Unusual change in molecular weight of polyhydroxyalkanoate (PHA) during cultivation of PHA-accumulating Escherichia coli

This study aimed to investigate the factors affecting molecular weight of poly[(R)-3-hydroxybutyrate] [P(3HB)] when polyhydroxyalkanoate (PHA) synthase (PhaRC_Bsp) from Bacillus sp. INT005 was used for P(3HB) synthesis in Escherichia coli JM109. It was found that the molecular weight of P(3HB) decreased with time in mid- and late-phase of culture and was strongly affected by culture temperature. At 37 °C culture temperature, the molecular weight of P(3HB) rapidly decreased from 4.4 × 10⁵ to 4.8 × 10⁴ with culture time, whereas it was almost unchanged at 25 °C. Kinetic analysis suggested that the decrease in molecular weight of P(3HB) was due to random scission of the polymer chain. The decrease in molecular weight of P(3HB) was not observed when PHA synthases other than PhaRC_Bsp were expressed. This study sheds light on the unique behaviour in molecular weight change of P(3HB) that is synthesized by E. coli expressing PhaRC_Bsp.     

Molecular weight characterization of poly[(R)-3-hydroxybutyrate] synthesized by genetically engineered strains of Escherichia coli

This study investigated the relationship of growth conditions, host strains and molecular weights of poly[(R)-3-hydroxybutyrate] [P(3HB)] synthesized by genetically engineered Escherichia coli. Various PHA synthases belonging to types I-IV enzymes were expressed in E. coli JM109 under the same experimental conditions, and the molecular weights of the polymers were characterized by gel permeation chromatography. The results demonstrate that P(3HB) polymers have varied molecular weights and polydispersities dependent on the characteristics of the individual PHA synthase employed. P(3HB) with high number-average molecular weights (M_n) [(1.5-4.0) × 10⁶] and narrow polydispersities (1.6-1.8) were synthesized by PHA synthases from Ralstonia eutropha (type I), Delftia acidovorans (type I) and Allochromatium vinosum (type III). Contrary to these, P(3HB) with relatively low M_n [(0.17-0.79) × 10⁶] and broad polydispersities (2.2-9.0) were synthesized by PHA synthases from Aeromonas caviae (type I), Pseudomonas sp. 61-3 (type II) and Bacillus sp. INT005 (type IV). Furthermore, the molecular weights of P(3HB) synthesized under various culture conditions, in various hosts of E. coli and by mutants of PHA synthase were characterized. It was found that, in addition to culture pH [Kusaka et al. Appl Microbiol Biotechnol 1997;47:140], other variances such as culture temperature, host strain and use of mutants are effective in changing polymer molecular weight.     

Biosynthesis and characterization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer from wild-type Comamonas sp. EB172

Poly(3-hydroxybutyrate) [P(3HB)] homopolymer and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] copolymer was produced by Comamonas sp. EB172 using single and mixture of carbon sources. Poly(3-hydroxyvalerate) P(3HV) incorporation in the copolymer was obtained when propionic and valeric acid was used as precursors. Incorporation of 3HV fractions in the copolymer varied from 45 to 86 mol% when initial pH of the medium was regulated. In fed-batch cultivation, organic acids derived from anaerobically treated palm oil mill effluent (POME) were shown to be suitable carbon sources for polyhydroxyalkanoate (PHA) production by Comamonas sp. EB172. Number average molecular weight (M_n) produced by the strain was in the range of 153-412 kDa with polydispersity index (M_w/M_n) in the range of 2.2-2.6, respectively. Incorporation of higher 3HV units improved the thermal stability of P(3HB-co-3HV) copolymer. Thus the newly isolated bacterium Comamonas sp. EB172 is a suitable candidate for PHA production using POME as renewable and alternative cheap raw materials.     

