三苯胺染料在钴电解质电池中的光伏性能

合成了4种己氧基取代的三苯胺类有机染料,制备了钴电解质的染料敏化太阳能电池,研究了染料的共轭桥结构对电池的光电压和光电流的影响．结果表明,以噻吩环为共轭桥的有机染料在钴电解质的染料敏化太阳能电池中表现良好的光伏性能,在100 mW/cm²太阳光照射下,获得6.1％的光电转换效率．同时研究了染料的构效关系．     

基于石墨烯基电极染料敏化太阳能电池的研究进展

对近几年石墨烯基电极染料敏化太阳能电池的研究成果进行了追踪,分析了多种改性石墨烯电极应用于染料敏化太阳能电池后能量转换效率变化的原因,深入研究了改善石墨烯对电解质的还原电催化反应活性物理机理,为解决该电池存在的问题理清了思路,对该方向未来的研究工作给出了建议,探索和制备新材料以进一步打破石墨烯的层间堆叠是提高该电池性能的关键。     

基于石墨烯基电极染料敏化太阳能电池的研究进展

对近几年石墨烯基电极染料敏化太阳能电池的研究成果进行了追踪,分析了多种改性石墨烯电极应用于染料敏化太阳能电池后能量转换效率变化的原因,深入研究了改善石墨烯对电解质的还原电催化反应活性物理机理,为解决该电池存在的问题理清了思路,对该方向未来的研究工作给出了建议,探索和制备新材料以进一步打破石墨烯的层间堆叠是提高该电池性能的关键。     

染料敏化太阳能电池二氧化锡光阳极表面原子层沉积氧化铝研究

染料敏化薄膜太阳能电池作为一种新型的太阳能电池吸引了世界范围内的研究。采用二氧化锡代替传统的二氧化钛作为染料敏化太阳能电池的光阳极,使用含有I-/I-3氧化还原电解对的液态电解质。同时,通过原子层沉积(ALD)法,在150℃下使用三甲基铝(TMA)和水作为前驱体和氧化剂沉积氧化铝。并研究了ALD超薄氧化铝包覆二氧化锡颗粒对染料敏化太阳能电池光电转换效率的影响。椭圆偏振仪(SE)分析结果表明ALD每周期沉积速率约为1.2。X射线衍射(XRD)和场发射扫描电镜(FESEM)的结果表明,超薄氧化铝包覆没有影响多孔二氧化锡纳米晶薄膜的晶体结构和表面形貌。紫外-可见光谱(UV-Vis)研究发现随着氧化铝的沉积周期数增加,染料敏化电池光阳极吸附染料的能力增加。最后,对ALD氧化铝对染料敏化太阳能电池性能的影响机理进行了探讨。     

一种新型的染料敏化紫外光电池

利用浸渍提拉法制备了纳米TiO₂多孔膜.采用紫外光源,以[Fe(CN)₆]^3-/[Fe(CN)₆]^4-溶液为电解质,分别以两种染料敏化纳米TiO₂膜为光阳极制成了一种新型的紫外光电池,探讨了该电池的伏安特性曲线.电池最大电压为0.36 mV,最大电流密度为0.02 μA/cm²,同时对染料敏化电极的光电转换机理进行了初步讨论.     

染料敏化太阳能电池器件的研究进展

染料敏化太阳能电池（dye-sensitized solar cells,DSCs）作为一种新型的薄膜太阳能电池,是目前光伏电池领域的一个研究热点.文章首先介绍此类电池的基本结构、工作原理、影响电池性能的关键材料及其最新研究进展,而后重点分析了器件集成的设计模式,并对各种模式的研究进展与存在的问题进行了探讨.     

染料敏化太阳电池的实验室制备

根据染料敏化太阳电池的工作原理和结构构成,介绍了在基础实验条件下制备染料敏化太阳电池的方法.实验表明,采用天然染料敏化的TiO2半导体薄膜作为光阳极,镀碳的导电玻璃作为反电极,并选用含碘的氧化-还原电解质,通过组装能够产生一定的电能.     

