Polyelectrolyte Nanocomposite Membranes with Imidazole-Functionalized Multi-Walled Carbon Nanotubes for Use in Fuel Cell Applications

The preparation and characterization of a new type of nanocomposite polyelectrolyte membrane (PEM), based on Nafion® and imidazole modified multi-walled carbon nanotubes (MWCNT-Im), for direct methanol fuel cell (DMFC) applications is described. Related to the interactions between the protonated imidazole groups, grafted on the surface of multi-walled carbon nanotubes (MWCNT), and the negatively charged sulfonic acid groups of Nafion®, new electrostatic interactions can be formed in the interface of the Nafion® and MWCNT-Im which result in both lower methanol permeability and also higher proton conductivity. The physical characteristics of these manufactured nanocomposite membranes were investigated by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), water uptake, methanol permeability and ion exchange capacity, as well as proton conductivity. The Nafion®/MWCNT-Im membranes showed higher proton conductivity, lower methanol permeability and, as a consequence, a higher selectivity parameter in comparison to neat Nafion® or Nafion® containing –OH functionalized multi-walled carbon nanotubes (MWCNT-OH) membranes. The obtained results indicated that the Nafion®/MWCNT-Im membranes could be utilized as efficient polyelectrolyte membranes for direct methanol fuel cell applications.     

Polyelectrolyte Nanocomposite Membranes Using Imidazole-Functionalized Nanosilica for Fuel Cell Applications

The preparation and characterization of a new type of nanocomposite polyelectrolyte membrane, based on DuPont Nafion/imidazole-modified nanosilica (Im-Si), for direct methanol fuel cell applications is described. Related to the interactions between the protonated imidazole groups, grafted on the surface of nanosilica, and negatively charged sulfonic acid groups of Nafion, new electrostatic interactions can be formed in the interface of Nafion and Im-Si which result in both lower methanol permeability and also higher proton conductivity. Physical characteristics of these manufactured nanocomposite membranes were investigated by scanning electron microscopy, thermogravimetry analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, water uptake, methanol permeability, and ion-exchange capacity, as well as proton conductivity. The Nafion/Im-Si membranes showed higher proton conductivity, lower methanol permeability and, as a consequence, higher selectivity parameter in comparison to the neat Nafion or Nafion/silica membranes. The obtained results indicated that the Nafion/Im-Si membranes could be utilized as promising polyelectrolyte membranes for direct methanol fuel cell applications.     

Polyelectrolyte Nanocomposite Membranes,Based on Chitosan-phosphotungstic Acid Complex and Montmorillonite for Fuel Cells Applications

A polyelectrolyte complex (PEC) of chitosan and phosphotungstic acid (PWA) was prepared and characterized as a proton-conducting membrane for direct methanol fuel cell (DMFC) applications. Fourier transform infrared spectroscopy showed the presence of stable PWA in PEC. To reduce the methanol permeability, several amounts of montmorilonite (MMT) nanoclays (trade name: Cloisite Na) were introduced to the system. The X-ray diffraction patterns of nanocomposite membranes proved the nanoclay layers were exfoliated in the membranes at loading weights of MMT lower than 3 wt%. Proton conductivity and methanol permeability were measured. According to the selectivity parameter—ratio of proton conductivity to methanol permeability—PEC containing 2 wt% MMT (PEC/2 wt% MMT) was identified as the optimum composition. Finally, DMFC performance tests were investigated at 70°C and 5 M methanol feed and the optimum membrane showed higher maximum power density in comparison with Nafion 117. The results indicated the optimum nanocomposite membrane is a promising polyelectrolyte membrane (PEM) for DMFC applications.     

Improving the Performance of Nafion®-Based Fuel Cell Membranes by Introducing Histidine Functionalized Carbon Nanotubes