Mechanical properties and enzymatic degradation of poly[(R)-3-hydroxybutyrate] fibers stretched after isothermal crystallization near Tg

Poly[(R)-3-hydroxybutyrate] (P(3HB)) fibers with high tensile strength were prepared by stretching the fibers after isothermal crystallization near the glass transition temperature. Two samples with different molecular weights (M_w = 0.7 × 10⁶ and 4.3 × 10⁶) were used to investigate the effect on tensile strength. Increasing the time for isothermal crystallization of P(3HB) fibers resulted in a decrease in the maximum draw ratio. But, the tensile strength of P(3HB) fibers increased remarkably when the isothermal crystallization time was prolonged to more than 24 h. The tensile strength of low-molecular-weight drawn fibers was higher than that of high-molecular-weight fibers. Therefore, it can be concluded that this procedure does not increase the tensile strength of the high-molecular-weight drawn fibers. This is because, in this drawing method, small crystal nuclei grow initially during the isothermal crystallization process. Then, the molecular chains between the small crystal nuclei that acted as the entanglement points are oriented by stretching. In the case of the high-molecular-weight fibers, because the molecular length between the entanglement points of the small crystal nuclei is too long, the molecular chains are not sufficiently oriented by the stretching process. However, in the case of the low-molecular-weight fibers, the molecular length is suitable for generating the extended chains. Based on the result of X-ray analysis of P(3HB) fibers stretched after isothermal crystallization, fibers have the oriented α-form crystal with 2₁ helix conformation and β-form with planar zigzag conformation. The enzymatic degradation of the stretched P(3HB) fibers was performed by using an extracellular PHB depolymerase purified from Ralstonia pickettii T1. The enzymatic erosion rate of β-form was faster than that of α-form in the P(3HB) fibers stretched after isothermal crystallization.     

Engineering of pha operon on Cupriavidus necator chromosome for efficient biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) from vegetable oil

Cupriavidus necator H16C_Ac, previously constructed for production of poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) [P(3HB-co-3HHx)] from soybean oil, was further engineered aiming to increase 3HHx composition in the copolyester. PHA synthase gene derived from Aeromonas caviae on the H16C_Ac chromosome was replaced by a gene encoding the N149S/D171G mutant and this recombination enhanced PHA productivity as well as slightly increased 3HHx composition. Manipulation of phaA_Cn locus partially reduced the amount of 3HB unit concomitantly with relative increase of 3HHx composition, whereas deletion of phaB1_Cn resulted in drastic decline of 3HB unit in P(3HB-co-3HHx). Insertion of phaJ_Ac encoding (R)-specific enoyl-CoA hydratase from A. caviae into pha operon significantly enlarged 3HHx fraction without negative effects on the cell growth and polyester accumulation. Consequently, efficient production of P(3HB-co-3HHx) with 3HHx composition of 5.7-9.9 mol% was successfully achieved from soybean oil by the engineered strains.     

Evaluation of jatropha oil to produce poly(3-hydroxybutyrate) by Cupriavidus necator H16

Jatropha oil, a non-edible vegetable oil, may be an alternative substrate to food-grade oils for bioplastic production. Jatropha oil contains 93.9% palmitic acids, oleic acids and linoleic acids. High P(3HB) accumulation of 87 wt% from 13.1 g/L of cell dry weight (CDW) was obtained by Cupriavidus necator H16 when 12.5 g/L of jatropha oil and 0.54 g/L of urea were used. Lipase activity increased in the initial stages of P(3HB) production, when 1 g/L of jatropha oil was added to the preculture medium. Addition of oil in preculture did not affect final CDW or P(3HB) accumulation. P(3HB) production in a 10 L lab-scale fermenter gave a yield of 0.78 g P(3HB) per g jatropha oil used after 48 h. For the first time, this study proved that jatropha oil is a feasible and excellent carbon source for P(3HB) biosynthesis by C. necator H16 with potential for large-scale production. The toxins in jatropha oil did not affect the P(3HB) biosynthesis.     

Influence of pH on the Molecular Weight of Poly-3-hydroxybutyric Acid (P3HB) Produced by Recombinant Escherichia coli

The production of ultrahigh molecular weight poly-3-hydroxybutyric acid (P3HB) from carbohydrates by recombinant Escherichia coli harboring genes from Ralstonia eutropha was evaluated. In shaken-flask experiments, E. coli XL1 Blue harboring plasmid pSK::phaCAB produced P3HB corresponding to 40 and 27 % of cell dry weight from glucose and xylose, respectively. Cultures in bioreactor using glucose as the sole carbon source at variable pH values (6.0, 6.5, or 7.0) allowed the production of P3HB with molecular weight varying between 2.0 and 2.5 MDa. These figures are significantly higher than the values often obtained by natural bacterial strains (0.5–1.0 MDa). Contrary to reports of other authors, no influence of pH was observed on the molecular weight of the polymer produced. Using xylose, P3HB with high molecular weight was also produced, indicating the possibility to produce these polymers from lignocellulosic materials.     

