Protein-coated β-ferric hydrous oxide particles: An electrokinetic and electrooptic study

Using microelectrophoresis and electric light scattering techniques, we investigated the adsorption characteristics, surface coverage and surface electric parameters of superstructures from two isoforms of plastocyanin, PCa and PCb, in an oxidized state adsorbed on β-ferric hydrous oxide particles. The surface electric charge and electric dipole moments of the composite particles and the thickness of the protein adsorption layer are determined in a wide pH range, at different ionic strengths and concentration ratios of PC to β-FeOOH. The adsorption of the two proteins was found to shift the particles’ isoelectric point and to alter the total electric charge and the electric dipole moments of the oxide particles to different extent. A “reversal” in the direction of the permanent dipole moment is observed at lower pH for PCb- than for PCa-coated oxide particles. Strict correlation is found between the changes in the electrokinetic charge of the composite particles and the variation in their “permanent” dipole moments. Data suggest that the adsorption of the proteins is driven by electrostatic and/or hydrophobic interactions with the oxide surfaces dependent on pH. The adsorption behaviour is consistent with the involvement of the “eastern” and “northern” patches of the plastocyanin molecules in their adsorption on the oxide surfaces that are differently charged depending on pH.     

Monte Carlo simulations of antibody adsorption and orientation on charged surfaces

Monte Carlo simulations were performed to study the adsorption and orientation of antibodies on charged surfaces based on both colloidal and all-atom models. The colloidal model antibody consists of 12 connected beads representing the 12 domains of an antibody molecule. The structure of the all-atom antibody model was taken from the protein databank. The effects of the surface charge sign and density, the solution pH and ionic strength on the adsorption and orientation of different colloidal model antibodies with different dipole moments were examined. Simulation results show that both the 12-bead and the all-atom models of the antibody, for which the dipole moment points from the Fc to (Fab)2 fragments, tend to have the desired "end-on" orientation on positively charged surfaces and undesired "head-on" orientation on negatively charged surfaces at high surface charge density and low solution ionic strength where electrostatic interactions dominate. At low surface charge density and high solution ionic strength where van der Waals interactions dominate, 12-bead model antibodies tend to have "lying-flat" orientation on surfaces. The orientation of adsorbed antibodies results from the compromise between electrostatic and van der Waals interactions. The dipole moment of an antibody is an important factor for antibody orientation on charged surfaces when electrostatic interactions dominate. This charge-driven protein orientation hypothesis was verified by our simulations results in this work. It was further confirmed by surface plasmon resonance biosensor and time-of-flight secondary ion mass spectrometry experiments reported elsewhere.     

Electric parameters of photosystem II particles — electric light scattering study

Electric light scattering and microelectrophoresis were applied to investigate the electric moments (permanent dipole moment and electric polarizability and electrophoretic mobility of envelope-free chloroplasts and photosystem II (PS II particles. The effect of the removal of the extrinsic polypeptides (18, 24 and 33 kDa) on the electric moments was also studied. A significant difference was observed between the orientation behaviour of chloroplasts and PS II preparations. The data indicate that the permanent and induced dipole moments contribute to the orientation of the PS II particles, whereas chloroplasts possess induced dipole moment only.

NaCl and Tris treatments of PS II preparations influence both the transverse permanent dipole moment and the electric polarizability of PS II particles. The increase in the electrophoretic mobility of PS II particles on removal of the extrinsic proteins corresponds to an increase in the electric polarizability value, demonstrating its interfacial nature.     

Buffer-induced changes of purple membrane surface electric properties: an electro-optical study

Buffer-induced alteration of the purple membrane electric dipole moments and electrokinetic charge was studied by electric light scattering and microelectrophoresis. The permanent dipole moment and electrophoretic mobility of purple membranes change in opposite direction in presence of 'P'- and 'N'-type buffer molecules, shown to produce 'positive' and 'negative' additional components to the bR light-induced charge displacement current. It is concluded that the two types buffer molecules distribute differently on the membrane surfaces, depending on their protonation state, as a result of different interaction with the membrane cytoplasmic and extracellular surfaces.     

Electric dipole moments of magnetite colloidal particles in liquid dielectrics

The effects of alternating and pulsed fields on the electric birefringence in a colloided system of magnetite particles suspended in kerosene are studied. The permanent dipole moment is found to substantially influence the orientation of magnetite particles in alternating fields with frequencies of higher than 15 Hz. The mechanism for the generation of the permanent dipole moments in magnetite colloidal particles suspended in low-conductivity liquids is discussed.     