TiO2表面质子化对染料敏化太阳能电池性能及吸附染料稳定性的影响

采用致密平整TiO₂薄膜作为染料敏化太阳能电池光电极,并研究了HCl处理表面质子化对电池性能的影响. 结果表明,HCl处理后电池的短路电流显著提升,电池的开路电压则有轻微的下降,电池电流提升了31%,而能量转化效率则提升了25%. 这是因为TiO₂的表面质子化增强了吸附染料与TiO₂间的电学耦合,提高了染料中激发电子向TiO₂导带的注入速率. 而电压的下降,一方面是由于质子化会引起TiO₂导带能级     

新型多孔凝胶电解质的制备及其在准固态柔性基染料敏化太阳电池中的应用

制备了一种新型多孔聚丙烯酸/十六烷基三甲基溴化铵聚吡咯凝胶电解质,并将其应用于柔性基染料敏化太阳电池(DSSC)。通过扫描电镜表征、热重分析测试、电化学性能测试和柔性电池光电性能测试等手段,分析了凝胶电解质对柔性基DSSC的光电性能影响。研究结果表明:随着聚吡咯的引入,提高凝胶电解质导电性以及催化电解质中的I-/I3-离子电对等性能,最终在100mW/cm2[大气质量(AM)1.5]光照条件下,测得基于该准固态凝胶电解质的柔性基DSSC光电转换效率达1.28%。     

染料敏化太阳电池及其进展

文章介绍了染料敏化太阳电池的研究背景和发展过程,简述了基于纳米TiO2半导体电极材料的染料敏化太阳电池的基本结构和工作机理.详细阐述了该电池国内外各项关键技术的实验和产业化研究最新成果,着重分析了染料敏化太阳电池的未来发展趋势,并对该电池的应用前景进行了展望.     

Study of the electrochemical performance of VO2+/VO2 + redox couple in sulfamic acid for vanadium redox flow battery

The present work was performed in order to evaluate sulfamic acid as the supporting electrolyte for VO²⁺/VO₂ ⁺ redox couple in vanadium redox flow battery. The oxidation process of VO²⁺ has similar electrochemical kinetics compared with the reduction process of VO₂ ⁺. The exchange current density and standard rate constant of VO²⁺/VO₂ ⁺ redox reaction on a graphite electrode in sulfamic acid are determined as 7.6?×?10^?4 A cm^?2 and 7.9?×?10^?5 cm s^?1, respectively. The energy efficiency of the cell employing sulfamic acid as supporting electrolyte in the positive side can reach 75.87 %, which is adequate for redox flow battery applied in energy storage. The addition of NH₄ ⁺ to the positive electrolyte can enhance the electrochemical performance of the cell, with larger discharge capacity and energy efficiency. The preliminary exploration shows that the vanadium sulfamate electrolyte is promising for vanadium redox flow battery and is worthy of further study.     

Quasi-solid state polymer electrolytes for dye-sensitized solar cells: Effect of the electrolyte components variation on the triiodide ion diffusion properties and charge-transfer resistance at platinum electrode

Quasi-solid state polymer electrolytes have been prepared from poly(vinylidenefluoride-co-hexafluoropropylene) (PVDF-HFP) as gelator for 1-ethyl-3-methylimidazolium based ionic liquids (with anions like trifluoromethanesulfonate [EMIM][TfO], bis(trifluoromethanesulfonyl)imide [EMIM][Tf₂N]) and polyacrylonitrile (PAN) for gelation of 1-ethyl-3-methylimidazolium dicyanamide [EMIM][DCA] as well as I⁻/I₃⁻ as the redox couple. All electrolytes exhibit high ionic conductivity in the range of 10^− 3 S/cm. The effect of gelation, redox couple concentration, I⁻/I₃⁻ ratio, choice of cations and additives on the triiodide diffusion and charge-transfer resistance of the platinum/electrolyte interface (R_ct) were studied. The apparent diffusion coefficient of triiodide ion (D(I₃⁻)) at various iodide/triiodide ratios in liquid and gelified electrolytes has been calculated from measurements of the diffusion limited current (I_lim) in electrochemical cell resembling the set-up of a dye-sensitized solar cell. The charge-transfer resistance of the platinum/electrolyte interface as well as the capacitance of the electrical double layer (C_dl) have been calculated from impedance measurements. Electrolytes with reduced content of polymer (2.5 wt.%) were doped with Al₂O₃ particles of different sizes (50 nm, 300 nm, 1 μm). The dispersion of the particles proceeds by speedy stirring of the hot electrolyte and the addition of PAN provides a homogeneous suspension. The addition of Al₂O₃ particles causes a slight increase of the triiodide diffusion constants. Furthermore the suggested enhancement of the charge transfer rate shows a dependence on the size of the particles.     

Bacto agar-based gel polymer electrolyte

The biopolymer of a Bacto agar-based gel polymer electrolyte (GPE) was prepared by addition of NaI and I₂ as redox couple. The prepared GPE was characterized using impedance spectroscopy and X-ray diffraction (XRD) in order to determine its electrical and structural properties, respectively. An optimized ionic conductivity of 12.41 × 10⁻⁴ S cm⁻¹ was achieved for the samples containing 1.6 M NaI and 50 μL I₂. Meanwhile, XRD revealed that the addition of NaI and I₂ altered agar properties and formed an amorphous structure. Linear sweep voltammetry showed that the electrochemical stability window of the sample had a working voltage of 2.0 V.     