Biosynthesis and biocompatibility of biodegradable poly(3-hydroxybutyrate-co-4-hydroxybutyrate)

Poly(3-hydroxybutyrate), PHB, and poly(3-hydroxybutyrate-co-4-hydroxybutyrate), P(3HB-co-4HB), consisting of 0-94% mole fraction of 4HB content, were produced in high content by Cupriavidus necator strain A-04. The carbon sources used for PHB production included sugars made locally in Thailand: refined sugarcane, brown sugarcane, rock sugar, toddy palm sugar and coconut palm sugar. The switching of the ratios of carbon to nitrogen, together with the ratios of fructose to 1,4-butanediol, were applied to P(3HB-co-4HB) production in fed-batch cultures. Optimal P(3HB-co-4HB) production was achieved with 112 g biomass and 73 g P(3HB-co-4HB) with 38% mole fraction of 4HB content. Next, P(3HB-co-4HB) with a 0, 5, 24, 38 and 64% mole fraction of 4HB content were purified and prepared as plastic films. The mechanical properties and biocompatibility of these films were tested and compared with commercial PHB, polystyrene (PS) and polyvinylchloride (PVC) prepared without additives. The results demonstrated that PHB had thermal and mechanical properties similar to those of commercial PHB. The P(3HB-co-4HB) polymers possessed melting temperature and glass transition temperature values higher than those reported previously. The mechanical properties were compared with those of PS and PVC. The in vitro biocompatibility was assessed using L929, human dermal fibroblast and Saos-2 human osteosarcoma cells. The cytotoxicity results and scanning electron micrographs showed that P(3HB-co-4HB) films have good surface characteristics and can promote cell attachment, proliferation and differentiation. Combined with their good mechanical properties, P(3HB-co-4HB) polymers possess potential usefulness for biomaterial applications in artificial skin tissue support and orthopedic support.     

Mechanical properties, structure analysis and enzymatic degradation of uniaxially cold-drawn films of poly[(R)-3-hydroxybutyrate-co-4-hydroxybutyrate]

Poly[(R)-3-hydroxybutyrate-co-4-hydroxybutyrate] (P(3HB-co-4HB)) films were prepared by uniaxial cold-drawing from an amorphous preform at a temperature below, but close to the glass transition temperature. Molecular and highly-ordered structures and physical properties of cold-drawn films were investigated by tensile testing, wide-angle X-ray diffraction and small-angle X-ray scattering. Enzymatic degradation of P(3HB-co-4HB) films was performed using an extracellular polyhydroxybutyrate depolymerase purified from Ralstonia pickettii T1. Tensile strength, elongation to break and Young’s modulus of P(3HB-co-4HB) with cold-drawn ratio 1200% reached 290 MPa, 58% and 2.8 GPa, respectively. X-ray fibre diagrams of cold-drawn P(3HB-co-4HB) films showed a strong reflection on the equatorial line, indicating a planar zigzag conformation (β-form) together with 2₁ helix conformation (α-form). The β-form seems to contribute to the high tensile strength, and a new mechanism of generation of the β-form is proposed. The enzymatic degradation rate increased with increasing draw ratio, and increased greatly with increasing 4HB content.     

Kinetics and mechanism of the ring opening polymerization of (R,S)-β-butyrolactone initiated with dibutylmagnesium

Ring opening polymerization (ROP) of (R,S)-β-butyrolactone (BL) using dibutylmagnesium (Bu₂Mg) as initiator was investigated both in bulk and in solution. The synthetic poly-3-hydroxybutyrates (P3HB) were characterized by ¹H NMR, ¹³C NMR, FT-IR and GPC. Effects of molar ratio of initiator to monomer, reaction temperature and time on the monomer conversion and the polymer molecular weight and its distribution were discussed. The kinetics of the solution polymerization of BL was examined and showed a first order both in monomer concentration and initiator concentration. The end groups analysis suggested that the monomer inserted into the growing chain proceeding through the coordination-insertion mechanism based on the acyl-oxygen bond scission rather than the alkyl-oxygen bond cleavage of the BL ring. Furthermore, a possible mechanism for the initiation and propagation procedures of P3HB synthesized from BL with Bu₂Mg was proposed.     

