Inclusion [2]complexes based on the cryptand/diquat recognition motif

Seven diquat-based inclusion [2]complexes were studied by proton NMR spectroscopy, electrospray ionization mass spectrometry, and X-ray analysis. The hosts used in these inclusion [2]complexes are bis(5-hydroxymethyl-1,3-phenylene)-32-crown-10, a bis(m-phenylene)-26-crown-8-based cryptand, and five bis(m-phenylene)-32-crown-10-based cryptands. Bis(m-phenylene)-32-crown-10-based cryptands have been proved to be able to complex diquat much more strongly than bis(m-phenylene)-32-crown-10 itself and one containing a pyridyl moiety has one of the highest K_a values reported to date. These hosts form 1:1 complexes with diquat in solution and in the solid state. It was found that the improved binding from bis(m-phenylene)-32-crown-10 to bis(5-hydroxymethyl-1,3-phenylene)-32-crown-10 was due to a supramolecular cryptand structure formed by chelation of the two terminal OH moieties of bis(5-hydroxymethyl-1,3-phenylene)-32-crown-10 with a water molecule as a hydrogen-bonding bridge.     

Polypyrazolinones from aromatic di(propynoic ester)s and aromatic dihydrazines

Novel polypyrazolinones with inherent viscosities ranging from 0.12 to 0.44 dL/g were prepared by the Michael-type nucleophilic addition-cyclization of various dihydrazines with 3,3′-(1,3- or 1,4-phenylene)bis(ethyl propynoate) (1,3- or 1,4-PEP) and 3,3′-(1,4-phenylene)bis(phenyl propynoate) (1,4-PPhP) in N-methylpyrrolidone (NMP) solution at 25–110°C. The polymers exhibited moderate thermal stability with initial weight loss in air about 200°C and in nitrogen about 300°C (TGA). No apparent T_g′s were observed by DSC analysis. The synthesis and characterization of the polypyrazolinones is discussed.     

Ferroelectric smectic meso-phase formed by banana-shaped achiral liquid crystals

A new banana-shaped achiral molecule, 1,3-phenylene bis[4-(3-chloro-4-n-octyloxyphenyliminomethyl)benzoate] (PBCOB) has been synthesized, and its ferroelectric properties and homeotropic alignment investigated. The presence of a lateral chloro-substituent in the Schiff 's base moiety prevents the regular stacking of molecules and results in lowering the transition temperature and the degree of crystallinity of the switchable banana phase. Their smectic mesophases, including a switchable banana phase B₇, were characterized by differential scanning calorimetry, X-ray scattering and polarizing optical microscopy. Both the left- and right-handed helical domains are spontaneously formed upon cooling from the isotropic liquid to the switchable banana phase B₇. By X-ray study, the smectic phases showed a layer spacing of 38.1 Å, compatible with the end-to-end distance of the molecule with a bent conformation. Significantly, the smectic B7 phase exhibited a periodicity of 292 Å that corresponds to a helical structure with periodicity about 7.5 times 38.1 Å. The spontaneous polarization for PBCOB is about 50 nCcm^-2 and shows a temperature dependence. The ferroelectric lyomesophase of PBCOB showed a ferroelectric electro-optical switching range extending more than 50°C, switchable at room temperature.     

Fabrication of vertical alignment liquid crystal cell without forming a conventional polyimide-alignment layer

Two series of asymmetric banana-shaped compounds have been synthesized and studied. In the 1,3-phenylene bis[4-(4′-alkoxybenzoyloxy)]benzoate series the lack of symmetry was derived solely from the difference in length of the two terminal alkoxy chains. In the 3,4′-biphenylene bis[4-(4′-alkoxybenzoyloxy)]benzoate series the asymmetric nature originates from the 3,4′-substitution of the central biphenyl group and from the difference in length of the two terminal chains. All the melting points of the asymmetrical compounds in the series with the central phenyl unit are lower than those of the symmetrical compounds. The liquid crystalline B₁ or B₂ phase was retained in all cases. In the series with the central biphenyl unit the compounds with the shortest chain attached to the para-position of the central biphenyl unit have the lowest melting points. A significant lowering of the melting points in comparison with the symmetrically substituted compounds, however, could not be achieved. All the compounds of both series show a layer spacing which is comparable to those of the symmetrically substituted parent compounds. The observed switching behaviour of both the symmetric and asymmetric compounds with a B₂ phase was antiferroelectric.     

