Tunable dual-wavelength fiber laser based on an opto-VLSI processor and four-wave mixing in a photonic crystal fiber

A stable wavelength and wavelength spacing tunable dual-wavelength fiber laser based on an Opto-very-large-scale-integration (Opto-VLSI) processor and four-wave mixing (FWM) in a high-nonlinear photonic crystal fiber is experimentally demonstrated. The results show that the line width of the tunable dual-wavelength fiber laser is 0.02 nm, and the wavelength spacing can be tuned from 0.8 nm to 4 nm with a 0.15 nm step. Under the influence of the FWM, the uniformity is below 0.6 dB and the measured side mode suppression ratio (SMSR) is above 45 dB.     

Design of hybrid photonic crystal fiber: Polarization and dispersion properties

A highly birefringent dispersion compensating hybrid photonic crystal fiber is presented. This fiber successfully compensates the chromatic dispersion of standard single mode fiber over E- to L-communication bands. Simulation results reveal that it is possible to obtain a large negative dispersion coefficient of about −1054.4 ps/(nm km) and a relative dispersion slope of 0.0036 nm⁻¹ at the 1550 nm wavelength. The proposed fiber simultaneously provides a high birefringence of order 3.45 × 10⁻² at the 1550 nm. Moreover, it is confirmed that the designed fiber successfully operates as a single mode in the entire band of interest. For practical conditions, the sensitivity of the fibers dispersion properties to a ±2% variation around the optimum values is carefully studied and the nonlinearity of the proposed fiber is also reported and discussed. Such fibers are essential for high speed transmission system as a dispersion compensator, sensing applications, fiber loop mirrors as well as maintaining single polarization, and many nonlinear applications such as four-wave mixing, etc.     

980 nm Yb-doped double-clad photonic crystal fiber amplifier and its frequency doubling

In this paper, we report on a large-mode-area double-clad 980 nm Yb-doped photonic crystal fiber (PCF) amplifier. In the experiment, an output power of 1.21 W at 980 nm with 2.5 nm bandwidth has been yielded when the PCF length was 40 cm. Through frequency doubling the 980 nm amplified laser with a BIBO crystal, an output power of 51 mW at 490 nm has been generated.     

Flat and compact switchable dual wavelength output at 1060 nm from ytterbium doped fiber laser with an AWG as a wavelength selector

A dual-wavelength ytterbium doped fiber laser with a narrowest spacing of 0.53 nm and widest spacing of 12.2 nm at 1064 nm is presented in this paper. An arrayed waveguide grating (AWG) together with an optical channel selector (OCS) have also been incorporated in the proposed setup that works as a switchable mechanism giving 23 different wavelength tunings. Producing an average output power of ?8 dB m and side mode suppression ratio (SMSR) of 59.65 dB, this dual-wavelength fiber laser is quite stable with an output power variance as low as 0.47 dB giving it an advantage due to its switching ability and stable dual-wavelength output powers.     

Supercontinuum generation using a passive mode-locked stretched-pulse bismuth-based erbium-doped fiber laser

A Supercontinuum (SC) generation in photonic crystal fiber (PCF) is demonstrated using an amplified picosecond stretched-pulses from a passive mode-locked Bismuth-based Erbium-doped fiber laser (Bi-EDFL). The Bi-EDFL employs of a piece of a highly nonlinear 49 cm long Bismuth-based Erbium-doped fiber (Bi-EDF), an optical isolator and a polarization controller in a cavity to generate a mode-locked stretched-pulse via a nonlinear polarization rotation technique. It operates at 1560 nm with a repetition rate of 42 MHz and a pulse width of 131 fs. The SC lights, which extends from 1250 nm to 1910 nm as well as in the visible green wavelength region are obtained with a 100 m long PCF and the amplified pump power of 30 dBm.     