Effects of residual metal compounds and chain-end structure on thermal degradation of poly(3-hydroxybutyric acid)

Thermal degradation behaviours of poly(3-hydroxybutyric acid) (P(3HB); bacterial poly[(R)-3-hydroxybutyric acid] and synthetic poly[(R,S)-3-hydroxybutyric acid] samples, were examined under both isothermal and non-isothermal conditions. The inverse of number-average degree of polymerisation for all P(3HB) samples decreased linearly with degradation time during the initial stage of isothermal degradation at a temperature ranging from 170-190 °C. In addition, crotonyl unit was detected in the residual polymer samples as main ω-chain-end. These results indicate that the dominant thermal degradation reaction for P(3HB) is a random chain scission via cis-elimination reaction of P(3HB) molecules. It was found that the presence of either Ca or Mg ions enhances the depolymerisation of P(3HB) molecules, while that Zn ions hardly catalyse the reaction. As a result, a shift of thermogravimetric curves toward the lower temperature regions was observed for the P(3HB) samples containing high amounts of Ca and Mg compounds.     

Improved synthesis of P(3HB-co-3HV-co-3HHx) terpolymers by mutant Cupriavidus necator using the PHA synthase gene of Chromobacterium sp. USM2 with high affinity towards 3HV

Unlike polyhydroxyalkanoates (PHAs) copolymers, the controlled and efficient synthesis of PHA terpolymers from triglycerides and fatty acids are yet to be established. This study demonstrates the production of P(3HB-co-3HV-co-3HHx) terpolymer with a wide range of 3HV monomer compositions from mixtures of crude palm kernel oil and 3HV precursors using a mutant Cupriavidus necator PHB⁻4 transformant harboring the PHA synthase gene (phaC) of a locally isolated Chromobacterium sp. USM2. The PHA synthase of Chromobacterium has an unusually high affinity towards 3HV monomer. P(3HB-co-3HV-co-3HHx) terpolymers with 3HV monomer composition ranging from 2 to 91 mol% were produced. Generation of 3HHx monomers was affected by the concentration and feeding time of 3HV precursor. P(3HB-co-24 mol% 3HV-co-7 mol% 3HHx) exhibited mechanical properties similar to that of common low-density polyethylene. P(3HB-co-3HV-co-3HHx) terpolymers with a wide range of 3HV molar fraction had been successfully synthesized by adding lower concentrations of 3HV precursors and using a PHA synthase with high affinity towards 3HV monomer.     

Solvent effect in cis-1,4 polymerization of 1,3-butadiene by a catalyst based on neodymium

In this work a laboratory polymerization scale process was studied for the production of polybutadiene with high content of cis-1,4 repeating units. A Ziegler-Natta catalytic system based on neodymium versatate (catalyst), diisobutylaluminium hydride (cocatalyst) and tert-butyl chloride (chlorinating agent) was used. The influence of solvent nature (pure grade) and possible contaminants (electron donors) in a recovered solvent from a butadiene-styrene anionic polymerization industrial plant on the stereoselectivity and catalytic activity, molecular weight and molecular weight distribution of the resultant polybutadienes was studied. The polymers were characterized by infrared spectroscopy and size exclusion chromatography. Polybutadienes with cis-1,4 units content in the range of 99-98% were produced. The polymers weight-average molecular weight, , varied from 2.23 × 10⁵ to 4.47 × 10⁵ and the molecular weight distribution, MWD, from 3.1 to 5.1.     

