Synthesis and characterization of novel optically active poly(amide-imide)s via direct amidation

N,N′-Pyromelliticdiimido-di-l-methionine (3) was prepared from the reaction of pyromellitic dianhydride (1) with l-methionine (2) in glacial acetic acid and pyridine solution at refluxing temperature. The direct polycondensation reaction of the monomer diimide-diacid (3) with 1,3-phenylenediamine (4a), 1,4-phenylenediamine (4b), 2,6-diaminopyridine (4c), 3,5-diaminopyridine (4d), 4,4′-diaminodiphenylether (4e) and 4,4′-diaminodiphenylsulfone (4f) was carried out in a medium consisting of triphenyl phosphate, N-methyl-2-pyrolidone, pyridine and calcium chloride. The resulting poly(amide-imide)s having inherent viscosities 0.45-0.53 dl g⁻¹ were obtained in high yields and are optically active and thermally stable. All of the above compounds were fully characterized by IR spectroscopy, elemental analyses and specific rotation. Some structural characterization and physical properties of these new optically active poly(amide-imide)s are reported.     

Optical response of phenantroimidazole-dyes covalently linked to a polynorbornene-backbone to acid and base

Two norbornene derivatives bearing phenantroimidazole dyes, namely endo/exo-11-(4-(1H-phenanthro[9,10-d]imidazol-2-yl)phenoxy) undecylbicyclo[2.2.1] hept-5-ene-2-carboxylat (5) and 11-(4-(1-Methyl-1H-phenanthro[9,10-d]imidazol-2-yl)phenoxy) undecylbicyclo[2.2.1]hept-5-ene-2-carboxylate (6) were synthesized. 5 and 6 were used to prepare statistical copolymers with endo,exo-bicyclo[2.2.1.]hept-2-ene-5,6-dicarboxylic acid dimethylester (7) via ring opening metathesis polymerization. The photophysical properties of the monomers and polymers and to what extent polymerization and substitution patterns influence the photophysical properties were investigated. Furthermore, the optical response upon addition of acid was investigated. The emission of monomer 5 shows a small bathochromic shift of 13 nm upon protonation while the emission of the resultant polymer poly5/7 exhibits a large red shift of 62 nm. In contrast, the according methylated monomer 6 and the resulting polymer poly6/7 gave similar absorption and emission characteristics. The differences were attributed to an increased tendency of the non-methylated dyes to interact when brought in close proximity in the polymer.     

Polymerization of ethene with zirconocene catalysts: an experimental and quantum chemical study of the influence of para-substituent in benzyl in bis{η-(1-benzyl)indenyl}zirconium dichlorides

The meso- and rac-like isomers of bis{η⁵-(1-benzyl)indenyl}zirconium dichloride (5), bis{η⁵-(1-para-methoxybenzyl)indenyl}zirconium dichloride (6), bis{η⁵-(1-para-fluoro-benzyl)indenyl}zirconium dichloride (7) and bis{η⁵-(1-phenylethyl)indenyl}zirconium dichloride (8) were synthesized and isolated. Solid-state structures of meso- and rac-like 5 were determined by X-ray structure analysis. Polymerization properties of the methylaluminoxane (MAO) activated diastereomers of complexes 5-8 were studied in ethene polymerizations under different monomer concentrations. The rac-like isomer of 1-phenylethyl-substituted 8/MAO showed significantly higher activity than the 1-benzyl substituted analogs 5-7/MAO. In addition, rac-8/MAO behaves like a single center catalyst producing polyethene with narrow molar mass distribution (1.8-1.9), while diastereomers of 5-7/MAO produce polymers with molar mass distributions varying from 2.7 up to 10.3. The rac and meso-like isomers of 5-7/MAO have different response on the monomer concentration. Quantum chemical calculations suggest a strong interaction between the benzyl substituent and the electron deficient zirconium center. The phenyl metal coordination energies depend on the electronic properties of the para-substituent. In 8/MAO, due to the ethyl spacer, the coordination does not have a significant role and therefore much higher activity and single center polymerization behavior is observed.     

