Synthesis of 5-(trifluoromethyl)cyclohexane-1,3-dione and 3-amino-5-(trifluoromethyl)cyclohex-2-en-1-one: new trifluoromethyl building block

A simple synthesis of 5-(trifluoromethyl)cyclohexane-1,3-dione and 3-amino-5-(trifluoromethyl)cyclohex-2-en-1-one from the sodium salt of methyl or ethyl-4-hydroxy-2-oxo-6-(trifluoromethyl)cyclohex-3-en-1-oate is demonstrated. The compounds represent highly functionalized reactive intermediates for the synthesis of organic and heterocyclic compounds containing a trifluoromethyl group.     

How trimethyl(trifluoromethyl)silane reacts with itself in the presence of naked fluoride--a one-pot synthesis of bis([15]crown-5)cesium 1,1,1,3,5,5,5-heptafluoro-2,4-bis(trifluoromethyl)pentenide

Reactions of trimethyl(trifluoromethyl)silane in the presence of "naked" fluoride proceed up to a temperature of +5 degrees C mainly with formation of [Me3Si(CF3)2]-. A further rise of temperature up to about 20 degrees C gives evidence for the formation of a salt with the 1,1,1,2,3,6,6,6-octafluoro-2,4,4,5,5-pentakis(trifluoromethyl)hexan-3-ide anion. This intermediate decomposes at room temperature into the 1,1,1,3,5,5,5-heptafluoro-2,4-bis(trifluoromethyl)pentenide anion. The bis([15]crown-5)cesium salt, [Cs([15]crown-5)2][(CF3)2CCFC(CF3)2] has been characterized unambiguously as the stable final product of this reaction sequence. Thermal decomposition of this salt opens a convenient nontoxic route to obtain 1,1,3,3-tetrakis(trifluoromethyl)allene, (F3C)2C=C=C(CF3)2.     

A novel synthesis of hexakis(trifluoromethyl)cyclotriphosphazene. Single-crystal X-ray structures of N3P3(CF3)6 and N3P3F6

Reaction of hexafluorocyclotriphosphazene (N3P3F6) with trimethyl(trifluoromethyl)silane in the presence of a catalytic amount of cesium fluoride in THF produced hexakis(trifluoromethyl)cyclotriphosphazene [N3P3(CF3)6] in 90% isolated yield. N3P3(CF3)6 is fully characterized by melting point, IR, NMR (19F, 13C, 31p), MS, and elemental analysis data. Single-crystal X-ray structures of N3P3(CF3)6 and N3P3F6 are reported.     

Photoisomerization of matrix-isolated bis(trifluoromethyl) sulfoxide: formation of the sulfenic ester CF3SOCF3

Bis(trifluoromethyl) sulfoxide, CF(3)S(O)CF(3), isolated in noble gas matrixes at low temperatures, isomerizes upon UV irradiation into the sulfenic ester CF(3)SOCF(3). The new species is characterized spectroscopically, and the vibrational assignment is supported by (18)O isotopic labeling experiments and by DFT calculations. The calculated structural parameters of CF(3)SOCF(3) are compared with the calculated and experimental data of the related compounds CF(3)SSCF(3) and CF(3)OOCF(3). In addition, the computed enthalpy differences between the sulfoxide R(2)S=O and sulfenate RSOR structures for R = H, F, CH(3), and CF(3) are included.     

Design,synthesis and insecticidal activities of novel 1-substituted-5-(trifluoromethyl)-1H-pyrazole-4-carboxamide derivatives

A series of novel 5-(trifluoromethyl)-1H-pyrazole-4-carboxamide derivatives(6a–6n, 7a, 7b, and 8a-8f)were synthesised by placing the amide bond at the 4-position of the pyrazole ring. These derivatives differed from the structure of chlorantraniliprole analogues with the amide bond at the 5-position of the pyrazole ring. Preliminary bioassay results revealed that a few title compounds exhibited good insecticidal activities against lepidopteran pests, such as Plutella xylostella, Mythimna separate, Heliothis armigera, and Ostrinia nubilalis. Some title compounds also elicited broad-spectrum insecticidal activities against dipterous insects including Culex pipiens pallens after altering the amide position. Similar to pyrazole-5-carboxamide analogues, compounds 6b and 6e showed 100% insecticidal activity against P. xylostella, C. pipiens pallens, and M. separate at concentrations of 200, 2, and 200 mg/m L, respectively.This finding suggested that 5-(trifluoromethyl)-1H-pyrazole-4-carboxamide derivatives are potential alternative insecticides for management of agriculture pests.     

