Preferential Solvation of Ketoprofen in Some Co-solvent Binary Mixtures

The preferential solvation parameters of ketoprofen (KTP) in ethanol (EtOH) + water and propylene glycol (PG) + water binary solvent mixtures were obtained from their thermodynamic properties by means of the inverse Kirkwood–Buff integrals (IKBI) and quasi-lattice quasi-chemical methods. According to the IKBI method, it is found that KTP is very sensitive to specific solvation effects, so the preferential solvation parameter by co-solvents, δx _1,3, is negative in the water-rich mixtures of both binary systems but positive in the other compositions at temperatures of 293.15, 303.15 and 313.15 K. From this it can be assumed that, in water-rich mixtures, hydrophobic hydration around the aromatic rings and the methyl group, present in the drug, plays a relevant role in the solvation. The bigger amount of drug solvation by the co-solvent in mixtures of similar solvent proportions and in co-solvent-rich mixtures could be due mainly to polarity effects. Moreover, in these mixtures the solute will be acting as a Lewis acid with the co-solvent molecules, because they are more basic than water.     

Solute-solvent friction kernels and solution properties of methyl oxazoline-phenyl oxazoline (MeOx-PhOx) copolymers in binary ethanol-water mixtures

Solvent mixtures often alter the solubility of polymeric substances. Statistical copolymers made from 2-methyl-2-oxazoline (MeOx) and 2-phenyl-2-oxazoline (PhOx) are known for their varying solubilities in pure ethanol, pure water and in binary mixtures of ethanol-water. Constrained Molecular Dynamics (MD) simulations have been carried out with an aim to explain the varying solubilities of the statistical MeOx-PhOx copolymers. The solute-solvent dynamic friction kernels calculated through constrained MD simulations corroborate the solubility pattern in these copolymers. The solvation characteristics have been analyzed in terms of the solute-solvent radial distribution functions (RDFs). The ethanol-soluble MeOx-PhOx copolymers exhibit characteristic solute-composition dependence in the dynamic solute-solvent friction kernels, indicating the strength of the solute-solvent correlations. The aggressive solvation by the ethanol molecules in the binary solvent mixtures has been brought out by the O(solute)-H(ethanol) RDFs which exhibit a characteristic dependence on the ethanol content in the solvent composition. The corresponding O(solute)-H(water) RDFs are devoid of any such composition dependence. For all the MeOx-PhOx copolymers, the O-site solvation is strongly dominated by the water molecules and the N-sites are solvated equally by both ethanol and water molecules.     

Effect of Base–Acid Properties of Mixtures of Ethanol with Water on the Enthalpy of Solution of Cyclic Ethers in these Mixtures at <Emphasis Type="Italic">T</Emphasis> = 298.15 K

The enthalpies of solution of the cyclic ethers 1,4-dioxane, 12-crown-4 and 18-crown-6 in mixtures of ethanol and water have been measured within the whole mole fraction range at T = 298.15 K. The enthalpy of solvation has been calculated. In pure ethanol and pure water, the solvation enthalpy of the investigated cyclic ethers depends linearity on the number of –CH₂CH₂– groups in the cyclic ether molecules. Based on the analysis of the preferential solvation model proposed by Waghorne, it can be concluded that the 1,4-dioxane, 15C5 and 18C6 molecules are preferentially solvated by water molecules in the range of low water content in these mixtures. The effect of base–acid properties of ethanol–water mixtures on the enthalpy of solution of cyclic ethers in these mixtures has been analyzed. The enthalpy of solution of cyclic ethers correlates with the acidic properties of ethanol–water mixtures in the range of high and medium water content. The results presented are compared with analogous data obtained for the methanol–water and propan-1-ol–water mixtures.     