Poly(enonsulfides) from the addition of aromatic dithiols to aromatic dipropynones

Novel poly(enonsulfides) were prepared with inherent viscosities as high as 1.35 dL/g by nucleophilic addition of various aromatic dithiols to 1,1′-(1,3- or 1,4-phenylene)bis(3-phenyl-2-propyn-1-one) in m-cresol at 25–40°C. A tough clear yellow film with a tensile strength of 11,300 psi and a tensile modulus of 466,000 psi at 25°C was cast from a chloroform solution of the polymer prepared from 1,3-dithiobenzene and 1,1′-(1,4-phenylene)bis(3-phenyl-2-propyn-1-one). The poly(enonsulfides) exhibited T_g's as high as 180°C and weight losses of approximately 10% at 331°C in air. The synthesis and characterization of several poly(enonsulfides) are discussed.     

Phase behaviour of thermotropic banana-shaped compounds under pressure

The phase behaviour of two achiral bent core banana-shaped compounds, the hexyloxy (compound I) and decyloxy (compound II) members of the 1,3-phenylene bis[N-(2-hydroxy-4-n-alkoxybenzylidene)-4′-aminobenzoate] series was investigated under hydrostatic pressures up to 300?MPa using high pressure differential thermal analysis and light transmission methods. The reversible transition sequence crystal (Cr₁)–B₁ phase–isotropic liquid (I), observed at room pressure for compound I, remains in the pressure region up to c 70?MPa. At higher pressures a pressure-induced crystalline phase (Cr_i) appears between the Cr₁ and B₁ phases, its temperature region becoming wider with increasing pressure. The temperature vs. pressure phase diagram shows a triple point of 72.9?MPa and 160.3°C for the Cr₁, Cr_i and B₁ phases, indicating the lower limit of pressure for the Cr_i phase. In compound II the reversible transition sequence crystal (Cr₁)–B₂ phase–I is seen over the whole pressure region, and the temperature range of the B₂ phase remains unaltered. It is concluded that both the B₁ and B₂ banana phases are stable over the whole pressure region studied.     

Preparation of silicon containing polymers. II.. Effect of structure on the thermal stability of organosilicon aramids

Two silicon-containing acid dichlorides, bis(4-chlorocarbonylphenyl)dimethylsilane and bis(4-chlorocarbonylphenyl)diphenylsilane, were synthesized and reacted with 1,3-phenylene diamine, 1,4-phenylene diamine, 4,4′-diaminodiphenyl, 4,4′-diaminodiphenyl methane 4,4′-diaminodiphenyl ether, and 4,4′-diaminodiphenyl sulfone in the preparation of 12 structurally different high molecular weight aromatic polyamides. A low-temperature interfacial polycondensation technique was used. Most of the polyamides formed tough, transparent, flexible films and were characterized by solubility, solution viscosity, infrared spectroscopy (IR), and glass transition temperature (T_g). The thermal behavior of these aramids was studied by dynamic thermogravimetry. The effect of diamine and acid dichloride structure on the aramids properties is also discussed.     

Banana-shaped mesogens: a new homologous series of compounds exhibiting the B7 mesophase

The synthesis and characterization of a new homologous series of compounds, the 2-cyano-1,3-phenylene bis[4-(4-n-alkoxyphenyliminomethyl)benzoates] derived from 2-cyanoresorcinol is reported. All the compounds are enantiotropic mesogens and exhibit the fascinating B₇ mesophase. The characterization of the mesophase was performed using polarizing optical microscopy, differential scanning calorimetry, X-ray diffraction and electro-optical studies.     

