Step‐by‐Step Synthesis of the Endohedral Stannaspherene [Ir@Sn12]3− via the Capped Cluster Anion [Sn9Ir(cod)]3−

The endohedral stannaspherene cluster anion [Ir@Sn₁₂]^3? was synthesized in two steps. The reaction of K₄Sn₉ with [IrCl(cod)]₂ (cod: 1,5‐cyclooctadienyl) in ethylenediamine (en) solution first yielded the [K(2,2,2‐crypt)]⁺ salt (2,2,2‐crypt: 4,7,13,16,21,24‐hexaoxa‐1,10‐diazabicyclo[8.8.8]hexacosane) of the capped cluster anion [Sn₉Ir(cod)]^3?. Subsequently, crystals of this compound were dissolved in en, followed by the addition of triphenylphosphine or 1,2‐bis(diphenylphosphino)ethane and treatment at elevated temperatures. [Ir@Sn₁₂]^3? was obtained and characterized as the [K(2,2,2‐crypt)]⁺ salt. The isolation of [Sn₉Ir(cod)]^3? as an intermediate product establishes that the formation of the stannaspherene [Ir@Sn₁₂]^3? occurs through the oxidation of [Sn₉Ir(cod)]^3?. Among the structurally characterized tetrel cluster anions, [Ir@Sn₁₂]^3? is a unique example of a stannaspherene, and one of the rare spherical clusters encapsulating a metal atom that is not a member of Group 10. Single‐crystal structure determination shows that the novel Zintl ion cluster has nearly perfect icosahedral I_h point symmetry.     

The Neat Ternary Solid K5−xCo1−xSn9 with Endohedral [Co@Sn9]5− Cluster Units: A Precursor for Soluble Intermetalloid [Co2@Sn17]5− Clusters

A new type of Zintl phase is presented that contains endohedrally filled clusters and that allows for the formation of intermetalloid clusters in solution by a one‐step synthesis. The intermetallic compound K_5?xCo_1?xSn₉ was obtained by the reaction of a preformed Co? Sn alloy with potassium and tin at high temperatures. The diamagnetic saltlike ternary phase contains discrete [Co@Sn₉]^5? clusters that are separated by K⁺ ions. The intermetallic compound K_5?xCo_1?xSn₉ readily and incongruently dissolves in ethylenediamine and in the presence of 4,7,13,16,21,24‐hexaoxa‐1,10‐diazabicyclo[8.8.8]hexacosane (2.2.2‐crypt), thereby leading to the formation of crystalline [K([2.2.2]crypt)]₅[Co₂Sn₁₇]. The novel polyanion [Co₂Sn₁₇]^5? contains two Co‐filled Sn₉ clusters that share one vertex. Both compounds were characterized by single‐crystal X‐ray structure analysis. The diamagnetism of K_5?xCo_1?xSn₉ and the paramagnetism of [K([2.2.2]crypt)]₅[Co₂Sn₁₇] have been confirmed by superconducting quantum interference device (SQUID) and EPR measurements, respectively. Quantum chemical calculations reveal an endohedral Co^1? atom in an [Sn₉]^4? nido cluster for [Co@Sn₉]^5? and confirm the stability of the paramagnetic [Co₂Sn₁₇]^5? unit.     

The [Sn5]2– Cluster Compound [K‐(2,2,2‐crypt)]2Sn5 – Synthesis,Crystal Structure,Raman Spectrum,and Hierarchical Relationship to CaIn2

