Zinc Undecylenate Catalyst for the Ring‐Opening Polymerization of Caprolactone Monomers

The ring‐opening polymerization of two caprolactone monomers catalyzed by zinc undecylenate (ZU) is reported. Polymerizations were performed in bulk with benzyl alcohol (BnOH) as an initiator at 90 and 110 °C, respectively. A slower polymerization rate was observed for γ‐octyloxy‐ϵ‐caprolactone as compared to ϵ‐caprolactone. Diblock copolymers were synthesized by the sequential monomer addition at 90 and 110 °C. The kinetic studies performed for the ring‐opening polymerization of ϵ‐caprolactone and γ‐octyloxy‐ϵ‐caprolactone and the successful synthesis of diblock copolymers by the sequential monomer addition confirmed the controlled/living nature of zinc undecylenate catalyzed reactions.     

Free‐radical polymerization of dioxolane and dioxane derivatives: Effect of fluorine substituents on the ring opening polymerization

Partially fluorinated and perfluorinated dioxolane and dioxane derivatives have been prepared to investigate the effect of fluorine substituents on their free‐radical polymerization products. The partially fluorinated monomer 2‐difluoromethylene‐1,3‐dioxolane (I) was readily polymerized with free‐radical initiators azobisisobutyronitrile or tri(n‐butyl)borane–air and yielded a vinyl addition product. However, the hydrocarbon analogue, 2‐methylene‐1,3‐dioxolane (II), produced as much as 50% ring opening product at 60 °C by free‐radical polymerization. 2‐Difluoromethylene‐4‐methyl‐1,3‐dioxolane (III) was synthesized and its free‐radical polymerization yielded ring opening products: 28% at 60 °C, decreasing to 7 and 4% at 0 °C and −78 °C, respectively. All the fluorine‐substituted, perfluoro‐2‐methylene‐4‐methyl‐1,3‐dioxolane (IV) produced only a vinyl addition product with perfluorobenzoylperoxide as an initiator. The six‐membered ring monomer, 2‐methylene‐1,3‐dioxane (V), caused more than 50% ring opening during free‐radical polymerization. However, the partially fluorinated analogue, 2‐difluoromethylene‐1,3‐dioxane (VI), produced only 22% ring opening product with free‐radical polymerization and the perfluorinated compound, perfluoro‐2‐methylene‐1,3‐dioxane (VII), yielded only the vinyl addition polymer. The ring opening reaction and the vinyl addition steps during the free‐radical polymerization of these monomers are competitive reactions. We discuss the reaction mechanism of the ring opening and vinyl addition polymerizations of these partially fluorinated and perfluorinated dioxolane and dioxane derivatives. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5180–5188, 2004     

Neo‐Fused Hexaphyrin: A Molecular Puzzle Containing an N‐Linked Pentaphyrin

The first neo‐confused hexaphyrin(1.1.1.1.1.0) was synthesized by oxidative ring closure of a hexapyrrane bearing two terminal “confused” pyrroles. The new compound displays a folded conformation with a short interpyrrolic C???N distance of 3.102 Å, and thus it readily underwent ring fusion to afford a neo‐fused hexaphyrin with an unprecedented 5,5,5,7‐tetracyclic ring structure. Furthermore, coordination of Cu^II triggered a ring opening/contracting reaction to afford a Cu^II complex of an N‐linked pentaphyrin derivative. The roles of reactive N? C bonds in the porphyrinoid macrocycles were demonstrated.     

