2-氨基嘧啶在盐酸介质中对钢的缓蚀性能

用失重法、动电位极化曲线和电化学阻抗谱（EIS）研究了2-氨基嘧啶(2-AP)在1.0~5.0 mol/L HCl溶液中（20~50 ℃）对冷轧钢的缓蚀作用。 结果表明,2-AP对冷轧钢在1.0 mol/L HCl中具有良好的缓蚀作用,且在钢表面的吸附符合校正的Langmuir吸附模型;缓蚀率随缓蚀剂浓度的增加而增大,但随温度的升高和HCl浓度的增加而降低。 2-AP为混合抑制型缓蚀剂;EIS谱呈半圆容抗弧,电荷转移电阻随缓蚀剂浓度的增加而增大。     

HCl溶液中1,2-二(苯并咪唑-2-硫基)乙烷对碳钢的缓蚀行为研究

合成了缓蚀剂1,2-二(苯并咪唑-2-硫基)乙烷((bit)_2E),用元素分析、红外光谱、核磁共振谱和液质联用技术确证了缓蚀剂的分子结构。用静态失重法、动电位极化曲线法和扫描电子显微镜评价了(bit)_2E在HCl溶液中对碳钢的缓蚀性能。结果表明(bit)_2E是一种混合型缓蚀剂,缓蚀率随缓蚀剂浓度增加而增大,随HCl浓度增大而减小,受腐蚀体系温度和放置时间影响较小。在30℃的1.0 mol·L~(-1)HCl溶液中,(bit)_2E浓度为1.0×10~(-3)mol·L~(-1)时的缓蚀率为95.68%。(bit)_2E作为新型缓蚀剂在碳钢表面上的吸附符合Langmuir吸附等温方程式,属于自发进行的物理和化学吸附。     

红茶提取液在盐酸中对碳钢的缓蚀作用

采用动电位极化曲线和交流阻抗（EIS）研究了红茶提取液（BLE）在盐酸介质中对碳钢的缓蚀性能和缓蚀机理。 研究结果表明,采用索氏提取法从红茶茶叶中提取的缓蚀剂,对碳钢在1.0 mol/L盐酸溶液中具有良好的缓蚀性能,随着提取物浓度的增加,缓蚀效率增大。 红茶提取液中的有效缓蚀成分为抑制阴阳极反应的混合型缓蚀剂,在碳钢表面的吸附符合Langmuir等温式,属于单分子层吸附。     

盐酸介质中水杨醛缩氨基硫脲对碳钢的缓蚀作用

合成了新型席夫碱缓蚀剂:水杨醛缩氨基硫脲(ST),并考察了其在1 mol/L盐酸溶液中对碳钢的缓蚀性能。通过静态失重、动电位极化曲线、交流阻抗等技术手段研究缓蚀剂浓度对腐蚀速率及缓蚀效率的影响,阐明缓蚀作用机理。结果表明,ST在盐酸介质中对碳钢具有良好的缓蚀性能。随着缓蚀剂浓度的增加,缓蚀效率逐渐增大。ST的加入显著降低了自腐蚀电流密度,为抑制阴极反应为主的缓蚀剂。ST在碳钢表面的吸附符合Langmuir吸附模型,为物理吸附与化学吸附共同作用。     

席夫碱缓蚀剂的合成及其对碳钢材料缓蚀性能

采用失重法和电化学方法研究了2种席夫碱类缓蚀剂N,N′-二水杨醛基-1,2-乙二亚胺（SB-Ⅰ）和水杨醛基吡啶-2-亚胺(SB-Ⅱ)在1 mol/L盐酸溶液中对A3碳钢的缓蚀性能。 失重实验表明,SB-Ⅰ和SB-Ⅱ在1 mol/L盐酸溶液中的浓度为20 mmol/L时,缓蚀效率分别达85%和92%。 经三电极体系极化曲线和交流阻抗谱测定实验表明,缓蚀性能是由于碳钢材料表面为缓蚀剂分子吸附所致,二者均属阴极型缓蚀剂。     

