Effect of fullerene C60 branching center on the conformational properties of arms and the structure of star-shaped polystyrenes in solutions

The effect of the fullerene C₆₀ branching center on the structure and conformation of star-shaped polystyrenes with different arm lengths at equal concentrations in deuterotoluene (c = 1 g/dL) is studied by the method of small-angle neutron scattering. The analysis of neutron scattering for linear PS precursors and stars (the molecular masses of arms are ～7 × 10³ and ～4 × 10⁴) shows that the stars have ～6 arms that form a dense excluded-volume zone around a core inaccessible to other macromolecules. In low-molecular-mass stars (the molecular mass of the arm is ～7 × 10³), strengthening of the static rigidity of arms is observed; as a result, the size of arms increases relative to the size of free PS chains in a good solvent. At a greater length of arms (M ～ 4 × 10⁴), their individual properties are weakly pronounced in the correlation spectrum of the arm because of the interpenetration of arms, thereby demonstrating similarity in the structures of stars and their linear analogs. The mechanism controlling the effect of fullerene C₆₀ on the conformations of stars via solvent structuring by fullerene is discussed.     

Molecular and hydrodynamic characteristics of star-shaped polystyrenes with one or two fullerene (C<Subscript>60</Subscript>) molecules as a branching center

The molecular properties of regular star-shaped polystyrenes with different numbers of arms (6, 12, and 22) and different structures of the branching center (one or two covalently bonded fullerene C60 molecules) are studied by static light scattering; translational diffusion; and viscometry in toluene, THF, and chloroform. The lengths of the arms for the studied polymer stars are found to be the same. (The molecular mass of the arm is 8.1 × 10³.) The molecular mass and hydrodynamic sizes of macromolecules are estimated. It is shown that the conformational and hydrodynamic characteristics of polymer stars remain practically unchanged on passage from THF to chloroform. Compared to the linear analog, star-shaped fullerene-containing PSs are characterized by a higher density of the molecular coil. The shape of their macromolecules differs insignificantly from spherical, in consistence with theoretical predictions for polymer stars with relatively short arms.     

The impedance of the Ag-CeF<Subscript>3</Subscript>/CeF<Subscript>3</Subscript> bicrystal-Ag system

The impedance spectra of CeF₃/CeF₃ bicrystal (two single crystals separated by a single intercrystalline boundary) between Ag-electrodes are studied over a 135 to 410 K temperature interval (including temperatures below room temperature). The bicrystal was prepared by thermal-diffusion welding under a pressure of 1.5 × 10⁷ Pa at 1473 K in vacuum (∼10⁻² Pa). It is shown that the intercrystalline boundary affects but insignificantly the bicrystal bulk impedance. The CeF₃/CeF₃ ionic conductivity is 3 × 10⁻⁶ S/cm at 293 K; it is mainly determined by transfer processes in the single crystal bulk.     

Structural features of star-shaped fullerene (C60)-containing polystyrenes: Neutron scattering experiments

Structural features of star-shaped polyprotostyrene and polydeuterostyrene containing fullerene C₆₀ as a branching center have been studied by small-angle neutron scattering in benzene solutions. The results are compared with the corresponding characteristics of linear PSs, the molecular mass of which is equal to the molecular mass of one star arm in star-shaped macromolecules. The molecular masses of star-shaped polymers are estimated, and their branching center is shown to be hexafunctional. At relatively low concentrations of starshaped polymers in solutions, one can observe excluded volume effects, which are related by the presence of regions with higher densities at the center of a macromolecule. Using the Fourier transform of the scattering cross section, three-dimensional correlation functions are obtained, and the regular structure of stars is proved. Conclusions about the local correlations of units within one star arm and averaged correlations between units of neighboring arms within a given star are derived. An analysis of three-dimensional correlations shows that the centers of mass of all star arms are directed along orthogonal axes passing through the C₆₀ branching center of a star-shaped macromolecule.     

