共查询到20条相似文献,搜索用时 10 毫秒
1.
《Journal of Macromolecular Science: Physics》2013,52(3-4):875-888
Amorphous poly(l-lactide) (PLLA) was annealed in two different ways: amorphous samples were heated at a given temperature to induce crystallization (one-step annealing); and amorphous samples were first crystallized at a low temperature and subsequently annealed at a higher temperature than the crystallization temperature. Samples thus prepared were measured by DSC. The original amorphous sample exhibited an exothermic peak at about 100°C (exothermic peak I), an exothermic peak just below the melting point (exothermic peak II), and an endothermic peak when it was melted. Exothermic peak I was caused by cold crystallization. When the melting points of PLLA samples, heat-treated in various ways, were plotted as a function of annealing temperature, there was discontinuity at about 120°C. From analyses of wide-angle X-ray diffraction patterns, it was found that when amorphous PLLA was crystallized at a temperature below 120°C, crystallites of the β-form formed, and when annealed at a temperature above 120°C, crystallites of the α-form grew. Thus, exothermic peak I was attributed to cold crystallization of the β-form, and peak II was caused by the phase transition of the β-form to a more stable form. 相似文献
2.
An aliphatic multiamide derivative derived from 1H-benzotriazole, N, N'-bis(1H-benzotriazole) sebacic acid acethydrazide (SA), was synthesized to evaluate its effect on the thermal performance, including non-isothermal crystallization and melting behavior as well as thermal stability, of poly(l-lactic acid) (PLLA). The comparative study, by means of DSC measurements, showed that the incorporation of SA caused a non-isothermal crystallization peak to appear and become sharp, showing its advanced crystallization promoting effect for PLLA. The non-isothermal crystallization results further indicated that 2 wt% SA was the saturation concentration for PLLA crystallization, and that the cooling rate was also a crucial determinant for PLLA crystallization. Considering the melting behavior, the difference between the virgin PLLA and PLLA/2%SA further confirmed the crystallization accelerative effect of SA for PLLA, with the increase of crystallization temperature in the temperature zone from 90 to 130°C being beneficial to the crystallization of PLLA during processing. Compared to the virgin PLLA, the trends of thermal decomposition curves were similar, suggesting that the introduction of SA of 0.5–3 wt% did not significantly change the thermal decomposition behavior of PLLA. 相似文献
3.
Yan-Hua Cai Yan-Hua Zhang Li-Ping Ren 《Journal of Macromolecular Science: Physics》2016,55(5):547-558
Cobalt(II)-hexamethylenetetramine (Co(II)-HMTA) complex was prepared using jet milling. Elemental analysis and thermogravimetric analysis confirmed that the structure of the Co(II)-HMTA complex was Co(HMTA)2Cl2·6H2O (LG). The influence of LG on the thermal performance of poly(l-lactic acid) (PLLA) was investigated. Isothermal crystallization behavior and X-ray diffraction analysis (XRD) results of PLLA/LG showed that LG could improve the crystallization performance of PLLA; 1% LG caused the half time of overall crystallization (t1/2) of PLLA to decrease from 96.5 min to a minimum value 3.8 min at 100°C. However, the isothermal crystallization kinetics of PLLA/LG described using the Avrami equation and XRD analysis indicated that the isothermal crystallization temperature and the LG concentration significantly affected the isothermal crystallization process of PLLA. In particular, 0.3% LG caused the intensity of the X-ray crystal diffraction peaks of PLLA to decrease with an increase of isothermal crystallization time after increasing for the first 5 min. The thermal decomposition analysis of PLLA/LG showed that the onset decomposition temperature of PLLA with a small amount of LG was higher than that of the neat PLLA and PLLA with a high concentration LG. 相似文献
4.
The effect of blend composition on crystallization morphology and behavior of a crystalline/crystalline blend, poly(l-lactic acid) (PLLA)/poly(ethylene oxide) (PEO), during slow, non-isothermal crystallization was studied by polarized light microscopy (PLM) connected with a hot-stage and differential scanning calorimetry (DSC). The results showed that all of the PLLA/PEO blends produced spherulites which gradually became bigger and looser, as well as coarser, with the increment of the PEO content, indicating that the PEO crystals was resided in the interlamellar or interfibrillar (between clusters of commonly oriented lamellae) regions of the PLLA spherulites. In the (25/75) and (10/90) blends, the nucleation and growth processes of the PEO spherulites could be clearly observed in the pre-existing PLLA spherulites. The onset crystallization temperature and the melting point of one component decreased with increasing the content of the other one owing to the good miscibility of the two components in the non-crystalline state and the interaction between their macromolecules, indicating that the crystallization of each component was influenced by the other one. 相似文献
5.