席夫碱缓蚀剂对碳钢材料的缓蚀性能

采用失重法和电化学方法研究了2种席夫碱类缓蚀剂N,N′-二水杨醛基-1,2-乙二亚胺(SB-Ⅰ)和水杨醛基吡啶-2-亚胺(SB-Ⅱ)在1mol/L盐酸溶液中对A3碳钢的缓蚀性能。失重实验表明,SB-Ⅰ和SB-Ⅱ在1mol/L盐酸溶液中的浓度为20mmol/L时,缓蚀效率分别达85%和92%。经三电极体系极化曲线和交流阻抗谱测定实验表明,缓蚀性能是由于碳钢材料表面为缓蚀剂分子吸附所致,二者均属阴极型缓蚀剂。     

含芳香结构聚天冬氨酸衍生物的合成及缓蚀性能研究

以聚琥珀酰亚胺(PSI)、N-(3-氨丙基)咪唑和2-苯乙胺为原料,合成了一种含有咪唑和苯环结构的聚天冬氨酸衍生物(PASP-D),利用电化学极化、阻抗及失重法,系统研究了PASP-D在0.5 mol/L H_2SO_4溶液中对碳钢的缓蚀性能.结果表明,PASP-D是一种混合型缓蚀剂,但以抑制阴极反应为主.在较低的浓度下,PASP-D即可显著地抑制碳钢在0.5 mol/L硫酸溶液中的腐蚀.热力学研究表明,PASP-D在碳钢表面的吸附包含物理作用和化学作用.     

硫酸溶液中聚天冬氨酸对碳钢的吸附缓蚀性能

应用电化学极化曲线和交流阻抗研究聚天冬氨酸(PASP)对碳钢的缓蚀性能,讨论了PASP浓度和温度对缓蚀效果的影响.结果表明:PASP是一种以抑制阳极为主的缓蚀剂.在实验温度范围内,PASP在0.5mol/L硫酸溶液中对碳钢的缓蚀效率随着温度升高而降低,并以10℃时的缓蚀效果最好.在给定温度下,缓蚀率均随PASP浓度的增加而迅速增加,但当PASP质量浓度达到2.5g/L时,缓蚀率的增加趋于平缓,10℃下,缓蚀率的最高值可达80.33%(PASP 6.0g/L),PASP在碳钢表面的吸附基本服从Freund lich吸附等温式,PASP的加入增大了碳钢的腐蚀反应表观活化能.     

两种席夫碱缓蚀剂对碳钢材料的缓蚀性能探究

采用了电化学方法研究了2种席夫碱缓蚀剂水杨醛基邻苯甲酸亚胺(SB-I)和N,N’-二水杨醛基-1,2-邻苯二亚胺(SB-II)在1 mol/L盐酸溶液中对20#碳钢的缓蚀性能。通过极化曲线和交流阻抗谱研究该席夫碱对碳钢的缓蚀效果表明:席夫碱对碳钢材料具有良好的缓蚀作用,其最大缓蚀率可达到83%。研究了席夫碱在碳钢表面的吸附模式,结果表明,席夫碱在碳钢表面上的吸附吉布斯自由能在-30 kJ/mol之间,表现为混合型缓蚀剂,即通过化学吸附和物理吸附之间的一种混合吸附在碳钢工作电极的表面,通过抑制、阻止延缓金属的电化学过程而起到缓蚀的作用。另外,实验还发现,SB-I比SB-II具有更好的缓蚀性能,该实验结果与理论计算结果相符合。     

芳氧亚甲基咪唑啉季铵盐的合成及缓蚀性能评价

合成了苯氧亚甲基咪唑啉季铵盐（POAI）和萘氧亚甲基咪唑啉季铵盐（NOAI）,通过失重法、电化学方法研究了二者在1 mol/L HCl中对A3钢的缓蚀性能,并对二者在A3钢表面的吸附行为进行了探讨。 结果表明,二者在1 mol/L HCl中对A3钢均有较好的缓蚀作用,其中NOAI对A3钢的缓蚀性能优于POAI的缓蚀性能;两化合物均为混合型缓蚀剂。 缓蚀性能随缓蚀剂浓度和温度的增大而增大;二者在A3钢表面的吸附过程吸热,是化学吸附,符合Langmuir吸附等温式。     

Inhibition of aluminium and mild steel corrosion in acidic medium using Gum Arabic