A new polymer nanocomposite membrane based on Nafion and functionalized carbon nanotubes (CNTs) was developed for proton exchange membrane fuel cell (PEMFC) applications. Histidine, an imidazole-based amino acid, was used for modifying the surface of CNTs. The modification of CNTs was characterized by means of Fourier transform infrared spectroscopy (FTIR) and their Zeta potential. The imidazole groups, due to forming and breaking of hydrogen bonding, can facilitate proton transport across the polymer matrix by the Grotthuss mechanism. The final structure of the Nafion/CNT nanocomposites was investigated by small angle X-ray scattering (SAXS). The results confirm that the transport properties of the fabricated new membranes were significantly improved in comparison with unmodified and conventional Nafion® membranes. The power density of the imidazole-CNT (Im-CNT) Nafion® composite membranes was about three times more than Nafion® membranes. Also, the experimental results showed that the proton conductivity for the conventional Nafion® membranes decreased over 100°C but the conductivity for the Nafion®/Im-CNT remained at a nearly constant value above 100°C up to 120°C. Thus, the nanocomposite based on Nafion/imidazole functionalized CNT can be considered as an anhydrous PEMFC membrane for high-temperature applications.     

Sulfonated Aromatic Polymers and Organically Modified Montmorillonite Nanocomposite Membranes for Fuel Cells Applications

Aromatic polymers, such as sulfonated poly(2,6-dimethyl-1,4-phenylene oxide) (SPPO), sulfonated poly(ether ether ketone) (SPEEK), and sulfonated poly(ether sulfone) (SPES), at the optimum degrees of sulfonation (DS), are suggested and evaluated as alternatives to Nafion for direct methanol fuel cells (DMFCs) applications. To reduce the methanol cross-over, which decreases the efficiency of the cell, organically modified montmorillonite nanoclays (OMMT) were added at 1 wt% to the sulfonated matrices with the optimum DS. The X-ray diffraction (XRD) patterns of nanocomposite membranes proved that the nanoclay layers were exfoliated. The proton conductivity and methanol permeability of the membranes, as well as the ion-exchange capacity (IEC), were measured. The selectivity parameter, ratio of proton conductivity to methanol permeability, was identified at 25°C for the nanocomposite membranes and the results were compared with Nafion117. Finally, the DMFC performance tests were investigated at 70°C and 5 M methanol feed for the manufactured nanocomposite polyelectrolyte membranes (PEMs). The SPEEK-based nanocomposite membrane showed the highest maximum power density in comparison with Nafion 117 and SPES and SPPO nanocomposite membranes. The results indicated that the nanocomposite membranes were promising PEMs for DMFC applications.     

Effect of solvent and crystal size on the selectivity of ZSM-5/Nafion composite membranes fabricated by solution-casting method

Zeolite/Nafion composite membranes with high proton selectivity were successfully fabricated using the solution-casting method. The types of zeolites are nano-sized and large sized Na-ZSM-5, H-ZSM-5, and their ball-milled ones. Two different schemes of experiments were conducted depending on the type of solvent. In case of using as-received Nafion® ionomer dispersions, the experimental results clearly show that the proton conductivity of zeolite composite membrane using either H-type or Na-type ZSM-5 depends on the type of solvent. It is thought that when propanol and water as the solvents were used, more hydrophilic H-type ZSM-5 seems to have been more randomly dispersed into hydrophobic region rather than hydrophilic ionic clustered channels within Nafion. Therefore, H-type ZSM-5 existing near hydrophobic region seems to provide additional path for proton migration but weakening the mechanical strength. These composite membranes show higher water uptake than commercial Nafion® 115, strongly suggesting better water retention ability of zeolite. The most interesting result is that the methanol permeability has decreased with increasing zeolite contents even when the proton conductivity increased, and the proton selectivities of these composite membranes expressed as characteristic factor were higher than that of Nafion® 115. In case of using a mixture of high boiling point DMF and ethanol as the solvent, unlike the previous case where no DMF was used, the proton conductivity slightly dropped with increasing zeolite contents. These results should have been attributed to a blocking effect of zeolite particles surrounded by inversely oriented hydrophilic micelles of Nafion. However, the values of proton conductivity of most composite membranes were significantly higher than that of Nafion® 115, and methanol permeability also decreased with increasing zeolite contents. The significantly lower methanol permeability of the composite membrane fabricated with DMF as the solvent is probably due to the more effective blocking effect of H-ZSM-5 for ionic clustered channels as well as difficult transport of methanol through zeolite pores.In case of the composite membranes containing ZSM-5 with large crystal size, it is found that the methanol permeability has increased considerably with the increasing of zeolite contents due to void fractions between polymer phases and zeolite particles. In case of using ball-milled ZSM-5 with small crystal size, however, the value of characteristic factor tends to increase with increasing zeolite contents. Consequently, it is seen that the characteristic factor of Zeolite/Nafion composite membranes was much higher than Nafion® 115. The results obtained throughout this study strongly suggest that zeolites with small crystal size and high hydrophilicity are very prospective for composite membrane for direct methanol fuel cells in the future.     

