)] brushes were prepared on poly(hydroxy methacrylate) (PHMA) [hydrolyzed poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate)] beads having large pores by surface-initiated atom transfer radical polymerization (ATRP) and applied to the stationary phases of thermo-responsive chromatography. Optimized amount of copolymer brushes grafted PHMA beads were able to separate peptides and proteins with narrow peaks and a high resolution. The beads were found to have a specific surface area of 43.0 m²/g by nitrogen gas adsorption method. Copolymer brush of P(IPAAm-co-tBAAm) grafted PHMA beads improved the stationary phase of thermo-responsive chromatography for the all-aqueous separation of peptides and proteins.     

Synthesis of miktoarm star (block) polymers based on a heterofunctional initiator via combination of ROP, ATRP and functional group transformation

Versatile miktoarm three-arm star polymers, (polystyrene)(polyε-caprolactone)₂ ((PS)(PCL)₂), (PS-b-poly(n-butyl acrylate))(PCL-b-PS-b-poly(n-butyl acrylate))₂ ((PS-b-PnBA)(PCL-b-PS-b-PnBA)₂) and (PtBA-b-PS)(PCL-b-PtBA-b-PS)₂ were synthesized via combination of atom-transfer radical polymerization (ATRP), functional group transformation technique and ring opening polymerization (ROP) using 1,1-dihydroxymethyl-1-(2-bromoisobutyryloxy)methyl ethane (DHB) as a heterofunctional initiator. In the synthesis of (PS)(PCL)₂ by combination of ROP of ε-caprolactone (ε-CL) and ATRP, the implementation sequence, ROP followed by ATRP, was proved to be effective to get a well-defined miktoarm star polymer than the reverse one. The two miktoarm star block polymers, (PS-b-PnBA)(PCL-b-PS-b-PnBA)₂ and (PtBA-b-PS)(PCL-b-PtBA-b-PS)₂, were prepared by one ROP step, one group transformation and ATRP steps using the same initiator. All the polymers have defined structures and their molecular weights are adjustable with good controllability.     

Characterization of biodegradable and cytocompatible nano-hydroxyapatite/polycaprolactone porous scaffolds in degradation in vitro

Porous nano-hydroxyapatite/polycaprolactone (nHA/PCL) scaffolds with different composition ratios of nHA/PCL were fabricated via a melt-molding/porogen leaching technique. All scaffolds were characterized before and after degradation in vitro for six months. The original scaffolds had high porosity at around 70% and showed decreasing compressive modulus (from 24.48 to 2.69 MPa for hydrated scaffolds) with the introduction of nHA. It was noted that the scaffolds could retain relatively stable architecture and mechanical properties for at least six months, although some slight changes happened with the nHA/PCL scaffolds in the mass, the nHA content, the PCL molecular weight and the crystallinity. Moreover, during the 7 days culture of bone marrow stromal cells (BMSCs) on scaffolds, the cell adhesion and proliferation of BMSCs were presented well on both the surface and the cross-section of the scaffolds. All of these results suggested the nHA/PCL scaffolds to be promising in bone tissue engineering.     

Nanosized temperature-responsive Fe3O4-UA-g-P(UA-co-NIPAAm) magnetomicelles for controlled drug release

This paper demonstrated the preparation of temperature-responsive magnetomicelles that consist of a functionalized hexagonal magnetic core, Fe₃O₄-undecylenic acid (Fe₃O₄-UA), and an amphiphilic surface layer of temperature-responsive polymer. The functionalized magnetic Fe₃O₄-UA core was prepared by a suspension-oxidation reaction in an aqueous solution, during which the formation of the Fe₃O₄ and coordination of UA to the Fe₃O₄ occurred simultaneously. Amphiphilic poly(undecylenic acid-co-N-isopropylacrylamide) (P(UA-co-NIPAAm)) was grafted to the Fe₃O₄-UA core as a temperature-responsive micellar surface layer to prepare well dispersed Fe₃O₄-UA-g-P(UA-co-NIPAAm) magnetomicelles with the size of around 8 nm in water. The application of resulted nanosized Fe₃O₄-UA-g-P(UA-co-NIPAAm) magnetomicelles in controlled drug delivery was further investigated and it was found that resulting magnetomicelles exhibited good potential for temperature triggered controlled drug release.     

Microstructure and properties of poly(vinyl alcohol-co-vinyl acetate)-g-ε-caprolactone

Microstructural studies of Poly(vinyl alcohol-co-vinyl acetate)-g-polycaprolactone (PVA-Ac)-g-(PCL) were realized principally using NMR. Initial PVA-Ac has a rather blocky structure with an average sequence length of PVA units equal to 12.5. During the synthesis of the studied (PVA-Ac)-g-(PCL), alcoholysis and transesterification reactions led to PCL grafts with acetate end groups. These reactions typically concern 2-5.5% of the total acetate groups. The influence of the local tacticity on the alcohol triad reactivity was evidenced and explained the incomplete functionalization of the PVA-Ac hydroxyl groups. Alcoholysis reactions were also evidenced but with a very low rate in the tested conditions. Caprolactone homopolymerization was not observed. Other properties of the final synthesized copolymers were also presented. Crystallinity totally disappeared in the (PVA-Ac)-g-(PCL). The glass transition temperature was perfectly adjustable by the Fox law without significant modification of the viscoelastic properties characterized by dynamic rheology.     