The corrosion behaviour of mild steel and aluminium exposed to H₂SO₄ solution and their inhibition in H₂SO₄ containing 0.1–0.5 g/L Gum Arabic (GA) used as inhibitor was studied at temperature range of 30–60 °C using weight loss and thermometric techniques. Corrosion rate increased both in the absence and presence of inhibitor with increase in temperature. Corrosion rate was also found to decrease in the presence of inhibitor compared to the free acid solution. Inhibition efficiency increases with increase in concentration of the inhibitor reaching a maximum of 37.88% at 60 °C for mild steel and 79.69% at 30 °C for aluminium at 0.5 g/L concentration of GA. The inhibitor, GA was found to obey Temkin and El-Awady et al. thermodynamic kinetic adsorption isotherm for mild steel and aluminium respectively from the fit of the experimental data at all concentrations and temperatures studied. The phenomenon of chemical adsorption is proposed for mild steel corrosion, while physical adsorption mechanism is proposed for aluminium corrosion. Results obtained for the kinetic/thermodynamic studies indicate that the adsorption of GA onto the metals surface was spontaneous. GA is a better corrosion inhibitor for aluminium than for mild steel.     

Hydroclathrus clathratus marine alga as a green inhibitor of acid corrosion of mild steel

The corrosion inhibitive and adsorption behaviors of Hydroclathrus clathratus on mild steel in 1 M HCl and 1 M H₂SO₄ solutions at 303, 313 and 323 K were investigated by weight loss, electrochemical, and surface analysis techniques. The results show that H. clathratus acts as an inhibitor of corrosion of mild steel in acid media. The inhibition efficiency was found to increase with increase in inhibitor concentration but to decrease with rise in temperature, suggestive of physical adsorption. The adsorption of the inhibitor onto the mild steel surface was found to follow the Temkin adsorption isotherm. The inhibition mechanism was further corroborated by the results obtained from electrochemical methods. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses supported the inhibitive action of the alga against acid corrosion of mild steel.     

A study of synthesized Mannich base inhibition on mild steel corrosion in acid medium

1((Cyclohexylamino)methyl)urea Mannich base was synthesized and characterized using FT-IR, H¹NMR and C¹³NMR spectra and it was tested as a corrosion inhibitor for mild steel in 1?N HCl and 1?N H₂SO₄ solutions using potentiodynamic polarization and AC impedance techniques over the temperature range of 303?C333?K. The inhibition efficiency was increased with respect to concentration of inhibitor and temperature in 1?N HCl, whereas the inhibition efficiency was increased with respect to concentration of inhibitor and decreased with respect to temperature in 1?N H₂SO₄. Potentiodynamic polarization results revealed that the inhibitor acts as mixed type inhibitor. AC impedance study indicates that the corrosion of steel was mainly controlled by a charge transfer process. Surface analysis was carried out using SEM technique. The adsorption of inhibitor follows Langmuir adsorption isotherm. Activation and adsorption parameters were calculated to gain information about the inhibitive action mechanism.     

Mild steel corrosion inhibition by acid extract of leaves of Hibiscus sabdariffa as a green corrosion inhibitor and sorption behavior

A new corrosion inhibitor, namely acid extract of leaves of Hibiscus sabdariffa, has been synthesized, and its inhibiting action on the corrosion of mild steel in acidic bath (1.2 N HCl and 1.2 N H₂SO₄) has been investigated by corrosion-monitoring techniques. The results of the present study show that this compound has decent inhibiting property for mild steel corrosion in 1.2 N H₂SO₄ than 1.2 N HCl. Four sorption isotherms are tested for the data, namely Langmuir, Frumkin, Florry–Huggins, and Langmuir–Freundlich isotherms; of these the Langmuir isotherm fits the data well having correlation coefficient over 0.99 in both the acid environments.     

Spirulina platensis – A novel green inhibitor for acid corrosion of mild steel

The inhibition of the corrosion of mild steel in 1 M HCl and 1 M H₂SO₄ by Spirulina platensis has been studied at different temperatures viz., 303 K, 313 K and 323 K by weight loss method, potentiodynamic polarization method, electrochemical impedance spectroscopy measurements and SEM analysis. The inhibition efficiency increased with increasing concentration of the inhibitor in both HCl and H₂SO₄ media. The results of weight loss studies correlated well with those of impedance and polarization studies. From the results of weight loss studies at various temperatures, the mode of adsorption is confirmed to be physisorption. Further the adsorption has been found to follow Temkin isotherm. From this isotherm, the free energy of adsorption (ΔG) and entropy (ΔS) are calculated. The study reveals the corrosion inhibition potential of S. platensis in both the acid media, thus bringing to light another facet of this microalga as it has so far been used only to produce antioxidant principles, finding extensive use in medicine especially as neutraceutical.     