The molecular dynamics of poly(L-lactide) (PLLA) biopolymer was characterized through analyses of 1H and 2H NMR line-shapes and spin-lattice relaxation times at different temperatures. At low temperatures (e.g. 90 K), the methyl group rotation is dominant leading to a significant reduction in the proton second moment. Fast methyl group reorientation occurs at ca. 130 K. In additional to the fast methyl group rotation, hydroxyl groups start to reorient as the temperature increases further, eventually leading to the breakdown of the segments of the biopolymer chains above its glass transition temperature Tg of 323 K. The analyses of the 2H NMR line-shapes indicate that both the methyl and hydroxyl reorientations can be described by the so-called cone model, in which the former has three equilibrium positions with theta(C-D) = 70.5 degrees and phi = 120 degrees while the latter one exhibits two equilibrium positions with theta(O-D) = 78 degrees and phi = 180 degrees . 相似文献
6.
Hong Xu Minghua Luo Cuiqing Teng Si Xie 《Journal of Macromolecular Science: Physics》2013,52(4):681-687
Melt solid polycondensation is an approach to increase the molecular weight of poly (L‐lactic acid) (PLLA). For this report, the effect of crystallization time of PLLA prepolymer on the molecular weight of the biomaterial was studied. In this process, PLLA prepolymer with a molecular weight of 18,000 was first prepared by the ordinary melt‐polycondensation process. The prepolymer was crystallized at 105°C for various times, and then heated at 135°C for 15–50 h for further solid state polycondensation (SSP). The differential scanning calorimetry (DSC) and viscosity measurements were used to characterize the crystalline properties and molecular weight of the resulting PLLA polymers, respectively. The results showed that the molecular weight of PLLA reached a maximum value under the condition of a crystallization time of 30 min and SSP of 35 h. 相似文献
7.
A new method to determine tropisetron hydrochloride with l-tryptophan in the medium with pH=9.0 was studied, which is based on the fluorescence quenching effect of tropisetron hydrochloride on l-tryptophan. The fluorescence quenching mechanism and various factors influencing fluorescence quenching were discussed. Under the optimum conditions, the linear range and detection limit were 0.03-12.0 and 0.01 μg/mL (correlation coefficient r=0.9970), respectively. The calibration curve equation was ΔF=6.17+12.56 C (μg/mL). RSD was 3.4% (c=4.0 μg/mL, n=5); the detection limit estimated (S/N=3) was 0.01 μg/mL. The proposed method had been successfully applied to determine tropisetron hydrochloride in real samples and the obtained results were in good agreement with the results of the official method. 相似文献
8.
Recep B?y?k 《Physica B: Condensed Matter》2009,404(20):3483-3486
VO2+ doped l-alanine (C3H7NO2) single crystals and powders are examined by electron paramagnetic resonance (EPR) and optical absorption spectroscopy. Three magnetically different sites are resolved from angular variations of l-alanine single crystal EPR spectra. In some specific orientations each VO2+ line splits into three superhyperfine lines with intensities of 1:2:1 and maximum splitting value of 2.23 mT. The local symmetries of VO2+ complex sites are nearly axial. The optical absorption spectra show three bands. Spin Hamiltonian parameters are measured and molecular orbital coefficients are calculated by correlating EPR and optical absorption data for the central vanadyl ion. 相似文献
9.
Isaac C. Sanchez 《Journal of Macromolecular Science: Physics》2013,52(3):565-589
A generalized version of the lattice fluid theory of solutions is considered. Necessary and sufficient conditions for phase stability in a binary mixture are defined by a spinodal inequality. From the general properties of the spinodal, the necessary conditions for polymer/polymer miscibility and bimodal behavior of the spinodal are defined. A general theory of interfacial tension in phase separated multi-component mixtures is formulated. The interfacial tension theory can be combined with lattice fluid theory to obtain a unified theory of bulk and interfacial properties. 相似文献
10.
