Copper catalyzed 1,3-dipolar cycloaddition reaction of azides with N-(2-trifluoroacetylaryl)propargylamines: A mild entry to novel 1,4-disubstituted-[1,2,3]-triazole derivatives

The synthesis of N-(2-trifluoroacetylaryl)propargylamines 10-14 and 17 is presented. The copper(I) catalyzed cycloaddition reaction of these propargylamines (dipolarophiles) with a series of azides (1,3-dipoles) 18-20, 21 and 24 was found to proceed smoothly in dimethylsulfoxide at room temperature, to furnish the corresponding 1,4-disubstituted-[1,2,3]triazole derivatives 26-36 in moderate to good yields.     

Synthesis of 5-alkyl(or aryl)pyrrolo[1,2-a]quinoxalin-4(5H)-ones by denitrocyclisation of N-alkyl(or aryl)-1-(2-nitrophenyl)-1H-pyrrole-2-carboxamides. Evidence of a Smiles rearrangement

An efficient method for the synthesis of hitherto unknown alkyl(or aryl)pyrrolo[1,2-a]quinoxalin-4(5H)-ones 8a-g, 16 and 17 has been established. The method is based on the synthesis of the corresponding N-alkyl(or aryl)-1-(2-nitrophenyl)-1H-pyrrole-2-carboxamides 3a-c and 7a-c,e which undergo denitrocyclisation with NaH in DMF in 4.5 or 2 h. When 3a was treated with NaH in DMF for 30 min the product of a Smiles rearrangement, 9, was isolated. Under similar conditions but for 4.5 h 9 was converted into 8a. This confirms the involvement of a Smiles rearrangement during the denitrocyclisation process. Conversion of 3b into isomeric pyrroloquinoxalinones 12 and 13 confirms a process involving two pathways, direct denitrocylisation of 3b and Smiles rearrangement of 3b followed by denitrocylisation, respectively. Furthermore, denitrocylisation of 7d into pyrroloquinoxalinones 16 and 17 suggests that similar cyclisation pathways are followed by N-arylcarboxamides.     

Total Synthesis of Amphidinolide E and Amphidinolide E Stereoisomers

Four amphidinolide E stereoisomers, amphidinolide E (1), 2-epi-amphidinolide E (2), 19-epi-amphidinolide E (3), and 2-epi-19-epi-amphidinolide E (4), have been synthesized via the judicious union of aldehyde 5, allylsilanes 7 or 8, acids 9 or 10, and vinylstannane 6. The C19 stereocenters of the C19 epimeric allylsilanes 7 and 8 were introduced via crotylboration reactions early in the synthesis. [3+2] Annulation reactions of aldehyde 5 with allylsilanes 7 and 8 were employed to set the core tetrahydrofuran units of 1-4. Finally, the C2 stereocenter was installed by esterification using acid 9, without incident, or with acid 10, in which case an unexpected and completely stereoselective inversion of C2 occurs.     

First synthesis of nitro-substituted 2,2-diphenyl-2H-1-benzopyrans via the ipso-nitration reaction

The first synthesis of a series of nitro-substituted 2,2-diphenyl-2H-1-benzopyrans is reported. Our synthetic approach is based on a linear synthesis in two steps from appropriate brominated 2,2-diphenyl-2H-1-benzopyrans 12-17, which requires the preliminary preparation of bromophenols 7-11. These latter were easily obtained by the reaction of phenols 1-5 with a mild and selective brominating agent tetrabutylammonium tribromide (TBA·Br₃). The key intermediates 12-17 were efficiently elaborated through an univocal classic chromenization between the commercially available 1,1-diphenyl-2-yn-1-ol and the brominated phenols 6-11. The compounds 12-17 so obtained were converted into arylboronic acids 18-23 by a metalation/boronylation sequence, followed by acid hydrolysis. From advanced building blocks 18-23, the introduction of nitro group, which constitutes the ultimate step of our strategy, was achieved by an ipso-nitration reaction using the Crivello's reagent. This highly selective method provides only the ipso-nitrated products 24-29 in moderate to high yield.     