A novel polarization splitter based on dual-core elliptical-holes hybrid photonic crystal fiber

A novel kind of polarization splitter in dual-core elliptical holes hybrid photonic crystal fiber is proposed. Numerical results show that the splitter can reach small coupling length ratio of 0.5, for wavelength from 1.15 μm to 1.9 μm. At wavelength 1.55 μm, the extinction ratio can achieve ?64 dB and the 1.92-mm-long splitter is suggested to achieve extinction ratio better than ?10 dB, a bandwidth of 150 nm. The fiber has small coupling length ratio, small coupling length and high extinction ratio and it is more suitable for fabricating polarization splitter.     

Ultra-broad and flat supercontinuum generation in short photonic crystal fiber combined with conventional fibers

In order to gain ultra-broad and flat super-continuum (SC) spectrum, we propose and demonstrate a new scheme. By coupling a train of short pulses with 100 fs width and 16.2 mW average power generated by a mode-locked laser into the scheme – short photonic crystal fiber (PCF) combined with conventional fibers. The SC spectrum has 491 nm bandwidth at −15 dBm below the spectral peak with ±0.5 dBm uniformity 100 nm in only 0.45 m PCF. The spectral bandwidth generated in the scheme increases 292 nm than spectrum generated in the two conventional fibers, and increases 152 nm than spectrum generated in the three convention fibers.     

Experimental study on tandem pumped fiber amplifier

We present the experimental results of a 1083 nm fiber amplifier tandem pumped by 1030 nm fiber laser. The output characteristics of the tandem pumped amplifier with cladding-pump and core-pump schemes are both investigated. The 1083 nm signal laser has not been efficiently amplified when cladding-pumped by 1030 nm laser for the weak absorption of the gain fiber. The core-pump scheme works well with the amplifier. The output properties with different gain fiber length are experimentally investigated. The maximum output power is 2.4 W with power conversion efficiency of 60%.     

High speed ultra short pulse fiber ring laser using photonic crystal fiber nonlinear optical loop mirror

A scheme to generate high speed optical pulse train with ultra short pulse width is proposed and experimentally studied. Two-step compression is used in the scheme: 20 GHz and 40 GHz pulse trains generated from a rational harmonic actively mode-locked fiber ring laser is compressed to a full width at half-maximum (FWHM) of ~ 1.5 ps using adiabatic soliton compression with dispersion shifted fibers (DSF). The pulse trains then undergo a pedestal removal process by transmission through a cascaded two photonic crystal fiber (PCF)-nonlinear optical loop mirrors (NOLM) realized using a double-ring structure. The shortest output pulse width obtained was ~ 610 fs for 20 GHz pulse train and ~ 570 fs for 40 GHz pulse train. The signal to noise ratio of the RF spectrum of the output pulse train is larger than 30 dB. Theoretical simulation of the NOLM transmission is conducted using split-step Fourier method. The results show that two cascaded NOLMs can improve the compression result compared to that for a single NOLM transmission.     

Tunable and switchable multi-wavelength Erbium-doped photonic crystal fiber ring laser incorporating a length of highly nonlinear photonic crystal fiber

A tunable and switchable multi-wavelength Erbium-doped photonic crystal fiber ring laser incorporating a length of single-mode highly nonlinear photonic crystal fiber is proposed and demonstrated experimentally. Stable dual-wavelength and triple-wavelength operations at room temperature are achieved by employing the highly nonlinear photonic crystal fiber to induce four-wave mixing effect and a polarization controller to vary the polarization states of propagation lights in the laser cavity. The laser cavity is free from any wavelength selection components. The laser obtains maximal 30 dB signal-to-noise ratio and the peak power fluctuations of lasing lines are less than 1.39 dB.     

Supercontinuum broadening in all-normal dispersion photonic crystal fiber by means of soliton compression in standard single-mode fiber

Using standard single-mode fiber as high-order soliton compressor for broadening supercontinuum in an 80 m long all-normal dispersion photonic crystal fiber is investigated experimentally and numerically. An analytical formula for calculating proper fiber input power to generate the broadest supercontinuum is derived. The numerical results show that the formula is more accurate in high power level corresponding to the soliton order which is larger than two. The measured supercontinuum ? 20 dB bandwidth is broadened from 84.2 nm to 277.1 nm by using a 20 m long standard single-mode fiber without enhancing fiber input power. Numerical calculations of the amplitude noise in the output spectra show that using soliton compression effect can efficiently broaden the spectral bandwidth and not generate obvious noises.     