Solvation phenomena of a tetrapeptide in water/trifluoroethanol and water/ethanol mixtures: a diffusion NMR,intermolecular NOE,and molecular dynamics study

Solvation of a tetrapeptide, NAc-Ser-Phe-Val-Gly-OMe (1), in water and in water/alcohol mixtures with 2,2,2-trifluoroethanol (TFE)/water or ethanol (ETH)/water has been studied by diffusion NMR and intermolecular NOE measurements. The experimental results were compared with those obtained from detailed Molecular Dynamics (MD) calculations. Independently, all three methods revealed preferential solvation on the surface of the peptide by TFE in the water/TFE mixtures, but not by ETH in the water/ETH mixtures. The MD calculations show that the TFE concentration coating the peptide is higher than that in the bulk, while for ethanol, the concentration is nearly equal to that in the bulk. Calculated site-specific preferential solvation data between TFE, ETH, and water with the different peptide groups have been compared with the NMR data and shown to be in general agreement with the experimental facts.     

Preferential solvation of some antiepileptic drugs in {cosolvent (1) + water (2)} mixtures at 298.15 K

The solubility of lamotrigine (LTG), clonazepam (CZP) and diazepam (DZP) in some {cosolvent (1) + water (2)} mixtures expressed in mole fraction at 298.15 K was calculated from reported solubility values expressed in molarity by using the densities of the saturated solutions. Aqueous binary mixtures of ethanol, propylene glycol and N-methyl-2-pyrrolidone were considered. From mole fraction solubilities and some thermodynamic properties of the solvent mixtures, the preferential solvation of these drugs by both solvents in the mixtures was analysed by using the inverse Kirkwood–Buff integrals. It is observed that LTG, CZP and DZP are preferentially solvated by water in water-rich mixtures in all the three binary systems analysed. In {ethanol (1) + water (2)} mixtures, preferential solvation by water is also observed in ethanol-rich mixtures. Nevertheless, in {propylene glycol (1) + water (2)} and {N-methyl-2-pyrrolidone (1) + water (2)} mixtures preferential solvation by the cosolvent was observed in cosolvent-rich mixtures.     

Preferential solvation of phenol in binary solvent mixtures. A molecular dynamics study

Molecular dynamics computer simulations were carried out to study the preferential solvation of phenol in equimolar acetonitrile-water and ethanol-water binary mixtures. Two water models were used to investigate the model dependence of preferential solvation. The results are compared to recent intermolecular 1H NOESY experiments reported on the same systems. In the case of acetonitrile-water the local mole fraction obtained from simulations agrees quite well with experiments. In the case of ethanol-water there was a qualitative difference, which was observed for both water models. However, when comparing the degree of preferential solvation of the two cosolvents ethanol and acetonitrile with each of the two water models, the trend obtained from the simulations agrees with experimental data.     

Electronic spectroscopic study of solvation of a ketocyanine dye in ternary solvent mixtures

Solvation characteristics in ternary solvent mixtures have been studied by monitoring the solvent-sensitive electronic absorption band of a ketocyanine dye in two ternary solvent mixtures, water + ethanol + benzene and water + ethanol + cyclohexane, in which one of the pairs are partially miscible. Investigations have been done in a completely miscible region including the binodal curve. The maximum energy of absorption (E) of the solute in a ternary solvent mixture differs significantly from the mole fraction average of the E-values in the component solvents. Results in the corresponding binary solvent mixtures also show a deviation of the E-value from the mole fraction averaged E-values, indicating preferential solvation by a component solvent. The results in ternary solvent mixture have been explained in terms of a realistic model of solvation using the results on binary solvation.     

Surface tension of binary and two ternary mixtures containing water–acetonitrile–methanol/ethanol at 298.15 K: experimental data,correlation and prediction by various models

Surface tension of two ternary mixtures of water/acetonitrile/methanol and water/acetonitrile/ethanol, and their constituent binaries, were measured over the whole range of composition at 298.15 K and ambient pressure. The experimental data were used to calculate in the surface tension deviations (Δσ). The negative values of Δσ for the binary and ternary systems indicate the strong hydrogen bonding between unlike molecules of mixtures (particularly in the high concentration of water). Surface tension data of the binary systems were correlated with Fu et al., Wang–Chen, Redlich–Kister and Myers–Scott models. The mean standard deviation obtained from the comparison of experimental and calculated surface tension values for binary systems with four models is less than 0.42. Finally, the concentration dependence of the surface tension deviation of the ternary mixtures at 298.15 K was correlated using Pando et al. and Ku et al. models, with satisfactory results.     