Synthesis and photoswitching properties of bent-shaped liquid crystals containing azobenzene monomers

Three novel bent-shaped monomers, namely 1,3-phenylene bis-{4-[4-(n-allyloxyalkyloxy)phenylazo]benzoate} 5a–c, containing azobenzene as side arms, resorcinol as central units and terminal double bonds as polymerisable functional groups were synthesised and characterised. The mesophase behaviour was investigated by polarising optical microscopy, differential scanning calorimetry and X-ray diffraction measurements and it was found that all three compounds display SmA_intercal mesophases. These bent-shaped molecules exhibit strong photoisomerisation behaviour in solutions in which trans to cis isomerisation takes about 50 seconds whereas the reverse process takes almost 31 hours.     

Antiferroelectric liquid crystal from a banana-shaped achiral molecule

A new banana-shaped achiral compound, 1,3-phenylene bis[4-(3-fluoro-4-n-octyloxyphenyliminomethyl)benzoate] (PBFOB) was synthesized and its antiferroelectric liquid crystallinity determined. The PBFOB was characterized by differential scanning calorimetry, X-ray diffractometry in the small and wide angle regions, and polarizing optical microscopy; its polarization and antiferroelectric properties were also investigated. The presence of a lateral fluoro-substituent in the banana-shaped achiral molecules containing a Schiff's base mesogen induced a decrease in melting temperature and formation of the switchable smectic B₂ phase in the melt. The spontaneous polarization for PBFOB was about 250 nC cm^-2 and the polarization of this phase switched on the reversal of an applied electric field.     

Multicomponent Synthesis of Thiazole,Selenazole, Pyrane,and Pyridine Derivatives,Initiated by the Knoevenagel Reaction

Russian Journal of Organic Chemistry - (2E,2′E)-3,3′-(Propane-1,3-diyl)bis[oxy(4,1-phenylene)]bis[2-(4-aryl-1,3-thiazol-2-yl)acrylonitriles] and functionally substituted pyridines and...     

Synthesis of aromatic polyethers by Scholl reaction. V. Synthesis and polymerization of 1,3-bis[4-(1-naphthoxy) benzoyl]benzene, 1,4-bis[4-(1-naphthoxy)benzoyl]benzene,bis[4-(1-naphthoxy)phenyl]methane, 1,3-bis[4-(1-naphthoxy) phenylmethyl]benzene,and 1,4-bis-[4-(1-naphthoxy)phenylmethyl]benzene

This article describes the synthesis and the cation-radical polymerization (Scholl reaction) of 1,3-bis[4-(1-naphthoxy) benzoyl] benzene ( 6 ) and 1,4-bis[4-(1-naphthoxy) benzoyl]- benzene ( 7 ) initiated by FeCI₃. This polymerization produced poly(ether ether ketone ketone)s (PEEKK) of number average molecular weight (M?_n) up to 5400 g/mol. The synthesis of bis[4-(1-naphthoxy) phenyl] methane ( 8 ), 1,3-bis[4-(1-napthoxy) phenylmethyl] benzene ( 9 ), and 1,4-bis[4-(1-naphthoxy) phenylmethyl] benzene ( 10 ) are also described. Polyethers of M?_n up to 15400 g/mol at a FeCl₃/monomer molar ratio of 2/1 were obtained. An increased polymerizability of the monomers 9 and 10 containing two CH₂ groups versus that of the corresponding monomers containing two carbonyl groups ( 6 and 7 ) was observed. This enhanced polymerizability was explained based on the increased nucleophilicity of monomers 9 and 10 .     

