CO adsorption on Cu-Pd alloy surfaces: ligand versus ensemble effects

The CO adsorption on ordered Cu-Pd alloy surfaces and surface alloys has been studied using density functional theory (DFT) within the framework of the generalized gradient approximation (GGA). On the surface alloys, the CO adsorption energy at the top sites decreases with increasing concentration of the more reactive metal Pd. This surprising ligand effect is caused by the effective compressive strain induced by the larger size of the Pd atoms. On the other hand, at the most favorable adsorption sites the CO binding becomes stronger with increasing Pd concentration which is caused by an ensemble effect related to the availability of higher coordinated adsorption sites. At the surfaces of the bulk alloys, the trends in the adsorption energy as a function of the Pd concentration are less clear because of the strong Pd-Cu interaction and the absence of effective strain effects.     

Confinement free energy of surfaces bearing end-grafted polymers in the mushroom regime and local measurement of the polymer density

End-tethered polymer chains usually adopt mushroomlike structures on the surface when their density is low. The behaviors of these surface-attached hemicoils are described by existing polymer theory. Dolan and Edwards derived the free energy of a single polymer chain confined between two planar surfaces. Their theory was used to approximate the steric interaction free energy, E, of two identical surfaces bearing polymers in the mushroom regime and to compare with experimental data obtained from surface force measurements. However, because of a mislabeled plot in the original paper, experimental force profiles did not seem to fit the free energy approximation satisfactorily. We have correctly relabeled the involved plot and derived a new simple expression for E. In order to verify this expression, we have performed experiments on PEG45 polymers incorporated in lipid bilayers using a surface force apparatus. The measured force profiles are in perfect agreement with the prediction. We show that such measurements can be used to determine the local density of grafted polymer with good precision.     

The Electrochemical Surface Forces Apparatus: The Effect of Surface Roughness, Electrostatic Surface Potentials, and Anodic Oxide Growth on Interaction Forces, and Friction between Dissimilar Surfaces in Aqueous Solutions

We present a newly designed electrochemical surface forces apparatus (EC-SFA) that allows control and measurement of surface potentials and interfacial electrochemical reactions with simultaneous measurement of normal interaction forces (with nN resolution), friction forces (with μN resolution), and distances (with ? resolution) between apposing surfaces. We describe three applications of the developed EC-SFA and discuss the wide-range of potential other applications. In particular, we describe measurements of (1) force-distance profiles between smooth and rough gold surfaces and apposing self-assembled monolayer-covered smooth mica surfaces; (2) the effective changing thickness of anodically growing oxide layers with ?-accuracy on rough and smooth surfaces; and (3) friction forces evolving at a metal-ceramic contact, all as a function of the applied electrochemical potential. Interaction forces between atomically smooth surfaces are well-described using DLVO theory and the Hogg-Healy-Fuerstenau approximation for electric double layer interactions between dissimilar surfaces, which unintuitively predicts the possibility of attractive double layer forces between dissimilar surfaces whose surface potentials have similar sign, and repulsive forces between surfaces whose surface potentials have opposite sign. Surface roughness of the gold electrodes leads to an additional exponentially repulsive force in the force-distance profiles that is qualitatively well described by an extended DLVO model that includes repulsive hydration and steric forces. Comparing the measured thickness of the anodic gold oxide layer and the charge consumed for generating this layer allowed the identification of its chemical structure as a hydrated Au(OH)(3) phase formed at the gold surface at high positive potentials. The EC-SFA allows, for the first time, one to look at complex long-term transient effects of dynamic processes (e.g., relaxation times), which are also reflected in friction forces while tuning electrochemical surface potentials.     

Analytic density-functional self-consistent-field theory of diblock copolymers near patterned surfaces

Analytical solutions are derived for the density profiles and the free energies of compressible diblock copolymer melts (or incompressible copolymer solutions) near patterned surfaces. The density-functional self-consistent-field theory is employed along with a Gaussian chain model for bonding constraints and a random mixing approximation for nonbonded interactions. An analytical solution is rendered possible by expanding the chain distribution function around an inhomogeneous reference state with a nontrivial analytical solution, by retaining the linear terms, and by requiring consistency with the homopolymer limit. The density profiles are determined by both real and complex roots of a sixth-degree polynomial that may easily be obtained by solving a generalized eigenvalue problem. This analytical formulation enables one to efficiently explore the large nine-dimensional parameter space and can serve as a first approximation to computationally intensive studies with more detailed models. Illustrative computations are provided for uniform and patterned surfaces above the order-disorder transition. The results are consistent with the previous self-consistent-field calculations in that lamellar ordering appears near the surface above the order-disorder transition and the lamella order perpendicular or parallel to the surface depending on the commensurability between the periods of the surface pattern and the density oscillations.     