Dark red crystals of [K‐(2,2,2)‐crypt)]₂Sn₅ precipitate after the reaction of (2,2,2)‐crypt with a solution of K_1.33Sn in liquid ammonia at room temperature. The compound is sensitive to oxidation and hydrolysis. The sequence of Raman bands (104, 120, 133 and 180 cm^–1) is characteristic for the trigonal bipyramidal closo‐[Sn₅]^2– cluster anion. The wave numbers correspond with the data from Hartree‐Fock calculations (114, 128, 142 and 187 cm^–1). The compound crystallizes trigonally (a = 11.736 Å, c = 22.117 Å, Z = 2, space group P3c1 (No. 165); Pearson code hP262), isotypic with [Na‐(2,2,2)‐crypt)]₂Pb₅. The atoms of the cluster show strange anisotropic displacements, which are perfectly reducible to a helical rigid‐body motion around and along [001] (libration: ± 9.5°; translation ± 0.29 Å). The structure can be described as a hierarchical derivative of the initiator CaIn₂ (P6₃/mmc, hP6), generated by an atom‐to‐aggregate replacement: [Ca][In]₂ = [Sn₅][K @ C₃₆H₇₂N₄O₁₂]₂. Thus, the distribution of the [Sn₅]^2– Zintl anions is hexagonal primitive, and the cation complexes are located close to the centers of trigonal superprisms formed by Sn₅ clusters.     

{[CuSn5Sb3]2−}2: A Dimer of Inhomogeneous Superatoms

Reaction of the binary Zintl anion (Sn₂Sb₂)^2? with the β‐diketiminato complex [LCu(NCMe)] (L=nacnac=[(N(C₆H₃ⁱPr₂‐2,6)C(Me))₂CH]^?) in ethylenediamine or DMF affords the ternary cluster dimer {[CuSn₅Sb₃]^2?}₂ ( 1 ) as its [K(crypt‐222)]⁺ salt. The chemical formulation of 1 is supported by energy‐dispersive X‐ray spectroscopy (EDX) and quantum chemical calculations. Each monomeric part of the dimer represents a trimetallic “[CuSn₅Sb₃]^2?” cluster, with an architecture in between a tricapped trigonal prism and a capped square antiprism. As shown by quantum chemical investigations, the presence of Sb atoms and, in particular, of Cu atoms in the cluster skeleton makes the monomeric unit behave like an inhomogeneous superatom, which clearly prefers to dimerize, thereby producing a relatively short, yet virtually non‐bonding Cu???Cu distance.     

Efficient Cluster‐Based Catalysts for Asymmetric Hydrogenation of α‐Unsaturated Carboxylic Acids

The new clusters [H₄Ru₄(CO)₁₀(μ‐1,2‐P‐P)], [H₄Ru₄(CO)₁₀(1,1‐P‐P)] and [H₄Ru₄(CO)₁₁(P‐P)] (P‐P=chiral diphosphine of the ferrocene‐based Josiphos or Walphos ligand families) have been synthesised and characterised. The crystal and molecular structures of eleven clusters reveal that the coordination modes of the diphosphine in the [H₄Ru₄(CO)₁₀(μ‐1,2‐P‐P)] clusters are different for the Josiphos and the Walphos ligands. The Josiphos ligands bridge a metal–metal bond of the ruthenium tetrahedron in the “conventional” manner, that is, with both phosphine moieties coordinated in equatorial positions relative to a triangular face of the tetrahedron, whereas the phosphine moieties of the Walphos ligands coordinate in one axial and one equatorial position. The differences in the ligand size and the coordination mode between the two types of ligands appear to be reflected in a relative propensity for isomerisation; in solution, the [H₄Ru₄(CO)₁₀(1,1‐Walphos)] clusters isomerise to the corresponding [H₄Ru₄(CO)₁₀(μ‐1,2‐Walphos)] clusters, whereas the Josiphos‐containing clusters show no tendency to isomerisation in solution. The clusters have been tested as catalysts for asymmetric hydrogenation of four prochiral α‐unsaturated carboxylic acids and the prochiral methyl ester (E)‐methyl 2‐methylbut‐2‐enoate. High conversion rates (>94 %) and selectivities of product formation were observed for almost all catalysts/catalyst precursors. The observed enantioselectivities were low or nonexistent for the Josiphos‐containing clusters and catalyst (cluster) recovery was low, suggesting that cluster fragmentation takes place. On the other hand, excellent conversion rates (99–100 %), product selectivities (99–100 % in most cases) and good enantioselectivities, reaching 90 % enantiomeric excess (ee) in certain cases, were observed for the Walphos‐containing clusters, and the clusters could be recovered in good yield after completed catalysis. Results from high‐pressure NMR and IR studies, catalyst poisoning tests and comparison of catalytic properties of two [H₄Ru₄(CO)₁₀(μ‐1,2‐P‐P)] clusters (P‐P=Walphos ligands) with the analogous mononuclear catalysts [Ru(P‐P)(carboxylato)₂] suggest that these clusters may be the active catalytic species, or direct precursors of an active catalytic cluster species.     