Synthesis and Pharmacological Evaluation of Some Novel Imidazo[2,1-b][1,3,4]thiadiazole Derivatives

Synthesis of bis‐1,3‐{6′‐arylimidazo[2,1‐b][1,3,4]thiadiazol‐2‐yl}‐1,2,2‐trimethylcyclopentane ( 3 ), bis‐1,3‐{thiadiazolo[2′,3′:2,1]imidazo[4,5‐b]quinoxalinyl}‐1,2,2‐trimethylcyclopentane ( 5 ) has been achieved by the reaction of bis‐(5′‐amino‐1′,3′,4′‐thiadiazolyl)‐1,2,2‐trimethylcyclopentane with α‐haloketones, 2,3‐dichloroquinoxaline respectively. Bromination of compound 3 furnished bis‐1,3‐{5′‐bromo‐6′‐arylimidazo[2,1‐b][1,3,4]thiadiazol‐2‐yl}‐1,2,2‐trimethylcyclopentane ( 4 ). The structural assignment of these compounds was supported by IR, ¹H NMR and elemental analysis data. The antimicrobial, anti‐inflammatory and antifungal activities of some of the compounds have also been evaluated.     

Regularly alternating poly(amideimide)s containing pendent pentadecyl chains: Synthesis and characterization

Two new aromatic diamines containing preformed amide linkages, viz., N,N′-(4-pentadecyl-1,3-phenylene)bis(4-aminobenzamide) I and N,N′-(4-pentadecyl-1,3-phenylene)bis(3-aminobenzamide) II, were synthesized by reaction of 4-pentadecylbenzene-1,3-diamine with 4-nitrobenzoylchloride and 3-nitrobenzoylchloride, followed by reduction of the respective dinitro derivatives. A series of new poly(amideimide)s was synthesized by polycondensation of I and II with four commercially available aromatic dianhydrides, viz., pyromellitic dianhydride (PMDA), 4,4′-biphenyltetracarboxylic dianhydride (BPDA), 4,4′-oxydiphthalic anhydride (ODPA), and 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6-FDA) in N,N-dimethylacetamide (DMAc) employing conventional two step method via poly(amic acid) intermediate followed by thermal imidization. Reference poly(amideimide)s were synthesized by polycondensation of N,N′-(1,3-phenylene)bis(4-aminobenzamide) and N,N′-(1,3-phenylene)bis(3-aminobenzamide) with the same aromatic dianhydrides. Inherent viscosities of poly(amideimide)s containing pendent pentadecyl chains were in the range 0.37-1.23 dL/g in N,N-dimethylacetamide at 30 ± 0.1 °C indicating the formation of medium to high molecular weight polymers. The poly(amideimide)s containing pendent pentadecyl chains were found to be soluble in N,N-dimethylacetamide, N,N-dimethylformamide, 1-methyl-2-pyrrolidinone and pyridine and could be cast into transparent, flexible and tough films from their N,N-dimethylacetamide solution. Wide angle X-ray diffraction patterns exhibited broad halo indicating that the polymers were essentially amorphous in nature. X-ray diffractograms also displayed sharp reflection in the small angle region (2θ ≈ 3°) for poly(amideimide)s containing pentadecyl chains indicating the formation of layered structure arising from packing of flexible pentadecyl chains. The glass transition temperatures observed for reference poly(amideimide)s were in the range 331-275 °C and those for poly(amideimide)s containing pendent pentadecyl chains were in the range 185-286 °C indicating a large drop in T_g owing to the “internal plasticization” effect of pentadecyl chains. The temperature at 10% weight loss (T₁₀), determined by TGA in nitrogen atmosphere, were in the range 460-480 °C indicating their good thermal stability.     