A novel polarization splitter in ZnTe tellurite glass three-core photonic crystal fiber

A kind of polarization splitter in ZnTe tellurite glass three-core photonic crystal fiber has been proposed. The polarization splitter is based on the phenomenon of resonant tunneling. We use the finite element method and the full-vector beam propagating method to analyze the characteristics of three-core photonic crystal fiber. Compare with the silica glass three-core PCF, the ZnTe tellurite glass three-core PCF have higher extinction ratios and lower coupling loss, the extinction ratios ERA = ? 164.2681 dB and ERC = ? 37.1742 dB at the wavelength λ = 1.55 μm, and the coupling loss is lower than 0.02 dB. The 8.7983-mm-long splitter is proposed to achieve extinction ratio better than ? 20 dB and a bandwidthof 20 nm.     

Improved flatness and tunable bandwidth of the supercontinuum generation in all-normal dispersion-flattened PCF using Littman–Metcalf optical bandpass filter

We have proved that in an all-normal dispersion-flattened photonic crystal fiber (PCF), the four-wave mixing (FWM) process dominantly affects the flatness of the generated supercontinuum (SC). The numerical results show that pulses with steepened edges can enhance the FWM conversion efficiency during the SC’s generation and the minima of the spectral oscillatory structure will be smoothed. A double-pass Littman–Metcalf optical bandpass filter is used to make the 1.60 ps hyperbolic-Secant shaped pulses obtain steepened edges. The experimental results show that the flatness of the SC generated from the 4 nm filtered pulses is improved by 0.21 dB. The SC with 10–65 nm tunable bandwidths is obtained by adjusting the filter bandwidth from 1 nm to 7 nm. Further numerical results show that the filter induced SC’s flatness improvement is more effective for pulses with 2.0–4.0 ps FWHM. The improved SC can be used for applications which require stable modulation carriers and flexible bandwidth.     

A linearly-polarized tunable Yb-doped fiber laser using a polarization dependent fiber loop mirror

A Ytterbium-doped linearly-polarized fiber laser is constructed with a polarization maintaining fiber Sagnac loop mirror. The fiber loop mirror made of polarization maintaining fiber coupler has a polarization dependent reflectivity, which provides the necessary polarization discrimination between the slow and fast axes. With a fiber Bragg grating written in normal polarization maintaining fiber as an output coupler, laser output of up to 5.6 W at 1070 nm is generated with a polarization extinction ratio of > 20 dB and an overall efficiency of 55%. The broadband polarization dependent reflection of the fiber loop mirror offers advantages of easy spectral tuning and simple linearly-polarized laser generation.     

Switchable multi-wavelength fiber ring laser using a side-leakage photonic crystal fiber based filter

A switchable multi-wavelength fiber ring laser is proposed and experimentally demonstrated with a novel side-leakage photonic crystal fiber (SLPCF) based filter incorporated into the ring cavity at room temperature. Stable multi-wavelength laser operations can be achieved due to the spatial mode beating, polarization hole burning and spectral hole burning effects. By adjusting the polarization controller appropriately, the laser can be switched among the single-, dual- and triple-wavelength lasing oscillations whose signal-to-noise ratio is up to 50 dB. In addition, the lasing wavelength can be also tuned and switched by applying the strain to the filter.     

Theory and experiment of flat-top all-fiber comb filter based on two high birefringence fiber Sagnac loop filters

A simple flat-top all-fiber comb filter based on two high birefringence fiber (HBF) Sagnac loop filters is presented. The proposed flat-top comb filter consists of two HBF Sagnac loop filters with two polarization controllers (PCs) and a fiber circulator. According to the theoretical analysis, with proper settings of the polarization state of the PCs, the comb filter can realize flat-top passband and the channel spacing also can be switched when the comb filter is convex spectrum. The 0.3 dB bandwidth of the flat-top passband is 0.49 nm with a free spectral range of 1.4 nm. The maximum extinction ratio is nearly 20 dB. The comb filter with switchable channel spacing can be obtained from 0.7 nm to 1.4 nm.     