Structure and supramolecular structures of star-shaped fullerene-containing heteroarm polymers in deuterotoluene

Self-organization of star-shaped polymers containing six PS arms and six polar polymer arms on a common C₆₀ branching center is studied by means of small-angle neutron scattering in deuterotoluene. The results are compared with the corresponding characteristics of six-arm star-shaped fullerene-containing PSs. It is shown that the incorporation of additional polar arms into a six-arm macromolecule leads to its compression due to an increase in the degree of coiling of polar chains in the nonpolar solvent. In solution, heteroarm stars give rise to supramolecular structures in the form of clusters whose dimensions and density depend on the nature of the polar arms. Stars containing PS and poly(2-vinylpyridine) arms are weakly associated, and the mean number of particles in an associate is ∼1.3. Hybrid polymers containing PS and poly(tert-butyl methacrylate) arms demonstrate capability for mutual penetration that favors the appearance of large structures that have a diameter of ∼50 nm and that include up to 12 macromolecules. Hybrid stars containing PS and diblock copolymer (poly(2-vinylpyridine)-poly(tert-butyl methacrylate)) arms exhibit moderate self-organization that manifests itself in the formation of chain associates built from four macromolecules.     

Synthesis,structure, and electric properties of oxygen-deficient perovskites Ba<Subscript>3</Subscript>In<Subscript>2</Subscript>ZrO<Subscript>8</Subscript> and Ba<Subscript>4</Subscript>In<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>11</Subscript>

Perovskite phases Ba₃In₂ZrO₈ and Ba₄In₂Zr₂O₁₁ with the nominal concentration of structural oxygen vacancies 1/9 and 1/12, respectively, were synthesized by solid-phase and solution methods. X-ray diffraction showed cubic symmetry of both phases with the unit cell parameter a = 0.4193(2) and 0.4204(3) nm, respectively. The absence of superstructural lines resulted in the conclusion on statistical arrangement of oxygen vacancies. Thermogravimetry and mass spectrometry proved that both phases can reversibly absorb water from gas phase (pH₂O = 2 × 10⁻² atm) with observed correlation between the concentration of oxygen vacancies and amount of absorbed water. The total water amount was up to 0.9 mol per formula unit or, if recalculated for perovskite unit ABO₃, 0.3 and 0.23 mol H₂O, respectively. The temperature curves of coductivity in the atmosphere with various partial water vapor pressures (pH₂O = 3 × 10⁻⁵ and 2 × 10⁻² atm) showed significantly higher conductivity and lower activation energy (0.52 eV) in humid atmosphere due to proton transfer. The proton conductivity is up to 5 × 10⁻⁴ Ohm⁻¹ cm⁻¹ at 300°C for Ba₃In₂ZrO₈ specimen. IR spectrometry showed that protons in the structure exist primarily in OH-groups.     

Reaction of carotenoids with CCl<Subscript>3</Subscript>OO<Superscript>.</Superscript> by using pulse radiolysis

The interactions of carotenoids (bixin, β-carotene and lycopene) with CCl₃OO^. in aqueous and i-propylalcohol solution saturated with air have been studied by pulse radiolysis. For bixin and β-carotene reaction products from forming process, absorbing in the region of 650 nm, is observed with concomitant carotenoid bleaching (bixin at 500 nm, β-carotene at 450 nm). Their rate constants from forming process are 1.78 ×10⁸ and 7.8 ×10⁷ mol^-1 · L · s^-1 respectively. However, in the case of lycopene, no such a forming process of reaction as bixin and β-carotene can be observed although there is the bleaching reaction (rate constant 4 ×10⁷ mol^-1 · L · s^-1). The results suggest that the carotenoid radical cation and an additional radical are produced in the case of bixin and β-carotene, whereas lycopene undergoes electron transfer with CCl₃OO^., forming cation radical.     