A Novel 2‐D Copper(II) Complex with Paddlewheel‐like Building Block

By reaction of CuCl₂ with H₄btc (H₄btc = 1,2,4,5‐benzenetetracarboxylic acid) in mixed N,N‐dimethylformamide (DMF) and methanol solution, a new two‐dimensional (2‐D) copper(II) complex [Cu(btc)_0.5(DMF)]_n ( 1 ) based on the paddlewheel‐like [Cu₂(‐CO₂)₄(DMF)₂] building blocks has been synthesized, which is different from those previous Cu‐btc(II) coordination polymers obtained in water medium. Four carboxylate groups of (btc)^4? anion in 1 consistently exhibit bidentate bridging coordination mode, affording an unusual coordination mode of (btc)^4?. Further analysis indicates C–H···π weak interactions are the primary driving forces to assemble the 2‐D layers of 1 into a 3‐D packing structure.     

Endohedrally Filled [Ni@Sn9]4− and [Co@Sn9]5− Clusters in the Neat Solids Na12Ni1−xSn17 and K13−xCo1−xSn17: Crystal Structure and 119Sn Solid‐State NMR Spectroscopy

A systematic approach to the formation of endohedrally filled atom clusters by a high‐temperature route instead of the more frequent multistep syntheses in solution is presented. Zintl phases Na₁₂Ni_1?xSn₁₇ and K_13?xCo_1?xSn₁₇, containing endohedrally filled intermetalloid clusters [Ni@Sn₉]^4? or [Co@Sn₉]^5? beside [Sn₄]^4?, are obtained from high‐temperature reactions. The arrangement of [Ni@Sn₉]^4? or [Co@Sn₉]^5? and [Sn₄]^4? clusters, which are present in the ratio 1:2, can be regarded as a hierarchical replacement variant of the hexagonal Laves phase MgZn₂ on the Mg and Zn positions, respectively. The alkali‐metal positions are considered for the first time in the hierarchical relationship, which leads to a comprehensive topological parallel and a better understanding of the composition of these compounds. The positions of the alkali‐metal atoms in the title compounds are related to the known inclusion of hydrogen atoms in the voids of Laves phases. The inclusion of Co atoms in the {Sn₉} cages correlates strongly with the number of K vacancies in K_13?xCo_1?xSn₁₇ and K_5?xCo_1?xSn₉, and consequently, all compounds correspond to diamagnetic valence compounds. Owing to their diamagnetism, K_13?xCo_1?xSn₁₇, and K_5?xCo_1?xSn₉, as well as the d‐block metal free binary compounds K₁₂Sn₁₇ and K₄Sn₉, were characterized for the first time by ¹¹⁹Sn solid‐state NMR spectroscopy.     

Neue molekulare Indium‐Zinn‐Sauerstoff‐ und Indium‐Zinn‐Natrium‐Sauerstoff‐Chlor‐Cluster

Abstract. The five‐membered heteroelement cluster THF · Cl₂In(O^tBu)₃Sn reacts with the sodium stannate [Na(O^tBu)₃Sn]₂ to produce either the new oxo‐centered alkoxo cluster ClInO[Sn(O^tBu)₂]₃ ( 1 ) (in low yield) or the heteroleptic alkoxo cluster Sn(O^tBu)₃InCl₃Na[Sn(O^tBu)₂]₂ ( 2 ). X‐ray diffraction analyses reveal that in compound 1 the polycyclic entity is made of three tin atoms which together with a central oxygen atom form a trigonal, almost planar triangle, perpendicular to which a further indium atom is connected through the oxygen atom. The metal atoms thus are arranged in a Sn₃In pyramid, the edges of which are all saturated by bridging tert‐butoxy groups. The indium atom has a further chloride ligand. Compound 2 has two trigonal bipyramids as building blocks which are fused together at a six coordinate indium atom. One of the bipyramids is of the type SnO₃In with tert‐butyl groups on the oxygen atoms, while the other has the composition InCl₃Na with chlorine atoms connecting the two metals. The sodium atom in 2 has further contacts to two plus one alkoxide groups which are part of a[Sn(O^tBu)₂]₂ dimer disposing of a Sn₂O₂ central cycle. The hetero element cluster in 2 thus combines three closed entities and its skeleton SnO₃InCl₃NaO₂Sn₂O₂ consists of three different metallic and two different non‐metallic elements.     