Xu Chun Song Yi Fan Zheng Rong Ma Hao Yong Yin 《Journal of Macromolecular Science: Physics》2013,52(6):1080-1088
Poly(3-chlorothiophene) (PCT) was electrochemically polymerized on the surface of tungsten oxide (WO3) in the ionic liquid 1-butyl-3-metyllimidazolium hexafluorophosphate by a potentiodynamic method. The PCT/WO3 films were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, and energy-dispersive X-ray analysis. Cyclic voltammetric experiment results showed that the electrochemical activity of the PCT/WO3 composite film was significantly improved due to the contribution of unique structure and interactions between PCT and WO3. 相似文献
11.
The isothermal crystallization of poly(L‐lactide) (PLLA) under steady‐shear flow was investigated in situ using an optical polarizing microscope with a hot shear stage. The steady–shear‐induced crystalline morphology of PLLA, to a great degree, depends on the crystallization temperature. There is a critical temperature, 120°C, below which shear‐induced row nuclei enhance nucleation ability, leading to the improvement of crystallinity, and above which cylindrite structure is generated. Their numbers increase and size reduces with temperature owing to the better movement and relaxation behavior of chains in the presence of shear flow. The results of 2D wide‐angle x‐ray diffraction (WAXD), showing the oriented structure at high T c , and differential scanning calorimetry (DSC), detecting the rising of T m with increasing T c , well confirm the effect of T c on the crystallization of PLLA under shear flow. 相似文献
12.
G. Colomer 《Journal of Quantitative Spectroscopy & Radiative Transfer》2007,107(1):30-46
The coupling between non-gray radiation heat transfer and convection-conduction heat transfer is studied. The spectral line weighted sum of gray gases model (slw) is used to account for non-gray radiation properties. The aim of this work is to analyze the influence of the different approaches used when calculating the parameters of the slw model. Such strategies include the use of optimized model coefficients to reduce the number of operations, and the interpolation of the distribution function instead of the use of mathematical correlations. Non-gray calculations are also compared to gray solutions using the Planck mean absorption coefficient, which can be also calculated with the slw model. The radiative transfer equation (rte) is solved by means of the discrete ordinates method (dom). A natural convection driven cavity is chosen to couple radiation and conduction-convection energy transfer. Several cases, with a significant variation of the ratio between radiation to convection heat transfer, as well as the ratio between radiation to conduction heat transfer, are discussed. 相似文献
13.
Zhihua Zhou 《Journal of Macromolecular Science: Physics》2013,52(6):1247-1254
The influences of thermal treatment on cold crystallization and the thermal behavior of poly‐L‐lactide (PLLA) were investigated by DSC and polarizing microscopy. Both the cooling and heating rates had effects on cold crystallization. Double peaks were observed for the samples on subsequently heating at 10°C min?1 after cooling between 5 and 20°C min?1. The degrees of crystallinity dramatically increased with decreasing cooling rate, and the size of PLLA spherulites increased with a decrease in the cooling rate. Double cold crystallization peaks were also observed during heating traces at higher rates for this material after fast cooling (20°C min?1) from the melt. The competition between the crystallization from the nuclei formed during cooling, and that from spontaneous nucleation might be responsible for the appearance of double peaks. 相似文献
14.
d-cycloserine (CS) is transformed into cis-3, 6-bis(aminooxymethyl)-2, 5-piperazinedione (CS-dimer) in the solid state under a humid atmosphere. This dimerization process was followed by measuring the IR bands characteristic of CS and CS-dimer. The reaction was accelerated by the presence of increased water vapor. The X-ray analysis of CS monohydrate (CS · H2O) revealed that the CS molecules exist as a zwitter ion where the α-amino N atom is protonated and the amide N atom is deprotonated in the crystal. Participation of water molecules was suggested in the dimerization of CS. 相似文献
15.
Mengying Li 《Journal of luminescence》2010,130(10):1935-263
l-cysteine capped CdTe quantum dots (QDs) were prepared in aqueous solution by a simple and efficient method, showing many advantages such as short synthesis period, the broaden range of starting pH value and the wide fluorescence emission wavelength range. A novel purification process was designed to remove excess Cd2+ which has potential cytotoxicity for bio-analysis. Three-dimensional fluorescence charts of pre- and post-purification showed that the purified QDs were of better luminescent performance. The prepared QDs were of cubic crystal structure with an average size of 2-6 nm, which were characterized by XRD and HRTEM. It is confirmed by IR spectra that the l-cysteine ligands were conjugated with CdTe cores via covalent bond. The degenerate fluorescence of QDs can be self-recovered in the presence of l-cysteine without other processing steps. 相似文献
16.