Star‐shaped polymers by Ru(II)‐catalyzed living radical polymerization. II. Effective reaction conditions and characterization by multi‐angle laser light scattering/size exclusion chromatography and small‐angle X‐ray scattering

Star poly(methyl methacrylate)s (P*) of various arm lengths and core sizes were synthesized in high yields by the polymer linking reaction in Ru(II)‐catalyzed living radical polymerization. The yields of the star polymers were strongly dependent on the reaction conditions and increased under the following conditions: (1) at a higher overall concentration of arm chains ([P*]), (2) with a larger degree of polymerization (DP) of the arm chains (arm length), and (3) with a larger ratio (r) of linking agents to P* (core size). In particular, the yields sharply increased in a short time at a higher temperature, in a polar solution, and at a higher complex concentration after the addition of linking agents. These star polymers were then analyzed by multi‐angle laser light scattering to determine the weight‐average molecular weight (3.8 × 10³ to 1.5 × 10⁶), the number of arm chains per molecule (f = 4–63), and the radius of gyration (R_z = 2–22 nm), which also depended on the reaction conditions (e.g., f and R_z increased as [P*], DP, and r increased). Small‐angle X‐ray scattering analyses of the star polymers showed that they consisted of spheres for which the radius of the microgel core was 2.7 nm. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2245–2255, 2002     

Molecular modeling of hydration properties of hydrophobic ions Li<Superscript>+</Superscript>@C<Subscript>60</Subscript> and K<Superscript>+</Superscript>@C<Subscript>60</Subscript>

The Gibbs free energies of solvation (ΔG _s) and the electronic structures of endohedral metallofullerenes M⁺@C₆₀ (M⁺= Li⁺, K⁺) were calculated within the framework of the density functional theory and the polarizable continuum model. In water environment, the equilibrium position of K⁺ is at the center of the fullerene cavity whereas that of Li⁺ is shifted by 0.14 nm toward the fullerene cage. The Li⁺ cation is stabilized by interactions with both the fullerene and solvent. The equilibrium structures of both endohedral metallofullerenes are characterized by very close ΔG _s values. In particular, the calculated ΔG _s values for K⁺@C₆₀ are in the range from −124 to −149 kJ mol⁻¹ depending on the basis set and on the type of the density functional. Molecular dynamics simulations (TIP3P H₂O, OPLS force field, water sphere of radius 1.9 nm) showed that the radial distribution functions of water density around C₆₀ and M⁺@C₆₀ are very similar, whereas orientations of water dipoles around the endohedral metallofullerenes resemble the hydration pattern of isolated metal ions.     

Neutron Scattering Studies of Structure and Self-Assembly of Star-Shaped Polymers with Fullerene Centres in Solutions

Protonated star-shaped polystyrenes with single and double fullerene C₆₀ core and the hybrid stars with pairs of polar and non-polar arms (tertbuthylmetacrylate, polystyrene) have been studied in deuterated toluene (20 °C) by small-angle neutron scattering at low and moderate polymer concentrations (c₁ ∼ 1 g/dl, c₂ ∼ 3–6 g/dl) to evaluate the peculiarities of fullerene centre action on polymers self-assembly in solutions. As we found, the cores composed of two fullerenes, linked via Si(CH₃)₂-bridge, induce stars' anisotropic interactions and association into chain-like structures (correlation radius ∼400–600 nm). Meanwhile, the single-core stars of polystyrene and hybrids organize globular clusters (size ∼ 10³ nm) those geometry do not change significantly by polymer content variation.     

Determination of vitamin B<Subscript>1</Subscript> in seawater and microalgal fermentation media by high-performance liquid chromatography with fluorescence detection

A highly sensitive high-performance liquid chromatographic method with fluorescence detection has been developed for determination of vitamin B₁. Vitamin B₁ was converted into a fluorescent compound by treatment with hydrogen peroxide–horseradish peroxidase and the derivative was subsequently analyzed by HPLC on a Waters Spherisorb ODS2 column (250 mm×4.6 mm ID, 5 μm) with 40:60 methanol–pH 8.5 acetate buffer solution as mobile phase and fluorescence detection at 440 nm (with excitation at 375 nm). The calibration graph was linear from 5.00×10⁻¹⁰ mol L⁻¹ to 5.00×10⁻⁷ mol L⁻¹ for vitamin B₁ with a correlation coefficient of 0.9991 (n=9). The detection limit was 1.0×10⁻¹⁰ mol L⁻¹. The method was successfully used for determination of vitamin B₁ at pg mL⁻¹ levels in microalgal fermentation media and seawater after solid-phase extraction. Recovery was from 89 to 110% and the relative standard deviation was in the range 1.1 to 4.3%.     

