Refractive index modulation in polymeric photochromic films

Photochromic properties of methylacrylate monomers and polymers containing azobenzene groups with heterocyclic sulfonamide functionalities viz sulfisomidyne (4-amino-N-[2,6-dimethylpyrimidyn-4-yl]benzenesulfonamide) and sulfamethoxazole (4-amino-N-[5-methylisoxazol-3-yl]benzenesulfonamide) substituents were investigated. On illumination with light the azobenzene group underwent trans-cis isomerisation, which was manifested by a drop in the absorbance of the maximum absorption peak at ca. 450 nm and by decrease in refractive index. Quantum chemical calculations showed significant differences in UV-VIS spectra, dipole moments, polarizability and refractive index between both cis and trans form of the chromophoric monomers. The illumination of spin-coated polymer films during ellipsometry measurements resulted in a change in refractive index within the range of 0.014 to 0.025. The dynamics of growth and decay of refractive index changes, was described by biexponential functions approach.     

Methylacrylate polymers with photochromic side chains containing heterocyclic sulfonamide substituted azobenzene

Methylacrylate monomers containing azobenzene groups with heterocyclic sulfonamide: sulfisomidyne (4-amino-N-[2,6-dimethylpyrimidyn-4-yl]benzenesulfonamide) and sulfamethoxazole (4-amino-N-[5-methylisoxazol-3-yl]benzenesulfonamide) substituents were synthesized. The monomers were used for preparation of homopolymers and copolymers with butyl 2-methylacrylate and 2-ethylhexyl acrylate. The materials obtained showed photochromic properties manifested by trans-cis isomerization of the side chain azobenzene fragments induced by illumination with unpolarized and polarized light. The decrease of the absorbance of the E(trans) form at ≈450 nm was observed and the materials tested were in form of thin films deposited onto glass.The isomerization of the polymers carried out during ellipsometric measurements showed the reversibility of the process in repeated illumination cycles with green laser light. The change of refractive index caused by illumination was in the range ≈0.005-0.008 as determined by ellipsometry.     

Properties of optically addressed liquid crystal spatial light modulators studied by mach-zehnder interferometry

In this work optically addressed liquid crystal spatial light modulators are experimentally investigated. Local reorientation of molecules in the modulator and local changes of effective refractive index n_eff (x,y) are induced by modulated light intensity I (x,y). We present preliminary results of measurements of phase shifts in optically addressed liquid crystal panels using a Mach-Zehnder interferometer. Experiments were performed for the panels filled with nematic and dye-doped nematic liquid crystals. Optical addressing was realized by Ar+ laser beam (λ = 514.5 nm) while the reading beam was supplied by He-Ne laser (632.8 nm). The operation voltage was in the range 4 - 20 V. The total phase shift under the influence of addressing light for the studied systems was 2 - 6 pagr;, sensitivity to the addressing light ∼ μW/cm² per 2π phase change and speed of response to the light was 20 ms - 30 s with total recovery time 0.5 - 120 s.     

Synthesis and Biological Activity of Compounds Obtained by Reacting Methyl Aroylpyruvates with Sulfadimidine

The reaction of methyl aroylpyruvates and 2-(4-aminobenzenesulfamido)-4,6-dimethylpyrimidine in glacial acetic acid in the presence of anhydrous sodium acetate afforded (2Z)-4-aryl-2-hydroxy-N-{4-[(4,6-dimethylpyrimidin-2-yl)sulfamoyl]phenyl}-4-oxobut-2-enamides. Reaction of the above reagents in a mixture of acetic acid and ethanol (1: 1) in the absence of anhydrous sodium acetate gave methyl (2Z)-4-aryl-2-{4-[(4,6-dimethylpyrimidin-2-yl)sulfamoyl]phenylamino}-4-oxobut-2-enoates. Analgesic and anti-inflammatory activities of the synthesized compounds was studied.     