Development of hydrogenated ring‐opening metathesis polymers

New hydrogenated ring‐opening metathesis polymers with excellent thermal and optical properties were developed. These polymers were prepared by the ring‐opening metathesis polymerization of ester‐substituted tetracyclododecene monomers followed by the hydrogenation of the main‐chain double bond. The degree of hydrogenation was an important factor for the thermal stability of the polymers, and as complete hydrogenation as possible was necessary to obtain a thermally stable polymer. The completely hydrogenated ring‐opening polymer derived from 8‐methyl‐8‐methoxycarbonyl‐substituted monomer has a glass‐transition temperature of 171 °C and a 5% weight‐loss temperature of 446 °C. This polymer has excellent thermal and optical properties because of its bulky and unsymmetrical polycyclic structure in the main chain and is an alternative to glass or other transparent polymers such as poly(methyl methacrylate) and polycarbonate resin. This polymer has also been used in a wide variety of applications, such as optical lenses, optical disks, optical films, and optical fiber. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4661–4668, 2000     

The use of Cu and Zn salicylaldimine complexes as catalyst precursors in ring opening polymerization of lactides: ligand effects on polymer characteristics

A range of monomeric tetra‐coordinate copper (II) and zinc (II) complexes based on N,O‐bidentate salicylaldimine Schiff base ligands has been synthesized and characterized using various spectroscopic techniques. These complexes were then evaluated as initiators in ring‐opening polymerization of lactides at both 70 °C and 110 °C. The effect of structural changes in the complexes on the ability of these compounds to initiate lactide polymerization as well as the impact on the chemical and physical characteristics of the polymers obtained indicate that the coordination geometry of the metal complex, M? O bond length and substituents on the Schiff base ligand all play a role in the catalyst activity. Electronic factors were dominant in the case of the copper complexes while steric factors prevailed in the case of Zn initiators. Both the Zn and Cu complexes exhibit characteristics of living ring opening polymerization. Copyright © 2010 John Wiley & Sons, Ltd.     

Promoting effect of thiophenols on the ring‐opening polymerization of 1,3‐benzoxazine

Thiophenol and p‐nitrothiophenol were evaluated as promoters for the ring opening polymerization of benzoxazine. The ring‐opening polymerization of p‐cresol type monofunctional N‐phenyl benzoxazine 1a with 10 mol % of thiophenols proceeded at 150 °C, leading to the high conversion of 1a more than 95% within 5 h, whereas the polymerization of 1a without thiophenols did not proceed under the same conditions. The promotion effect of the thiophenols on curing of bisphenol‐A type N‐phenyl benzoxazine 1b was also investigated. In the differential scanning calorimetric (DSC) analysis of the polymerization of 1b at 150 °C without using any promoters, an exothermic peak attributable to the ring‐opening reaction of benzoxazine was observed after 8 h. In contrast, in the DSC analysis of the polymerization of 1b with addition 20 mol % of p‐nitrothiophenol, an exothermic peak was observed within 2 h, to clarify the significant promoting effect of p‐nitrothiophenol. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2523–2527     

The preparation and characterization of novel cocylic(arylene disulfide) oligomers

A series of homo‐ and cocyclic(arylene disulfide) oligomers were synthesized under high dilution conditions by the catalytic oxidation of arylenedithiols with oxygen in the presence of a copper‐amine catalyst in DMAc. The aryl groups contained moieties such as sulfone, ether, and ketone. The free radical ring‐opening polymerization of these cyclic(arylene disulfide) oligomers led to the formation of linear poly(thio arylene)s. The homo‐ and cocyclic(arylene disulfide) oligomers were characterized by gradient high pressure liquid chromatography (HPLC), get permeation chromatography (GPC), ¹H‐NMR, and differential scanning calorimetry (DSC) methods. These cocyclic(arylene disulfide) oligomers except those containing sulfone moiety had lower melt flow temperature as low as 140 °C and therefore could readily undergo free radical ring‐opening polymerization under mild conditions. The glass transition temperatures of these cocyclics ranged from 72.3 to 190.0 °C, while the glass transition temperatures of the polydisulfides derived from these cocyclics ranged from 78.4 to 194.5 °C. In this article, a new method of preparing arylene dithiols 4,4′‐oxybis(benzenethiol) and diphenylmethane‐4,4′‐dithiol is reported. Copyright © 2003 John Wiley & Sons, Ltd.     