铂合金纳米立方块催化剂的氧还原反应活性比较

氧还原反应是质子交换膜燃料电池和金属-空气电池的重要反应,贵金属铂（Pt）与元素周期表中第一排的非贵过渡金属（M）形成铂合金催化剂（PtM）可以提高氧还原反应活性. 但是,有关活性的提高有多大程度上是来自合金元素的贡献却仍然存在争议. 为了研究合金元素对PtM催化活性的影响,本工作合成了颗粒形状与合金元素含量相似的铂锰（PtMn）, 铂铁（PtFe）, 铂钴（PtCo）和铂镍（PtNi）纳米立方块催化剂,并考察了不同铂合金催化剂在酸性介质中的氧还原反应活性. 选择制备立方块形状纳米颗粒催化剂进行比较,可以将颗粒表面结构对催化活性的影响降到最小. 结果表明,氧还原反应活性与铂d-带中心值曲线呈现火山形关系,其中PtCo纳米立方块催化剂的活性最高. 本文所得到的实验结果与基于d-带理论框架已知表面的密度泛函理论计算结果一致.     

Interfacial colloidal sedimentation equilibrium. I. Intensity based confocal microscopy

This paper reports confocal microscopy measurements of inhomogeneous colloidal sedimentation equilibrium profiles near planar wall surfaces for conditions when colloid dimensions are comparable to the characteristic gravitational length scale. The intensity based confocal method developed in this work enables real-space measurements of one-dimensional density profiles of Brownian colloids without identifying many single colloid centers in large imaging volumes. Measured sedimentation equilibrium profiles for single-phase interfacial fluids and for coexisting inhomogeneous fluid and solid phases are in agreement with a perturbation theory and Monte Carlo simulations within the local density approximation. Monte Carlo simulated colloid scale density profiles display some minor differences with confocal images in terms of microstructural transitions involving the onset of interfacial crystallization and the precise elevation of the fluid-solid interface. These discrepancies are attributed to polydispersity unaccounted for in the analyses, sensitivity of the perturbation theory to the effective hard sphere size, and the influence of ensemble, system size, and box shape in Monte Carlo simulations involving anisotropic/inhomogeneous solids. Successful demonstration of intensity based confocal microscopy provides a basis for future measurements of three-dimensional colloidal interactions, dynamics, and structure near surfaces.     

Programmable Exposure of Pt Active Facets for Efficient Oxygen Reduction

To produce efficient ORR catalysts with low Pt content, PtNi porous films (PFs) with sufficiently exposed Pt active sites were designed by an approach combining electrochemical bottom‐up (electrodeposition) and top‐down (anodization) processes. The dynamic oxygen‐bubble template (DOBT) programmably controlled by a square‐wave potential was used to tune the catalyst morphology and expose Pt active facets in PtNi PFs. Surface‐bounded species, such as hydroxyl (OH^*, *=surface site) on the exposed PtNi PFs surfaces were adjusted by the applied anodic voltage, further affecting the dynamic oxygen (O₂) bubbles adsorption on Pt. As a result, PtNi PF with enriched Pt(111) facets (denoted as Pt_{3.5 %}Ni PF) was obtained, showing prominent ORR activity with an onset potential of 0.92 V (vs. RHE) at an ultra‐low Pt loading (0.015 mg cm^?2).     

Green functions in the theory of semiconductor surfaces

Electronic properties of a few technologically important semiconductor surfaces, explored in surface Green function calculations, are presented and briefly discussed in comparison with experimental data from high-resolution surface spectroscopy. The emphasis is on results of first-principles calculations employing the local density approximation or the generalized gradient approximation of density functional theory. The systems addressed comprise of the prototype surfaces of the elemental semiconductors diamond and Si, as well as the group IV compound semiconductor SiC. The examples show that surface Green function calculations, as performed by Maria St licka and Sydney Davison in their early work on the surfaces of model systems, such as linear monoatomic chains or the Kronig–Penney model, can nowadays be applied to efficiently evaluate electronic properties of real surfaces. The results of such ab initio Green function calculations are found to be in very good agreement with experimental data.     

Surface properties of sodium,potassium, and their binary alloys in the liquid state

The results from investigating the surface characteristics of liquid sodium, potassium, and four potassium–sodium alloys are considered. The Auger spectra and profiles of metal droplets with atomically pure surfaces in the solid and liquid state are studied under the same experimental conditions. It is shown that potassium is a surfactant with respect to sodium at the temperature of an experiment in the investigated range of volume concentrations. It is noted that the obtained values of surface tension are 15% higher than the reference values.     