Influence of cation binding on the electro-optically determined electric moments of purple membranes

Analysis of the elect ro-optically determined permanent dipole moment and electric polarizability of purple membrane fragments reveals the complex nature of the membrane electric moments.The problem to distinguish between the contribution of the membrane structural charges (charged groups of the polypeptide chain and polar lipid headarouos), bound cations and the electric double layer structure deserves particular attention not only because of its importance for electro-optics but also in respect to the relation of the membrane surface electric properties to the membarans transport function.The removal of divalent cations (Ca²⁺ and Mg²⁺) bound to purple membrane in the native state induces a cat ion-free species or purple membrane (deionized - blue membrane) with drastically changed spectroscopic properties and function. The preseent paper summarizes our study on the electric moments of blue membrane and their changes during the blue to purple transition. We intended to provide an insight into the possible regulation of this reversible transition (purple-to-blue and blue-to-purple) through changes of the asymmetric charge distribution and the importance of the asymmetric interfacial charge distribution for the proton transfer in purple membranes.The changes in the electric moments (permanent and induced dipole moments) of purple membrane fragments upon di- and trivalent cations binding to cation-depleted purple membranes were studied by electric light scattering (rotational electrokinetics) in d.c. and a.c. electric fields, and by electric pulses with reversing polarity, the results show a recovery of the membrane charge asymmetry (permanent dipole moment) though not of the induced dipole moment.     

Oxide-dependent adsorption of a model membrane phospholipid, dipalmitoylphosphatidylcholine: bulk adsorption isotherms

The importance of substrate chemistry and structure on supported phospholipid bilayer design and functionality is only recently being recognized. Our goal is to investigate systematically the substrate-dependence of phospholipid adsorption with an emphasis on oxide surface chemistry and to determine the dominant controlling forces. We obtained bulk adsorption isotherms at 55 degrees C for dipalmitoylphosphatidylcholine (DPPC) at pH values of 5.0, 7.2, and 9.0 and at two ionic strengths with and without Ca(2+), on quartz (alpha-SiO(2)), rutile (alpha-TiO(2)), and corundum (alpha-Al(2)O(3)), which represent a wide a range of points of zero charge (PZC). Adsorption was strongly oxide- and pH-dependent. At pH 5.0, adsorption increased as quartz < rutile approximately corundum, while at pH 7.2 and 9.0, the trend was quartz approximately rutile < corundum. Adsorption decreased with increasing pH (increasing negative surface charge), although adsorption occurred even at pH > or = PZC of the oxides. These trends indicate that adsorption is controlled by attractive van der Waals forces and further modified by electrostatic interactions of oxide surface sites with the negatively charged phosphate ester (-R(PO(4)-)R'-) portion of the DPPC headgroup. Also, the maximum observed adsorption on negatively charged oxide surfaces corresponded to roughly two bilayers, whereas significantly higher adsorption of up to four bilayers occurred on positively charged surfaces. Calcium ions promote adsorption beyond a second bilayer, regardless of the sign of oxide surface charge. We develop a conceptual model for the structure of the electric double layer to explain these observations.     

Electrostatic interactions between amphoteric latex particles and proteins

The electrostatic interactions between amphoteric polymethyl methacrylate latex particles and proteins with different pI values were investigated. These latex particles possess a net positive charge at low pH, but they become negatively charged at high pH. The nature and degree of interactions between these polymer particles and proteins are primarily controlled by the electrostatic characteristics of the particles and proteins under the experimental conditions. The self-promoting adsorption process from the charge neutralization of latex particles by the proteins, which have the opposite net charge to that of the particles, leads to a rapid reduction in the zeta potential of the particles (in other words colloidal stability), and so strong flocculation occurs. On the other hand, the electrostatic repulsion forces between similarly charged latex particles and the proteins retard the adsorption of protein molecules onto the surfaces of the particles. Therefore, latex particles exhibit excellent colloidal stability over a wide range of protein concentrations. A transition from net negative charge to net positive charge, and vice versa (charge reversal), was observed when the particle surface charge density was not high enough to be predominant in the protein adsorption process.     

Dipole driven bonding schemes of quinonoid zwitterions on surfaces

The permanent dipole of quinonoid zwitterions changes significantly when the molecules adsorb on Ag(111) and Cu(111) surfaces. STM reveals that sub-monolayers of adsorbed molecules can exhibit parallel dipole alignment on Ag(111), in strong contrast with the antiparallel ordering prevailing in the crystalline state and retrieved on Cu(111) surfaces, which minimizes the dipoles electrostatic interaction energy. DFT shows that the rearrangement of electron density upon adsorption is a result of donation from the molecular HOMO to the surface, and back donation to the LUMO with a concomitant charge transfer that effectively reduces the overall charge dipole.     

