Electrocatalytic oxidation and flow-injection determination of sulfur amino acids on a glassy carbon electrode modified by a nickel(II) polytetrasulfophthalocyanine film

The electrochemical oxidation of sulfur amino acids, i.e., cysteine, cystine, and methionine, is studied on a glassy carbon electrode modified by a film of nickel(II) polytetrasulfophthalocyanine (poly-NiTsPc). Poly-NiTsPc demonstrates a selective mediator activity in the oxidation of sulfur amino acids, depending on the pH of solution. The proper conditions for fabricating a polymer film on the surface of glassy carbon are found and the conditions of registering the maximal electrocatalytic effect on the modified electrode are determined. A procedure is proposed for the voltammetric determination and amperometric detection of cysteine, cystine, and methionine on an electrode coated by a poly-NiTsPc film under the conditions of flow-injection analysis (FIA). The linear relation of the electrocatalytic response of a composite electrode to amino acid concentration is observed to the level n × 10^?6 M in the static mode and n × 10^?9 M under FIA conditions.     

Graphene sheet for improving the electrocatalytic activity of a benzofuran derivative modified electrode for determination of epinephrine in the presence of serotonin

A nanocomposite system based on coumarin derivative and graphene sheet was used to prepare a new electrochemical sensor. The objective of the mentioned nanocomposite was to investigate novel electrochemical properties enabling the quantification of epinephrine (Ep). Cyclic voltammetry was used to study the redox properties of the mentioned modified electrode at different scan rates. Henceforward, the electrocatalytic oxidation of Ep at the surface of the modified electrode was considered. The data has shown excellent catalytic activity of the modified electrode for the electrooxidation of Ep, which leads to a reduction of overpotential for more than 238 mV. According to differential pulse voltammetry (DPV), the oxidation of Ep showed a dynamic range between 0.1 and 1000.0 μM and the detection limit (3s) of 0.011 μM. Besides, DPV was used for the determination of Ep at the mentioned modified electrode in the presence of serotonin.     

Electrochemical determination of acetaminophen in the presence of propranolol using an electrode modified with a Schiff base from 2-hydroxy-1-naphthaldehyde and ethylenediamine and multi-walled carbon nanotubes

A carbon paste electrode, modified with N,N′-bis-(2-hydroxy-1-naphthalidene)ethylenediamine and multi-walled carbon nanotubes (HNED-MWCNPE), was used for the determination of acetaminophen (ACOP) and propranolol (PP). Cyclic voltammetry (CV), chronocoulometry, chronoamperometry and differential pulse voltammetry (DPV) techniques were employed to study electro-oxidation of ACOP. The results revealed that the modified electrode showed an electrocatalytic activity toward the anodic oxidation of acetaminophen by a marked enhancement in the current response in buffered solution at pH 8.0. Some kinetic parameters such as the electron transfer coefficient (α) were also determined for the ACOP oxidation. The linear concentration range of 1 × 10^?3?1 × 10^?6 M with a detection limit of 4.6 × 10^?8 M (n = 16) for ACOP was obtained using DPV (pH 8.0). The modified electrode shows good sensitivity, selectivity and stability. The prepared electrode was also applied for the determination of ACOP in human blood serum.     

Voltammetric determination of sterically hindered phenols in surfactant-based self-organized media

Tert-butylhydroquinone (TBHQ), butylhydroxyanisole (BHA), and butylhydroxytoluene (BHT) are irreversibly oxidized on a glassy-carbon electrode in a medium of acetonitrile-Britton-Robinson buffer solution (1: 9, pH 3.0) at 0.61, 0.79, and 1.1 V, respectively, to give quinones. Micellar media of Triton X100,Brij® 35, and sodium dodecyl sulfate affect their oxidation. The splitting and suppression of the oxidation steps for sterically hindered phenols (SHP) is observed in the presence of nonionic surfactants. Sodium dodecyl sulfate considerably enhances anodic currents and also shifts positive potentials to lower values. The conditions of the differential-pulse voltammetric determination of SHP in a 0.1 M sodium dodecyl sulfate supporting electrolyte are found. The calibration graphs are linear in the ranges 2.02–1010, 2.34–1170, and 6.15–615 μM and the detection limits (S/N = 3) are 0.23, 0.18, and 3.5 μM for TBHQ, BHA, and BHT, respectively. The possibility of determining SHP in TBHQ-BHT and BHA-BHT mixtures in wide ranges of component concentration is demonstrated. A method is developed for the extraction-voltammetric determination of BHT in vegetable oils.     