Synthesis of stereopure acyclic 1,5-dimethylalkane chirons: building blocks of highly methyl-branched natural products

An efficient synthetic method towards stereopure acyclic 1,5-dimethylalkane building blocks from methyl (2R)-3-hydroxy-2-methylpropionate (R)-1 (>99% ee) and methyl (2S)-3-hydroxy-2-methylpropionate (S)-1 (>99% ee) through a series of chemical transformations, including Julia–Kocienski olefination and diimide reduction, is described. Through this strategy, two fragments of β-d-mannosyl phosphomycoketide (C₃₂-MPM) and four stereopure 1,5-dimethylalkane C₁₀ chirons are prepared. These C₃₂-MPM fragments and C₁₀ chirons have shown great potential application as building blocks for the synthesis of highly methyl-branched natural products containing chiral oligoisoprenoid-like chains.     

Palladium-catalyzed asymmetric synthesis of allylic alcohols from unsymmetrical and symmetrical racemic allylic carbonates featuring C-O-bond formation and dynamic kinetic resolution

Described is the asymmetric synthesis of the allylic alcohols 11 (85% ee), 15 (99% ee), 17 (93% ee), 19 (61% ee), and 21 (69% ee) through a Pd-catalyzed reaction of the unsymmetrical carbonates rac-10, rac-12, rac-14, rac-16, rac-18, and rac-20, respectively, with KHCO₃ and H₂O in the presence of bisphosphane 6. Similarly the allylic alcohols 23 (99% ee) and 25 (97% ee) have been obtained from the symmetrical carbonates rac-22 and rac-24, respectively. Reaction of the meso-biscarbonate 26 with H₂O and Pd(0)/6 afforded alcohol 27 (96% ee), which was converted to the PG building block 32. The unsaturated bisphosphane 33 showed in the synthesis of alcohols 36, 37, and 39 a similar high selectivity as 6. The formation of alcohols 11, 15, and 17 involves an efficient dynamic kinetic resolution.     

[Cu4OCl6(DABCO)2]·0.5DABCO·4CH3OH (“MFU-5”): Modular synthesis of a zeolite-like metal-organic framework constructed from tetrahedral {Cu4OCl6} secondary building units and linear organic linkers

A novel metal-organic framework (MOF) based on a tetranuclear copper cluster and a linear organic ligand formulated as [Cu₄OCl₆(DABCO)₂]·0.5DABCO·4CH₃OH (denoted as MFU-5, MFU=Metal-Organic Framework, Ulm University; DABCO=1,4-diazabicyclo[2.2.2]octane), was prepared via solvothermal synthesis. In contrast with common MOF synthesis strategies, MFU-5 is assembled from pre-defined molecular secondary building units, i.e. {Cu₄OCl₆} moieties, which become the nodes of the coordination framework. The title compound was characterized by single crystal X-ray diffraction, variable temperature powder diffraction (VT-XRPD), thermal analysis, as well as IR- and UV/Vis spectroscopy. Crystal data for MFU-5: hexagonal, P6/mcc (no. 192), a=25.645(9), c=17.105(11) Å, V=9742(8) Å³, Z=12, 1690 structure factors, R[F²>2σ(F²)]=0.049. MFU-5 is a 3D metal-organic framework with 1D channels running along the c-axis hosting DABCO and methanol solvent molecules. The framework displays a zeolite-like structure constructed from mso cages, which represents the composite building units in the zeolites SSF, MSO and SZR. Two-fold interpenetration is observed between these building units. TG/DTA-MS and VT-XRPD characterization reveal a stepwise release of methanol and DABCO molecules upon heating, eventually resulting in a structural change into a non-porous material.     

Two-directional total synthesis of efomycine M and formal total synthesis of elaiolide

The anti-inflammatory agent efomycine M (1) has been synthesized from macrodilactone 38 and vinyliodide 42 by a two-directional total synthesis in 17 steps over the longest linear sequence with an overall yield of 7%. The C₂-symmetric macrodiolide 38 has been prepared by Yamaguchi macrolactonization of seco-acid 26. The central stereopentad of 1 was obtained by a highly efficient anti-aldol reaction followed by a diastereoselective ketone reduction. Additionally, we have completed a formal total synthesis of elaiolide (3) by converting macrodiolide 37 into Paterson's methylketone 13.     