[Ni(terpy)(H2O)]‐trans‐[Ni‐(μ‐CN)2‐(CN)2]n,a one‐dimensional linear tetra­cyano­nickelate chain

The one‐dimensional chain catena‐poly­[[aqua(2,2′:6′,2′′‐terpyridyl‐κ³N)­nickel(II)]‐μ‐cyano‐κ²N:C‐[bis­(cyano‐κC)nickelate(II)]‐μ‐cyano‐κ²C:N], [Ni(terpy)(H₂O)]‐trans‐[Ni‐μ‐(CN)₂‐(CN)₂]_n or [Ni₂­(CN)₄­(C₁₅H₁₁N₃)(H₂O)], consists of infinite linear chains along the crystallographic [10] direction. The chains are composed of two distinct types of nickel ions, paramagnetic octahedral [Ni(terpy)(H₂O)]²⁺ cations (with twofold crystallographic symmetry) and diamagnetic planar [Ni(CN)₄]^2? anions (with the Ni atom on an inversion center). The [Ni(CN)₄]^2? units act as bidentate ligands bridging through two trans cyano groups thus giving rise to a new example of a trans–trans chain among planar tetra­cyano­nickelate complexes. The coordination geometry of the planar nickel unit is typical of slightly distorted octahedral nickel(II) complexes, but for the [Ni(CN)₄]^2? units, the geometry deviates from a planar configuration due to steric interactions with the ter­pyridine ligands.     

Dynamic Permutational Isomerism in a closo‐Cluster

Permutational isomers of trigonal bipyramidal [W₂RhIr₂(CO)₉(η⁵‐C₅H₅)₂(η⁵‐C₅HMe₄)] result from competitive capping of either a W₂Ir or a WIr₂ face of the tetrahedral cluster [W₂Ir₂(CO)₁₀(η⁵‐C₅H₅)₂] from its reaction with [Rh(CO)₂(η⁵‐C₅HMe₄)]. The permutational isomers slowly interconvert in solution by a cluster metal vertex exchange that is proposed to proceed by Rh?Ir and Rh?W bond cleavage and reformation, and via the intermediacy of an edge‐bridged tetrahedral transition state. The permutational isomers display differing chemical and physical properties: replacement of CO by PPh₃ occurs at one permutational isomer only, while the isomers display distinct optical power limiting behavior.     

Cationic Heterocycles as Ligands: Synthesis and Reactivity with Anionic Nucleophiles of Cationic Triruthenium Clusters Containing C‐Metalated N‐Methylquinoxalinium or N‐Methylpyrazinium Ligands