Highly sensitive and selective electrochemical detection of L-cysteine using nanoporous gold

Nanoporous gold (NPG) with uniform pore sizes and ligaments was prepared by using a simple dealloying method. NPG electrodes exhibit excellent electrocatalytic activity towards the oxidation of CySH and the mechanism for the electrochemical reaction of CySH on NPG has been discussed. Interestingly, if the operating potential is fixed at 0.65 V, a strong current is observed and interferences by tryptophan and tyrosine are avoided. The calibration plot is linear in the concentration range from 1 μM to 400 μM (R²?=?0.994), and the quantification limit is as low as 50 nM. The NPG-modified electrode has good reproducibility, high sensitivity and selectivity, can be used to sense CySH in aqueous solution.

Detection of salicylic acid by electrocatalytic oxidation at a nickel-modified glassy carbon electrode

An electrochemical biosensor for the accurate determination of salicylic acid (SA) is prepared by potentiostatic deposition of nickel on the glassy carbon electrode (GCE). The electrochemical performance of the Ni/GCE film and the parameters affecting its activity are investigated by cyclic voltammetry, amperometry and electrochemical impedance spectroscopy (EIS). The electrooxidation of SA is significantly enhanced on Ni/GCE, compared to GCE. Indeed, the modified electrode has a fast response (less than 3 s) and excellent linear behavior over a wide SA concentration range (2 μM-0.55 mM) with a detection limit (LD) of 0.5 μM (signal/noise = 3) under the optimal conditions. Moreover, the stability and the reproducibility of the biosensor are satisfactorily evaluated.     

Electrochemical tyrosine sensor based on a glassy carbon electrode modified with a nanohybrid made from graphene oxide and multiwalled carbon nanotubes

We report on a glassy carbon electrode that was modified with a composite made from graphene oxide (GO) and multiwalled carbon nanotubes (MWCNT) that enables highly sensitive determination of L-tyrosine. The sensor was characterized by transmission electron microscopy and electrochemical impedance spectroscopy, and its electrochemical properties by cyclic voltammetry, chronocoulometry and differential pulse voltammetry. The GO/MWCNT hybrid exhibits strong catalytic activity toward the oxidation of L-tyrosine, with a well defined oxidation peak at 761 mV. The respective current serves as the analytical information and is proportional to the L-tyrosine concentration in two ranges of different slope (0.05 to 1.0 μM and 1.0 to 650.0 μM), with limits of detection and quantification as low as 4.4 nM and 14.7 nM, respectively. The method was successfully applied to the analysis of L-tyrosine in human body fluids. The excellent reproducibility, stability, sensitivity and selectivity are believed to be due to the combination of the electrocatalytic properties of both GO and MWCNT. They are making this hybrid electrode a potentially useful electrochemical sensing platform for bioanalysis.