《光谱学快报》2013,46(4-5):617-634
Abstract The complex formation between l‐histidine (HHis) and aluminum(III) ion in water solutions was studied by UV spectrophotometric and 27‐Al NMR measurements at 298 K. UV spectra were measured on solutions in which the total concentration of histidine was from 15.0 to 50.0 mmol/dm3 and the concentration ratio of histidine to aluminum was varied from 3∶1 to 10∶1 in the pH range between 4.2 and 6.0. The spectra were taken in the wavelength interval 240–340 nm. Nonlinear least‐squares treatment of the spectrophotometric data indicates the formation of the complexes Al(HHis)3+, Al(His)2+, Al(HHis)His2+, and Al2(OH)His4+ with the overall formation constants βp,q,r: log β1,1,1=11.90±0.04, log β1,1,0=7.25±0.08, log β1,2,1=20.1±0.1, and log β2,1,1=5.92±0.12 (p, q, r are stoichiometric indices for metal, ligand, and proton, respectively). 27Al‐NMR spectra were taken on solutions with the concentration of aluminum 50 mmol/dm3 and that of histidine 250 mmol/dm3. In the pH interval 5.0–6.1, two resonances at 9.5 ppm and 12.0 ppm were assigned to Al(HHis)2+ and Al(HHis)(His)2+ (or Al(OH)(HHis)2 2+), respectively. 相似文献
17.
Elzbieta Winnicka Pawel Da¸browski Tomasz Winek 《Isotopes in environmental and health studies》2013,49(2):225-232
The kinetic and solvent deuterium isotope effects in the 4- and 5-positions of the indole ring on the enzymatic decomposition of l-tryptophan catalysed by the enzyme TPase (EC. 4.1.99.1) were determined. The isotope effects were investigated by the non-competitive method using [4′-2H]-l-tryptophan, which was enriched in deuterium in 70% in the 4-position. The numerical values of isotope effects for 100% enrichment in deuterated label in that position were calculated by approximation. Those same isotope effects were determined for [5′-2H]-l-tryptophan fully deuteriated in the 5′ -position. 相似文献
18.
Seddique M. Ahmed 《光谱学快报》2013,46(5):212-220
ABSTRACT Mechanistic investigation of the oxidative degradation of d-fructose (D-Fruc) has been studied by spectrophotometric technique. Molecular mechanics (MM +) calculations suggest that the potential energy (PE/kcal mol?1) of the d-fruc (opening structure) is at least three (3.71) times more stable than the PE of the cycling structure of the same matrix. The oxidation constant (K ox) of the anionic form of the d-Fruc (Fruc-NaOH) is about seven times greater than that of the protonated form (Fruc-H2SO4). Therefore, the anionic form is more highly oxidizable than is the cationic form of this matrix. The limit of detection can be as low as 18 ppm (mg L?1) of d-Fruc. This is about 60 times lower than the blood sugar level (BSL) or 100 times lower than that reported previously. The proposed procedure was applied successfully for the oxidation of D-Fruc in uni-fructose powder. The anionic form of D-Fruc (Fruc-NaOH) has the ability to store energy about 744.72 kJ g?1 h at 608 nm in a condensed lightweight form. Kinetic parameters of the oxidative degradation of the anionic form of D-Fruc at different concentration were deduced. A number of models were used to evaluate the kinetic parameters. The mechanism of the degradation of D-Fruc is explained on the basis of kinetic parameters. 相似文献
19.
Self-assembled monolayers represent well-defined systems that is a good model surface to study the effect of primary ion beams used in secondary ion mass spectrometry. The effect of polyatomic primary beams on both aliphatic and aromatic self-assembled monolayers has been studied. In particular, we analysed the variation of the relative secondary ion yield of both substrate metal-cluster (Aun−) in comparison with the molecular ions (M−) and clusters (MxAuy−) by using Bi+, Bi3+, Bi5+ beams. Moreover, the differences in the secondary ion generation efficiency are discussed. The main effect of the cluster beams is related to an increased formation of low-mass fragments and to the enhancement of the substrate related gold-clusters. The results show that, at variance of many other cases, the static SIMS of self-assembled monolayers does not benefit of the use of polyatomic primary ions. 相似文献
20.
A promising application of the multivariate curve resolution based on alternating least squares (MCR-ALS) method is reported for the analysis of the temperature-dependent conformational changes in poly(l-lysine) (PLL). The MCR-ALS approach has enabled detection of three structural components developed during the melting experiment. Most important is an infrared signature of the intermediate component described as a mixture of native α-helical conformation and its extended forms. 相似文献