Photovoltaic activity in a ZnSe/PEO–chitosan blend electrolyte junction

Thin films of ZnSe and PEO–chitosan blend polymer doped with NH₄I and iodine crystals were prepared to form the two sides of a semiconductor electrolyte junction. ZnSe was electrodeposited on indium tin oxide (ITO) conducting glass. The polymer is a blend of 50 wt% chitosan and 50 wt% polyethylene oxide. The polymer blend was complexed with ammonium iodide (NH₄I), and some iodine crystals were added to the polymer–NH₄I solution to provide the I⁻/I³⁻redox couple. The room temperature ionic conductivity of the polymer electrolyte is 4.32 × 10⁻⁶ S/cm. The polymer film was sandwiched between the ZnSe semiconductor and an ITO glass to form a ZnSe/polymer electrolyte/ITO photovoltaic cell. The open circuit voltage (V _oc) of the fabricated cells ranges between 200 to 400 mV and the short circuit current between 7 to 10 μA.     

Theory and experiment: Anion binding property of novel phenanthroline or aromatic bridged compounds

A series of artificial compounds, phenanthroline or aromatic bridged indoline derivatives, have been designed and synthesized. The interaction of these compounds with biologically important anions fluoride (F^?), acetate (AcO^?), dihydrogen phosphate (H₂PO₄^?), chloride (Cl^?), bromide (Br^?) and iodide (I^?) was determined by UV–vis, fluorescene titration and theoretical experiments. Results indicate that compound 1 (Di((1″,2″-dihydro-indol-3″-one-2″-hydrazone-1′-hydrazyl)-2′-methylene)-1,3-did-ehydebenzo) and 2 (Di((1″,2″-dihydro-indol-3″-one-2″-hydrazone-1′-hydrazyl)-2′-methylene)-1,3-didehyde-5-nitrobenzo) containing aromatic bridge do not show binding ability for various anions, and that compound 3 (Di((1″,2″-dihydro-indol-3″-one-2″-hydrazone-1′-hydrazyl)-2′-methylene)-2,9-dial-dehyde-1,10-phenanthroline) containing phenanthroline bridge shows the strongest binding ability for F^? among various anions, the moderate binding ability for AcO^? and H₂PO₄^?, and almost no binding ability for Cl^?, Br^?, I^?. The different binding ability of aromatic and phenanthroline bridged compounds may be related to the conjugative effect. What's more, the binding ability of compound 3 with F^? is not interfered by the existence of other anions. Hence, theoretical investigations explore the reasons of different binding ability between compound 3 and anions.     

Influence of pyrazole on the photovoltaic performance of dye-sensitized solar cell with polyvinylidene fluoride polymer electrolytes

We investigate the influence of the pyrazole content on the polyvinylidene fluoride (PVDF)/KI/I₂ electrolytes for dye-sensitized solar cells (DSSCs). The solid polymer electrolyte films consisting of different weight percentage ratios (0 20, 30, 40, and 50 %) of pyrazole doped with PVDF/KI/I₂ have been prepared by solution casting technique using N,N-dimethyl formamide (DMF) as a solvent. The as-prepared polymer electrolyte films were characterized by various techniques such as Fourier transform infrared spectroscopy (FT-IR spectroscopy), differential scanning calorimetry (DSC), X-ray diffractometer (XRD), alternate current (AC)-impedance analysis, and scanning electron microscopy (SEM). The 40 wt% pyrazole-PVDF/KI/I₂ electrolyte exhibited the highest ionic conductivity value of 9.52?×?10^?5 Scm^?1 at room temperature. This may be due to the lower crystallinity of PVDF and higher ionic mobility of iodide ions in the electrolyte. The DSSC fabricated using this highest ion conducting electrolyte showed an enhanced power conversion efficiency of 3.30 % under an illumination of 60 mW/cm² than that of pure PVDF/KI/I₂ electrolyte (1.42 %).     