Voltammetric determination of captopril using a novel ferrocene-based polyamide as a mediator and multi-wall carbon nanotubes as a sensor

A modified carbon paste electrode was prepared by incorporating multi-wall carbon nanotubes with a ferrocene-based polyamide (FDADO-IPC). A mixture of fine graphite powder with 10 wt % of multi-wall carbon nanotubes was applied to the preparation of the carbon paste (by dispersing in paraffin) that was finally modified with a ferrocene polyamide complex. The electrocatalytic oxidation of captopril (CAP) was investigated on the surface of the FDADO-IPC multi-wall carbon nanotubes modified carbon paste electrode (FDADO-IPC-MCNTPE) using cyclic voltammetry (CV), differential pulse voltammetry (DPV), chronoamperometry (CHA) and chronocoloumetry (CHC). Using the modified electrode, the kinetics of CAP electrooxidation was considerably enhanced by lowering the anodic overpotential through a catalytic fashion. A linear dynamic range of 0.2–200 μM for CAP was obtained in buffered solutions at pH 7.0. The detection limit was 0.08 μM. Differential pulse voltammetry as a simple, rapid, sensitive, and selective method was developed for the determination of CAP in tablet and human urine without any treatment.     

Sensitive determination of ATP using a carbon paste electrode modified with a carboxyl functionalized ionic liquid

We report on a new electrode for the determination of adenosine-5??-triphosphate (ATP). It is based on modified carbon paste electrode that contains an ionic liquid (IL) as the binder. The electrode shows strong electrocatalytic oxidative activity towards ATP at pH 4.5 in giving a well-defined single oxidation peak. The oxidation reaction is adsorption-controlled and due to the presence of the highly conductive IL. The electron transfer rate constant was calculated to be 2.04×10^?C3 s^?C1, and the surface coverage is 1.11×10^?C10 mol cm^?C2. Under the selected conditions, the oxidation peak current changes linearly with the concentration of ATP in the range from 5.0 to 1000???mol L^?1 and a detection limit of 1.67???mol L^?1 (3???) as determined by differential pulse voltammetry. The method displays good selectivity and was applied to the determination of ATP injection samples with satisfactory results.

Electrochemical behavior and voltammetric determination of L-tryptophan and L-tyrosine using a glassy carbon electrode modified with single-walled carbon nanohorns

We report a simple method for the direct and quantitative determination of L-tryptophan (Trp) and L-tyrosine (Tyr) using a glassy carbon electrode (GCE) modified with single-walled carbon nanohorns (SWCNHs). The SWCNH modified GCE exhibits high electrocatalytic activity towards the oxidation of both Trp and Tyr. It shows a linear response to Trp between 0.5 and 50 μM and to Tyr between 2 and 30 μM. The detection limits for Trp and Tyr are 50 nM and 400 nM, respectively. In addition, the modified GCE displays good selectivity and good sensitivity, thus making it suitable for the determination of Trp and Tyr in spiked serum samples.

A convergent paired electrochemical synthesis of new heterocyclic compounds. Reaction of benzoquinones with 3-Amino-4-hydroxycoumarin

Electrochemical oxidation of catechols (1) has been studied in the presence of cathodically generated 3-amino-4-hydroxycoumarin (3a) as a nucleophile in aqueous solutions, using cyclic voltammetry and controlled-potential coulometry. The results indicate that the o-benzoquinones derived from catechols (1) participate in Michael addition reaction with 3-amino-4-hydroxycoumarin (3a) to form the corresponding new heterocyclic compounds (7) (oxidized form of coumestan derivatives). The electrochemical process consists of a multi-step including (a) cathodic reduction of 4-hydroxy-3-nitrocoumarin (3) to 3-amino-4-hydroxycoumarin (3a), (b) anodic oxidation of catechols (1) to related o-benzoquinone (2), (c) the Michael addition reaction of 3-amino-4-hydroxycoumarin (3a) to o-benzoquinone (2), and (d) anodic oxidation of formed adduct. The paired electrochemical synthesis of compounds 7a and 7b has been successfully performed in a one-pot process at carbon rods as working and counter electrodes in an undivided cell.     

Electrochemical synthesis of a novel platinum nanostructure on a glassy carbon electrode, and its application to the electrooxidation of methanol

We show that the addition of white dextrin during the electrochemical deposition of platinum nanostructures (nano-Pt) on a glassy carbon electrode (GCE) results in an electrochemically active surface that is much larger than that of platinum microparticles prepared by the same procedure but in the absence of dextrin. The nano-Pt deposits are characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy, and electrochemical methods. The SEM images reveal deposits composed of mainly nanoparticles and short nanorods. The GCE was applied as a novel and cost-effective catalyst for methanol oxidation. The use of nano-Pt improves the electrocatalytic activity and the stability of the electrodes.