Effect of phosphatidylglycerol depletion on the surface electric properties and the fluorescence emission of thylakoid membranes

To explore the possible effect of phosphatidylglycerol (PG) on the surface electric properties and chlorophyll fluorescence characteristics we used electric light scattering technique and 77 K chlorophyll fluorescence of thylakoid membranes from a cyanobacterium, Synechocystis PCC6803 (wild type) and its pgsA mutant defective in PG synthesis. We found a strong decrease in the permanent and induced electric dipole moments of the mutant thylakoids, following long-term PG depletion parallel with a decrease of the emission peak from PSI and an increase of the emission peak from PSII. Partial recovery of the electric state of thylakoid membranes was observed at re-addition of PG to the mutant cells depleted of PG for 21days. This change in the electric dipole moments is probably due to a decrease in PG content and progressive structural alterations in the macroorganization of the photosynthetic complexes induced by PG deprivation.

Our results suggest that the depletion of a lipid, which carries a negative charge, despite its small contribution to the overall lipid content, significantly perturbs the surface charge of the membranes. These changes are related with the chlorophyll fluorescence emission ratios of two photosystems and may partly explain our earlier results concerning the PG requirement for the function and assembly of photosystems I and II reaction centers.     

Adsorption of proteins onto charged surfaces: A Monte Carlo approach with explicit ions

A computer model has been developed to simulate the adsorption of proteins onto charged surfaces displaying an electric double layer. Coadsorption of ions onto the surface is included by means of explicit ions. Only electrostatic interactions are considered. Monte Carlo simulations in the canonical ensemble of the enzyme cutinase and 15 variants (modeled from the X-ray tertiary structure of the wild-type) were performed. Adsorption free energies for all variants were calculated by the thermodynamic integration method. Distributions of the electric moment and the vector pointing toward the protein active site and parallel to its central β-sheet were determined to elucidate the mean orientation of the protein with respect to the surface as a function of its distance from the surface. It was found that the free energy of adsorption varied linearly with the total charge of the protein, while the electric moment (dipole moment) had a second-order but significant effect. Though an increase of the electric moment generally resulted in a slightly increased affinity of the protein for the surface, close to the surface the mean force acting on the protein clearly varied linearly with the strength of the electric moment, such that a clear correlation between the latter and the protein orientation with respect to the surface could be established. Wild-type cutinase displayed the highest affinity for the charged surface amongst all proteins having the same total charge, even though it did not have the largest electric moment. © 1996 by John Wiley & Sons, Inc.     

Permanent electric dipole moments of four tryptamine conformers in the gas phase: a new diagnostic of structure and dynamics

Rotationally resolved electronic spectroscopy in the gas phase, in the absence and presence of an applied electric field, has been used to determine the charge distribution of a cross section of the energy landscape of tryptamine (TRA). We report the magnitude and direction of the permanent electric dipole moments of the four TRA conformers GPyout, GPyup, GPhup, and Antiup in their S0 and S1 electronic states. Each dipole moment is unique, providing a powerful new tool for the conformational analysis of biomolecules in the gas phase. A comparison of the results for the different conformers of TRA reveals that the position and orientation of the ethylamine side chain play a major role in determining both the permanent and induced electric dipole moments of the different species in both electronic states.     

Thermally induced polarizabilities and dipole moments of small tin clusters

We study the influence of thermal excitation on the electric susceptibilities for Sn(6) and Sn(7) clusters by molecular beam electric deflection and Monte-Carlo simulations in conjunction with quantum-chemical calculations. At low temperatures (40 K), no field-induced broadening of the Sn(6) and Sn(7) cluster beams are observed, in agreement with vanishing permanent electric dipole moments due to their centro-symmetrical ground states. The electric polarizabilities of Sn(6) and Sn(7), as inferred from the field-induced molecular beam deflection, are in good agreement with the quantum-chemical predictions. At elevated temperatures of 50-100 K, increased polarizabilities of about 2-3 ?(3) are obtained. Also, we found indications of a field-induced beam broadening which points to the existence of permanent dipole moments of about 0.01-0.02 D per atom at higher temperatures. These results cannot be explained by thermal excitations within a harmonic oscillator model, which would yield a temperature-independent polarizability and fluxional, but not permanent, dipole moments. We analyze this behavior by Monte-Carlo simulations in order to compute average temperature-induced electric dipole moments. For that purpose, we developed a novel technique for predicting observables sampled on the quantum-chemical potential energy surface by an umbrella sampling correction of Monte-Carlo results obtained from simulations utilizing an empirical potential. The calculated, fluxional dipole moments are in tune with the observed beam broadenings. The cluster dynamics underlying the polarizability appear to be intermediate between rigid and floppy molecules which leads to the conclusion that the rotational, not the vibrational temperature seems to be the key parameter that determines the temperature dependence of the polarizability.     