Detection and spectral analysis of trifluoromethyl groups at a surface by sum frequency generation vibrational spectroscopy

Sum frequency generation (SFG) vibrational spectroscopy was used to detect the presence of trifluoromethyl groups on the surface of 4-(trifluoromethyl)benzyl alcohol (TFMBA) in air. Supplementary data from infrared and Raman spectra were correlated to ab initio calculations by use of density functional theory (DFT) for TFMBA and three related compounds to reliably assign vibrational modes to the spectra. It was shown that strongly ordered CF3 groups dominate the surface of the TFMBA, and the vibrational modes of this functional group are strongly coupled to the benzene ring of the benzyl alcohol. This coupling, along with the SFG activity of the CF3 group, is removed with the insertion of an oxygen atom between the CF3 group and the benzene ring.     

Preparation and characterization of bis(trifluoromethyl)phosphanide salts of outstanding stability

The stable compounds [NEt(4)][P(CF(3))(2)] and [18-crown-6-K][P(CF(3))(2)] were synthesized in quantitative yields by treatment of HP(CF(3))(2) with ionic cyanides at low temperature. These novel salts were characterized by multinuclear NMR spectroscopy, elemental analysis, and vibrational spectroscopy. Excellent agreement of experimental and theoretical vibrational frequencies, calculated at the B3PW91 level of theory, clearly confirms the saltlike character of these compounds. Due to their ionic nature, these salts are excellent nucleophilic reagents for the transfer of P(CF(3))(2) groups, suitable for the synthesis of chiral bidentate bis(trifluoromethyl)phosphine containing compounds.     

Tris(trifluoromethyl)borane carbonyl, (CF3)3BCO-synthesis,physical, chemical and spectroscopic properties,gas phase,and solid state structure

Tris(trifluoromethyl)borane carbonyl, (CF(3))(3)BCO, is obtained in high yield by the solvolysis of K[B(CF(3))(4)] in concentrated sulfuric acid. The in situ hydrolysis of a single bonded CF(3) group is found to be a simple, unprecedented route to a new borane carbonyl. The related, thermally unstable borane carbonyl, (C(6)F(5))(3)BCO, is synthesized for comparison purposes by the isolation of (C(6)F(5))(3)B in a matrix of solid CO at 16 K and subsequent evaporation of excess CO at 40 K. The colorless liquid and vapor of (CF(3))(3)BCO decomposes slowly at room temperature. In the gas phase t(1/2) is found to be 45 min. In the presence of a large excess of (13)CO, the carbonyl substituent at boron undergoes exchange, which follows a first-order rate law. Its temperature dependence yields an activation energy (E(A)) of 112 kJ mol(-)(1). Low-pressure flash thermolysis of (CF(3))(3)BCO with subsequent isolation of the products in low-temperature matrixes, indicates a lower thermal stability of the (CF(3))(3)B fragment, than is found for (CF(3))(3)BCO. Toward nucleophiles (CF(3))(3)BCO reacts in two different ways: Depending on the nucleophilicity of the reagent and the stability of the adducts formed, nucleophilic substitution of CO or nucleophilic addition to the C atom of the carbonyl group are observed. A number of examples for both reaction types are presented in an overview. The molecular structure of (CF(3))(3)BCO in the gas phase is obtained by a combined microwave-electron diffraction analysis and in the solid state by single-crystal X-ray diffraction. The molecule possesses C(3) symmetry, since the three CF(3) groups are rotated off the two possible positions required for C(3)(v)() symmetry. All bond parameters, determined in the gas phase or in the solid state, are within their standard deviations in fair agreement, except for internuclear distances most noticeably the B-CO bond lengths, which is 1.69(2) A in the solid state and 1.617(12) A in the gas phase. A corresponding shift of nu(CO) from 2267 cm(-)(1) in the solid state to 2251 cm(-)(1) in the gas phase is noted in the vibrational spectra. The structural and vibrational study is supported by DFT calculations, which provide, in addition to the equilibrium structure, confirmation of experimental vibrational wavenumbers, IR-band intensities, atomic charge distribution, the dipole moment, the B-CO bond energy, and energies for the elimination of CF(2) from (CF(3))(x)()BF(3)(-)(x)(), x = 1-3. In the vibrational analysis 21 of the expected 26 fundamentals are observed experimentally. The (11)B-, (13)C-, and (19)F-NMR data, as well as the structural parameters of (CF(3))(3)BCO, are compared with those of related compounds.     

The synthesis of new valence-bond isomers of pentakis(trifluoromethyl)-1,3-diazepine

A new valence-bond isomer of pentakis(trifluoromethyl)-1,3-diazepine was synthesized from tris(trifluoromethyl)cyclopropenyl trifluoromethyl ketone, and reacted with diazomethane to give an N-methylated product.     