Preparation and Characterization of Nafion/Sulfonated SiO2 Molecular Sieve Composite Membranes

A Nafion/sulfonated SiO₂ molecular sieve composite membrane was prepared by solution casting with sulfonated SiO₂ molecular sieve as the modifier. The ATR/FT-IR results showed that sulfonated SiO₂ molecular sieve did not change the structure of the membrane. The SEM and XRD results showed that the molecular sieve was distributed uniformly in the membrane. The proton conductivity, methanol permeability, water content, and swelling degree were measured. Compared with Nafion membrane, the composite membrane had higher water content and proton conductivity and lower methanol permeability. The overall performance was the best when the content of sulfonated SiO₂ molecular sieve was 5 wt%. These results indicated that Nafion/sulfonated SiO₂ molecular sieve composite membranes would be excellent candidate membrane materials for direct methanol fuel cell (DMFC) applications.     

Improvement of the barrier properties of Nafion® by fluoro-modified montmorillonite

Montmorillonite (MMT) was modified by two types of cationic fluorosurfactants in order to improve compatibility with and dispersion within Nafion® membranes. Perfluoropolyether-containing cationic surfactant improved efficiency, by improving the barrier properties of Nafion® towards methanol. Moreover, the fluoro-modified MMT had no deleterious impact on the ionic conductivity of the membranes in contrast to conventional organo-modified MMT. The performances of a small size fuel cell were accordingly improved.     

Preparation and characterization of proton exchange membranes with through-membrane proton conducting channels

The primary goal of this study is to develop a novel PEMs with unique surface structure utilizing the high viscosity of the impregnation solution. SiO₂ nanofiber mats were prepared via the electrospinning method and introduced into sulfonated poly(ether sulfone) (SPES) matrix to prepare hybrid membrane. The effect of concentration of impregnation solution on the morphology and properties of the proton exchange membranes (PEMs), including thermal stability, water uptake, dimensional stability, proton conductivity, and methanol permeability were investigated. SEM results showed that a unique surface structure was prepared due to the high solution concentration. Moreover, the hydrophilic nanofibers on the surface constructed continuous proton pathways, which can enhance the proton conductivity of the membranes, a maximum proton conductivity of 0.125 S/cm was obtained when the SPES concentration was 40 wt% at 80 °C, and the conductivity was improved about 1.95 times compared to that of pure SPES membrane. The SiO₂ nanofiber mat-supported hybrid membrane could be used as PEMs for fuel cell applications.     

Novel nanocomposite membranes based on polybenzimidazole and Fe<Subscript>2</Subscript>TiO<Subscript>5</Subscript> nanoparticles for proton exchange membrane fuel cells

In this work, Fe₂TiO₅ nanoparticles were used for improving the proton conductivity, and water and acid uptake of polybenzimidazole (PBI)-based proton exchange membranes. The nanocomposite membranes have been prepared using different amounts of Fe₂TiO₅ nanoparticles and dispersed into a PBI membrane with the solution-casting method. The prepared membranes were then physico-chemically and electrochemically characterized for use as electrolytes in high-temperature PEMFCs. The PBI/Fe₂TiO₅ membranes (PFT) showed a higher acid uptake and proton conductivity compared with the pure PBI membranes. The highest acid uptake (156 %) and proton conductivity (78 mS/cm at 180 °C) were observed for the PBI nanocomposite membranes containing 4 wt% of Fe₂TiO₅ nanoparticles (PFT₄). The PFT₄ composite membrane showed 380 mW/cm² power density and 760 mA/cm² current density in 0.5 V at 180 °C at dry condition. The above results indicated that the PFT₄ nanocomposite membranes could be utilized as proton exchange membranes for high-temperature fuel cells.     