Control of molecular weight distribution in polycondensation polymers 2. Poly(ether ketone) synthesis

Synthesis of aromatic poly(ether ketone) (3) with a narrow molecular weight distribution (M_w/M_n) was investigated via polycondensation. M_ns of 3 could be controlled varying the feed ratio of monomer (1) and initiator (2) maintaining relatively narrow M_w/M_ns (<1.3). The kinetics of polycondensation obeyed a first-order relationship between polycondensation time and -(1/[2]₀) ln([1]/[1]₀), and the rate of polycondensation was estimated as 2.57 mol⁻¹ L h⁻¹. MALDI-TOF mass analysis of 3 indicated that polycondensation should proceed via chain growth manner to give 3 having an initiator unit in each chain end.     

Preparation, characterization, and solution tailored photoluminescence of all trans poly[distyrylbenzene-b-(ethylene oxide)]s

Two linear, stereoregular, and structurally defined PPV derivatives (PPVs), poly[distyrylbenzene-b-(ethylene oxide)]s, with respective 12 and 16 of ethylene oxide repeat units in the backbone, abbreviated as DE-1 and DE-2 thereinafter, have been prepared via a modified synthetic profile. Both DE-1 and -2 were soluble in organic solvents and able to form robust and transparent film upon spin casting. Instrument characterization, such as FTIR, ¹H and ¹³C NMR, UV-vis and fluorescence spectroscopy, revealed the final structures as designed and novel photophysical properties in solution. Apparent spectral evidences strongly suggested the all trans conjugated DE-1 and -2 and the successful isomeirization process adopted. It was found that the aggregates were formed for both DE-1 and -2 at approximately 60% of methanol in methanol/dichloromethane (MeOH/DCM). Both DE-1 and -2 exhibited solution tailorable absorption and emission properties. Before aggregating point, the absorption profile experienced a blue shift with the increase of MeOH and a slight increase in quantum yields (QYs). At aggregating point, however, an apparent blue shift in emission profile was observed along with a remarkable decrease of QY due to aggregate quenching.     

Oxazoline-mediated highly stereoselective synthesis of α,β-substituted-β-aminoalkanamides, potential precursors of unnatural β-amino acids

The reaction of α-lithiated-2-alkyl-2-oxazolines 1-Li with aliphatic, aromatic and heteroaromatic N-cumyl nitrones results in the stereoselective formation of N-cumyl-1,6-dioxa-2,9-diazaspiro[4,4]nonanes 3 which equilibrate with the hydroxylamino derivatives 4. Such equilibrating mixtures can be easily transformed into β-amino alkanamides 5 under reductive conditions, whereas acidic hydrolysis with trifluoroacetic acid (TFA) furnishes high yields of β-phenylamino alkanamides 6 via a cumene hydroperoxide-type rearrangement. Derivatives 5 and 6 provide a backbone of potentially useful unnatural β^2,2,3-amino acids.     

Synthesis and characterization of new soluble and thermally stable aromatic poly(amide-imide)s based on N-[3,5-bis(N-trimellitoyl)phenyl]phthalimide

A new dicarboxylic acid, N-[3,5-bis(N-trimellitoyl)phenyl]phthalimide (1a), bearing three preformed imide rings was synthesized from the condensation of N-(3,5-diaminophenyl)phthalimide and trimellitic anhydride in glacial acetic acid at 1:2 molar ratio. For study of structure-properties relationship 1,3-bis(N-trimellitoyl)benzene (1b, as a reference) was also synthesized in a similar manner. 1a and 1b were characterized by spectroscopic methods and elemental analyses.A series of wholly aromatic poly(amide-imide)s with inherent viscosities of 0.63-1.09 dl g⁻¹ was prepared by triphenyl phosphite-activated polycondensation from the triimide-dicarboxylic acid 1a and the reference monomer 1b with various aromatic diamines. All of the polymers were fully characterized by FT-IR and ¹H NMR spectroscopy. The effects of the phthalimide pendent group on the polymers properties such as solubility, crystallinity, and thermal stability were investigated by comparison of the polymers. The polymers obtained from triimide-dicarboxylic acid 1a exhibited excellent solubility in a variety of solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide, N,N-dimethylformamide, and dimethylsulfoxide. These poly(amide-imide)s possessed glass-transition temperatures from 334 to 403 °C and exhibited excellent thermal stabilities and had 10% weight losses from 541 to 568 °C under a nitrogen atmosphere. Poly(amide-imide)s containing phthalimide pendent groups showed higher solubility, higher T_g and T_d10% values than those having no phthalimide pendent groups.     