Excess enthalpies of binary and ternary mixtures of acetonitrile with methanol,ethanol and benzene

Excess molar enthalpies are measured for the binary mixtures methanol—acetonitrile and ethanol—acetonitrile at 25 and 35°C and for the ternary mixtures methanol—acetonitrile—benzene and ethanol—acetonitrile—benzene at 25°C using an isothermal dilution calorimeter. The binary results are well reproduced with an association model which contains four equilibrium constants for the association of alcohol, two equilibrium constants for that of acetonitrile, and two solvation equilibrium constants between alcohol and acetonitrile molecules. The ternary results are compared with those calculated from the model with binary parameters.     

Preferential solvation of nifedipine in some aqueous co-solvent mixtures

Preferential solvation parameters of nifedipine (NIF) in ethanol (EtOH) + water and propylene glycol (PG) + water mixtures were obtained from their thermodynamic properties in solution using the inverse Kirkwood–Buff integrals. Preferential solvation parameter (δx_1,3) by both co-solvents is negative in the water-rich mixtures but positive in almost all the other compositions at 293.2, 303.2 and 313.2 K. Nevertheless, in EtOH-rich mixtures the values of δx_1,3 are also negative. It can be assumed that in water-rich mixtures the hydrophobic hydration around the non-polar groups of NIF plays a relevant role in the solvation. The higher drug solvation by co-solvent in mixtures of similar solvent proportions and in co-solvent-rich mixtures could be due mainly to polarity effects. Moreover, in these mixtures the drug could be acting as a Lewis acid with the co-solvents molecules. Finally, in EtOH-rich mixtures the drug could be acting as a Lewis base with water molecules.     

Permeabilite selective et solvatation preferentielle

Experimental data concerning the preferential solvation displayed by polyvinylpyrrolidone (PVP) dissolved in various mixed solvents are compared with the selectivity observed when a membrane, prepared by grafting vinylpyrrolidone into a thin film of polytetrafluoroethylene, is used to fractionate the same binary liquid mixtures by pervaporation. The investigation systems are:—ethanol/1,2- dichloroethane, ethanol/chloroform and acetic acid/1,2- dichloroethane. A close correlation is found between the two phenomena. The component which, in solution, is preferentially sorbed by polyvinylpyrrolidone, diffuses more readily through the PTFE-PVP membrane. When an inversion occurs, at a given concentration, in the preferential solvation, an inversion of selectivity is also observed in pervaporation at the same feed liquid composition.     

Thermosolvatochromism of betaine dyes revisited: theoretical calculations of the concentrations of alcohol-water hydrogen-bonded species and application to solvation in aqueous alcohols

Solvatochromic data of 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl)phenolate (RB) in aqueous methanol, 1-propanol, 2-propanol, and 2-methyl-2-propanol at 25 degrees C were recalculated by employing a recently introduced model that explicitly considers the presence of 1:1 alcohol-water hydrogen-bonded species, ROH-W, in bulk solution and their exchange equilibria with water and alcohol in the probe solvation microsphere. The thermosolvatochromic behavior of RB in aqueous ethanol was measured in the temperature range from 10 to 60 degrees C; the results thus obtained were treated according to the same model. All calculations require reliable values of Kdissoc, the dissociation constant of the ROH-W species. This was previously calculated from the dependence of the density of the binary solvent mixture on its composition. Through the use of iteration, the volume of the hydrogen-bonded species, VROH-W, and Kdissoc are obtained simultaneously from the same set of experimental data. This approach may be potentially problematic because Kdissoc and VROH-W are highly correlated. Therefore, we introduced the following approach: (i) VROH-W was obtained from ab initio calculations, (ii) these volumes were corrected for the nonideal behavior of the binary solvent mixtures at different temperatures, (iii) corrected VROH-W values were employed as a constant in the equation used to calculate Kdissoc (from density vs binary solvent mixture composition). VROH-W calculated by the COSMO-RS solvation model fitted the density data better than those calculated by the IEFPCM model. In all aqueous alcohols, solvation by ROH-W is favored over that by the two precursor solvents. In aqueous ethanol, a temperature increase resulted in a gradual desolvation of RB, due to a decrease in the hydrogen-bonding of both components of the mixture. The microscopic polarities of ROH-W are much closer to those of the precursor alcohols.     

