Focusing of atomic and molecular particles upon channeling in chiral carbon nanotubes

The focusing of atomic and molecular particles near the nanotube axis using a model of a carbon nanotube (CNT) with discrete arrangement of atoms in its wall is studied. The degree of focusing of channeling particles in CNTs depends not only on the diameter of the CNTs, but also on its chirality. It is shown that the concentration of channeling particles in the tube’s central part is higher for chiral nanotubes.     

X-ray irradiation effect of double walled carbon nanotube

We have studied double-walled carbon nanotube (DWNT) irradiated by soft X-ray by Raman scattering spectroscopy and the spectral characteristics are compared to single-walled carbon nanotube (SWNT) irradiated under the same condition. We proved that DWNT is more stable for the X-ray induced defect formation than SWNT. Moreover, we found that the outer tube of DWNT was more sensitive on X-ray irradiation than the inner tube. The defect was recovered by annealing in Ar at lower temperature than that of SWNT. Based on these results, we inferred that X-ray irradiation leads to formation of interstitial-vacancy pairs, Frenkel defects, in carbon nanotube. The interstitial-vacancy separation on the inner tube of DWNT is conceivably shorter than that of the outer tube.     

卷曲方式对Rh原子在单壁碳纳米管内外吸附的影响

碳纳米管曲率与卷曲方式是同时存在并影响金属原子在碳纳米管内外吸附行为的重要因素, 单独研究卷曲方式对金属吸附行为的影响较困难. 选取曲率相近、卷曲方式不同的扶手椅型(6, 6)、锯齿型(10, 0)与手性(8, 4)单壁碳纳米管(SWCNT), 利用密度泛函理论研究了Rh原子在SWCNT内外的吸附行为. 构型优化表明:由于SWCNT卷曲方式不同, 导致Rh原子在(6, 6),(10, 0)与(8, 4)SWCNT内外吸附的稳定构型不同; 不同卷曲方式亦使SWCNT与Rh原子相互作用的C原子不同, 导致Rh 关键词： 密度泛函理论 单壁碳纳米管 Rh原子 卷曲方式     

Terahertz current oscillations in single-walled zigzag carbon nanotubes

We report time-dependent terahertz current oscillations on an n=10 single-walled zigzag carbon nanotube (CNT) that is 100 nm long. To obtain transport characteristics in this CNT, we developed an ensemble Monte Carlo (MC) simulator, which self-consistently calculates the electron transport and electrical potential. The ensemble MC simulations indicate that, under certain dc bias and doping conditions, the average electron velocity and concentration oscillate. This leads to current oscillations in space and time, on the tube, and at the contacts. We attribute this to accumulation and depletion of the CNT electrons at different locations on the tube, giving rise to low and high density electron regions. These local dipoles are a result of intra- and intersubband scatterings and different subband dispersion relations. This in turn forms propagating dipoles and current oscillations.     

Photogalvanic effects in heteropolar nanotubes

We show that an electrical shift current is generated when electrons are photoexcited from the valence to conduction bands on a BN nanotube. This photocurrent follows the light pulse envelope and its symmetry is controlled by the atomic structure of the nanotube. We find that the shift current has an intrinsic quantum mechanical signature in which the chiral index of the tube determines the direction of the current along the tube axis. We identify the discrete lattice effects in the tangent plane of the tube that lead to an azimuthal component of the shift current. The nanotube shift current can lead to ultrafast optoelectronic and optomechanical applications.     

Molecular dynamic investigation of mechanical properties of armchair and zigzag double-walled carbon nanotubes under various loading conditions

Using molecular dynamic simulation (MDS), effects of chirality and Van der Waals interaction on Young's modulus, elastic compressive modulus, bending, tensile, and compressive stiffness, and critical axial force of double-walled carbon nanotube (DWCNT) and its inner and outer tubes are considered. Achieving the highest safety factor, mechanical properties have been investigated under applied load on both inner and outer tubes simultaneously and on each one of them separately. Results indicate that as a compressive element, DWCNT is more beneficial than single-walled carbon nanotube (SWCNT) since it carries two times higher compression before buckling. Except critical axial pressure and tensile stiffness, in other parameters zigzag DWCNT shows higher amounts than armchair type. Outer tube has lower strength than inner tube; therefore, most reliable design of nanostructures can be attained if the mechanical properties of outer tube taken as the properties of DWCNT.     