Influence of the carboxylic acid groups on the structure and properties of sulfonated poly(arylene ether nitrile) copolymer

A series of novel sulfonated poly(arylene ether nitrile) (SPEN) containing carboxylic acid group was successfully synthesized by direct aromatic nucleophilic substitution polycondensation of 2,6-difluorobenzonitrile (DFBN), potassium 2,5-dihydroxybenzenesulfonate (SHQ), phenolphthalin (PPL), and 4,4′-biphenol (BP). The expected chemical structure of copolymers was confirmed by using FTIR and ¹H NMR. To balance the performance for PEM applications, the proportion of four different components were controlled. The influences of the carboxylic acid groups on the structure and properties of SPEN, including thermal and mechanical properties, oxidative stability, water uptake, swelling, proton conductivity, and methanol permeability, were investigated in detail. The results revealed that SPEN membranes containing nitrile and carboxylic acid groups could lead low water absorption, swelling, and methanol penetration. In such a way, efficient proton transport channels were constructed by the formation of the hydrogen bonds. The proton conductivity of SPEN with high sulfonation degree (DS >?0.6) was higher than 0.05 S/cm and increased with increasing temperature. Especially, the conductivity of SPEN-0.6 and SPEN-0.7 reached up to 0.157 and 0.267 S/cm at 80 °C, respectively. Meanwhile, SPEN membranes exhibit low methanol permeability (0.13 ×?10^-6– 0.52 ×?10^-6 cm²·s^?1). Consequently, the highest selectivity of SPEN-0.6 reaches 2.02 ×?10⁵ S·cm^?3·s, which is about 4.5 times higher than that of Nafion 117 (0.45 ×?10⁵ S·cm^?3·s). All the data prove that this series of membranes exhibits excellent comprehensive performance and might have potential applications in direct methanol fuel cells.     

Direct methanol fuel cells : Methanol crossover and its influence on single DMFC performance

In the present investigation, the methanol crossover rate through Nafion®-115 membrane at different temperatures and different concentrations had been investigated in a fuel cell test apparatus by using gas chromatography analysis. The singledirect methanol fuel cell (DMFC) tests were carried out to investigate the effect of the concentration of methanol aqueous solutions and cell temperature on methanol crossover and consequently, on the open circuit voltage and the cell performance of DMFC. It can be found that the methanol crossover rate through Nafion® membrane increases as methanol concentration and temperature increase. It can also be found that methanol crossover presented a negative effect on the open circuit voltage and the single DMFC performance. Single DMFC test results showed that an improved cell performance was obtained as temperature increased although the methanol crossover rate increased with temperature increment.     

Characterization of nanohybrid membranes for direct methanol fuel cell applications

A series of sulfonated poly(2,6-dimethyl-1,4-phenylene oxide) (S-PPO) and sulfonated poly(ether ether ketone) (S-PEEK) at various sulfonation degrees were prepared and characterized for their degree of sulfonation, water uptake, ion exchange capacity, proton conductivity and methanol permeability. Based on the obtained results, the optimum samples were determined and subsequently blended together at different compositions. A single glass transition temperature (T_g) was determined for all blend samples, which was attributed to the presence of sulfonate groups on polymer backbones resulting in the formation of electrostatic cross-linking besides phenyl–phenyl interactions. Moreover, the molecular level of mixing in blends was verified through WAXS patterns. According to the membrane selectivity and hydrolytic stability measurements, 75 wt.% of S-PPO and 25 wt.% of S-PEEK was selected as the optimum composition. Afterwards, different amounts of an organically modified montmorillonite (MMT) were incorporated into the predetermined optimum composition matrices to reduce the methanol permeability of the resulted nanocomposite proton exchange membranes. The XRD patterns of nanocomposites revealed the exfoliated microstructure of the clay nanolayers in the polymeric matrices. Transport property measurements of nanohybrid membranes showed that the maximum selectivity parameter of 75 wt.% S-PPO/25 wt.% S-PEEK composition appeared in the presence of 1.5 wt.% of MMT, which is 1.53 times higher than the corresponding value for Nafion^® 117. The DMFC single cell test of the optimum nanohybrids membrane at 5 M methanol feed showed an open circuit voltage of 0.77 V and maximum power density of 135 mW cm^? 2 in comparison with 0.67 V and 108 mW cm^? 2 for Nafion^® 117, respectively. Fabricated nanohybrid membranes, thanks to their high selectivity, desirable transport properties and tenability, could be considered as promising polyelectrolytes for direct methanol fuel cell applications.     