Swellable molecularly imprinted polyN-(N-propyl)acrylamide particles for detection of emerging organic contaminants using surface plasmon resonance spectroscopy

Lightly crosslinked theophylline imprinted polyN-(N-propyl)acrylamide particles (ca. 300 nm in diameter) that are designed to swell and shrink as a function of analyte concentration in aqueous media were spin coated onto a gold surface. The nanospheres responded selectively to the targeted analyte due to molecular imprinting. Chemical sensing was based on changes in the refractive index of the imprinted particles that accompanied swelling due to binding of the targeted analyte, which was detected using surface plasmon resonance (SPR) spectroscopy. Because swelling leads to an increase in the percentage of water in the polymer, the refractive index of the polymer nanospheres decreased as the particles swelled. In the presence of aqueous theophylline at concentrations as low as 10⁻⁶ M, particle swelling is both pronounced and readily detectable. The full scale response of the imprinted particles to template occurs in less than 10 min. Swelling is also reversible and independent of the ionic strength of the solution in contact with the polymer. Replicate precision is less than 10⁻⁴ RI units. By comparison, there is no response to caffeine which is similar in structure to theophylline at concentrations as high as 1 × 10⁻² M. Changes in the refractive index of the imprinted polymer particles, as low as 10⁻⁴ RI units could be readily detected. A unique aspect of the prepared particles is the use of light crosslinking rather than heavy crosslinking. This is a significant development as it indicates that heavy crosslinking is not entirely necessary for selectivity in molecular imprinting with polyacrylamides.     

Reactions of <Emphasis Type="Italic">N</Emphasis>-and <Emphasis Type="Italic">C</Emphasis>-Alkenylanilines: VII. Synthesis of Indole Heterocycles from Products of Reaction between <Emphasis Type="Italic">N</Emphasis>-Mesyl-2-(1-alken-1-yl)anilines and Halogens

N-Mesyl-2-(1-methyl-1-butenyl)-6-methylaniline reacted with Br₂ to afford N-mesyl-2-(3-bromo-1-penten-2-yl)aniline that under treatment with NH₃ or amines underwent cyclization into N-mesyl-7-methyl-3-methylene-2-ethylindoline. The reaction of N-mesyl-2-(1-methyl-1-buten-1-yl)-4-methyl- and 2-(1-methyl-1-buten-1-yl)aniline with Br₂ gave rise to the corresponding N-mesyl-2-(2-bromo-1-methyl-1-buten-1-yl)anilines. Under the similar conditions N-tosyl-2-(1-cyclohexen-1-yl)aniline was converted into N-tosyl-2-(6-bromo-1-cyclohexen-1-yl)aniline that under treatment with NH₃ furnished N-tosyl-1,2,3,9a-tetrahydrocarbazole. The reaction of N-mesyl-1,2,3,9a-tetrahydrocarbazole with CuBr₂ in MeOH afforded N-mesyl-4-methoxy-1,2,3,4-tetrahydrocarbazole. N-Mesyl-6-methyl-2-(1-cyclopenten-1-yl)aniline in reaction with Br₂ in the presence of NaHCO₃ was oxidized into the corresponding cyclopentenone, and with NBS it gave N-mesyl-2-(2-bromo-1-cyclopenten-1-yl)aniline.__________Translated from Zhurnal Organicheskoi Khimii, Vol. 41, No. 5, 2005, pp. 730–737.Original Russian Text Copyright © 2005 by Gataullin, Sotnikov, Spirikhin, Abdrakhmanov.     

Functionally integrated liquid crystalline photochromic triple block copolymer with locally light‐ and thermal‐controllable sub‐blocks

Photoorientation and reorientation processes induced by illumination of the samples with oppositely directed polarized light and by the thermal treatment were studied for the films of triblock copolymer pAzo₁₀‐b‐pPhM₈₀‐b‐pAzo₁₀ consisting of a nematic phenyl benzoate сentral sub‐block (PhM, DP = 80) with two terminal smectic azobenzene sub‐blocks (Azo, DP = 10). For amorphized films of triblock copolymer, illumination with polarized light (λ = 546 nm) is shown to be by orientation of only Azo‐containing groups, but upon following annealing of the film, PhM groups are adjusted to the orientation of Azo fragments. It was found, that the subsequent illumination of the block copolymer sample with oppositely directed polarized light changes the orientation of azobenzene groups, while the orientation of phenyl benzoate groups is remained unchanged. Thus, the cyclic illumination of the triblock copolymer samples by the linear polarized light and subsequent thermal treatment make it possible to control and fix orientation of azobenzene and phenyl benzoate groups located in different sub‐blocks in the desired and independent manner. The comparison of these results with the data on random p(Azo₇‐ran‐PhM₃₀) copolymer of the similar composition revealed, that in the random copolymer, both Azo and PhM mesogenic groups are involved in the orientational cooperative process regardless of films process treatment. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1602–1611     