Partially bio‐based poly(amide imide)s by polycondensation of aromatic diacylhydrazides based on lignin‐derived phenolic acids and aromatic dianhydrides: Synthesis,characterization, and computational studies

Two new bio‐based diacylhydrazide monomers, namely, 4,4′‐(propane‐1,3‐diylbis(oxy))bis(3‐methoxybenzohydrazide) and 4,4′‐(propane‐1,3‐diylbis(oxy))bis(3,5‐dimethoxybenzohydrazide) were synthesized starting from lignin‐derived phenolic acids, namely, vanillic acid and syringic acid. A series of poly(amide imide)s was synthesized by polycondensation of these diacylhydrazide monomers with commercially available aromatic dianhydrides. Poly(amide imide)s showed inherent viscosity in the range 0.44–0.56 dL g^?1 and exhibited good solubility in organic solvents. Poly(amide imide)s could be cast into transparent, flexible, and tough films from their N ,N‐dimethylacetamide solutions. Poly(amide imide)s showed 10% weight loss in the temperature range 340–364 °C indicating their good thermal stability. Glass transition temperature (T _g) of poly(amide imides)s were measured by DSC and DMA which were in the range 201–223 °C and 214–248 °C, respectively. The T _g values of poly(amide imide)s were dependent on the number methoxy substituents on aromatic rings of diacylhydrazide monomers. Molecular dynamics simulation studies revealed that chain rigidity is the dominant factor for observed trends in T _g. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3636–3645     

Synthesis and polymerization of novel formamidinium salts: A new pathway to polyamides derived from aromatic diamines

A new polycondensation pathway has been developed for the preparation of polyamides at high temperatures. p-Phenylenediamine was converted to N,N-p-phenylene bis(N′,N′-dimethylformamidine) (I), which formed 1–1 and 2–1 salts with terephthalic and adipic acids, respectively: Dicarboxylate salts were polymerizable by heating in bulk or suspension. Low-molecular-weight poly(p-phenyleneterephthalamide) was obtained from N,N-p-phenylene bis(N',N'-dimethylformamidinium) terephthalate above 225°C. The low degree of polymerization was due to terephthalic acid sublimation as well as to the well-known intractability of poly(p-phenyleneterephthalamide). High-viscosity poly(p-phenyleneadipamide) was obtained from N,N-p-phenylene bis(N′,N′-dimethylformamidinum hydrogen adipate) above 200°C. Both salts liberated dimethylformamide (DMF) during polymerization. The adipate salt also released 1 mole of adipic acid during the high-temperature vacuum stage of polymerization. A polycondensation mechanism was proposed for each salt, based on thermal gravimetric analysis (TGA-MS) and infrared (IR) analyses. The hydrolysis of N,N-p-phenylene bis(N',N'-dimethylformamidine), N,N-p-phenylene bis(N',N'-dimethylformamidinium chloride), and the two dicarboxylate salts of (I) was monitored by nuclear magnetic resonance (NMR) at room temperature. The dihydrochloride salt was most resistant to hydrolysis (k_H 6.9 × 10^?9 sec^?1; relative rate 1.0) followed by (I) 7.1, terephthalate salt, 14.9, and adipate salt, 27.2. Both dicarboxylate salts possessed sufficient hydrolytic stability for use as polycondensation monomers     

Synthesis,structure, and complexing ability of fluoroalkyl-containing 2,2′-(biphenyl-4,4′-diyldihydrazono)bis(1,3-dicarbonyl) compounds

New fluoroalkyl-containing 2,2′-(biphenyl-4,4′-diyldihydrazono)bis(1,3-diketones) and 2,2′-(biphenyl-4,4′-diyldihydrazono)bis(3-oxopropionates) were synthesized by azo coupling of the corresponding 1,3-dicarbonyl compounds with biphenyl-4,4′-bis(diazonium) dichloride. Complexing ability of the obtained bis-hydrazones was studied, and new coordination compounds of the general formula M₂L₂ [where M = Ni(II), Cu(II); L = fluoroalkyl-containing 2,2′-(biphenyl-4,4′-diyldihydrazono)bis(1,3-diketone)] were obtained.     