Cyano- and isocyanotris(trifluoromethyl)borates: syntheses, spectroscopic properties, and solid state structures of K[(CF3)3BCN] and K[(CF3)3BNC

A two step synthesis to the isocyanotris(trifluoromethyl)borate anion, [(CF3)3BNC]-, and its isomerization to the cyanotris(trifluoromethyl)borate anion, [(CF3)3BCN]-, at temperatures above 150 degrees C are presented. In the first step (CF3)3BNCH was obtained by reacting (CF3)3BCO with hydrogen cyanide followed by deprotonation of the HCN adduct with Li[N(SiMe3)2] in toluene. The thermal behavior of K[(CF3)3BNC] and K[(CF3)3BCN] were investigated by differential scanning calorimetry (DSC), and K[BF4] was identified as a major solid decomposition product. The enthalpy of the isocyanide-cyanide rearrangement, deltaH(iso) = -35 +/- 4 kJ mol(-1), was obtained from DSC measurements, and the activation energy, E(a) = 180 +/- 20 kJ mol(-1), from kinetic measurements. The isomerization was modeled as an intramolecular reaction employing DFT calculations at the B3LYP/6-311+G(d) level of theory yielding a reaction enthalpy of deltaH(iso) = -36.1 kJ mol(-1) and an activation energy of E(a) = 155.7 kJ mol(-1). The solid-state structures of K[(CF3)3BNC] and K[(CF3)3BCN] were determined by single-crystal X-ray diffraction. Both salts are isostructural and crystallize in the orthorhombic space group Pnma (no. 62). In the crystals the borate anions possess C(s) symmetry, while for the energetic minimum C3 symmetry is predicted by DFT calculations. The borate anions have been characterized by IR and Raman spectroscopy as well as by NMR spectroscopy. The assignment of the IR and Raman bands is supported by their calculated wavenumbers and intensities. The spectroscopic and structural properties of both borate anions are compared to the properties of the isoelectronic borane carbonyl (CF3)3BCO and the [B(CF3)4]- anion as well as to those of other related species.     

Regioselective solvent-sensitive reactions of 6-(trifluoromethyl)comanic acid and its derivatives with phenylhydrazine

6-(Trifluoromethyl)comanic acid reacts regioselectively with phenylhydrazine in water to give 5-[3,3,3-trifluoro-2-(phenylhydrazono)propyl]-1-phenyl-1H-pyrazole-3-carboxylic acid. Similar reaction in dioxane leads to 3-[3,3,3-trifluoro-2-(phenylhydrazono)propyl]-1-phenyl-1H-pyrazole-5-carboxylic acid. A strong solvent influence on the reaction route was also found for 6-(trifluoromethyl)comanic acid derivatives.     

A simple and convenient synthesis of 3-[5-(trifluoromethyl)-1,2,3-triazol-4-yl]cinnamic acids from 4-aryl-6-(trifluoromethyl)-2H-pyran-2-ones and sodium azide

4-Aryl-6-(trifluoromethyl)-2H-pyran-2-ones and ethyl 4-aryl-6-(trifluoromethyl)-2-oxo-2H-pyran-3-carboxylates react with sodium azide to produce highly functionalized CF₃-1,2,3-triazoles: 3-[5-(trifluoromethyl)-1,2,3-triazol-4-yl]cinnamic acids and monoethyl esters of [5-(trifluoromethyl)-1,2,3-triazol-4-yl]arylmethylidene malonic acids.     

Synthesis and properties of mercury bis(trifluoromethyl)phosphanides and their phosphane complexes

The thermally unstable compounds Hg(CN)P(CF(3))(2) and Hg[P(CF(3))(2)](2) were obtained by reactions of mercury cyanide and bis(trifluoromethyl)phosphane in solution and characterized by multinuclear NMR spectroscopy. An increase in thermal stability is observed when the products form 18 valence electron complexes. The compounds [Hg(P(CF(3))(2))(2)(dppe)] (dppe = 1,2-bis(diphenylphosphanyl)ethane) and [Hg(P(CF(3))(2))(2)(Me(3)P)(2)] have been isolated in almost quantitative yield by reacting [Hg(CN)(2)(dppe)] or [Hg(CN)(2)(Me(3)P)(2)] with HP(CF(3))(2). [Hg(P(CF(3))(2))(2)(dppe)] crystallizes in the triclinic space group P1. The mercury atom is coordinated in a distorted tetrahedral fashion. The Hg-P(CF(3))(2) bonds, ca. 250 pm, are significantly longer than those of the mercury bis(phosphanides) Hg(PR(2))(2) with R = t-Bu, 245 pm, or SiMe(3), 241 pm. These easily accessible compounds [Hg(P(CF(3))(2))(2)(dppe)] and [Hg(P(CF(3))(2))(2)(Me(3)P)(2)] act as nucleophilic bis(trifluoromethyl)phosphane group transfer reagents.     