两种新型双极有机小分子发光材料的合成与发光

设计和合成了两种新的具有“双极(bipolar)”性质和发光性能的有机小分子化合物N-[4-(5-(2-苯基喹啉-4)-1,3,4-噁二唑-2)苯基]-N'-苯基-N,N'-二苯基-1,1'-联苯基-4,4'-二胺(TPDOPQ)和N,N'-双{4-[5-(2-苯基喹啉-4-基)-1,3,4-噁二唑-2]苯基}-N,N'-二苯基-1,1'-联苯基-4,4'-二胺[TPD(OPQ)₂]. 用¹H NMR, MS和元素分析进行了表征, 研究了化合物的热稳定性和光致发光性质, 并用循环伏安法测定了其电化学性能. 结果表明, 这两种合成的有机化合物同时具备空穴传导和电子输入双重功能, 光致发光性能优良, 热稳定性好, 能形成均衡薄膜, 因此可作为制作有机电致发光器件的候选材料.     

A Comparison of Functional Bladder Damage after Intravesical Photodynamic Therapy with Three Different Photosensitizers

Abstract— The influence of type of photosensitizer, drug and light dose, and time interval between photosensitizer and illumination on the extent of photodynamic therapy (PDT)-induced bladder damage and recovery was investigated using a mouse model. The three photosensitizers studied were Photofrin, meso-tetrahydroxyphenylchlorin (m-THPC) and bacteriochlorin a (BCA). Functional bladder damage was quantitatively assessed from increases in urination frequency index (FI) at 1-35 weeks after illumination and histological damage was qualitatively assessed at 1 day, 1, 2 and 12 weeks. Photofrin-mediated PDT caused an acute increase in FI at 1 week, with recovery within 2-8 weeks after light doses of 2.7-8.2 J/cm². After higher light doses there was only partial recovery. Previous results indicated that the acute response and rate of recovery was the same whether Photofrin was given at 1 day or up to 7 days before illumination. The m-THPC-mediated PDT at drug doses of 0.3 mg/kg also resulted in a marked acute response with good recovery, even after 10.8 J/cm². Lower drug doses in combination with 5.4 J/cm² did not result in acute or late damage. There was no significant difference in acute response when m-THPC was given 1, 3 or 7 days before illumination, although recovery was faster for the longer illumination intervals (3 or 7 days). Illumination at 1 h after 20 mg/kg BCA induced an acute response within 2 days after illumination, with recovery within 4-8 weeks. Lower drug doses did not result in damage. The most prominent histological changes during the acute period with all three photosensitizers were submucosal edema and vessel dilation, with epithelial denudation (depending on drug/light dose). We conclude that BCA and m-THPC are both potent new photosensitizers. They can induce a moderate to severe acute bladder response with complete healing over a period of a few weeks. The photosensitizer m-THPC is very effective with low doses of photosensitizer and light, whereas relatively high doses of BCA and light are required to obtain equivalent functional bladder damage in our mouse model.     

Synthesis of isonipecotinoyl analogues of aminopterin and folic acid

The preparation of isonipecotinoyl analogues of aminopterin and methotrexate is described. Condensation of diethyl N-isonipecotinoyl-L-glutamate 4 with 2-amino-5-bromomethyl-3-cyanopyrazine 5 afforded diethyl N-(N-[(2-amino-3-cyanopyrazin-5-yl)methyl]isonipecotinoyl)-L-glutamate 6 . Cyclisation of 6 with guanidine followed by blocking group hydrolysis afforded N-([N-(2,4-diaminopteridin-6-yl)methyl]isonipecotinoyl)-L-glutamic acid 8 . Coupling of N-(2-amino-4(3H)ioxopteridin-6-yl]methyl)isonipecotinic acid 11 with diethyl L-glutamate gave diethyl N-[(N-[2-amino-4(3H)-oxopteridin-6-yl]methyl)isonipecotinoyl]-L-glutamate 12 . Blocking group hydrolysis afforded N-[(N-[2-amino-4(3H)-oxopteridin-6-yl]methyl)isonipecotinoyl]-L-glutamic acid 13 .     