Synthesis and characterization of tetra-armed-thiosemicarbazone and its salen/salophen capped transition metal complexes: Investigation of their thermal and magnetic properties

In this work, we aimed to synthesize and characterize a novel tetra-directional ligand, (2E,2′E)-2,2′-((((2-(1,3-bis(4-((E)-(2-carbamothioylhydrazono)methyl)phenoxy)propan-2-ylidene)propane-1,3-diyl)bis(oxy))bis(4,1-phenylene))bis(methanylylidene))bis(hydrazinecarbothioamide) (5), including thiosemicarbazone group and its novel tetra-directional-tetra-nuclear Schiff base complexes. For this purpose, we used 1,4-dibromo-2,3-bis(bromomethyl)but-2-ene (2) as starting material. 4,4′-((2-(1,3-Bis(4-formylphenoxy)propan-2-ylidene)propane-1,3-diyl) bis(oxy))dibenzaldehyde (3) was synthesized by the reaction of an equivalent 1,4-dibromo-2,3-bis(bromomethyl)but-2-ene (2) and 4 equivalents of 4-hydroxybenzaldehyde. Then, compound 5 was synthesized in high yield (86%) by a condensation reaction of compound 3 with thiosemicarbazide (4). Finally, four novel tetra-nuclear Cr(III) or Fe(III) complexes of compound 5 were synthesized. The synthesized compounds were characterized using elemental analyses, ¹H NMR, Fourier transform–infrared spectrometry, liquid chromatography–mass spectrometry (ESI⁺), and thermal analyses. The metal ratios of the prepared complexes were determined using an atomic absorption spectrophotometer. We also investigated their effects on the magnetic behaviors of [salen, salophen, Cr(III)/Fe(III)] capped complexes. The complexes were found to be low-spin distorted octahedral Fe(III) and distorted octahedral Cr(III), all bridged by thiosemicarbazone.     

Polymeric mesoions, 3. Synthesis of polymeric mesoionic 1,3-diazinium-olates via polymer analogous modification of a polythiourea from m-phenylenediamine and p-phenylene diisothiocyanate

Mesoionic poly(1,1′-(1,3-phenylene)-3,3′-(1,4-phenylene)-bis(5-decyl-2-decylthio-4,6-dioxo-1,3-diazine)) ( 6 ) was prepared by cyclisation of the isothiourea component of poly(1,1′-(1,3-phenylene)-3,3′-(1,4-phenylene)-bis(2-decylisothiourea)) ( 4 ) with decylmalonic acid (5) by use of dicyclohexylcarbodiimide (DCC). Polymer 4 was obtained by polymer analogous alkylation of poly(1,1′-(1,3-phenylene)-3,3′-(1,4-phenylene)-bisthiourea) ( 3 ). For comparison of spectroscopic data, 5-butyl-2-propylthio-4,6-dioxo-1,3-diphenyl-1,3-diazine ( 9 ) was synthesized as low molecular weight model compound.     

Facile synthesis and properties of a new generation of soluble and thermally stable polyimides

A new diamine, 1,4-phenylene bis((E)-1-(4-chloro-3-aminobenzylidene) thiourea) (PCABT), containing phenylthiourea and azomethine groups was prepared from the reduction of dinitro compound, 1,4-phenylene bis((E)-1-(4-chloro-3-nitrobenzylidene)thiourea), PCNBT. The structures of resulting monomers were characterized by elemental analysis, FTIR, ¹H and ¹³C NMR techniques. Afterwards, this diamine was reacted with various aromatic dianhydrides (ODPA, BTDA and 6FDA) in glacial acetic acid to afford poly(phenylthiourea azomethine imide)s (PPTAIs) with η_inh of 1.59-1.66 dL/g, depending on the dianhydride used. The ensuing PPTAIs exhibited ample solubility in organic solvents (DMAc, DMF, DMSO and NMP) and were obtained in quantitative yields. Also, all polyimides were amorphous according to wide-angle X-ray determination. GPC measurements of polymers revealed M_w around 69,000-72,000. Moreover, thermogravimetric analyses indicated that PPTAIs were fairly stable up to 550 °C, and 10% weight loss temperatures were recorded in the range of 563-578 °C (N₂ atmosphere). Ultimately, these polyimides own high glass transition temperatures about 281-285 °C.