Bioconversion of Glycerine Pitch into a Novel Yellow-Pigmented P(3HB-co-4HB) Copolymer: Synergistic Effect of Ammonium Acetate and Polymer Characteristics

Glycerine pitch waste generated from oleochemical industry was exploited as a carbon source for poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3HB-co-4HB)) copolymer production by a novel, yellow-pigmented bacterium Cupriavidus sp. USMAHM13 to improve the economics of microbial polyhydroxyalkanoate production and to establish a feasible waste management approach. Medium optimization using response surface methodology through shake-flask fermentation had led to the accumulation of P(3HB-co-51%4HB) copolymer using a combination of glycerine pitch (10 g/l), 1,4-butanediol (8.14 g/l), and ammonium acetate (2.39 g/l). P(3HB-co-4HB) copolymers with 4HB monomer compositions ranged from 3 to 40 mol% were obtained through batch fermentation in a bioreactor using different concentrations of ammonium acetate. The copolymers exhibited a wide range of material properties depending on the monomer composition and type of carbon sources. P(3HB-co-40%4HB) was a typical random copolymer, whereas other P(3HB-co-4HB) produced were blend copolymers. Carotenoid pigment which was produced simultaneously with the polymer production was found to have negligible effect on the mechanical and thermal properties of the P(3HB-co-4HB) copolymer films.     

Purification and characterization of an extracellular medium-chain length polyhydroxyalkanoate depolymerase from Thermus thermophilus HB8

During growth on medium-chain length (mcl) polyhydroxyalkanoates (PHAs), or on sodium octanoate Thermus thermophilus HB8 produces an extracellular mcl-PHA depolymerase. This enzyme was purified from the culture medium of sodium octanoate-grown cells to electrophoretic homogeneity by hydrophobic interaction chromatography using Octyl-Sepharose CL-4B and gel permeation chromatography using Sephadex G-150. The molecular mass of the purified enzyme was approximately 28 kDa. A part of the gene TTHA1605 encoding a 24.17 kDa protein was demonstrated to encode the mcl-PHA depolymerase of T. thermophilus. The primary amino-acid sequence of purified enzyme reveals similarity to all reported so far extracellular mcl-PHA depolymerases. The purified enzyme could hydrolyze mcl - PHAs and p-nitrophenyl (pNP) esters but not short chain length (scl) - PHAs. The optimum pH range was 7.5-9 and the optimum temperature was 70 °C for pNP-octanoate (pNPO) hydrolysis. The Km value for pNPO was 53.2 μM. The enzyme was strongly inhibited by phenylmethylsulfonyl fluoride (PMSF) and non-ionic detergents (Tween 20, Tween 80 and Triton X-100). The results demonstrated in this study revealed that the mcl-PHA depolymerase from T. thermophilus is a distinct enzyme, which is different from those of other mcl-PHA-degrading bacteria.     

Synthesis and characterization of high cis-polybutadiene: influence of monomer concentration and reaction temperature

This paper reports the study of the dependence of reaction conversion, catalyst activity, polymer microstructure, molecular weight, molecular weight distribution curves and Mooney viscosity on reaction temperature and monomer concentration in the reaction medium used in the synthesis of high cis-polybutadiene. A ternary catalyst system composed by neodymium versatate, trans-butyl chloride and diisobutylaluminum hydride was used in its synthesis. The highest molecular weights were obtained at polymerization temperatures in the range from 70 to 80 °C. The highest content of cis-1,4 repeating units (about 99%) was observed when the polymerization was carried out at the lowest initial monomer concentration (0.56 mol/l).     

Sesbania drummondii cell cultures: ICP-MS determination of the accumulation of Pb and Cu

Sesbania cell cultures grown in the presence of different concentrations of Pb (0-1000 mg/L) and Cu (0-500 mg/L) were assayed for growth, metal accumulations and activities of antioxidative enzymes: superoxide dismutase (SOD), catalase (CAT) and guaiacol peroxidase (GPX). These cultures tolerated Pb up to a concentration of 500 mg/L, registering a fresh weight growth of 500% in 3 weeks. At the same time, cultures registered a growth of 200% in 3 weeks at a Cu concentration of 100 mg/L showing less tolerance than Pb. However, Sesbania cells accumulated more Cu than Pb, as determined by ICP-MS, at all the treatments tested. Cu accumulation reached 3000 mg/kg (dry weight) at a Cu treatment of 100 mg/L, while Pb accumulation was only over 150 mg/kg (dry weight) at 500 mg Pb/L. Metal accumulations were positively correlated with induction of SOD and CAT activities in both the metal treatments. SOD activity of callus was 105 U/mg (fresh weight) at a Pb treatment of 500 mg/L and the corresponding Pb accumulation of 160 mg/kg (dry weight), while the activity rose to 300 U/mg (fresh weight) at a Cu treatment of 100 mg/L and the corresponding Cu accumulation of 3000 mg/kg (dry weight). The pattern of GPX activities was, however, different, particularly in Pb treatments where activities declined with increasing concentrations of Pb in the cells as well as growth medium. This study shows how Sesbania cells withstand heavy metal stress by induction of antioxidative enzyme activities.     