Studies on the Synthesis of Reidispongiolide A: Stereoselective Synthesis of the C(22)-C(36) Fragment

A highly stereoselective synthesis of the C(22)-C(36) fragment 2 of reidispongiolide A is described. This synthesis features the highly stereoselective mismatched double asymmetric crotylboration reaction of the aldehyde derived from 5 and the new chiral reagent (S)-(E)-7 that provides 12 with >15:1 dr. Subsequent coupling of the derived vinyl iodide 3 with aldehyde 16 provided allylic alcohol 17, that was elaborated by three steps into the targeted reidispongiolide fragment 2.     

(R)-2,3-Cyclohexylideneglyceraldehyde, a novel template for facile and simple entry into chiral hydroxy γ-lactones: synthesis of (−)-muricatacin

(R)-2,3-Cyclohexylideneglyceraldehyde 1 has been used in a simple and efficient synthesis of (−)-muricatacin 10. The required chiron, syn-alkanetriol 2a was prepared by the reduction of a ketone 3 derived from 1.     

Tandem radical cyclization-based strategy for the synthesis of oxa- and aza-cages: a case of fragmentation versus cyclization

A new strategy for the synthesis of oxa- and aza-cage compounds based on tandem radical cyclizations is described. The iodides 1 lead to oxa-cages 3 after two tandem radical cyclizations. The ester 10aa on reaction with n-Bu₃SnH and AIBN gives rise to the oxa-cage 12aa after two tandem 5-exo-trig cyclizations. On the other hand, reaction of the ketones 17aa and 21 under similar conditions furnished the oxa-cages 20aa and 23, respectively, via a double 5-exo-trig tandem radical cyclization followed by fragmentation.     

Total synthesis of (+)-epiepoformin, (+)-epiepoxydon and (+)-bromoxone employing a useful chiral building block, ethyl (1R,2S)-5,5-ethylenedioxy-2-hydroxycyclohexanecarboxylate

Enantioselective total synthesis of (+)-epiepoformin 1, (+)-epiepoxydon 2 and (+)-bromoxone 3 using a chiral building block, ethyl (1R,2S)-5,5-ethylenedioxy-2-hydroxycyclo- hexanecarboxylate 6, is described. Since the synthesis afforded intermediates 18, 2 and 25, it accomplished a formal synthesis of (−)-theobroxide 19, (−)-phyllostine 22, (+)-herveynone 27 and (−)-asperpentyn 28. The usefulness of 6 for the synthesis of natural epoxycyclohexene derivatives was demonstrated.     

On the microstructure and symmetry of apparently hexagonal BaAl2O4

The P6₃ (a=2a_p, b=2b_p, c=c_p) crystal structure reported for BaAl₂O₄ at room temperature has been carefully re-investigated by a combined transmission electron microscopy and neutron powder diffraction study. It is shown that the poor fit of this P6₃ (a=2a_p, b=2b_p, c=c_p) structure model for BaAl₂O₄ to neutron powder diffraction data is primarily due to the failure to take into account coherent scattering between different domains related by enantiomorphic twinning of the P6₃22 parent sub-structure. Fast Fourier transformation of [0 0 1] lattice images from small localized real space regions (∼10 nm in diameter) are used to show that the P6₃ (a=2a_p, b=2b_p, c=c_p) crystal structure reported for BaAl₂O₄ is not correct on the local scale. The correct local symmetry of the very small nano-domains is most likely orthorhombic or monoclinic.     

Synthesis and reactions of sulfur-substituted indolizidinones

An aza-Diels-Alder reaction product 2 was readily converted to a tetrahydropyridine derivative 6, but its N-benzyl group was unexpectedly difficult to cleave under various conditions. On the other hand, the N-tosyl α,β-unsaturated ester 14 was transformed in one step by Mg/MeOH/Et₃N to a thio-substituted indolizidinone 3. This method was also extended to a methyl-substituted diene 16, which stereoselectively provided the cis-2,6-disubstitutedproduct 17. Further synthetic transformations yielded indolizidinones 20-24, including a formal synthesis of the natural product monomorine I.     

Total synthesis of puerarin, an isoflavone C-glycoside

We completed the first total synthesis of puerarin (1), an isoflavone C-glycoside. The key intermediate, β-d-glucopyranosyl-2,6-dimethoxybenzene (9), was obtained by coupling of a lithiated aromatic reagent (3) with pyranolactone (2) in 56% yield. Condensation of (16) with p-methoxybenzaldehyde gave the chalcone (17). The protected chalcone (18) was cyclized to (19) in the presence of Tl(NO₃)₃. Demethylation of (19) was accomplished by refluxing with TMSI in CH₃CN to give puerarin (1).     