Wavelength tunable,high energy femtosecond laser pulses directly generated from large-mode-area photonic crystal fiber

Wavelength tunable high energy ultrashort laser pulses are generated from a large-mode-area photonic crystal fiber in anomalous dispersion (AD) regime. A simplified laser cavity design with one fine polished facet of the fiber as a cavity mirror is used. The intra-cavity dispersion compensation is achieved by a grating pair, the spatial dispersed light from which also have optical spectrum filtering effects combined with the limited aperture of the fiber core. The laser system is able to generate ultrashort pulses ranging from 494 fs (with 56 nJ pulse energy) to 1.24 ps (with 49 nJ pulse energy) at 55 MHz repetition rate. The filtering mechanism benefits the generation of high energy pulses with narrowing pulse duration in AD regime. An undulation in frequency and time domain is also observed with the increase of the pump power. Furthermore, this laser system is directly used as seed for supercontinuum generation.     

Spacing-tunable multi-wavelength fiber laser based on cascaded four-wave mixing in highly nonlinear photonic-crystal fiber

A multi-wavelength fiber laser based on the cascaded four-wave mixing in highly-nonlinear photonic-crystal fiber is proposed and investigated. The cascade operation is initiated by two strong pump waves boosted by multi-mode pumping erbium/ytterbium co-doped double-cladding fiber amplification technique. A segment of highly-nonlinear near-zero-dispersion-flattened photonic crystal fiber is employed to induce highly efficient cascaded four-wave mixing. The wavelength spacing can be continuously tunable by stretching the fiber Bragg grating. Experimental results show that multiple wavelengths with a high optical side-mode suppression-ratio of >30 dB are achieved. Furthermore, the proposed multi-wavelength fiber laser exhibits an excellent stability at room temperature.     

Numerical analysis of a broadband spectrum generated in a standard fiber by noise-like pulses from a passively mode-locked fiber laser

This paper covers a numerical analysis of supercontinuum spectrum generation in a piece of standard fiber by using as the pump noise-like pulses produced by a passively mode-locked fiber laser. An experimental study was also carried out, yielding results that support the numerical results. In the numerical study we estimated that the spectral extension of the generated supercontinuum reaches ~ 1000 nm, and that it presents a high flatness over a region of ~ 220 nm (1630 nm-1850 nm) when we use as the pump noise-like pulses with a wide optical bandwidth (~ 50 nm) and a peak power of ~ 2 kW. Experimentally, the output signal spectrum extends from ~ 1530 nm to at least 1750 nm and presents a high flatness over a region of 1640 nm to 1750 nm for the same value of numerical input power, 1750 nm being the upper limit of the optical spectrum analyzer. The numerical analysis presented here is thus an essential part to overcome the severe limitation in measuring capabilities and to understand the phenomena of supercontinuum generation, which is mainly related to Raman self-frequency shift. Finally, this work demonstrates the potential of noise-like pulses from a passively mode-locked fiber laser for broadband spectrum generation.     

Dual-wavelength narrow-linewidth fiber laser based on F-P fiber ring filter

A dual-wavelength fiber laser with a narrow-linewidth, based on a P-F fiber filter has been proposed. Polarization-maintaining fiber Bragg grating (PM-FBG) and a F-P fiber filter are introduced based on the traditional fiber laser. PM-FBG is used as the wavelength selection device. The fiber F-P filter consists of two optical couplers and a section of un-pumped erbium-doped fiber (EDF). Due to the delay of cavity and the loss generated by the EDF, the filter has comb spectral response. The incorporation of the fiber F-P filter leads to the suppression of undesirable modes. At the room temperature, under 980 nm LD pumped, the maximum output of the two wavelengths is respectively ?2.259 dBm and 0.568 dBm, with the 3-dB bandwidth separately 0.1 nm and 0.14 nm, realizing the narrow linewidth and dual-wavelength output.