Phototriggered atmospheric degradation of poly[methyl(phenyl)silanediyl] in the presence of ultraviolet absorbers

Oxidative changes in poly[methyl(phenyl)silanediyl] (PMPSi) films exposed in a Weather-O-Meter ATLAS Ci 3000+ were monitored by Fourier transform infrared spectroscopy. Increases in absorption in the siloxane, carbonyl, and hydroxyl regions, decreases in absorption in the Si Si region, and changes in the aromatic C H bond region were monitored. Experiments in argon and air indicated the key role of oxygen in the process. The photooxidation of PMPSi was retarded by triazine- and oxalanilide-based ultraviolet absorbers [2-(4,6-diphenyl-1,3,5-triazin-2-yl)-5-(hexyloxy)phenol and N-(4-tert-butyl-2-ethoxyphenyl)-N′-(2-ethylphenyl)oxalanilide] protecting the polymer by the excited-state intramolecular proton-transfer mechanism. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 714–721, 2004     

Quantum chemical study of the transformation of 2-(N-alkylamino)-3-(indol-1-yl)-and 2-(N-alkylamino)-3-(indol-3-yl)maleimides by protic acids: Tandem hydride transfer/cyclization mechanism

The geometric parameters, the charge distribution, and the energetics of N-methyl-2-(N-ethylanilino)-3-(indol-1-yl)-and N-methyl-2-(N-ethylanilino)-3-(indol-3-yl)maleimides and their conjugated acids were studied by density functional theory calculations at the B3LYP/6-31G(d) level. The mechanism of the tandem hydride transfer/cyclization sequence, which occurs after protonation of N-methyl-2-(N-ethylanilino)-3-(indol-1-yl)-and N-methyl-2-(N-ethylanilino)-3-(indol-3-yl)maleimides, was analyzed. The investigation of the potential energy surface for the tandem hydride transfer/cyclization of the iminium cation that formed upon protonation revealed that the hydride transfer followed by intramolecular cyclization at position 7 of the indole fragment in N-methyl-2-(N-ethylanilino)-3-(indol-1-yl)maleimide is the preferable process, unlike alternative intramolecular cyclization involving the cationic center at the C(2) atom of the indole fragment and the benzene ring of the N-ethylaniline fragment of the indoleninium cation in N-methyl-2-(N-ethylanilino)-3-(indol-3-yl)maleimide. A study of the key intermediates of the assumed reaction mechanism demonstrated that these intermediates are actually stationary points on the potential energy surface (minima and transition states). Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2069–2073, December, 2006.     

Optically induced birefringence in dye-doped blue phase liquid crystals

This paper investigates the photoinduced change of refractive index in dye (methyl red, MR)-doped blue phase (DDBP) cells by illumination of a pump beam. Through excitation of light irradiation with proper photon energy, MR can transform from trans-state to cis-state and successively diffuse and anisotropically adsorb on the inner glass substrate of the DDBP cell along the direction perpendicular to the polarisation of the pump beam. The adsorbed MR molecules can effectively rotate the orientation of the liquid crystal (LC) molecules and thereby modulate the effective refractive index of the DDBP cell. The SEM images of the adsorbed regions of the illuminated DDBP samples were also taken for discussing the relation between the pump intensity and the photoinduced birefringence.     