The cationic cluster complexes [Ru₃(CO)₁₀(μ‐H)(μ‐κ²N,C‐L¹Me)]⁺ ( 3 ⁺; HL¹=quinoxaline) and [Ru₃(CO)₁₀(μ‐H)(μ‐κ²N,C‐L²Me)]⁺ ( 5 ⁺; HL²=pyrazine) have been prepared as triflate salts by treatment of their neutral precursors [Ru₃(CO)₁₀(μ‐H)(μ‐κ²N,C‐Lⁿ)] with methyl triflate. The cationic character of their heterocyclic ligands is responsible for their enhanced tendency to react with anionic nucleophiles relative to that of hydrido triruthenium carbonyl clusters that have neutral N‐heterocyclic ligands. These clusters react instantaneously with methyl lithium and potassium tris‐sec‐butylborohydride (K‐selectride) to give neutral products that contain novel nonaromatic N‐heterocyclic ligands. The following are the products that have been isolated: [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L¹Me₂)] ( 6 ; from 3 ⁺ and methyl lithium), [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L¹HMe)] ( 7 ; from 3 ⁺ and K‐selectride), [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L²Me₂)] ( 8 ; from 5 ⁺ and methyl lithium), and [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L²HMe)] ( 11 ; from 5 ⁺ and K‐selectride). Whereas the reactions of 3 ⁺ lead to products that arise from the attack of the corresponding nucleophile at the C atom of the only CH group adjacent to the N‐methyl group, the reactions of 5 ⁺ give mixtures of two products that arise from the attack of the nucleophile at one of the C atoms located on either side of the N‐methyl group. The LUMOs and the atomic charges of 3 ⁺ and 5 ⁺ confirm that the reactions of these clusters with anionic nucleophiles are orbital‐controlled rather than charge‐controlled processes. The N‐heterocyclic ligands of all of these neutral products are attached to the metal atoms in nonconventional face‐capping modes. Those of compounds 6 – 8 have the atoms of a ligand C?N fragment σ‐bonded to two Ru atoms and π‐bonded to the other Ru atom, whereas the ligand of compound 11 has a C? N fragment attached to a Ru atom through the N atom and to the remaining two Ru atoms through the C atom. A variable‐temperature ¹H NMR spectroscopic study showed that the ligand of compound 7 is involved in a fluxional process at temperatures above ?93 °C, the mechanism of which has been satisfactorily modeled with the help of DFT calculations and involves the interconversion of the two enantiomers of this cluster through a conformational change of the ligand CH₂ group, which moves from one side of the plane of the heterocyclic ligand to the other, and a 180° rotation of the entire organic ligand over a face of the metal triangle.     

C3i‐Symmetric Octanuclear Cadmium Cages: Double‐Anion‐Templated Synthesis,Formation Mechanism,and Properties

A series of C_3i‐symmetric bicapped trigonal antiprismatic Cd₈ cages [2X@Cd₈L₆(H₂O)₆] ? n Y ? solvents (X=Cl^?, Y=NO₃^?, n=2: MOCC‐4 ; X=Br^?, Y=NO₃^?, n=2: MOCC‐5 ; X=NO₃^?, Y=NO₃^?, n=2: MOCC‐6 ; X=NO₃^?, Y=BF₄^?, n=2: MOCC‐7 ; X=NO₃^?, Y=ClO₄^?, n=2: MOCC‐8 ; X=CO₃^2?, n=0: MOCC‐9 ), doubly anion templated by different anions, were solvothermally synthesized by means of a flexible ligand. Interestingly, the CO₃^2? template for MOCC‐9 was generated in situ by two‐step decomposition of DMF solvent. For other MOCCs, spherical or trigonal monovalent anions could also play the role of template in their formation. The template abilities of these anions in the formation of the cages were experimentally studied and are discussed for the first time. Anion exchange of MOCC‐8 was carried out and showed anion‐size selectivity. All of the cage‐like compounds emit strong luminescence at room temperature.     

Rhenium‐Dicarbonyl‐Nitrosyl‐Komplexe mit Imidazol

Rhenium Dicarbonyl‐Nitrosyl Complexes with Imidazole Different rhenium‐dicarbonyl‐nitrosyl complexes with imidazole (Im) as monodentate ligand have been synthesized and characterized, starting from [NEt₄][ReCl₃(CO)₂(NO)] and [ReCl(μ?Cl)(CO)₂(NO)]₂. Whereas the complexes [ReCl₂(Im)(CO)₂(NO)] and [ReCl(Im)₂(CO)₂(NO)]⁺ were achieved in high yields, the complex [Re(Im)₃(CO)₂(NO)]²⁺ with three imidazole ligands could only be isolated after complete removal of all halide ions (with AgBF₄) in low yield. The synthesis of a corresponding ^99mTc‐dicarbonyl‐nitrosyl complex with imidazole opens a new perspective for such compounds as potential radiopharmaceuticals and alternatives to the already established ^99mTc‐tricarbonyl complexes.     