Structure-activity relationship study of flowering-inducer FN against Lemna paucicostata

FN1 (1) and FN2 (2), cycloadducts of α-ketol octadecadienoic acid (3) with norepinephrine (NE), induce flowering in Lemna paucicostata. In order to broaden our understanding of structural requirements of FN for flower induction, nine analogs of 3 (4-12) were synthesized and reacted with NE under basic conditions. These analogs, except for 8, 10, and 12, exhibited significant activity regarding to floral induction in L. paucicostata. Similar experiments were carried out by using 3 and epinephrine, and it was demonstrated that these products also possessed biological activity.     

Synthesis of organosilicon polymers by using the Lewis-acid-catalyzed trans-allylsilylation of alkynes

The HfCl₄ catalyzed polymerization of allyl(4-ethynylphenyl)dimethylsilane (1a) proceeded smoothly to give poly[dimethyl-(1,4-pentadienyl)phenylsilane] (2a), and the HfCl₄ catalyzed reaction of 1-allyl-2-(4-ethynyphenyl)-1,1,2,2-tetramethyldisilane (1b) afforded poly[1,1,2,2-tetramethyl-1-(1,4-pentadienyl)-2-phenyldisilane] (2b). These polymerization reactions proceeded via the stereoselective trans-allylsilylation of the 4-ethynyl group attached to the aromatic ring.     

Synthesis and characterizations of free base and Cu(II) complex of a porphyrin sheet

Free base porphyrin sheet 5 was prepared by demetalation of zinc complex 1, which was now more conveniently prepared in 30% yield by oxidation of a mixture of tetraporphyrins, 8, 9, and 11. The ¹H NMR spectrum of 5 shows no indication of an aromatic ring current for the porphyrin rings and evidences the freezing of the pyrrolic NH protons at the most inner and outer corner positions, both of which contrast sharply with strong aromatic ring currents and rapid NH tautomerism of normal porphyrins. DFT calculations supported the experimental results, suggesting that the enforced planar COT core causes these unique properties. The free base 5 was transformed into Cu(II) complex 6 that exhibits antiferromagnetic interaction among the Cu(II) ions with J=−1.16 cm⁻¹.     

Rapid access to epothilone analogs via semisynthetic degradation and reconstruction of epothilone D

A facile and efficient route to epothilone analogs has been developed from the natural product epothilone D (1). Degradation of 1 via an oxidative cleavage sequence provides acid intermediate 4 rapidly in six steps. From 4, a variety of epothilone analogs have been prepared utilizing ring-closing metathesis to reconstruct the trisubstituted-12,13-double bond. Using this approach, we report a number of epothilone analogs with varying C-15 aromatic side chains and C-14 allylic substitutions and their biological activities.     

Self-assembly of a new series of quadruply hydrogen bonded heterotrimers driven by the donor-acceptor interaction

This paper describes the self-assembly of a new series of heterotrimers in chloroform-d by utilizing the cooperative interaction of hydrogen bonding and donor-acceptor interaction. Compounds 1 and 11, in which an 2-ureido-4[1H]-pyrimidinone unit is connected to 34-crown-10 or 36-crown-10, were used as donor monomer, and 2 and 19, in which an 2-ureido-4[1H]-pyrimidinone unit is connected to NDI, were used as acceptor monomer, while linear compound 4, which contains two diamido-1,8-naphthyridines, was used as template. A large tri-p-(t-butyl)phenylmethoxyl group was introduced to 19 in order to compare its assembling behavior with that of 2. Mixing 4 with dimer 1·2 caused 1·2 to fully decompose and to afford 55% of ‘in-in’-oriented heterotrimer 1·4·2. Adding 4 to the solution of 2·11 or 11·19 in chloroform-d also led to full dissociation of the dimers. However, in these systems the ‘in-in’-arranged heterotrimer 2·4·11 or 11·4·19 could be produced exclusively.     