Nucleic acid base grafted imino polyurethane

Preparation of two model polymers of polynucleotides with linear polyurethane backbone and 2-(thymin-1-yl)propionyl or 2-(uracil-1-yl)propionyl group as grafted pendant are described. 2-(Thymin-1-yl)propionic acid (TPA) and 2-(uracil-1-yl)propionic acid (UPA) were grafted into partial imino functionalized polyurethane, poly[(β,β′-diethylene)amine methylene bis(4-phenylcarbamate)]-75 (PU-NH-75), at the secondary amino group through amide bonds with 1-hydroxybenzotriazole (HOBT) using the active ester technique. Two novel polymer models of polynucleotides, poly[(N-(2-(thymin-1-yl)propionyl)-β,β′-diethylene)amine methylene bis(4-phenylcarbamate)]-75 (PU-NT-75) and poly[(N-(2-(uracil-1-yl)propionyl)-β,β′-diethylene)amine methylene bis(4-phenylcarbamate)]-75 (PU-NU-75) were obtained. The imino polyurethane PU-NH-75 was produced from the partially deprotected N-Cbz imino polyurethane, poly[N-(benzyloxycarbonyl-β,β′-diethylene)amine methylene bis(4-phenylcarbamate)] (PU-NCbz) which was prepared by the polyaddition of 4,4′-diphenylmethane diisocyanate (MDI) with diol monomer N-benzyloxycarbonyl-β,β′-dihydroxyethylamine (CbzHEA). Selective N-protection of N-benzyloxycarbonyloxy-5-norbornene-2,3-bicarboximide (CbzONB) with β,β′-dihydroxyethylamine (HEA) gave the N-Cbz protected diol monomer HEA. The related monomer model compounds were also prepared by the same methods.     

Potentiometric and thermodynamic studies of 3-methyl-1-phenyl-{p-[N-(pyrimidin-2-yl)-sulfamoyl]phenylazo}-2-pyrazolin-5-one and its metal complexes

The dissociation constants of 3-methyl-1-phenyl-{p-[N-(pyrimidin-2-yl)sulfamoyl]phenylazo}-2-pyrazolin-5-one and metal-ligand stability constants of its complexes with some transition metal ions have been determined potentiometrically in 0.1 M-KCl and ethanol—water mixture (30 vol. %). The order of the stability constants of the formed complexes increases in the sequence Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, La³⁺, Hf³⁺, UO ₂ ²⁺ , Zr⁴⁺. The effect of temperature was studied and the corresponding thermodynamic parameters (ΔG, ΔH, and ΔS) were derived and discussed. The dissociation process is nonspontaneous, endothermic, and entropically unfavourable. The formation of the metal complexes was found to be spontaneous, exothermic, and entropically favourable. Abstracted from his M.Sc. Thesis.     

Single crystal X-ray structure and optical properties of anthraquinone-based dyes

This study focuses on the preparation, single crystal X-ray diffraction, characterization, and optical properties of some anthraquinone-based dyes. The anthraquinone-based antimicrobial dye N-{2-[(9,10-dioxo-9,10-dihydroanthracen-1-yl)amino]-2-oxoethyl}-N,N-dimethylbutan-1-aminium chloride monohydrate (III) was obtained from 1-aminoanthraquinone (I) via 2-chloro-N-(9,10-dioxo-9,10-dihydroanthracen-1-yl)acetamide (II) using known preparation and characterization methods. Single crystal X-ray diffraction analysis of III revealed a monoclinic system, space group P2₁/n, Z = 4. Photoluminescence properties of anthraquinone dyes I–III were also investigated. These dyes gave an intense emission (λ_max = 341 nm) upon the irradiation by UV light and showed photoluminescence quantum yields of 73 %, 66 %, and 61 % with long excited-state lifetimes of 6.87 ns, 6.14 ns, and 5.69 ns, respectively. These anthraquinone dyes are of interest as an organic light emitting material for electroluminescent devices.     

High Photosensitive Sol-Gel Hybrid Materials for Direct Photo-Imprinting of Micro-Optics

Sol-gel derived inorganic-organic hybrid materials (HYBRIMERs) were found to have high photosensitivity arising from large changes in refractive index and volume upon exposure to light. These materials combined different photosensitive mechanisms due to the presence of polymers and silica in the HYBRIMER structure. Photo-induced densification of a germanium-doped HYBRIMER gave an increase in refractive index accompanying a volume contraction. A methacrylate HYBRIMER was decomposed by long UV illumination, giving a low refractive index and resulting in a reduction in film thickness. Also, photo-initiators were locked inside the methacrylate HYBRIMER during illumination, giving a simultaneous increase in the refractive index and film thickness. Direct photo-imprinting using the photosensitive HYBRIMER was demonstrated for simple fabrication of gratings, microlens, and waveguides using a photomask, a phase mask, an interferometer, and laser writing.     