Solid‐phase thermal polymerization of macrocyclic ethylene terephthalate dimer using various transesterification catalysts

Thermal ring‐opening polymerization of a uniform macrocyclic ethylene terephthalate dimer with and without catalyst was investigated for the first time. Although polymerization progressed without a catalyst, the reaction was extremely slow and all the products were colored. Various transesterification catalysts were tested for their activity toward this ring‐opening polymerization. Among the various catalysts, 1,3‐dichloro‐1,1,3,3‐tetrabutyldistannoxane exhibited the highest catalytic activity, and a colorless polymer with a weight‐average molecular weight of 36,100 was obtained in 100% yield by heating for 3 min at 200 °C. It is noteworthy that our method does not need a vacuum because no side products are formed during the process. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3360–3368, 2000     

Synthesis of periodic copolymers via ring‐opening copolymerizations of cyclic anhydrides with tetrahydrofuran using nonafluorobutanesulfonimide as an organic catalyst and subsequent transformation to aliphatic polyesters

To synthesize polyesters and periodic copolymers catalyzed by nonafluorobutanesulfonimide (Nf₂NH), we performed ring‐opening copolymerizations of cyclic anhydrides with tetrahydrofuran (THF) at 50–120 °C. At high temperature (100–120 °C), the cyclic anhydrides, such as succinic anhydride (SAn), glutaric anhydride (GAn), phthalic anhydride (PAn), maleic anhydride (MAn), and citraconic anhydride (CAn), copolymerized with THF via ring‐opening to produce polyesters (M_n = 0.8–6.8 × 10³, M_n/M_w = 2.03–3.51). Ether units were temporarily formed during this copolymerization and subsequently, the ether units were transformed into esters by chain transfer reaction, thus giving the corresponding polyester. On the other hand, at low temperature (25–50 °C), ring‐opening copolymerizations of the cyclic anhydrides with THF produced poly(ester‐ether) (M_n = 3.4–12.1 × 10³, M_w/M_n = 1.44–2.10). NMR and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra revealed that when toluene (4 M) was used as a solvent, GAn reacted with THF (unit ratio: 1:2) to produce periodic copolymers (M_n = 5.9 × 10³, M_w/M_n = 2.10). We have also performed model reactions to delineate the mechanism by which periodic copolymers containing both ester and ether units were transformed into polyesters by raising the reaction temperature to 120 °C. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cyclic polylactides via simultaneous ring‐opening polymerization and polycondensation catalyzed by dibutyltin mercaptides

l ‐Lactide is polymerized in bulk at 160 °C either with dibutyltin bis(benzylmercaptide) (SnSBzl), dibutyltin bis(benzothiazole 2‐mercaptide) (SnMBT), or with dibutyltin bis(pentafluorothiophenolate) (SnSPF) as catalysts. SnSBzl yields linear polylactides having benzylthio‐ester end groups in addition to cyclic polylactides, whereas SnMBT and SnSPF mainly or exclusively yield cyclic polylactides. This finding, together with model reactions, indicates that the SnS catalysts promote a combined ring‐opening polymerization and polycondensation process including end‐to‐end cyclization. SnMBT caused slight racemization (3%–5%), when used at 160 °C. With SnSPF optically pure cyclic poly(l ‐lactide)s with high‐molecular weights can be prepared at 160 °C. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3767–3775     

Ring‐opening polymerization of 1,3‐benzoxazines by p‐toluenesulfonates as thermally latent initiators

p‐Toluenesulfonic acid (TsOH) and several alkyl p‐toluenesulfonates, that is, methyl p‐toluenesulfonate (TsOMe), cyclohexyl p‐toluenesulfonate (TsOCH), and neopentyl p‐toluenesulfonate (TsONP), were evaluated as initiators for the ring‐opening polymerization of benzoxazines. TsOH and TsOMe were highly efficient initiators that induced the polymerization at 60 and 80 °C, respectively. In contrast, TsOCH and TsONP did not initiate the polymerization below 100 °C, while they induced the polymerization at elevated temperatures, 120 and 150 °C, respectively. When TsOCH was used as an initiator, the corresponding polymerization rate was comparable to that observed for the polymerization with using TsOH as an initiator. These results suggested that neutral TsOCH and TsONP can be regarded as “thermally latent initiators,” which underwent the thermal dissociation at the elevated temperatures to generate the corresponding alkyl cations and/or TsOH as the initiators of the polymerization. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Solid-state thermal polymerization of the heterocyclic HC7N7 acid