Study of pristine and carbon-coated LiCoPO<Subscript>4</Subscript> olivine material synthesized by modified sol–gel method

LiCoPO₄ and LiCoPO₄/C electrode active material was synthesized by a simple single-step protocol namely citric acid-assisted, isopropanol-added sol–gel method. Structural and morphology studies reveal the formation of single-phase products of pristine as well as in situ carbon-coated nano-sized grains of genuine purple-colored product of LiCoPO₄ and black-colored LiCoPO₄/C due to uniform carbon coatings, respectively. In situ carbon coating was confirmed by scanning transmission electron microscopy imaging which exhibits the in situ nanocarbon coating networks. The electrode active characteristics of the synthesized products confirmed by resolved cyclic voltammograms corresponding to cobalt redox couple (Co²⁺/Co³⁺) confirm the lithium extraction/insertion reversible processes. Carbon coating ensures better resolved near symmetric redox peaks with increased current profile indicative of enhanced rate capability (Li⁺ extraction/insertion), presumably due to the enhanced electrode conductivity of the host matrix by means of carbon coating.     

Effect of different compositions of ethylene carbonate and propylene carbonate containing iodide/triiodide redox electrolyte on the photovoltaic performance of DSSC

The effect of different compositions (in weight percent) of ethylene carbonate (EC) and propylene carbonate (PC) containing iodide/triiodide redox electrolyte on the photoelectrochemical performance of N719-sensitized nanocrystalline TiO₂ solar cell was studied. The cells consisted of 0.6 M 1-hexyl-2,3-dimethylimidazolium iodide, 0.1 M LiI, 0.05 M I₂ and 0.5 M 4-tert-butylpyridine in different compositions such as 1:1, 1:2, and 2:1 wt% of EC and PC. In 1:1 wt% of EC and PC containing redox electrolyte, short circuit photocurrent density (J _sc) increased and open circuit voltage (V _oc) decreased. But in 1:2 and 2:1 wt% of EC and PC containing redox electrolytes, V _oc increased and J _sc decreased but fill factor remained relatively constant. Dye-sensitized solar cells (DSSCs) prepared using these electrolytes give a short circuit photocurrent densities of 16.86, 12.71, and 12.09 mA/cm²; an open circuit voltages of 0.73, 0.78, and 0.79 V; fill factors of 0.63, 0.64, and 0.64; and an overall conversion efficiencies of 7.76, 6.34, and 6.13 % at an incident light of 100 mWcm^?2 for 1:1, 2:1, and 1:2 wt% of EC/PC containing redox electrolytes, respectively. The incident photon-to-current conversion efficiency was higher in the case of 1:1 wt% of EC and PC containing redox electrolyte than 1:2 and 2:1 wt% of EC and PC containing redox electrolyte. It revealed that 1:1 wt% of EC and PC containing iodide/triiodide redox electrolyte is an effective electrolyte system for the fabrication of long-term stable DSSC.     

Hydrothermal synthesis of carbon- and reduced graphene oxide-supported CoMoO4 nanorods for supercapacitor

Hybrid CoMoO₄ nanorods with carbon (C) and graphene oxide (rGO) are successfully synthesized via one-step hydrothermal process. Hybrid α-CoMoO₄ nanorods have shown excellent electrochemical performances compared to pristine CoMoO₄ in alkaline electrolyte. Specifically, CoMoO₄/C nanorod exhibits a maximum specific capacitance of 451.6 F g^?1 at the current density of 1 A g^?1, whereas CoMoO₄/rGO shows high specific capacitance of 336.1 F g^?1 at the same current density. Both the hybrid nanorods show good rate capability even at high current density of 20 A g^?1 and long-term cyclic stability. The observed electrochemical features of the hybrid CoMoO₄ nanostructure could be attributed to the presence of highly conductive carbonaceous material on unique one-dimensional nanorod microstructure which enhances the electrical conductivity of the nanorods thereby allowing faster electrolyte ion diffusion during the redox process.     

Effect of In3+ ions on the electrochemical performance of the positive electrolyte for vanadium redox flow batteries

Influence of In³⁺ ions on electrochemical performance of positive electrolyte for vanadium redox flow battery was investigated in this paper. The electrochemical activity and kinetics of V(IV)/V(V) redox couple can be enhanced by the addition of In³⁺ ions, and the optimal concentration of In³⁺ ions was found at 10 mM. At this condition, the oxidation peak current with 10 mM In³⁺ ions is 46.6 mA at a scan rate of 20 mV s^?1, larger than that of pristine electrolyte (41.8 mA), and the standard rate constant is 6.53?×?10^?5 cm s^?1, 42 % larger than that of the pristine electrolyte (4.58?×?10^?5 cm s^?1). The cell using electrolyte with 10 mM In³⁺ ions was assembled, and the charge–discharge performance was evaluated, and the average energy efficiency increases by 1.9 % compared with the pristine cell. The improved electrochemical performance may be ascribed to that In³⁺ ions change the hydration state of vanadium ions in electrolyte and promote charge transfer process.