Reactivity of Liquid Ammonia Solutions of the Zintl Phase K12Sn17 towards Mesitylcopper(I) and Phosphinegold(I) Chloride

To gain more insight into the reactivity of intermetalloid clusters, the reactivity of the Zintl phase K₁₂Sn₁₇, which contains [Sn₄]^4? and [Sn₉]^4? cluster anions, was investigated. The reaction of K₁₂Sn₁₇ with gold(I) phosphine chloride yielded K₇[(η²‐Sn₄)Au(η²‐Sn₄)](NH₃)₁₆ ( 1 ) and K₁₇[(η²‐Sn₄)Au(η²‐Sn₄)]₂(NH₂)₃(NH₃)₅₂ ( 2 ), which both contain the anion [(Sn₄)Au(Sn₄)]^7? ( 1 a ) that consists of two [Sn₄]^4? tetrahedra linked through a central gold atom. Anion 1 a represents the first binary Au?Sn polyanion. From this reaction, the solvate structure [K([2.2.2]crypt)]₃K[Sn₉](NH₃)₁₈ ( 3 ; [2.2.2]crypt=4,7,13,16,21,24‐hexaoxa‐1,10‐diazabicyclo[8.8.8]hexacosane) was also obtained. In the analogous reaction of mesitylcopper with K₁₂Sn₁₇ in the presence of [18]crown‐6 in liquid ammonia, crystals of the composition [K([18]crown‐6)]₂[K([18]crown‐6)(MesH)(NH₃)][Cu@Sn₉](thf) ( 4 ) were isolated ([18]crown‐6=1,4,7,10,13,16‐hexaoxacyclooctadiene, MesH=mesitylene, thf=tetrahydrofuran) and featured a [Cu@Sn₉]^3? cluster. A similar reaction with [2.2.2]crypt as a sequestering agent led to the formation of crystals of [K[2.2.2]crypt][MesCuMes] ( 5 ). The cocrystallization of mesitylene in 4 and the presence of [MesCuMes]^? ( 5 a ) in 5 provides strong evidence that the migration of a bare Cu atom into an Sn₉ anion takes place through the release of a Mes^? anion from mesitylcopper, which either migrates to another mesitylcopper to form 5 a or is subsequently protonated to give MesH.     

{2,6‐Bis­[(di­methyl­amino)­methyl]­phenyl‐N2,C1,N6}di­phenyl­tin(II) bromide monohydrate

In the title compound, [Sn(C₆H₅)₂(C₁₂H₁₉N₂)]Br·H₂O, the Sn^IV atom lies on a twofold axis and is coordinated by a C and two N atoms from the 2,6‐bis­[(di­methyl­amino)­methyl]­phenyl ligand in a tridentate fashion and by two phenyl groups. The resulting geometry is intermediate between square pyramidal and trigonal bipyramidal, with three C atoms in equatorial and the two N atoms in axial positions. The main deformation from ideal trigonal‐bipyramidal geometry is seen for the N—Sn—N angle [152.18 (7)°]. The Br^? anion and the water solvate mol­ecule are on an inversion centre and twofold axis, respectively. They form an infinite chain of Br?H—O—H?Br hydrogen bonds [Br?O 3.529 (2) Å] without contributing to the primary coordination sphere of the Sn atom.     

Highly Active,Low‐Valence Molybdenum‐ and Tungsten‐Amide Catalysts for Bifunctional Imine‐Hydrogenation Reactions