Thermal degradation behavior of poly(4-hydroxybutyric acid)

Thermal degradation behavior of poly(4-hydroxybutyric acid) (P(4HB)) was investigated by thermogravimetric and pyrolysis-gas chromatography mass spectrometric analyses under both isothermal and non-isothermal conditions. Based on the thermogravimetric analysis, it was found that two distinct processes occurred at temperatures below and above 350 °C during the non-isothermal degradation of P(4HB) samples depending on both the molecular weight and the heating rate. From ¹H NMR analysis of the residual P(4HB) molecules after isothermal degradations at different temperatures, it was confirmed that the ω-hydroxyl chain-end was remained unchanged in the residual P(4HB) molecules at temperatures below 300 °C, while the ω-chain-end of P(4HB) molecules was converted to 3-butenoyl units at temperatures above 300 °C. In contrast, the majority of the volatile products evolved during thermal degradation of P(4HB) was γ-butyrolactone regardless of the degradation temperature. From these results, it is concluded that during the thermal degradation of P(4HB), the selective formation of γ-butyrolactone via unzipping reaction from the ω-hydroxyl chain-end predominantly occurs at temperatures below 300 °C. At temperatures above 300 °C, both the cis-elimination reaction of 4HB unit and the formation of cyclic macromolecules of P(4HB) via intramolecular transesterification take place in addition to unzipping reaction from the ω-hydroxyl chain-end. Finally, the primary reaction of thermal degradation of P(4HB) at temperatures above 350 °C progresses by the cyclic rupture via intramolecular transesterification of P(4HB) molecules with a release of γ-butyrolactone as volatile product. Moreover, we carried out the thermal degradation tests for copolymer of 93 mol% of 4HB with 7 mol% of 3-hydroxybutyric acid (3HB) to examine the effect of 3HB units on thermal stability of P(4HB).     

Saccharonol B,a new cytotoxic methylated isocoumarin from Saccharomonospora azurea

From an antimicrobial gram-positive actinomycete strain of Saccharomonospora azurea (MTCC11714) isolated from high altitude soil of Kargil (J&K, India), a new isocoumarin saccharonol B (2) along with two known compounds viz. saccharonol A (1) and piericidin A₃ (3) was isolated and characterized. The structure of the new compound was established based on extensive 2D-NMR data. Saccharonol B (2) exhibited mild antimicrobial activity against a standard panel of microorganisms Staphylococcus aureus ATCC 29213, Candida albicans ATCC 90028, and Aspergillus fumigatus MTCC 1811 with MIC values in the range of 128–248 μg/mL. Saccharonol B (2) and piericidin A₃ (3) showed selective cytotoxic activity against human pancreatic carcinoma cell line (MIAPaCa-2) with IC₅₀ values of 9 and 8 μM, respectively. Mechanistic studies indicated that saccharonol B (2) arrests S-phase of the cell cycle and causes dose-dependent loss of mitochondrial potential in MIAPaCa-2 cells.     

Processing of a Strong Biodegradable Poly[(R)‐3‐hydroxybutyrate] Fiber and a New Fiber Structure Revealed by Micro‐Beam X‐Ray Diffraction with Synchrotron Radiation

Summary: Biodegradable poly[(R)‐3‐hydroxybutyrate] (P(3HB)) fibers with high tensile strength of 1.32 GPa were processed from ultra‐high‐molecular‐weight P(3HB) by a method combining cold‐drawing and two‐step‐drawing procedures at room temperature. The distribution of molecular structures in a mono‐filament was analyzed by micro‐beam X‐ray diffraction with synchrotron radiation. It was revealed that the P(3HB) fiber has a new core‐sheath structure consistent with two types of molecular conformations: a 2₁ helix conformation in the sheath region and a planar zigzag conformation in the core region.

P(3HB) fiber processed by cold‐drawing in ice water and two‐step drawing at room temperature, and subsequently annealing at 50 °C.