Determination of optical isomers for left-handed or right-handed chiral double-wall carbon nanotubes

The handedness relationship between adjacent layers in nested double-wall carbon nanotubes (DWNTs) has been investigated for the first time. Our high-resolution electron microscopy analysis on a series of specimen tilts can successfully tell the handedness of each constituent nanotube in a DWNT, and therefore the chiral indices (n, m) including their optical isomers [(n, m) or (m, n)] of inner and outer nanotubes can be uniquely determined. It is shown that right-handed and left-handed nanotubes are equally distributed for both the inner and outer nanotubes in the examined specimens and a preferable handedness relationship between the adjacent layers in DWNT may exist.     

Codoping of Potassium and Bromine in Carbon Nanotubes： A Density Functional Theory Study

We investigate the co-doping of potassium and bromine in single-walled carbon nanotubes （SWCNTs） and doublewalled carbon nanotubes （DWCNTs） based on density functional theory. In the co-doped （6,0） SWCNTs, the 4s electron of potassium is transferred to nanotube and Br, leading to the n-type feature of SWCNTs. When potassium is intercalated into inner tube and bromine is put on outer tube, the positive and negative charges reside on the outer and inner tubes of the （7,0）@（16,0） DWCNT, respectively. It is expected that DWCNTs would be an ideal candidate for p-n junction and diode applications.     

First-principles study on structural and electronic properties of copper nanowire encapsulated into GaN nanotube

We present a systemic study of the structural and electronic properties of Cu_n nanowires (n=5, 9 and 13) encapsulated in armchair (8,8) gallium nitride nanotubes (GaNNTs) using the first-principles calculations. We find that the formation processes of these systems are all exothermic. The initial shapes are preserved without any visible changes for the Cu₅@(8,8) and Cu₉@(8,8) combined systems, but a quadratic-like cross-section shape is formed for the outer nanotube of the Cu₁₃@(8,8) combined system due to the stronger attraction between nanowire and nanotube. The electrons of Ga and N atoms in outer GaN sheath affect the electron conductance of the encapsulated metallic nanowire in the Cu₁₃@(8,8) combined system. But in the Cu₅@(8,8) and Cu₉@(8,8) combined systems, the conduction electrons are distributed only on the copper atoms, so charge transport will occur only in the inner copper nanowire, which is effectively insulated by the outer GaN nanotube. Considering the maximal metal filling ratio in nanotube, we know that the Cu₉@(8,8) combined system is top-priority in the ultra-large-scale integration (ULSI) circuits and micro-electromechanical systems (MEMS) devices that demand steady transport of electrons.     

Boron carbon nanotube superlattices: Geometry, electronic structure and quantum conductance

The stable boron carbon nanotube superlattices (BCNTSLs) that are constructed by periodically connecting carbon nanotube (CNT) and boron nanotube (BNT) with different lengths and diameters are predicted by employing the density functional first-principles calculations. The geometrical and electronic structures as well as quantum conductance of BCNTSLs are studied. It is found that the superlattices can be metallic or semiconducting depending on tube diameters and the ratio of BNT to CNT segments in a periodic unit. The confined states in the superlattice are observed. The present study could offer a useful way for designing some functional nanodevices.     

Aharonov-Bohm interference and beating in single-walled carbon-nanotube interferometers

Relatively low magnetic fields applied parallel to the axis of a chiral single-walled carbon nanotube are found causing large modulations to the p channel or valence band conductance of the nanotube in the Fabry-Perot interference regime. Beating in the Aharonov-Bohm type of interference between two field-induced nondegenerate subbands of spiraling electrons is responsible for the observed modulation with a pseudoperiod much smaller than that needed to reach the flux quantum Phi0 = h/e through the nanotube cross section. We show that single-walled nanotubes represent the smallest cylinders exhibiting the Aharonov-Bohm effect with rich interference and beating phenomena arising from well-defined molecular orbitals reflective of the nanotube chirality.     