Regio- and stereoselective reactions of a rhodanine derivative with optically active 2-methyl- and 2-phenyloxirane

The reaction of a rhodanine derivative (=(Z)-5-benzylidene-3-phenyl-2-thioxo-1,3-thiazolidin-4-one; 1) with (S)-2-methyloxirane (2) in the presence of SiO₂ in dry CH₂Cl₂ for 10 days led to two diastereoisomeric spirocyclic 1,3-oxathiolanes 3 and 4 with the Me group at C(2) (Scheme 2). The analogous reaction of 1 with (R)-2-phenyloxirane (5) afforded also two diastereoisomeric spirocyclic 1,3-oxathiolanes 6 and 7 bearing the Ph group at C(3) (Scheme 3). The structures of 3, 4, 6, and 7 were confirmed by X-ray crystallography (Figs. 1 and 2). These results show that oxiranes react selectively with the thiocarbonyl group (CS) in 1. Furthermore, the nucleophilic attack of the thiocarbonyl S-atom at the SiO₂-activated oxirane ring proceeds with high regio- and stereoselectivity via an S_N2-type mechanism.     

Studies in symmetry-driven synthesis of ryanodol: application of nucleophilic alkynylation for regio- and stereoselective desymmetrization

We developed a simple and novel desymmetrization strategy toward the total synthesis of ryanodol. The advanced intermediate 1 with six contiguous tetrasubstituted carbons was synthesized from the previously reported 3 by employing two key nucleophilic reactions. The first nucleophilic reaction to C₂-symmetric tetraketone 2 installed the C6-tetrasubstituted carbon in a regio- and stereoselective fashion, leading to desymmetrized mono-alkynylated 8 without forming C₂-symmetric bis-alkynylated 9. The second addition to triketone 8 also proceeded regio- and stereoselectively to construct the C2-tetrasubstituted stereocenter of 10.     

A convergent total synthesis of antiplasmodial C2 symmetric (+)-ekeberin D4

The first concise total synthesis of C₂ symmetric (+)-ekeberin D₄ (1) that exhibits antiplasmodial activity has been achieved in total nine steps and 27% yield from the known diol 4. The efficient synthetic method features the regio- and diastereoselective epoxidation of 4 and convergent coupling between half fragments 2 and 3 by taking into account the C₂ symmetric property.     

Application of the aza-Wittig reaction to the synthesis of pyrazinothienotriazolopyrimidinones: a new tetracyclic ring system

A simple one-pot and efficient method is described for the synthesis of pyrazinothienopyrimidines 6 by domino processes involving aza-Wittig/intermolecular nucleophilic addition/intramolecular cyclization. A tandem aza-Wittig reaction of phosphazenes 7, derived from 6, with heterocumulenes (isocyanates, carbon disulfide or carbon dioxide) generates the pyrazinothienotriazolopyrimidinones 9, 11 and 12, respectively. Pyrazino[2′,3′:4,5]thieno[3,2-d]-1,2,4-triazolo[1,5-a]pyrimidin-4(3H)-ones 15 and bis(pyrazinothienotriazolopyrimidinones) 17 were synthesized by the intermolecular aza-Wittig reaction of phosphazenes 7 with acyl chlorides or α,ω-dichlorides followed by heterocyclization via imidoyl chloride intermediate 16. Further S-alkylation of 11 and reaction of 6 with phosgeniminium chloride produce 2-alkylthio- and 2-N,N-dimethylaminopyrazinothienotriazolopyrimidinones 13 and 19, respectively.     

Gold catalysis in stereoselective natural product synthesis: (+)-linalool oxide, (−)-isocyclocapitelline, and (−)-isochrysotricine

A stereoselective synthesis of the tetrahydrofuran-containing natural products (2S,5R)-(+)-linalool oxide (1), (−)-isocyclocapitelline (2), and (−)-isochrysotricine (3) is reported. Key steps are the copper-mediated S_N2′-substitution of propargyl oxiranes 7 and the gold-catalyzed cycloisomerization of dihydroxyallenes 8/17, resulting in a highly efficient center-to-axis-to-center chirality transfer. The enantioselective total synthesis of (−)-isocyclocapitelline (2) and (−)-isochrysotricine (3) allowed the elucidation of the absolute configuration of these β-carboline natural products.