Photodesorption of diatomic molecules from surfaces: A theoretical approach based on first principles

Photodesorption of small molecules from surfaces is one of the most fundamental processes in surface photochemistry. Despite its apparent simplicity, a microscopic understanding beyond a qualitative picture still poses a true challenge for theory. While the dynamics of nuclear motion can be treated on various levels of sophistication, all approaches suffer from the lack of sufficiently accurate potential energy surfaces, in particular for electronically excited states involved in the desorption scenario.In the last decade, a systematic and accurate methodology has been developed which allows a reliable calculation of accurate ground and excited state potential energy surfaces (PES) for different adsorbate–substrate systems. These potential energy surfaces serve as a prerequisite for subsequent quantum dynamical wave packet calculations, which allow for a direct simulation of experimentally observable quantities such as quantum state resolved velocity distributions.In the first part of this review, we will focus on scalar properties of desorbing diatomic molecules from insulating surfaces, where we also present a recently developed strategy of obtaining accurate potential energy surfaces using quantum chemical approaches. In general, diatomic molecules on large band gap materials such as oxide surfaces are studied which allows the use of sufficiently large cluster models and accurate ab initio methods beyond density functional theory (DFT). In the second part, we will focus on the vectorial aspects of the dynamics of nuclear motion and present simulations of experimentally accessible observables such as velocity distributions, Doppler profiles and alignment parameters. For each system, the microscopic mechanism of photodesorption is elucidated. We will demonstrate that the driving force of surface photochemistry is strongly dependent on details of the electronic structure of the adsorbate–substrate systems. This implies that great caution is advisable if experimental results are interpreted using empirical or semi-empirical models.     

Hofmeister effects in the restabilization of IgG--latex particles: testing Ruckenstein's theory

The hydration interaction is responsible for the colloidal stability observed in protein-coated particles at high ionic strengths. The origin of this non-DLVO interaction is related not only to the local structure of the water molecules located at the surface but also to the structure of those molecules involved in the hydration of the ions that surround the colloidal particles. Ruckenstein and co-workers have recently developed a new theory based on the coupling of double-layer and hydration interactions. Its validity was contrasted by their fitting of experimental data obtained with IgG-latex particles restabilized at high salt concentration. The theory details the important role played by the counterions in the stability at high salt concentrations by proposing an ion pair reaction forming surface dipoles. These surface dipoles are responsible of repulsive interactions between two approaching surfaces. This paper checks the theory with recent data where some ions associated with the Hofmeister series (NO(3)(-), SCN(-) and Ca(2+)) restabilize the same kind of IgG-latex systems by means of hydration forces. Surprisingly, these ions induce stability acting even as co-ions, likely by modifying the water structure at the surface, but not forming surface ion pairs. Therefore, this experimental evidence would question Ruckenstein's theory based on the surface dipole formation for explaining the observed restabilization phenomena.     

Toward CH4 dissociation and C diffusion during Ni/Fe-catalyzed carbon nanofiber growth: a density functional theory study

First-principles calculations have been performed to investigate CH(4) dissociation and C diffusion during the Ni∕Fe-catalyzed growth of carbon nanofibers (CNFs). Two bulk models with different Ni to Fe molar ratios (1:1 and 2:1) are constructed, and x-ray diffraction (XRD) simulations are conducted to evaluate their reliability. With the comparison between the calculated and experimental XRD patterns, these models are found to be well suited to reproduce the crystalline structures of Ni∕Fe bulk alloys. The calculations indicate the binding of the C(1) derivatives to the Ni∕Fe closest-packed surfaces is strengthened compared to that on Ni(111), arising from the upshift of the weighted d-band centers of catalyst surfaces. Then, the transition states for the four successive dehydrogenation steps in CH(4) dissociation are located using the dimer method. It is found that the energy barriers for the first three steps are rather close on the alloyed Ni∕Fe and Ni surfaces, while the activation energy for CH dissociation is substantially lowered with the introduction of Fe. The dissolution of the generated C from the surface into the bulk of the Ni∕Fe alloys is thermodynamically favorable, and the diffusion of C through catalyst particles is hindered by the Fe component. With the combination of density functional theory calculations and kinetic analysis, the C concentration in catalyst particles is predicted to increase with the Fe content. Meanwhile, other experimental conditions, such as the composition of carbon-containing gases, feedstock partial pressure, and reaction temperature, are also found to play a key role in determining the C concentration in bulk metal, and hence the microstructures of generated CNFs.     

Tip–surface interactions in noncontact atomic force microscopy on reactive surfaces

The imaging process in noncontact atomic force microscopy (AFM) is studied on a number of reactive surfaces, namely, the Takayanagi reconstructed Si(111), InP(110), and GaAs(110). We show that on these surfaces, the short-range dangling-bond type of interaction between the tip and the surface is decisive in achieving atomic resolution. The short-range tip–surface interaction is modeled in the density functional theory within the GGA approximation. We show that we can achieve quantitative agreement with the experimental data in the commonly used frequency modulation technique for AFM surface corrugation with a very simple model for the tip geometry treating the tip–surface interaction in the perturbation theory. The nature of the short-range tip–surface interaction on the three surfaces is considered and the consequences thereof for the experiments is discussed.