Glassy carbon electrode modified with poly-Neutral Red for photoelectrocatalytic oxidation of NADH

A new approach is described for the photoelectrocatalytic oxidation of Reduced ß-Nicotinamide Adenine Dinucleotide (NADH). It is based on a glassy carbon electrode (GCE) modified with a film of poly-Neutral Red (poly-NR) that is obtained by electropolymerization. Electrochemical measurements revealed that the modified electrode displays electrocatalytic and photo-electrocatalytic activity towards oxidation of NADH. If irradiated with a 250-W halogen lamp, the electrode yields a strongly increased electrocatalytic current compared to the current without irradiation. Amperometric and photo-amperometric detection of NADH was performed at +150 mV vs. Ag/AgCl/KCl_sat and the currents obtained are linearly related to the concentration of NADH. Linear calibration plots are obtained in the concentration range from 1.0 μM to 1.0 mM for both methods. However, the slope of the current-NADH concentration curve of the photo-electrocatalytic procedure was 2-times better than that obtained without irradiation.

Sputtering deposition of Pt nanoparticles on vertically aligned multiwalled carbon nanotubes for sensing L-cysteine

A highly sensitive electrochemical sensor for determination of L-cysteine (CySH) is presented. It is based on vertically aligned multiwalled carbon nanotubes modified with Pt nanoparticles by magnetron sputtering deposition. The morphology of the nanocomposite was characterized by scanning electron microscopy, transmission electron microscopy and energy-dispersive. The electrochemistry of CySH was investigated by cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The mechanism for the electrochemical reaction of CySH at the modified electrode at different pH values is discussed. The electrode exhibits a higher electrocatalytic activity towards the oxidation of CySH than comparable other electrodes. It displays a linear dependence (R ²?=?0.9980) on the concentration of CySH in the range between 1 and 500 μM and at an applied potential of +0.45 V, a remarkably low detection limit of 0.5 μM (S/N?=?3), and an outstandingly high sensitivity of 1.42?×?10³ μA?mM^?1?cm^?2, which is the highest value ever reported. The electrode also is highly inert towards other amino acids, creatinine and urea. The sensor was applied to the determination of CySH in urine with satisfactory recovery, thus demonstrating its potential for practical applications.

Trialkylantimony(V) o-amidophenolates: Electrochemical transformations and antiradical activity

The electrochemical transformations and antiradical activity of trialkylantimony(V) o-amidophenolate derivatives, (AP)SbR₃ (AP = 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-amidophenolate); R = CH₃ (I), C₂H₅ (II), and C₆H₁₁ (III), are studied. The electrochemical oxidation of compounds I–III proceeds successively to form mono- and dicationic forms of the complexes. The presence of the donor hydrocarbon groups at the antimony(V) atom shifts the oxidation potentials to the cathodic range and decreases the stability of the monocationic complexes formed in electrochemical oxidation. The second anodic process is irreversible and accompanied by o-iminoquinone decoordination. The antiradical activity of compounds I–III is studied in the reaction with the diphenylpicrylhydrazyl radical and oleic acid autooxidation. The values obtained for indices EC₅₀ and IC₅₀ indicate the antiradical activity of the studied compounds. Complexes I–III were found to be the efficient inhibitors of oleic acid oxidation and act as efficient destructors of hydroperoxides.     