Preparation and properties of crosslinked hybrid proton exchange membrane based on sulfonated poly (arylene ether nitrile) with improved selectivity for fuel cell application

Novel sulfonated poly (arylene ether nitrile) with pendant carboxylic group copolymers have been prepared as proton exchange membranes which were applied in direct methanol fuel cells (DMFCs). Compared with others, this work shows two main advantages: the crosslinked method is uncomplicated and the membranes were prepared via the hydroquinonesulfonic acid potassium salt (SHQ) as crosslinker mingled in sulfonated poly (arylene ether nitrile) (SPEN) to avoid the decrease of proton conductivity. The obtained crosslinked membranes exhibited improved dimensional stability; larger tensile strength than that of pure SPEN; and good thermal, mechanical properties. Furthermore, after crosslinking, the membranes had low methanol permeability values (0.78–3.4 × 10^?7 cm² s^?1) and displayed good proton conductivities in the range of 0.0328–0.0385 S·cm^?1 at room temperature. The sample of SPEN-SHQ-5 % showed highest selectivity value of 4.205 × 10⁵ S·s cm^?3, which was 11.9 times higher than that of Nafion 117. All of these results indicated that these membranes would be the potential candidates as proton exchange membranes (PEMs) in DMFCs.     

Pore-filling electrolyte membranes based on plasma-activated microporous PE matrices and sulfonated hydrogenated styrene butadiene block copolymer (SHSBS): Single cell test and impedance spectroscopy in symmetrical mode

In this research the performance of proton exchange membrane fuel cells (PEMFC's) was studied, using pore-filling electrolyte membranes based on plasma-activated microporous polyethylene (PE) matrices coated with sulfonated hydrogenated butadiene–styrene block copolymer (SHSBS). The voltage–current and power density curves were recorded under different experimental temperature and pressure conditions. In addition, an electrochemical study was completed by means of electrochemical impedance spectroscopy (EIS) in the symmetrical mode, adjusting the electrical response obtained to an equivalent circuit, which allows for isolation of the different processes occurring within the system. Two parameters were taken into account in the study: the membrane's proton transport or ion resistance (R₁) and its charge transfer resistance (R₂).The results obtained indicate that SHSBS shows a single cell behaviour which is comparable to that of the commercial membrane Nafion®. In contrast, the performance of the PE–SHSBS pore-filling electrolyte membranes was lower than that of Nafion®. Likewise it was found that the different plasma treatments applied to the microporous PE matrix have an effect on the proton exchange capacity of the pore-filling electrolyte membrane. EIS allowed to determine the ion resistance of the proton exchange membrane, and it was demonstrated that the kinetics of the cathodic reaction and the cathode itself are decisive elements in membrane performance and hence prime objectives to be optimized, when the reduction of the overvoltages is at stake, which are currently observed in the polarization curve at low and high power densities.     

Preparation of poly(vinyl phosphate-b-styrene) copolymers and its blend with PPO as proton exchange membrane for DMFC applications

Poly(vinyl phosphate-b-styrene) (poly(VPP-b-St)) block copolymers were prepared via consecutive telomerization of vinyl acetate (VAc), atom transfer radical polymerization (ATRP) with styrene, saponification, and phosphorylation with phosphorus oxychloride. The resulting block copolymers were characterized by FT-IR and pH titration. Then, the block copolymers were blended with poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) to prepare direct methanol fuel cell (DMFC) membrane. The performance of poly(VPP-b-St)/PPO blend membranes was measured in terms of proton conductivity, methanol permeability, thermal and hydrolytic stability. The proton conductivities were in the range of 10^− 4 to 10^− 2 S/cm (60 °C, RH = 95%); the methanol permeabilities were in the range of 4.14 × 10^− 8 to 9.62 × 10^− 8 cm²/s (25 °C), and quite lower than that of Nafion® 117. Also, the thermal stability of the blend membranes was characterized by TGA, and was stable up to 400 °C; the blend membranes had better hydrolytic stability.     