The preparation of a new type of thermally stable (up to 385°C) heterocyclic polymer, containing a five-membered fused ring system, is described. The ultraviolet, visible, and infrared spectra indicate that this solid-state polymerization probably proceeds via formation of an azomethine-type intermolecular crosslink, rather than via opening of the C₄N₄ ring system. The reaction is facilitated by the presence of reactive protons, which act as an efficient catalyst for this nucleophilic addition to the nitrile group. It is suggested that this type of solid-state polymerization may possibly be carried out on a single HC₇N₇ crystal resulting in a fully ordered macroscopic polymer single crystal.     

Allyl ethers as combined plasticizing and crosslinkable side groups in polycarbonate‐based polymer electrolytes for solid‐state Li batteries

Allyl ether‐functional polycarbonates, synthesized by organocatalytic ring‐opening polymerization of the six‐membered cyclic carbonate monomer 2‐allyloxymethyl‐2‐ethyltrimethylene carbonate, were used to prepare non‐polyether polymer electrolytes. UV‐crosslinking of the allyl side groups provided mechanically stable electrolytes with improved molecular flexibility—T_g below ?20 °C—and higher ionic conductivity—up to 4.3 × 10^?7 S/cm at 25 °C and 5.2 × 10^?6 S/cm at 60 °C—due to the plasticizing properties of the allyl ether side groups. The electrolyte function was additionally demonstrated in thin‐film Li battery cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2128–2135     

Thermolysis and [3+2]‐Cycloaddition Reactions of 2,3‐Diferrocenyl‐ and 2,3,‐Diruthenocenylcyclopropenones

Abstract

2,3‐Diferrocenyl‐ and 2,3‐diruthenocenylcyclopropenone undergo thermolysis at ～180°C with opening of the small ring via ketenocarbenes. Intramolecular transformation of the latter occurs with elimination of CO to yield dimetallocenylacetylenes. Alternatively, they enter into 1,3‐dipolar cycloaddition reactions with C≡C or C?C multiple bonds to give cyclopentadienone or cyclopentenone derivatives, respectively.     

Poly(lactic acid) brushes grow longer at lower temperatures

Poly(lactic acid) (PLA) brushes prepared by the ring opening of lactide were thicker when polymerized at a lower temperature (25 °C) than was typically used for polymerization in solution. The molecular weight of solution polymerized lactide was also higher when lactide was polymerized at 25 °C compared with polymerization at higher temperatures. However, the yield of PLA was low at this temperature. These results highlight the different requirements for solution polymerization and brush growth. In the former case, both percentage of conversion and molecular weight are important considerations. In the latter case, however, percentage of conversion is unimportant as a brush represents a very small amount of polymer. It was also shown during the course of these studies that the native hydroxy groups on silicon substrates and silanols in solution were equally good initiators when compared with hydroxy terminated self‐assembled monolayers on gold and alcohols, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3362–3367, 2010     

Disperse red 1 end capped oligoesters. Synthesis by noncatalyzed ring opening oligomerization and structural characterization

The synthesis of novel azofunctional oligoesters through bulk ring opening of ε‐caprolactone and D ,L ‐lactide (LA) at 100 and 130 °C, respectively, mediated by N‐ethyl‐N‐(2‐hydroxyethyl)‐4‐(4‐nitrophenylazo)aniline (Disperse Red 1) (DR1) is described. The synthetic procedure allows “clean” products because no catalysts were used in the reaction. Moreover, DR1 moiety is showed for the first time to promote the ring opening of cyclic esters. The molecular structure of the obtained oligoesters was established by NMR spectroscopy, MALDI ToF MS and electrospray ionization mass spectrometry (ESI MS). ESI‐MS/MS fragmentation experiments were used to demonstrate the nature of the chain end groups (hydroxyl and DR1). Intermolecular transesterification reactions were proved by mass spectrometry studies at least in the case of LA oligomerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 534–547, 2009     