Complete defluorination of 1,2,3,4-tetramethyl-5-(trifluoromethyl)cyclopentadiene by titanium tetrakis(dimethylamide)--selective formation of a cyclic hexanuclear titanium fluoroamide and 6,6-dimethylaminotetramethylfulvene

1,2,3,4-Tetramethyl-5-(trifluoromethyl)cyclopentadiene (Cp*CF3-H, 1) reacts with [Ti(NMe2)4] (2) under mild conditions to give [Ti(mu-NMe2)(NMe2)(mu-F)(F)]6 (3) in nearly quantitative yield. The molecular structure of 3 consists of a ring of six [TiF2(NMe2)2] edge-bridged octahedra. Titanium complexes containing the Cp*CF3 ligand, which was the primary intention of these investigations, were not observed. C5Me4=C(NMe2)2 (4) was isolated as a by-product. The complete defluorination of an aliphatic CF3 group occurs during the reaction. The reaction mechanism involves the primary formation of a difluorofulvene intermediate C5Me4=CF2 (5), which was monitored by NMR studies. Density functional theory calculations predict a highly charged C6 atom (+0.87) in 5, which is discussed as the driving force of the reaction.     

CF3 oxonium salts, O-(trifluoromethyl)dibenzofuranium salts: in situ synthesis, properties, and application as a real CF3+ species reagent

We report in situ synthesis of the first CF(3) oxonium salts, thermally unstable O-(trifluoromethyl)dibenzofuranium salts, which furthermore have different counteranions (BF(4)-, PF(6)-, SbF(6)-, and Sb(2)F(11)-) and ring substituents (tert-butyl, F, and OCH(3)), by photochemical decomposition of the corresponding 2-(trifluoromethoxy)biphenylyl-2'-diazonium salts at -90 to -100 degrees C. The yields markedly increased in the order of BF(4)- < PF(6)- < SbF(6)- < Sb(2)F(11)-. The CF(3) oxonium salts were fully assigned by means of (1)H and (19)F NMR spectroscopy at low temperature. The CF(3) salts decomposed to form CF(4) and dibenzofurans. The half-life times at -60 degrees C of the 2-tert-butyl salts having different counteranions were 29 min for BF(4)- salt 2d, 36 min for PF(6)- salt 2c, 270 min for SbF(6)- salt 2a, and 415 min for Sb(2)F(11)- salt 2b. Those at -60 degrees C of the Sb(2)F(11)- salts having different 2-substituents were 13 min for F salt 3b, 63 min for H (unsubstituted) salt 1b, and 415 min for tert-butyl salt 2b. Thus, the stability of the CF(3) oxonium salts increased in the order of BF(4)- < PF(6)- < SbF(6)- < Sb(2)F(11)- and F < H < tert-butyl, which is in accord with the increasing orders of the non-nucleophilicity of counteranions and the electron-donating effect of ring substituents. 2-tert-Butyl-O-(trifluoromethyl)dibenzofuranium hexafluoroantimonate (2a) was thus chosen and successfully applied as a real CF(3)+ species source to the direct O- and N-trifluoromethylations of alcohols, phenols, amines, anilines, and pyridines under very mild conditions. The thermal decomposition method with a mixture of diazonium salt 17a and aryl- or alkylsulfonic acids, pyridine, or pyridines having an electron-withdrawing group also afforded CF(3)O or CF(3)N products. The trifluoromethylation mechanism is discussed and an S(N)2 mechanism containing the transient formation of free CF(3)+ is proposed. Thus, the present study has demonstrated that the exceedingly reactive CF(3)+ species can be generated much easier than the CH(3)+ species, contrary to the common sense that CF(3)+ is extremely difficult to generate in solution.     

Reactions of 2-(trifluoromethyl)chromones with cyanoacetamides, ethyl cyanoacetate and diethyl malonate. Unexpected synthesis of benzo[c]coumarin derivatives

While 2-(trifluoromethyl)chromones react with cyanoacetamides in the presence of sodium ethoxide to produce 6-(2-hydroxyaryl)-4-(trifluoromethyl)-2-oxo-1,2-dihydropyridine-3-carbonitriles, their reactions with ethyl cyanoacetate and diethyl malonate under the same conditions took an entirely different course and gave novel functionalized derivatives of 6H-benzo[c]chromen-6-one.     