Investigation of the electro-oxidation and oxidation of catechol in the presence of sulfanilic acid

The electrochemical oxidation of catechol (1) in the presence of sulfanilic acid (2) was investigated. Some electrochemical (EC) techniques such as cyclic voltammetry and controlledpotential coulometry were used. The oxidation reaction of catechol (1) with periodate in the presence of sulfanilic acid (2) was also investigated spectrophotometrically. The results indicate that the o-quinone derived from catechol participate in Michael addition reaction with sulfanilic acid (2). In addition, according to the ECE mechanism, the observed homogeneous rate constant (k _obs) for the reaction ofo-quinone derived from catechol (1) with sulfanilic acid (2) has been estimated by digital simulation of cyclic voltammograms.     

A nanomaterial composed of cobalt nanoparticles, poly(3,4-ethylenedioxythiophene) and graphene with high electrocatalytic activity for nitrite oxidation

We have investigated the oxidative electrochemistry of nitrite on glassy carbon electrodes modified with cobalt nanoparticles, poly(3,4-ethylenedioxythiophene) (PEDOT), and graphene. The modified electrode was characterized by cyclic voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy. The results suggest that this new type of electrode combines the advantages of PEDOT-graphene films and cobalt nanoparticles and exhibits excellent electrocatalytic activity towards the oxidation of nitrite. There is a linear relationship between the peak current and the nitrite concentration in the range from 0.5?μM to 240?μM, and the detection limit is 0.15?μM. The modified electrodes also enable the determination of nitrite at low potentials where the noise level and interferences by other electro-oxidizable compounds are weak.

A sensitive and selective nitrite sensor based on a glassy carbon electrode modified with gold nanoparticles and sulfonated graphene

We describe a highly sensitive and selective amperometric sensor for the determination of nitrite. A glassy carbon electrode was modified with a composite made from gold nanoparticles (AuNPs) and sulfonated graphene (SG). The modified electrode displays excellent electrocatalytic activity in terms of nitrite oxidation by giving much higher peak currents (at even lower oxidation overpotential) than those found for the bare electrode, the AuNPs-modified electrode, and the SG-modified electrode. The sensor has a linear response in the 10 μM to 3.96 mM concentration range, a very good detection sensitivity (45.44 μA mM^?1), and a lower detection limit of 0.2 μM of nitrite. Most common ions and many environmental organic pollutants do not interfere. The sensor was successfully applied to the determination of nitrite in water samples, and the results were found to be consistent with the values obtained by spectrophotometry.

Voltammetric determination of bisphenol A in food package by a glassy carbon electrode modified with carboxylated multi-walled carbon nanotubes

A highly sensitive and mercury-free method for determination of bisphenol A (BPA) was established using a glassy carbon electrode that was modified with carboxylated multi-walled carbon nanotubes. A sensitive oxidation peak is found at 550?mV in linear sweep voltammograms at pH?7. Based on this finding, trace levels of bisphenol A can be determined over a concentration range that is linear from 10?nM to 10⁴?nM, the correlation coefficient being 0.9983, and the detection limit (S/N?=?3) being 5.0?nM. The method was successfully applied to the determination of BPA in food package.

A glassy carbon electrode modified with poly(eriochrome black T) for sensitive determination of adenine and guanine

A thin film of poly(eriochrome black T) was deposited on the surface of glassy carbon electrode by cyclic voltammetry, and this system is shown to enable the sensitive determination of adenine (A) and guanine (G). Scanning electron microscopy, Fourier transform infrared spectroscopy and electrochemical impedance spectroscopy were carried out to characterize the film which exhibits excellent electrocatalytic activity toward the oxidation of A and G in 0.1 M phosphate buffer solution (pH 4.0). Square wave voltammetry reveals an oxidation peak at 1084 mV whose current is linearly related to the concentration of A in the range from 0.05 to 1.00 μM. The oxidation peak for G occurs at 788 mV, and its current is linearly related to the concentration of G in the range from 0.025 to 1.00 μM. The detection limits are 0.017 μM for A and 0.008 μM for G (at S/N?=?3), respectively. The modified electrode displays good reproducibility and selectivity for the determination of A and G. The sensor was applied to quantify A and G in fish sperm DNA with satisfactory results.