The reactions of [M(NO)(CO)₄(ClAlCl₃)] (M=Mo, W) with (iPr₂PCH₂CH₂)₂NH, (PN^HP) at 90 °C afforded [M(NO)(CO)(PN^HP)Cl] complexes (M=Mo, 1a ; W, 1b ). The treatment of compound 1a with KOtBu as a base at room temperature yielded the alkoxide complex [Mo(NO)(CO)(PN^HP)(OtBu)] ( 2a ). In contrast, with the amide base Na[N(SiMe₃)₂], the PN^HP ligand moieties in compounds 1a and 1b could be deprotonated at room temperature, thereby inducing dehydrochlorination into amido complexes [M(NO)(CO)(PNP)] (M=Mo, 3a ; W, 3b ; PNP=(iPr₂PCH₂CH₂)₂N)). Compounds 3a and 3b have pseudo‐trigonal‐bipyramidal geometries, in which the amido nitrogen atom is in the equatorial plane. At room temperature, compounds 3a and 3b were capable of adding dihydrogen, with heterolytic splitting, thereby forming pairs of isomeric amine‐hydride complexes [Mo(NO)(CO)H(PN^HP)] ( 4a(cis) and 4a(trans) ) and [W(NO)(CO)H(PN^HP)] ( 4b(cis) and 4b(trans) ; cis and trans correspond to the position of the H and NO groups). H₂ approaches the Mo/W?N bond in compounds 3a , 3b from either the CO‐ligand side or from the NO‐ligand side. Compounds 4a(cis) and 4a(trans) were only found to be stable under a H₂ atmosphere and could not be isolated. At 140 °C and 60 bar H₂, compounds 3a and 3b catalyzed the hydrogenation of imines, thereby showing maximum turnover frequencies (TOFs) of 2912 and 1120 h^?1, respectively, for the hydrogenation of N‐(4 ‐ methoxybenzylidene)aniline. A Hammett plot for various para‐substituted imines revealed linear correlations with a negative slope of ?3.69 for para substitution on the benzylidene side and a positive slope of 0.68 for para substitution on the aniline side. Kinetics analysis revealed the initial rate of the hydrogenation reactions to be first order in c(cat.) and zeroth order in c(imine). Deuterium kinetic isotope effect (DKIE) experiments furnished a low k_H/k_D value (1.28), which supported a Noyori‐type metal–ligand bifunctional mechanism with H₂ addition as the rate‐limiting step.     

Two Heterometallic–Organic Frameworks Composed of Iron(III)‐Salen‐Based Ligands and d10 Metals: Gas Sorption and Visible‐Light Photocatalytic Degradation of 2‐Chlorophenol

Two examples of heterometallic–organic frameworks (HMOFs) composed of dicarboxyl‐functionalized Fe^III‐salen complexes and d¹⁰ metals (Zn, Cd), [Zn₂(Fe‐L)₂(μ₂‐O)(H₂O)₂] ? 4 DMF ? 4 H₂O ( 1 ) and [Cd₂(Fe‐L)₂(μ₂‐O)(H₂O)₂] ? 2 DMF ? H₂O ( 2 ) (H₄L=1,2‐cyclohexanediamino‐N,N′‐bis(3‐methyl‐5‐carboxysalicylidene), have been synthesized and structurally characterized. In 1 and 2 , each square‐pyramidal Fe^III atom is embedded in the [N₂O₂] pocket of an L^4? anion, and these units are further bridged by a μ₂‐O anion to give an (Fe‐L)₂(μ₂‐O) dimer. The two carboxylate groups of each L^4? anion bridge Zn^II or Cd^II atoms to afford a 3D porous HMOF. The gas sorption and magnetic properties of 1 and 2 have been studied. Remarkably, 1 and 2 show activity for the photocatalytic degradation of 2‐chlorophenol (2‐CP) under visible‐light irradiation, which, to the best of our knowledge, is the first time that this has been observed for Fe^III‐salen‐based HMOFs.     

Mononuclear Co(III), Ni(II) and Cu(II) complexes of tridentate di‐tert‐butylphenylhydrazone: Synthesis,characterization, X‐ray crystal structures,Hirshfeld surface analysis,molecular docking and in vivo anti‐inflammatory activity