Monte Carlo simulation and electrochemical performance corrosion inhibition whid benzimidazole derivative for XC48 steel in 0.5 M H2SO4 and 1.0 M HCl solutions

The inhibition of 1-(4-methoxybenzyl)-2-(4-methoxyphenyl)-1H-benzimidazole (MMB) on corrosion of XC48 steel in solutions 1.0 M HCl and 0.5 M H₂SO₄ were studied by potentiodynamic polarization and electrochemical impedance spectroscopy techniques (EIS). Potentiodynmic polarization curves revealed that MMB acts as a mixed-type inhibitor in both acidic media. The impedance results indicated that the corrosion process occurs under activation control. Furthermore, MMB shows a higher inhibition efficiency in HCl (97%) than in H₂SO₄ (92%) at 10^?4 M MMB. The values of ΔG°_ads, ΔH_a, E_a and ΔS_a in temperature range 293–323 K indicated that MMB strongly retarded the corrosion of XC48 steel in both solutions by a chemisorptions process. The adsorption of Benzimidazole (MMB) on carbon steel surface followed Langmuir adsorption isotherm. Scanning electron microscopy (SEM) analysis confirmed that there is an adsorbed film on the surface of XC48 steel. The results of Monte Carlo simulations studies confirmed the inhibition action of MMB.     

Surface morphological and impedance spectroscopic studies on the interaction of polyethylene glycol (PEG) and polyvinyl pyrrolidone (PVP) with mild steel in acid solutions

The inhibition of mild steel corrosion in aerated acid mixture of 0.5 N H₂SO₄ and 0.5 N HCl solution was investigated using potentiodynamic polarization studies, linear polarization studies, electrochemical impedance spectroscopy, adsorption, and surface morphological studies. The effect of inhibitor concentration on corrosion rate, degree of surface coverage, adsorption kinetics, and surface morphology is investigated. The inhibition efficiency increased markedly with increase in additive concentration. The presence of PEG and PVP decreases the double-layer capacitance and increases the charge-transfer resistance. The inhibitor molecules first adsorb on the metal surface following a Langmuir adsorption isotherm. Both PEG and PVP offer good inhibition properties for mild steel and act as mixed-type inhibitors. Surface analysis by scanning electron microscopy (SEM) and atomic force microscopy (AFM) shows that PVP offers better protection than PEG.     

Inhibitive,adsorption and synergistic studies on ethanol extract of Gnetum Africana as green corrosion inhibitor for mild steel in H2SO4

Abstract

The inhibitive and adsorptive characteristics of ethanol extract of Gnetum Africana for the corrosion of mild steel in H₂SO₄ solutions have been studied using weight loss, gasometric, thermometric, and IR methods of monitoring corrosion. Ethanol extract of Gnetum Africana is a good adsorption inhibitor for the corrosion of mild steel in H₂SO₄. The inhibitive property of the extract is attributed to the presence of alkaloid, saponin, tannin, terpene, anthraquinone, cardiac glycoside, and alkaloid in the extract. The adsorption of the inhibitor on mild steel surface is exothermic, spontaneous and is consistent with the mechanism of physical adsorption. In addition, Langmuir and Temkin adsorption isotherms best described the adsorption characteristics of the inhibitor. Efforts to improve the adsorption of the inhibitor through synergistic combinations with halides indicated that only KCl may enhance the efficiency of the inhibitor. The study provides information on the use of ethanol extract of Gnetum Africana as a corrosion inhibitor for mild steel.     

The litchi (Litchi Chinensis) peels extract as a potential green inhibitor in prevention of corrosion of mild steel in 0.5 M H2SO4 solution

The corrosion inhibition of mild steel in 0.5 M H₂SO₄ solution by the extract of litchi peel (Litchi chinensis) was studied by weight loss method, potentiodynamics polarization and electrochemical impedance spectroscopy (EIS). The results show that the litchi peels extract acts as mixed-type inhibitor. The inhibition of corrosion is found to be due to adsorption of the extract on metal surface, which is in conformity with Langmuir’s adsorption isotherm. UV–Vis, Fourier transform infrared (FT-IR) spectroscopy and Scanning electron microscopy (SEM) studies confirm that the inhibition of corrosion of mild steel occurs through adsorption of the inhibitor molecules.