In-situ investigation of the adsorption of globular model proteins on stimuli-responsive binary polyelectrolyte brushes

Binary brushes constituted from two incompatible polymers can be used in the form of ultrathin polymeric layers as a versatile tool for surface engineering to tune physicochemical surface characteristics such as wettability, surface charge, chemical composition, and morphology and furthermore to create responsive surface properties. Mixed brushes of oppositely charged weak polyelectrolytes represent a special case of responding surfaces that are sensitive to changes in the pH value of the aqueous environment and therefore represent interesting tools for biosurface engineering. The polyelectrolyte brushes used for this study were composed of two oppositely charged polyelelctrolytes poly(2-vinylpyridine) (P2VP) and poly(acrylic acid) (PAA). The in-situ properties and surface characteristics such as as surface charge, surface tension, and extent of swelling of these brush layers are functions of the pH value of the surrounding aqueous solution. To test the behavior of the mixed polylelctrolyte brushes in contact with biosystems, protein adsorption experiments with globular model proteins were performed at different pH values and salt concentrations (confinement of counterions) of the buffer solutions. The influence of the pH value, buffer salt concentration, and isoelectric points (IEP) of the brush and protein on the adsorbed amount and the interfacial tension during protein adsorption as well as the protein adsorption mechanism postulated in reference to recently developed theories of protein adsorption on polyelectrolyte brushes is discussed. In the salted regime, protein adsorption was found to be similar to the often-described adsorption at hydrophobic surfaces. However, in the osmotic regime the balance of electrostatic repulsion and a strong entropic driving force, "counterion release", was found to be the main influence on protein adsorption.     

Steady electro-optic characteristics of noninteracting colloidal particles

In previous papers on the electro-optic effects of beta-FeOOH particles we proposed a new procedure for analysis of the low frequency behavior of charged particles. The procedure is based on comparison of characteristic field intensity curves on an appropriate scale and helps to test the dependence of the slow effects on particle surface electric polarizability (relaxing in the kilohertz domain). The results stimulated us to test the applicability of the method to other samples and to reconsider the literature data on the electro-optic behavior of charged colloids in the hydrodynamic domain. The aim of the present paper is to demonstrate on a series of samples similar features of the electro-optic responses of charged particles in the relaxation interval of particle rotation. The analysis leads to a new hypothesis for explanation of the complicated low frequency behavior of charged particles. The superposition of two slow effects (linear and quadratic with field intensity), relaxing in the relaxation interval of particle rotation, can explain the complicated frequency curves in this domain. One of the slow effects is observed for all polarizable particles. It is of negative sign and displays the features of an induced dipole effect dependent on the "kilohertz" induced moment. It corresponds to a slow stage of the surface polarization process related to electrokinetic charge. The linear slow effect shows permanent dipole like behavior and appears only at certain ionic content of the medium. It shows no direct dependence on counterion mobility and on the "kilohertz" induced moment and is probably due to surface charge nonuniformity.     

Surface electric field manipulation of the adsorption kinetics and biocatalytic properties of cytochrome c on a 3D macroporous Au electrode

Upon adsorbing on a solid-state substrate, water-soluble proteins are prone to denaturation and deterioration of their functions due to the conformation change. The surface electric field of a conductive substrate is one of the important factors that influence the character of adsorbed proteins. In this work, a 3D macroporous gold electrode has been prepared and served as the working electrode to study the influence of surface electric field on the adsorption kinetics and conformation of the adsorbed cytochrome c (cyt-c) with the help of electrochemical, in situ electrochemical IR spectroscopic, atomic force microscopic, and contact angle measurements. The external electric field creates excess surface charge which can manipulate the adsorption rate of proteins on the substrate by the enhanced electrostatic interactions between the electrode and protein patches by coupling with complementary charges. The amount of immobilized cyt-c with electrochemical activity on the 3D macroporous gold electrode showed a minimum at potential of zero charge (PZC) and it increased with increasing net excess surface charge. Higher electric field could influence the conformation and the corresponding properties such as direct electrochemistry, bioactivity, and surface character of the adsorbed cyt-c molecules. However, high external electric field leads to damage of the protein secondary structure. This study provides fundamentals for the fabrication of biomolecular devices, biosensors, and biofuel cells through electrostatic interactions. Figure Two cases are illustrated for the protein immobilized on electrode surfaces: a retention of protein structure under moderate excess surface charge, b denaturation and conformation change of proteins adsorbed at high excess surface charge, e.g., due to the higher external electric field.     