A new hydrazone (LH₂) derived from the condensation of 2‐(4‐fluorobenzamido)benzohydrazide with 3,5‐di‐tert‐butyl‐2‐hydroxybenzaldehyde was used to synthesize Co(III), Ni(II) and Cu(II) complexes. These were characterized using various physicochemical, thermal, spectroscopic and single‐crystal X‐ray diffraction techniques. All the complexes crystallize in a monoclinic crystal system with P2₁/n space group and Z = 4. Structural studies of [Co(L)(LH)]?H₂O indicate the presence of both amido and imidol tautomeric forms of the ligand, resulting in a distorted octahedral geometry around the Co(III) ion. On the other hand, in the [Ni(L)(DMF)] and [Cu(L)(H₂O)] complexes, the ligand coordinates to the metal through imidol form resulting in distorted square planar geometry, in which the fourth position is occupied by the oxygen of coordinated DMF in [Ni(L)(DMF)] and by a water molecule in [Cu(L)(H₂O)]. Hirshfeld surface calculations were performed to explore hydrogen bonding and C―H???π interactions. Molecular docking studies were carried out to study the interaction between the synthesized compounds and proteins (cyclooxygenase‐2 and 5‐lipoxygenase). The complexes along with the parent ligand were screened for their in vivo anti‐inflammatory activity, using the carrageenan‐induced rat paw oedema method. The complexes show significant anti‐inflammatory potencies.     

Synthesizing 2D and 3D Selenidostannates in Ionic Liquids: The Synergistic Structure‐Directing Effects of Ionic Liquids and Metal–Amine Complexes

Presented are the ionothermal syntheses, characterizations, and properties of a series of two‐ and three‐dimensional selenidostannate compounds synergistically directed by metal–amine complex (MAC) cations and ionic liquids (ILs) of [Bmmim]Cl (Bmmim=1‐butyl‐2,3‐dimethylimidazolium). Four selenidostannates, namely, 2D‐(Bmmim)₃[Ni(en)₃]₂[Sn₉Se₂₁]Cl ( 1 , en=ethylenediamine), 2D‐(Bmmim)₈[Ni₂(teta)₂(μ‐teta)]Sn₁₈Se₄₂ ( 2 , teta=triethylenetetramine), 2D‐(Bmmim)₄[Ni(tepa)Cl]₂[Ni(tepa)Sn₁₂Se₂₈] ( 3 , tepa=tetraethylenepentamine), and 3D‐(Bmmim)₂[Ni(1,2‐pda)₃]Sn₈Se₁₈ ( 4 , 1,2‐pda=1,2‐diaminopropane), were obtained. Single‐crystal X‐ray diffraction analyses revealed that compounds 1 and 2 possess a lamellar anionic [Sn₃Se₇]_n^2n? structure comprising distinct eight‐membered ring units, whereas 3 features a MAC‐decorated anionic [Ni(tepa)Sn₁₂Se₂₈]_n^6n? layered structure. In contrast to 1 – 3 , compound 4 exhibits a 3D open framework of anionic [Sn₄Se₉]_n^2n?. The structural variation from 1 to 4 clearly indicates that on the basis of the synergistic structure‐directing ability of the MACs and ILs, variation of the organic polyamine ligand has a significant impact on the formation of selenidostannates.     

Extraction of Ternary Alloys: Synthesis and Crystal Structure of [K([2.2.2]crypt)]Cs7[Sn9]2(en)3

The compound [K([2.2.2]crypt)]Cs₇[Sn₉]₂(en)₃ ( 1 ) was synthesized from an alloy of formal composition KCs₂Sn₉ by dissolving in ethylenediamine (en) followed by the addition of [2.2.2]crypt and toluene. 1 crystallizes in the orthorhombic space group Pcca with a = 45.38(2), b = 9.092(4), c = 18.459(8) Å, and Z = 4. The structure consists of Cs₇[Sn₉]₂ layers which contain [Sn₉]^4– anions and Cs⁺ cations. The layers are separated by [K([2.2.2]crypt)]⁺ units. In the intermetallic slab (Cs₇[Sn₉]₂)^– compares the arrangement of pairs of symmetry‐related [Sn₉]^4– anions with the dimer ([Ge₉]–[Ge₉])^6– in [K([2.2.2]crypt)]₂Cs₄([Ge₉]–[Ge₉]), in which the clusters are linked by a cluster‐exo bond. The shortest distance between atoms of such two clusters in 1 is 4.762 Å, e. g. there are no exo Sn‐Sn bonds. The [Sn₉]^4– anion has almost perfect C_4v‐symmetry.