Solvent induced aggregation of protoporphyrin and octacarboxylphthalocyanine of zinc deposited on gold surface

In this paper, we studied the influence of solvent on the morphology of zinc protoporphyrin and zinc octacarboxylphthalocyanine films transferred onto gold surface by dipping. In these films, carboxylic acid groups borne in periphery of macrocycles allow anchoring to gold via ionic interaction. First, we followed by UV-Visible absorption spectroscopy the solvation state of these conjugated macrocycles in pure DMF, in pure ethanol and in various ethanol/DMF mixtures. We show that the increase in ethanol proportion promotes interactions between macrocycles. Second, molecular layers of macrocycles spontaneously adsorbed from these various solutions onto gold surface were analyzed by ellipsometry, water contact angle measurements, UV-Visible absorption spectroscopy and atomic force microscopy. Results evidenced the layers were mainly composed of grains whose size of a few nanometers was directly related to the solvation conditions of molecules. In addition, Q band splitting was observed in the absorption spectrum of zinc octacarboxylphthalocyanine grain films which indicates specific organization of those molecules. Therefore solvent is shown to have a profound influence on the nanostructuration of as-prepared macrocycle layers on gold surface by promoting pre-organization in solution, and its composition enables to better control the morphology of those films by tuning the solubilization of macrocycles.     

Solubility of minoxidil in binary mixture of ethanol + water at various temperatures

ABSTRACT

The solubility of minoxidil in the aqueous binary mixtures of ethanol at different temperature are investigated and the obtained solubility data are fitted by using some cosolvency models including van’t Hoff equation, Yalkowsky model, Jouyban–Acree model and Jouyban–Acree–van’t Hoff model. The mean relative deviations (MRD%) are used to illustrate the models performance. Moreover, the apparent entropy, enthalpy, and Gibbs free energy of minoxidil dissolution process in the investigated solvent mixtures are computed using van’t Hoff and Gibbs equations. Finally, by means of the inverse Kirkwood–Buff integrals preferential solvation of minoxidil by water is observed in water-rich and ethanol-rich mixtures.     

光谱法研究尿素对水溶液中血红蛋白构象的影响

应用荧光猝灭法和动态光散射法测定尿素-水混合溶剂中血红蛋白(Hb)与联苯胺的结合距离和Hb的流体动力学半径. 结合Hb的荧光光谱和吸收光谱, 探讨尿素与蛋白质分子在水溶液中相互作用的机理及其对蛋白质构象的影响. 结果显示, 尿素分子取代水分子在蛋白质周围形成溶剂化层, 并与骨架肽链和亲水侧链形成氢键, 从而积聚在蛋白质分子表面. 尿素分子与蛋白质分子之间的直接相互作用对蛋白质的构象具有复杂的影响, 高浓度的尿素-水混合溶剂破坏蛋白质的构象, 而低浓度的混合溶剂则有利于蛋白质形成更紧密的构象. 在高浓度的尿素-水混合溶剂中, Hb血红素疏水空穴失去原有的三级结构后形成一个与熔球态相类似的结构.     