Reactor scale modeling of multi-walled carbon nanotube growth

As the mechanisms of carbon nanotube (CNT) growth becomes known, it becomes important to understand how to implement this knowledge into reactor scale models to optimize CNT growth. In past work, we have reported fundamental mechanisms and competing deposition regimes that dictate single wall carbon nanotube growth. In this study, we will further explore the growth of carbon nanotubes with multiple walls. A tube flow chemical vapor deposition reactor is simulated using the commercial software package COMSOL, and considered the growth of single- and multi-walled carbon nanotubes. It was found that the limiting reaction processes for multi-walled carbon nanotubes change at different temperatures than the single walled carbon nanotubes and it was shown that the reactions directly governing CNT growth are a limiting process over certain parameters. This work shows that the optimum conditions for CNT growth are dependent on temperature, chemical concentration, and the number of nanotube walls. Optimal reactor conditions have been identified as defined by (1) a critical inlet methane concentration that results in hydrogen abstraction limited versus hydrocarbon adsorption limited reaction kinetic regime, and (2) activation energy of reaction for a given reactor temperature and inlet methane concentration. Successful optimization of a CNT growth processes requires taking all of those variables into account.     

Vibrational analysis of double-walled carbon nanotubes with inner and outer nanotubes of different lengths

In this study, the Euler-Bernoulli beam model is used to analyze the resonant vibration of double-walled carbon nanotubes (DWCNTs) with inner and outer nanotubes of different lengths. The resonant properties of DWCNTs with different inner and outer nanotube lengths are investigated in detail using this theoretical approach. The resonant vibration is significantly affected by the vibrational modes of the DWCNTs, and by the lengths of the inner and outer nanotubes. For an inner or outer nanotube of constant length, the vibrational frequencies of the DWCNTs increase initially and then decrease as the length of another nanotube increases. A design for nanoelectromechanical devices that operate at various frequencies can be realized by controlling the length of the inner and outer nanotubes of DWCNTs. This investigation may be helpful in applications of carbon nanotubes such as high frequency oscillators, dynamic mechanical analysis and mechanical sensors.     

Molecular dynamics investigation into the electric charge effect on the operation of ion-based carbon nanotube oscillators

The fabrication of nanoscale oscillators working in the gigahertz (GHz) range and beyond has now become the focal center of interest to many researchers. Motivated by this issue, this paper proposes a new type of nano-oscillators with enhanced operating frequency in which both the inner core and outer shell are electrically charged. To this end, molecular dynamics (MD) simulations are performed to investigate the mechanical oscillatory behavior of ions, and in particular chloride ion, tunneling through electrically charged carbon nanotubes (CNTs). It is assumed that the electric charges with similar sign and magnitude are evenly distributed on two ends of nanotube. The interatomic interactions between carbon atoms and van der Waals (vdW) interactions between ion and nanotube are respectively modeled by Tersoff-Brenner and Lennard-Jones (LJ) potential functions, whereas the electrostatic interactions between ion and electric charges are modeled by Coulomb potential function. A comprehensive study is conducted to get an insight into the effects of different parameters such as sign and magnitude of electric charges, nanotube radius, nanotube length and initial conditions (initial separation distance and velocity) on the oscillatory behavior of chloride ion-charged CNT oscillators. It is shown that, the chloride ion frequency inside negatively charged CNTs is lower than that inside positively charged ones with the same magnitude of electric charge, while it is higher than that inside uncharged CNTs. It is further observed that, higher frequencies are generated at higher magnitudes of electric charges distributed on the nanotube.     

Solidification of gold nanoparticles in carbon nanotubes

The structure and the solidification of gold nanoparticles in a carbon nanotube are investigated using molecular dynamics simulations. The simulations indicate that the predicted solidification temperature of the enclosed particle is lower than its bulk counterpart, but higher than that observed for clusters placed in vacuum. A comparison with a phenomenological model indicates that, in the considered range of tube radii (R(CNT)) of 0.5 < R(CNT) < 1.6 nm, the solidification temperature depends mainly on the length of the particle with a minor dependence on R(CNT).     

通量可控的双壁碳纳米管水分子泵

以双壁碳纳米管作为基本单元设计了一种新型纳米机械水泵, 其内管固定作为水分子通道, 外管做活塞式轴向运动. 分子动力学计算表明, 水分子净通量及管内水分子电偶极矩分布均与外管运动速率有强烈耦合效应. 该设计可以实现水分子的高效单向运输, 且输运效率可以通过外管活塞运动的速率进行调控. 这些发现可为未来实用纳米分子泵器件的设计提供新的思路.     