Core‐shell nanoparticles with hyperbranched poly(arylene‐oxindole) interiors

Core‐shell type star polymers composed of poly(tert‐butyl acrylate) (poly(t‐BuA)) arms and 100% hyperbranched poly(arylene‐oxindole) interiors were synthesized via the “core‐first” method. Atom transfer radical polymerization of t‐BuA initiated by 2‐bromopropionyl terminal groups of the hyperbranched core was applied for the synthesis of the stars. The resultant star structures were characterized by gel permeation chromatography with triple detection. Polymers of molar masses M_n up to 1.68 × 10⁵ g/mol were obtained. The obtained star polymers compared with the linear counterparts of the same molar mass have a much more compact structure in solution. The intrinsic viscosities of the stars are also significantly lower than their linear counterparts. Light scattering experiments were performed to provide information about the size of these macromolecules in solution. Preliminary characterization of the thermal properties of these novel materials is also reported. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1120–1135, 2009     

Poly(styrene‐b‐isobutylene) multiarm star‐block copolymers

Multiarm star‐branched polymers based on poly(styrene‐b‐isobutylene) (PS‐PIB) block copolymer arms were synthesized under controlled/living cationic polymerization conditions using the 2‐chloro‐2‐propylbenzene (CCl)/TiCl₄/pyridine (Py) initiating system and divinylbenzene (DVB) as gel‐core‐forming comonomer. To optimize the timing of isobutylene (IB) addition to living PS⊕, the kinetics of styrene (St) polymerization at −80°C were measured in both 60 : 40 (v : v) methyl cyclohexane (MCHx) : MeCl and 60 : 40 hexane : MeCl cosolvents. For either cosolvent system, it was found that the polymerizations followed first‐order kinetics with respect to the monomer and the number of actively growing chains remained invariant. The rate of polymerization was slower in MCHx : MeCl (k_app = 2.5 × 10⁻³ s⁻¹) compared with hexane : MeCl (k_app = 5.6 × 10⁻³ s⁻¹) ([CCl]_o = [TiCl₄]/15 = 3.64 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M). Intermolecular alkylation reactions were observed at [St]_o = 0.93M but could be suppressed by avoiding very high St conversion and by setting [St]_o ≤ 0.35M. For St polymerization, k_app = 1.1 × 10⁻³ s⁻¹ ([CCl]_o = [TiCl₄]/15 = 1.82 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M); this was significantly higher than that observed for IB polymerization (k_app = 3.0 × 10⁻⁴ s⁻¹; [CCl]_o = [Py] = [TiCl₄]/15 = 1.86 × 10⁻³M; [IB]_o = 1.0M). Blocking efficiencies were higher in hexane : MeCl compared with MCHx : MeCl cosolvent system. Star formation was faster with PS‐PIB arms compared with PIB homopolymer arms under similar conditions. Using [DVB] = 5.6 × 10⁻²M = 10 times chain end concentration, 92% of PS‐PIB arms (M_n,PS = 2600 and M_n,PIB = 13,400 g/mol) were linked within 1 h at −80°C with negligible star–star coupling. It was difficult to achieve complete linking of all the arms prior to the onset of star–star coupling. Apparently, the presence of the St block allows the PS‐PIB block copolymer arms to be incorporated into growing star polymers by an additional mechanism, namely, electrophilic aromatic substitution (EAS), which leads to increased rates of star formation and greater tendency toward star–star coupling. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1629–1641, 1999     