Bis(trifluoromethyl)phosphane and bis(pentafluorophenyl)phosphane and their pentacarbonyl tungsten complexes: improved synthesis and an experimental and density functional study

The use of Bu(3)SnH and Me(3)SnH in the synthesis of HP(CF(3))(2) and HP(C(6)F(5))(2) from the corresponding bromides leads to a high-yield synthesis, which additionally provides these compounds in large quantities. The pentacarbonyl tungsten complexes [W(CO)(5)PH(CF(3))(2)] and [W(CO)(5)PH(C(6)F(5))(2)] were synthesized reacting the corresponding phosphanes with [W(CO)(5)THF] and characterized by X-ray and elemental analysis as well as multinuclear NMR and mass spectroscopy. The vibrational analyses of HP(CF(3))(2) and HP(C(6)F(5))(2) and their tungsten pentacarbonyl complexes were achieved in combination with hybrid DFT calculations. The optimized structures of [W(CO)(5)PH(CF(3))(2)] and [W(CO)(5)PH(C(6)F(5))(2)] at the B3PW91 level of theory using a LanL2DZ basis and ECP at the tungsten atom and a 6-311G(3d,p) and 6-311G(d,p) basis set for the nonmetal atoms, respectively, yield an impressively good agreement between experimental and theoretical geometric parameters. An increased pi-acidity of HP(CF(3))(2) in comparison with HP(C(6)F(5))(2) and HPPh(2) is discussed in the context of vibrational analysis, X-ray structural investigations, and theoretical calculations.     

Alkoxide- and hydroxide-induced nucleophilic trifluoromethylation using trifluoromethyl sulfone or sulfoxide

[reaction: see text] The first alkoxide- and hydroxide-induced nucleophilic trifluoromethylation of carbonyl compounds, disulfides, and other electrophiles, using phenyl trifluoromethyl sulfone 1a (sulfoxide 1b) is reported. The trifluoromethyl sulfone 1a or sulfoxide 1b acts as a "CF(3)(-)" synthon. Both sulfone 1a and sulfoxide 1b are commercially available and can also be conveniently prepared from trifluoromethane. The new methodology provides a convenient route for efficient trifluoromethylation.     

Lanthanide compounds with fluorinated OC6F5 ligands: homo- and heterovalent complexes of Eu(II) and Eu(III)

The fluorinated phenoxide OC6F5 forms the stable Eu(II) and Eu(III) derivatives (DME)2Eu(mu-OC6F5)3Eu(mu-OC6F5)3Eu(DME)2 and (DME)2Eu(OC6F5)3, as well as the heterovalent product (DME)2Eu(mu-OC6F5)3Eu(DME)(OC6F5)2, in redox reactions of Eu with HOC6F5 or in proton-transfer reactions of HOC6F5 with Eu(SPh)2. The divalent complex crystallizes as a trimer with three bridging phenoxides bridging each pair of metals, with the terminal metals coordinating DME and the central metal ion encapsulated totally by O(C6F5) and dative fluoride interactions. The trivalent compound is monomeric with terminal phenoxide ligands and no Eu-F interactions. The heterovalent compound has clearly localized metal valence states and coordination features that mimic the homovalent species with the terminal OC6F5 bound to the Eu(III) ion, three bridging OR ligands spanning the Eu(II) and Eu(III) ions, and dative Eu(II)-F bonds. At elevated temperatures, these compounds decompose to give a mixture of solid-state fluoride phases.     

Synthesis and structures of trifluoromethyl-, fluoro-, and azido-substituted hexabenzylhexaazaisowurtzitanes and isolation of a novel hexaazaisowurtzitane-based polycycle

The first hexabenzylhexaazaisowurtzitane cage compounds with trifluoromethyl and azide groups, as well as those with fluorine atoms in the 3- and 4-positions, have been prepared and fully characterized. A study of the substituent influence on the benzene ring regarding the formation of the hexaazaisowurtzitane polycycle in either the 2- or 4-position with CF(3), F, and N(3) revealed an interesting difference. In all cases with CF(3), F, and N(3) substituents in the 4-position, the corresponding hexabenzylhexaazaisowurtzitanes were isolated. The corresponding hexabenzylhexaazaisowurtzitanes were also formed when these substituents were in the 2-position; however, in addition with azide in 2-position a novel type of polycycle was isolated and identified. (15)N NMR data and crystal structures of hexabenzylhexaazaisowurtzitane derivatives were obtained and are discussed in detail.