单壁碳纳米管受限空间内水的分布

碳纳米管管腔作为分子物质的纳米通道,其储存或输送水的能力具有重要研究价值.为了研究碳纳米管管腔受限空间对水分子团簇结构和分布的影响,本文采用分子动力学方法探究了管径、手性和温度对单壁碳纳米管管腔内水的结构和分布的影响.结果表明:在常温下,管径尺寸范围为1.018—1.253 nm的单壁碳纳米管管内易形成有序的多元环水结构,此范围以外碳纳米管管内难以形成水的有序结构;且随着管径尺寸增大,多元环水呈现由三元环至六元环的结构变化;范德瓦耳斯势分布分析表明,在上述管径范围内,水分子趋向于贴近碳纳米管管壁分布而形成水的有序结构.对比管径尺寸差别较小的碳纳米管,其手性对多元环水结构影响不大.多元环水结构的稳定性表现出温度依赖性,管径较大的碳纳米管内的多元环水的有序结构更易随温度升高而消失.     

Behavior of H2O molecule in carbon nanotube/boron nitride nanotube heterostructure

We perform total-energy electronic-structure calculations of a water molecule inside a (7, 7) carbon nanotube/boron nitride nanotube (CNT/BNNT) heterojunction. The van der Waals interaction is also considered in this study. We find that the equilibrium distance between the water molecule and the wall of the CNT (BNNT) is ≈ 3.3 Å, and the encapsulation energy is 0.22 eV (0.25 eV). The energy profile along the tube axis exhibits a dramatic change in the vicinity of the heterojunction. A speed change of water flow is expected to occur near the heterojunction. Such information would provide valuable insight in nanostructure design for nanofluidics.     

Translocation of DNA oligonucleotide through carbon nanotube channels under induced pressure difference

This paper presents molecular dynamics (MD) simulations of DNA oligonucleotide and water molecules translocating through carbon nanotube (CNT) channels. Induced pressure difference is applied to the system by pushing a layer of water molecules towards the flow direction to drive the oligonucleotide and other molecules. This novel MD simulation investigates the flow behaviour of oligonucleotide and water molecules in nanochannel while controlling the temperature and volume of the system in canonical ensemble. The results show that the oligonucleotide is unable to translocate through the (8, 8)-(12, 12) CNT channel under the induced pressures applied. However, the oligonucleotide can transport through the (10, 10)-(14, 14) CNT channel easily under the same induced pressures. It is observed that less water molecules permeate through the center of the (8, 8)-(12, 12) CNT channel as the strength of the induced pressure is increased. In contrast, more water molecules flow through the (10, 10)-(14, 14) CNT channel at a higher induced pressure. The conformational energy of the oligonucleotide in the CNT channels has been shown to be affected by both the strength of the induced pressure and the size of the nanotube. Although the interactive force between oligonucleotide and CNT channel is dependent on their distance apart, the induced pressure within the (8, 8)-(12, 12) nanotube channel acts as an external factor that affects the distance between the oligonucleotide and the CNT junction. The insertion depth of the oligonucleotide in the (8, 8)-(12, 12) CNT channel relies on the magnitude of the induced pressure. Both the velocity of oligonucleotide and the interactive force between oligonucleotide and nanotube wall are shown to increase when the oligonucleotide is travelling through the narrower part of the (10, 10)-(14, 14) CNT channel.     

螺旋上升对自激发锯齿型双壁碳纳米管振荡行为的影响

运用分子动力学方法模拟了锯齿型双壁碳纳米管体系的振荡行为,其中旋转的内管施加了不同大小的螺旋上升长度.不同于以前关于扶手椅型碳纳米管的工作(Zeng Y H,et al.2016 Nanotechnology 27 95705),锯齿型的内管在施加了不同大小的螺旋上升长度之后,其管壁结构会产生畸变或缺陷.模拟过程中,锯齿型内管在施加一定的旋转速度以后保持自由,而固定的外管为无任何缺陷的理想锯齿型碳纳米管.分子动力学模拟结果显示锯齿型内管的轴向振荡行为与内管施加的螺旋上升长度密切相关.内管的振荡频率随着内管螺旋上升长度的增加而增加.但当内管的螺旋上升长度较大时,由于螺旋上升所引起的内管缺陷结构造成整个内管的破裂,从而导致其无法进行稳定的轴向振荡.模拟结果还显示,对于无螺旋上升的理想锯齿型碳管,虽然其轴向振荡效果非常微弱,但却可以作为一种具有恒定旋转频率的旋转致动器.此外,对螺旋上升长度为0.5 nm的内管在不同温度下的振荡性能进行了模拟分析,结果表明内管振荡的幅度随温度的升高而相应地增加,但当温度超过一定的临界值后,内管不能保持稳定的振荡.