Electron transfer through single-crystal silver electrode/<Emphasis Type="Italic">n</Emphasis>-decanthiol monolayer/NaNO<Subscript>3</Subscript> solution interfaces

The kinetics of Ru[(NH₃)₆]³⁺ reduction in 1 M NaNO₃ solution at Ag(210) and Ag(111) singlecrystal electrodes modified by n-decanthiol monolayer is studied by electrochemical impedance spectroscopy and cyclic voltammetry. By using these two methods, standard rate constants of the redox reaction involving Ru[(NH₃)₆]^3+/2+ redox couple in the absence and in the presence of the n-decanthiol film were estimated. The equivalent circuit describing the experimental data in the presence of the self-assembled organic monolayer and in the absence of redox reaction is an electrical circuit comprising a large resistance (∼10⁶ Ω) connected in parallel with a capacitance (∼10⁻⁸ F). Analysis of kinetic data and extrapolation of Tafel lines resulted in the determination of the rate constant at unmodified Ag-electrode, which is characteristic of very fast heterogeneous electron transfer. The calculated rate constants for n-decanthiol-modified silver singlecrystal faces (210) and (111) in 1 M NaNO₃ solution (pH 6.3) equal 4.63 × 10⁻⁵ and 3.05 × 10⁻⁵ cm/s, respectively. The results are compared with the data at hand reported by different authors for gold electrodes in indifferent electrolyte solution in the absence and in the presence of self-assembled monolayer.     

Enzyme biosensor based on the immobilization of HRP on SiO<Subscript>2</Subscript>/BSA/Au composite nanoparticles

In this work, an enzyme biosensor based on the immobilization of horseradish peroxidase (HRP) on SiO₂/BSA/Au/thionine/nafion-modified gold electrode was fabricated successfully. Firstly, nafion was dropped on the surface of the gold electrode to form a nafion film followed by chemisorption of thionine (Thi) as an electron mediator via the ion-exchange interaction between the Thi and nafion. Subsequently, the SiO₂/BSA/Au composite nanoparticles were assembled onto Thi film through the covalent bounding with the amino groups of Thi. Finally, HRP was immobilized on the SiO₂/BSA/Au composite nanoparticles due to the covalent conjugation to construct an enzyme biosensor. The surface topographies of the SiO₂/BSA/Au composite nanoparticles were investigated by using scanning electronic microscopy. The stepwise self-assemble procedure of the biosensor was further characterized by means of cyclic voltammetry and chronoamperometry. The enzyme biosensor showed high sensitivity, good stability and selectivity, a wide linear response to hydrogen peroxide (H₂O₂) in the range of 8.0 × 10^-6 ∼ 3.72 × 10^-3 mol/L, with a detection limit of 2.0 × 10^-6 mol/L. The Michaelies-Menten constant K_M^app K_M^{app} value was estimated to be 2.3 mM.     

Structural features of fullerene-containing star-shaped polystyrene molecules with Oligomer arms in solutions

The structure and conformational properties of star-shaped oligostyrenes containing fullerene C₆₀ as a branching center and short arms with lengths at the level of the persistent length or a segment of a polystyrene chain are studied by small-angle neutron scattering in deuterotoluene. The gyration radii of linear precursor oligomers (～0.4 and 0.6 nm) and corresponding star-shaped molecules (～1.1 and 1.4 nm) are calculated under the Guinier approximation. The linear oligomer (4–5 units) is found to be a rodlike molecule; arms of star-shaped molecules based on it assume the straightened conformations as well. Linear oligomer chains composed of 6–7 units deviate from the rodlike shape and acquire a certain flexibility in solution, but oligomer chains grafted onto the C₆₀ center preserve the extended conformations. There is no marked tendency toward screening of fullerene by radially extended arms. The number of branches in the star-shaped oligostyrenes corresponds to a functionality of f = 6 preset by the conditions of synthesis.     