Synthesis of diols containing nucleic acid bases and their polyesters

Preparation of four diols containing nucleic acid bases derived from 3-(thymin-1-yl)propanoic acid (3-TPA) and 3-(uracil-1-yl)propanoic acid (3-UPA), and the corresponding model polymers of polynucleotides with linear polyester backbone and nucleic acid base derivative as pendant side chains are described. N-(1′,3′-Dihydroxy-2′-methyl-2′-propyl)-3-(thymin-1-yl)propionamide ( VIa , 3-HMPTPA), N-(1′3′-dihydroxy-2′-methyl-2′-propyl)-3-(uracyl-1-yl)propionamide ( VIb , 3-HMPUPA) and their isomers, N(β,β-dihydroxyethyl)-3-(thymin-1-yl)propionamide ( VIIa , 3-HETPA), and N-(β,β-dihydroxyethyl)-3-(uracil-1-yl)propionamide ( VIIb , 3-HEUPA) were synthesized through the selective N-acylation of 2-methyl-2-amino-1,3-propanediol and diethanolamine with 3-TPA and 3-UPA, respectively, by the active ester-N-hydroxyl-1,4-epoxy-5-cyclohexene-2,3-dicarboximide (HOEC) method. The resulting diols were polycondensed with active diamide of benzotriazole (HBT) such as 1,1′-(isophthaloyl)bis-benzotriazole (IPBBT), giving polyesters containing thymine and uracil derivatives as the side group, by the selective O-acrylation of active amide-benzotriazole method.     

Water‐Promoted Ring‐Opening Reactions of N‐Substituted Saccharins and Phthalimides by Amines

The reactions of N‐substituted saccharins and phthalimides with amines were promoted by water. Various o‐sulfamoyl benzamides and N,N′‐disubstituted phthalamides were prepared in moderate to good yields. These reactions have prominent advantages, such as short reaction time, less by‐products and simple isolation of the products. Water can probably stabilize the reaction intermediates and facilitate precipitation of the ring‐opening products. When steric hindrance arose, hydrolytic compounds, either free acid or salts of the acids, were obtained. Possible reason for the formation of amine salts of o‐sulfamoyl benzoic acids was proposed.     

UV‐induced refractive index modulation of photoreactive polymers bearing N‐acylcarbazole groups

In this study, we report on the synthesis and characterization of photoreactive polymers bearing N‐acetylcarbazole and N‐formylcarbazole groups, respectively. These polymers were easily accessible by polymer analogous acylation of commercially available poly‐(2‐vinylcarbazole). While poly(1‐(2‐vinyl‐9H‐carbazol‐9‐yl)ethanone) (poly‐ 1 ) undergoes a partial photochemical Fries rearrangement, poly(2‐vinyl‐9H‐carbazole‐9‐carbaldehyde) (poly‐ 2 ) decarbonylates smoothly when exposed to UV irradiation. The difference in reactivity between the two acylated polymers is because of the lower stability of the formyl radical, which is formed in the first stage of this photoreaction. Ellipsometric measurements of thin films showed that the photo‐Fries rearrangement in poly‐ 1 causes a change in refractive index by Δn = +0.01 at 650 nm. UV illumination of poly‐ 2 results in a change of the refractive index by Δn = +0.03 at 650 nm, which can be explained by the high yield of the photodecarbonylation of the N‐formylcarbazole groups. Refractive index patterns can be easily realized using lithographic techniques as demonstrated by optical microscopy using a phase contrast set‐up for visualization. Patterned films of poly‐ 1 and poly‐ 2 with feature sizes of about 5 μm were obtained with a mask aligner. Photoreactive polymers bearing N‐acylcarbazole groups are of potential interest for optical applications such as waveguides, optical switches, and data storage devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010