Zirconium phosphate Nafion® composites — a microstructure-based explanation of mechanical and conductivity properties

It is known that by addition of zirconium phosphate to perfluorinated sulfonic acid ionomers the proton conductivity of the resulting PFSA-ZP-composite decreases. Nevertheless, at high temperatures the stability and efficiency of the composite is greatly increased. In order to clarify these, at first sight, contradicting observations mechanical properties and conductivity of a PFSA ionomer (Nafion® 117) and PFSA-ZP-composites were examined under conditions similar to fuel cell application. Water sorption-isotherms were used to directly relate mechanical and electrical properties to the water content at 75 °C. The results point at a strong coulombic interaction between organic and inorganic phase which at the same time increases the stiffness and T_G by ionic crosslinking and decreases conductivity. The interaction is the more pronounced when the water activity is lower. A threshold of about three water molecules per sulfonic acid group was identified, above which a significant proton conductivity is achieved and, concurrently, most of the mechanical stiffening effect has vanished.     

Does power ultrasound affect Nafion® dispersions?

The effect of low frequency power ultrasound on Nafion® ionomer used for fabricating proton exchange membrane fuel cell (PEMFC) and water electrolyzer (PEMWE) catalyst inks was investigated. In this study, a series of Nafion® dispersions having three concentrations (10, 5, and 2.5% w/v) were studied under various irradiation durations (t_us), at fixed ultrasonic frequency (f = 42 kHz) and ultrasonic power (P > 2 W), under either controlled or unregulated bulk solution temperature conditions using a laboratory ultrasonic cleaning bath. Viscosity (η), thermal degradation, and glass transition temperature (T_g) for all Nafion® dispersion samples was measured and compared to untreated Nafion® samples. In our conditions, it was found that power ultrasound lowered the viscosity of all tested Nafion® dispersion samples; whilst thermogravimetric and differential scanning calorimetry analyses showed that for all ultrasonically irradiated samples, a negligible overall polymer degradation and no obvious change in T_g was observed under controlled and unregulated bulk temperature conditions. It was found that it is possible that acoustic cavitation causes depolymerisation followed by a polymerisation initiation step during ultrasonication. By comparing the ultrasonically treated and high-shear mixed samples, it was also observed that acoustic and hydrodynamic cavitation played an important role in the reduction of dispersion viscosity.     

Composites of Proton-Conducting Polymer Electrolyte Membrane in Direct Methanol Fuel Cells

Fuel cells are a replacement for the conventional energy resources. As early as 1839, William Grove discovered the basic operating principle of fuel cells by reversing water electrolysis to generate electricity from hydrogen and oxygen. A Direct Methanol Fuel Cell (DMFC) operates on liquid fuel, which is one of the exciting varieties of fuel cells. There are many problems with DMFCs such as the high cost of electrolyte membranes, high platinum loading, CO poisoning, fuel cross-over, and so on. In this review, research regarding the solution of these problems will be cited and discussed. The electrical performance (in respect to power density) of the composites for the Nafion® and other perfluorinated membranes in DMFC are evaluated. The effect of these modifications on various aspects, such as mobility of protons through the membrane, permeation of hydronium ions, and cross-over of methanol through the membrane leading to the negative potential, have previously been discussed. Therefore, the main focus of this review is on the effect of composites of Nafion® and non-fluorinated membranes on the DMFC performance.     

Preparation and characterization of zirconium sulfophenyl phosphate-doped sulfonated poly(phthalazinone ether sulfone) composite proton exchange membrane

Polymer composite membranes based on sulfonated poly(phthalazinone ether sulfone) (SPPES) and zirconium sulfophenyl phosphate (ZrSPP) were prepared. Three ZrSPP concentrations were used: 10, 20, and 30 wt%. The membranes were characterized by infrared spectroscopy (IR), X-ray diffraction spectroscopy, thermal gravimetric analysis, and scanning electron microscopy (SEM). The IR results indicated the formation of intense hydrogen bonds between ZrSPP and SPPES molecules. The SEM micrographs showed that ZrSPP well dispersed with SPPES and form a lattice structure. The proton conductivity of the SPPES (degree of sulfonation (DS) 64 %)/ZrSPP (10 wt%) composite membrane reached 0.39 S/cm at 120 °C 100 % relative humidity and that of the 30 wt% of SPPES (DS 16.1 %)/ZrSPP composite membrane reached 0.18 S/cm at 150 °C. The methanol permeabilities of the SPPES/ZrSPP composite membranes were in the range of 2.1?×?10^?8 to 0.13?×?10^?8?cm²/s, much lower than that of Nafion®117 (10^?6?cm²/s). The composite membranes exhibited good thermal stabilities, proton conductivities, and good methanol resistance properties.