Synthesis of highly dispersed super-refractory tantalum-zirconium carbide Ta<Subscript>4</Subscript>ZrC<Subscript>5</Subscript> and tantalum-hafnium carbide Ta<Subscript>4</Subscript>HfC<Subscript>5</Subscript> via sol-gel technology

Nanocrystalline powders of super-refractory complex carbides Ta₄HfC₅ and Ta₄ZrC₅ were synthesized using a hybrid method comprising sol-gel technology for preparing highly dispersed metal oxidescarbon starting mixtures and a relatively low-temperature (1300–1500°C) carbothermal synthesis under a dynamic vacuum (P = 1 × 10⁻³ to 1 × 10⁻⁵ MPa). The elemental and phase compositions of the products and average crystallite sizes were determined. TEM was used to study particle morphology and dispersion. Microstructures were observed by SEM. BET specific surface areas were determined for powders prepared at 1400°C.     

Aqueous sol–gel processing of precursor oxides for ZrW<Subscript>2</Subscript>O<Subscript>8</Subscript> synthesis

This paper describes the synthesis of ZrW₂O₈ by the use of an aqueous citrate-gel method in order to prepare a fine, pure and homogeneous oxide mixture suitable for ceramic processing. The thermal expansion coefficient thus obtained for α-ZrW₂O₈ is −10.6 × 10⁻⁶ °C⁻¹ (50–125 °C) whereas for the β-ZrW₂O₈ a value of −3.2 × 10⁻⁶ °C⁻¹ (200–300 °C) is obtained. The advantages of the use of a sol–gel method is expressed in the very homogeneous end-products. The paper describes crystallographic data, morphological structure and the thermal expansion properties of the ZrW₂O₈ material. Moreover, photoluminescence and photochromic properties specific to the precursor gel are described and analyzed. These effects support our views that the precursors show homogeneity up to nanometer level.     

Dilute solution properties of asymmetric six-arm star polystyrenes

Six-arm star polystyrenes having varying numbers of short and long arms attached to the same molecule have been synthesized by anionic polymerization. The molecules have been characterized by high resolution size exclusion chromatography using multiangle light scattering and viscosity detectors. This technique has allowed the radii of gyration and intrinsic viscosities to be measured for stars with each possible combination of arms. The branching parameters g and g′ are computed and compared with theoretical expectations. It is found that short arms add preferentially to the stars, because of reduced steric effects. The molecule with one long and five short arms exhibits behavior closest to that of a linear chain (largest branching ratios). The effect of arm polydispersity on solution properties of stars is discussed. © 1995 John Wiley & Sons, Inc.     

Synthesis of low polydispersity polybutadiene and polyethylene stars by convergent living anionic polymerization

Star‐shaped polybutadiene stars were synthesized by a convergent coupling of polybutadienyllithium with 4‐(chlorodimethylsilyl)styrene (CDMSS). CDMSS was added slowly and continuously to the living anionic chains until a stoichiometric equivalent was reached. Gel permeation chromatography‐multi‐angle laser light scattering (GPC‐MALLS) was used to determine the molecular weights and molecular weight distribution of the polybutadiene polymers. The number of arms incorporated into the star depended on the molecular weight of the initial chains and the rate of addition of the CDMSS. Low molecular weight polybutadiene arms (M_n = 640 g/mol) resulted in polybutadiene star polymers with an average of 12.6 arms, while higher molecular weight polybutadiene arms (M_n = 16,000 g/mol) resulted in polybutadiene star polymers with an average of 5.3 arms. The polybutadiene star polymers exhibited high 1,4‐polybutadiene microstructure (88.3–93.1%), and narrow molecular weight distributions (M_w/M_n = 1.11–1.20). Polybutadiene stars were subsequently hydrogenated by two methods, heterogeneous catalysis (catalytic hydrogenation using Pd/CaCO₃) or reaction with p‐toluenesulfonhydrazide (TSH), to transform the polybutadiene stars into polyethylene stars. The hydrogenation of the polybutadiene stars was found to be close to quantitative by ¹H NMR and FTIR spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 828–836, 2006