Ring‐opening polymerization of lactones using binaphthyl‐diyl hydrogen phosphate as organocatalyst and resulting monosaccharide functionalization of polylactones

Binaphthyl‐diyl hydrogen phosphate has been assessed for the first time as a catalyst for the ring‐opening polymerization of ε‐caprolactone (CL) and δ‐valerolactone (VL). In the presence of benzyl alcohol as coinitiator at 40–60 °C, the polymerization is quantitative and controlled both in terms of dispersity and of number‐average molecular weight corresponding to the monomer/initiator ratio. The use of a selectively protected D ‐glucose derivative bearing the primary C6 hydroxyl group as initiator leads to the quantitative end‐functionalization of the polyesters in rather short reaction times (ca. 10 min at 60 °C for δ‐VL) with dispersities around 1.08–1.10. Methyl‐α‐D ‐glucopyranoside has been used as a carbohydrate polyol initiator in bulk. The initiation efficiency is partial, leading to hydrophilic carbohydrates functionalized polylactones in a one‐step procedure. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Ring‐opening polymerization of ϵ‐caprolactam and ϵ‐caprolactone via microwave irradiation

A novel process for synthesizing nylon‐6 and poly(?‐caprolactone) by microwave irradiation of the respective monomers, ?‐caprolactam and ?‐caprolactone, is described. The ring opening of ?‐caprolactam to produce nylon‐6 was performed in a microwave oven by the forward power being controlled to about 90–135 W in the presence of an ω‐aminocaproic acid catalyst (10 mol %) and for periods of 1–3 h at temperatures varying from 250 to 280 °C. The ring opening of ?‐caprolactone to produce poly(?‐caprolactone) was performed in a microwave oven by the forward power being controlled to about 70–100 W for a period of 2 h in the presence of stannous octoate with and without 1,4‐butanediol over a temperature range of 150–200 °C. The yields, conditions of the reactions, and properties of the products generated relative to the thermal processes are discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2264–2275, 2002     

Synthesis and radical ring‐opening polymerization of vinylcyclopropanes derived from amino acids with hydrophobic moieties

Six 1,1‐disubstituted vinylcyclopropanes (VCP) were synthesized from glycine and amino acids bearing hydrophobic moieties, l ‐alanine, l ‐valine, l ‐leucine, l ‐isoleucine, and l ‐phenylalanine. These VCP derivatives efficiently underwent radical ring‐opening polymerization to afford the corresponding polymers bearing trans‐vinylene moiety in the main chains and the amino acid‐derived chiral moieties in the side chains. The polymers were film‐formable, and in the films of polymers bearing the glycine‐ and alanine‐derived side chains, presence of hydrogen bonding was confirmed by IR analysis. Thermogravimetric analysis of the polymers revealed that the temperatures of 5% weight loss were higher than 300 °C. Differential scanning calorimetry clarified that the polymers were amorphous ones showing glass transition temperatures in a range of 48–80 °C. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3996–4002     

Cascade dimerization of 2-styryl-1,1-cyclopropanedicarboxylate upon treatment with gallium trichloride

2-Styrylcyclopropane-1,1-dicarboxylate treated with anhydrous gallium trichloride undergoes dimerization with the cyclopropane ring opening and the styryl substituent double bond involvement, leading to the formation of polysubstituted cyclic and bicyclic structures with the predominance of the former or the latter depending on the reaction conditions. Most compounds are formed with very high diastereoselectivity. Thirteen major and minor dimeric structures were isolated and reliably characterized, two of which were found to additionally include a chlorine atom. A rare for the reactions of donor-acceptor cyclopropanes example of the formation of a product with the fused cyclobutane ring was effected at–80 °C. Plausible mechanisms of observed processes were discussed.