The Standard Partial Molar Volumes of Ions in Solution. Part 3. Volumes in Solvent Mixtures Where Preferential Solvation Takes Place

Standard partial molar volumes of 1:1 salts in aqueous mixtures of ethanol (EtOH), dimethyl sulfoxide (DMSO) and acetonitrile (MeCN) at 298.15 K were obtained from the literature. In such mixtures there is evidence that preferential solvation occurs in the solvent shell around the ion where electrostriction takes place. Specifically, the anions are better solvated by the water whereas the cations are generally solvated by both the water and the nonaqueous component of the mixtures to various extents. There are no clear-cut criteria for how the measured volumes are to be apportioned between the ions in such mixtures. Various solvation models were used to estimate the volumes of the salts by calculation of the electrostriction around the ions. Only the taking into account of the preferential solvation of the ions in the solvation shell yielded calculated results of the standard partial molar volumes of the salts in agreement with the experimental data.     

Solution Thermodynamics of Piroxicam in some Ethanol + Water Mixtures and Correlation with the Jouyban–Acree Model

The solubility of piroxicam (PIR) in several ethanol + water mixtures was determined at five temperatures from 293.15 to 313.15 K. The thermodynamic functions; Gibbs energy, enthalpy, and entropy of solution and of mixing were obtained from these solubility data and the drug properties of fusion by using the van’t Hoff and Gibbs equations. The greatest solubility value was obtained in pure ethanol. A non-linear enthalpy–entropy relationship was observed from a plot of enthalpy versus Gibbs energy of solution. Accordingly, the driving mechanism for PIR solubility in water-rich mixtures is the entropy, probably due to water-structure loss around the drug’s non-polar moieties by ethanol, whereas, in ethanol-rich mixtures the driving mechanism is the enthalpy, probably due to better PIR solvation by the co-solvent molecules. The solubilities and the derived thermodynamic properties in mixed solvents were correlated using the Jouyban–Acree model.     

Preferential solvation of etoricoxib in some aqueous binary cosolvent mixtures at 298.15 K

Preferential solvation parameters of etoricoxib in several aqueous cosolvent mixtures were calculated from solubilities and other thermodynamic properties by using the IKBI method. Cosolvents studied were as follows: 1,4-dioxane, N,N-dimethylacetamide, 1,4-butanediol, N,N-dimethylformamide, ethanol and dimethyl sulfoxide. Etoricoxib exhibits solvation effects, being the preferential solvation parameter δx_1,3, negative in water-rich and cosolvent-rich mixtures but positive in mixtures with similar proportions of both solvents. It is conjecturable that the hydrophobic hydration in water-rich mixtures plays a relevant role in drug solvation. In mixtures of similar solvent proportions where etoricoxib is preferentially solvated by the cosolvents, the drug could be acting as Lewis acid with the more basic cosolvents. Finally, in cosolvent-rich mixtures the preferential solvation by water could be due to the more acidic behaviour of water. Nevertheless, the specific solute–solvent interactions in the different binary systems remain unclear because no relation between preferential solvation magnitude and cosolvent polarities has been observed.     

Electron Density Dependent Composition of the Solvation Shell of Phenol Derivatives in Binary Solutions of Water and Ethanol

The dynamic motions of solvent molecules in the solvation shell of phenols in binary water–ethanol solutions have been examined experimentally by measuring the solvent relaxation times using phase-fluorometry. The results show that the mono-exponential character of the solvent relaxation changes to bi-exponential just after the ethanol content of the bulk solution exceeds a critical value. This value depends on the electron density of the aromatic rings of the phenolic molecules. Above the critical values much higher ethanol content is observed in the solvation shell compared to the bulk solutions. This observation is applicable in wide scale of chemical processes in condensed phase and indicates that further research is needed towards development of a picture at the atomic scale.     

One-dimensional model for water and aqueous solutions. III. Solvation of hard rods in aqueous mixtures

A simple one-dimensional model for aqueous solution is applied to study the solvation thermodynamics of a simple solute (here, a hard-rod particle) in mixtures of waterlike particles and a cosolvent. Two kinds of cosolvents are considered, one that stabilizes and one that destabilizes the "structure of water." The results obtained for the Gibbs energy, entropy, enthalpy, and heat capacity of solvation are in qualitative agreement with experimental data on the solvation of argon and methane in mixtures of water and ethanol and of water and p-dioxane.