Novel electrospun poly(ε-caprolactone)-based bicomponent nanofibers possessing surface enriched in tertiary amino groups

For the first time preparation of electrospun poly(ε-caprolactone) (PCL) based nanofibers possessing surface enriched in tertiary amino groups is shown. For that purpose the pair PCL and poly(ε-caprolactone)-b-poly[(2-dimethylamino)ethyl methacrylate] (PCL-b-PDMAEMA) diblock copolymers was used. PCL-b-PDMAEMA copolymers were synthesized using a combination of ring-opening polymerization and atom transfer radical polymerization (ATRP). Nanofibers with mean diameters ranging from 400 to 800 nm were obtained. Their morphology was evaluated by scanning electron (SEM) and atomic force microscopy (AFM). It was found that the morphology of the fibers depended on the weight ratio between the partners and the length of the PDMAEMA-block in the copolymers. The enrichment of the fiber surface in tertiary amino groups was studied by X-ray photoelectron spectroscopy (XPS). Increasing the copolymer content and the length of the PDMAEMA-block led to increase of the amount of tertiary amino groups on the fiber surface. The AFM analyses of the mechanical properties of the fiber surface showed that increasing the copolymer content led to decrease of the surface stiffness. The increase of the copolymer content led also to decrease of the melting temperature and the crystallinity degree in respect to PCL from the (co)polymer as determined by differential scanning calorimetry.     

Synthesis and characterization of AgBr nanocomposites by templated amphiphilic comb polymer

A novel amphiphilic graft copolymer, poly(vinylidene fluoride-co-chlorotrifluoroethylene)-g-poly(4-vinyl pyridine) (P(VDF-co-CTFE)-g-P4VP) at 65:35 wt.%, respectively, was synthesized via atom transfer radical polymerization (ATRP), as confirmed by nuclear magnetic resonance (¹H NMR) and transmission electron microscopy (TEM). Silver bromide (AgBr) nanoparticles were in situ generated within the self-assembled P(VDF-co-CTFE)-g-P4VP graft copolymer. TEM, UV–visible spectroscopy and X-ray diffraction (XRD) analyses support the successful formation of P(VDF-co-CTFE)-g-P4VP nanocomposites consisting of stabilized AgBr nanoparticles mostly 20–40 nm in size, which is presumably due to the capping action of the coordinating pyridine groups of the graft copolymer. The wavenumber of pyridine nitrogen in FT-IR spectra and the glass transition temperature (T_g) of the graft polymer measured by DSC shifted upon the formation of AgBr nanoparticles, indicating specific interactions between the nanoparticles and the graft copolymer matrix.     

Preparation of a thermo- and pH-sensitive nanofibrous scaffold with embedded chitosan-based nanoparticles and its evaluation as a drug carrier

Environmentally sensitive poly(N-isopropylacrylamide) (PNIPAAm) nanofibrous scaffolds loaded with a hydrophilic drug were fabricated via an electrospinning process. First, thermally crosslinkable poly(NIPAAm-co-N-methylolacrylamide) (PNN) was synthesized by redox polymerization below the phase transition temperature of PNIPAAm. The phase transition temperature of the PNN copolymer could be altered from 34 to 40 °C by changing the ratio of N-methylolacrylamide (NMA) to NIPAAm. Subsequently, PNN/chitosan nanofibers were electrospun using ethanol/acetic acid/water as a cosolvent. The PNN/chitosan nanofibers were sensitive to both pH and temperature. The fibrous structure of the soaked PNN/chitosan nanofibers was successfully preserved by the crosslinking of NMA. Furthermore, the chitosan-based nanoparticles (NPs) were introduced into the PNN nanofibers (PNN/NPs) to achieve prolonged drug release. The nanoparticles were observed in the PNN nanofibers by transmission electron microscopy. All of the scaffolds examined had high tensile strengths (1.45 MPa or above) and exhibited no significant cytotoxicity toward human fetal skin fibroblasts. Finally, doxycycline hyclate was used as a model drug. The results illustrated that PNN/NPs nanofibrous scaffolds exhibited continuous drug release behavior for up to 1 week, depending on the pH and temperature.     

Thermo-responsive and antifouling PVDF nanocomposited membranes based on PNIPAAm modified TiO2 nanoparticles

A novel hydrophilic nanocomposite additive(TiO2-g-PNIPAAm) was synthesized by the surface modification of titanium dioxide(TiO2) with N-isopropylacrylamide(NIPAAm) via "graft-from" technique. And the nanocomposite membrane of poly(vinylidene fluoride)(PVDF)/TiO2-g-PNIPAAm was fabricated by wet phase inversion. The graft degree was obtained by thermo-gravimetric analysis(TGA). Fourier transform infrared attenuated reflection spectroscopy(FTIR-ATR) and X-ray photoelectronic spectroscopy(XPS) characterization results suggested that TiO2-g-PNIPAAm nanoparticles segregated on membrane surface during the phase separation process. Scanning electron microscopy(SEM) was conducted to investigate the surface and cross-section of the modified membranes. The water contact angle measurements confirmed that TiO2-g-PNIPAAm nanoparticles endowed PVDF membranes better hydrophlilicity and thermo-responsive properties compared with those of the pristine PVDF membrane. The water contact angle decreased from 92.8° of the PVDF membrane to 61.2° of the nanocompostie membrane. Bovine serum albumin(BSA) static and dynamic adsorption experiments suggested that excellent antifouling properties of membranes was acquired after adding TiO2-gPNIPAAm. The maximum BSA adsorption at 40 °C was about 3 times than that at 23 °C. The permeation experiments indicated the water flux recover ratio and BSA rejection ratio were improved at different temperatures.