Interfacial and rheological properties of humic acid/hematite suspensions

This work deals with the effect of humic acid (HA) adsorption on the interfacial properties, the stability, and the rheology of aqueous iron oxide (hematite) suspensions. It is first of all demonstrated that HA effectively adsorbs onto hematite, mainly at acid pH. Since the charge of the HA chains is negative, it will be electrostatically attracted to the hematite surface below the point of zero charge of the particles, when they are positively charged. Electrophoresis measurements of hematite suspensions as a function of pH in the presence and absence of HA clearly demonstrate the adsorption of negatively charged entities on the oxide. Since the HA-covered particles can be thought of as "soft" colloids, Ohshima's theory was used to gain information on the surface potential and the charge density of the HA layer (H. Ohshima, in: A.V. Delgado (Ed.), Interfacial Electrokinetics and Electrophoresis, Dekker, New York, 2002, p. 123). A different procedure was also used to ascertain the degree of modification experienced by the hematite surface when placed in contact with HA solutions. The contact angles of selected liquids on pretreated hematite layers lead to the conclusion that the humic acid molecules impart to the particles a significant electron-donor character, in turn increasing their hydrophilicity. All this amount of information is used in the work for the interpretation of the rheological properties of hematite suspensions; the results are consistent with a stabilizing effect of HA adsorption on the suspensions, mainly as a consequence of the increased electrostatic repulsion between particles.     

Stability and electric parameters of AgJ-sols in the presence of a surface active substance

Summary The electric parameters (permanent dipole moment and electric polarizability) of Agj particles were determined at various concentrations of the surface active substance DDAO (dimethyldodecylamine oxide) by means of the electric birefringence. Information about the stability was obtained from the relaxation times of the particles deduced by the transient electric birefringence. The obtained results show that the minimal stability, which coincides with the investigations of Lyklema and de Keizer, appears at a concentration when the particles are not in the isoelectric point but when they have a maximum value of the permanent dipole moment and a minimum of the electric polarizability. This illustrates the importance of the particles' electric moments for a better understanding of the sot stability in the investigated system.

---

Zusammenfassung Es werden die elektrischen Parameter (permanentes Dipolmoment and elektrische Polarisierbarkeit) von AgJ-Teilchen bei verschiedenen Konzentrationen der oberflächenaktiven Substanz DDAO (Dimethyldodecylaminoxid) mit Hilfe der elektrooptischen Doppelbrechung bestimmt. Die Stabilität der Suspensionen wurde aus der Relaxationszeit der Teilchen nach Abschalten von Gleichspannungsimpulsen ermittelt. Die Ergebnisse zeigen, daß die geringste Stabilität, die mit Untersuchungen von Lyklema und de Keizer übereinstimmt, bei einer Konzentration auftritt, bei der die Teilchen nicht den isoelektrischen Punkt erreicht haben, sondern bei der sie ein Maximum des permanenten Dipolmoments und ein Minimum der elektrischen Polarisierbarkeit besitzen. Dies weist auf die Bedeutung der elektrischen Teilchenmomente für ein besseres Verständnis der Solstabilität in dem untersuchten System hin.

     

Understanding suspension rheology of anisotropically-charged platy minerals from direct interaction force measurement using AFM

Based on the classical DLVO (Derjaguin–Landau–Verwey–Overbeek) theory, the maximum coagulation of fine particle suspensions would be predicated to occur at the point of zero charge (pzc) of the particles. Although this prediction has been fairly accurate for isotropic particles, the mismatch has been frequently reported for suspensions of anisotropically-charged or charge-mosaic particles, such as talc. Followed by successful preparation of sufficiently smooth talc edge surfaces using the ultramicrotome method for the colloidal force measurements using atomic force microscope (AFM), the anisotropic surface charge properties, i.e., surface charge characteristics of basal planes and edge surfaces of talc at different pH values were determined by fitting the measured force profiles between the AFM tip and both basal plane and edge surfaces to the DLVO theory. The talc basal planes were found to carry a permanent negative charge, while the charge on its edge surfaces was highly pH-dependent. The AFM-derived surface (Stern) potential values of talc basal planes and edge surfaces enable us to calculate the interaction energy for various associations between different charge-mosaic surfaces. The attractive interaction between talc basal planes and edge surfaces was found to dominate the rheological behavior. This study clearly demonstrates the necessity of determining anisotropic surface charge characteristics to improve the understanding of rheological properties and hence to better control their process performance.