Effects of chemical variations on the mesophase behavior of new fluorinated poly(vinylcyclopropane)s

Several new structures of fluorinated polymers poly(1)-poly(9) were prepared by free radical ring opening polymerization of vinylcyclopropane monomers 1-9 containing different fluorinated side groups of the type (CH₂)_n(CF₂)_pF. While in poly(1)-poly(3) p varied from 6 to 10 for a fixed n=2, in poly(4)-poly(6) n increased from 3 to 5 at the given p=8. In poly(7) and poly(8) a phenyl ring was incorporated to elongate the mesogenic side group (n=2; p=6 and 8, respectively), that was further separated from the polymer backbone by a methylene spacer (m=11) in poly(9). Therefore, the effects of various chemical variations of the polymer structure on the mesophase behavior could be assessed. The polymers were in fact co-polymers comprising both 1,5-linear and cyclobutane-ring isomer units. In any case they formed smectic mesophase(s) owing to the special character of the perfluorinated chains. The order and the isotropization temperature (T_i) of the mesophase were enhanced by increasing p, but T_i lowered with increasing n. Extension of the side group by insertion of a phenyl ring improved T_i. Wide angle X-ray diffraction studies clarified the nature of the different smectic phases, the occurrence of which was discussed in terms of the ability of the fluorinated side groups to pack antiparallel in either a partly or fully interdigitated structure. Co-polymers of 3 with a non-mesogenic, not fluorinated co-monomer 10 were also prepared with different chemical compositions. Co-polymerization was found to be another effective means of modifying the mesophase behavior of the poly(vinylcyclopropane)s.     

Novel prenylated and geranylated aromatic compounds isolated from Polysphondylium cellular slime molds

We have studied the diversity of secondary metabolites of cellular slime molds to utilize them as new biological resources for natural product chemistry. From the methanol extract of fruiting bodies of Polysphondylium tenuissimum, we obtained five prenylated and geranylated aromatic compounds, Pt-1-5 (1-5). An additional aromatic compound, Ppc-1 (6), was isolated from Polysphondylium pseudo-candidum. The structures of these compounds were determined by spectral analysis, and synthetic routes to 4, 5, and 6 were developed. Compound 5 showed the glucose consumption-promotive activity on 3T3-L1 cells.     

Intensely blue-fluorescent 2,5-bis(benzoimidazol-2-yl)pyrazine dyes with improved solubility: their synthesis, fluorescent properties, and application as microenvironment polarity probes

In order to improve the solubility of intensively fluorescent 2,5-bis(benzimidazol-2-yl)pyrazine (BBIP), we synthesized new BBIP derivatives (2, 3a,b, and 5a,b) possessing two alkyl chains at the N-1 and N-1′ positions of the two benzimidazole moieties. Characterization of these compounds demonstrated that they exhibit high fluorescence intensity even in protic solvents, as well as solvatochromic fluorescence, in which their fluorescence maxima in aqueous methanol exhibited bathochromic shift with increasing ?_r value of the medium. We utilized 5a as a microenvironment polarity probe to indicate the variation in polarity around the backbone of the temperature-sensitive poly(N-isopropylacrylamide) by measuring the spectral change caused by the thermal phase transition of the polymer.     

Polyketides produced by Daldinia loculata cultured from Northern Manitoba

The fungus present in a soil sample collected from Northern Manitoba was cultured. The natural products produced by this organism were isolated and identified as the polyketides (1), (2), (3). A trace amount of the aromatic alcohol tyrosol (4) was also isolated. This organism was identified as Daldinia loculata by sequencing of the internally transcribed spacer region of the nuclear ribosomal DNA. The polyketides 1-3 were assayed against E. coli and it was observed that 1 displayed mild antibiotic activity.     

Microwave-promoted synthesis of new optically active poly(ester-imide)s derived from N,N-(pyromellitoyl)-bis-l-leucine diacid chloride and aromatic diols

Pyromellitic dianhydride (benzene-1,2,4,5-tetracarboxylic dianhydride) (1) was reacted with l-leucine (2) in a mixture of acetic acid and pyridine (3:2) and the resulting imide-acid [N,N^′-(pyromellitoyl)-bis-l-leucine diacid] (4) was obtained in quantitative yield. The compound (4) was converted to the N,N^′-(pyromellitoyl)-bis-l-leucine diacid chloride (5) by reaction with thionyl chloride. A new facile and rapid polycondensation reaction of this diacid chloride (5) with several aromatic diols such as phenol phthalein (6a), bisphenol-A (6b), 4,4^′-hydroquinone (6c), 1,8-dihydroxyanthraquinone (6d), 1,5-dihydroxy naphthalene (6e), 4,4-dihydroxy biphenyl (6f), and 2,4-dihydroxyacetophenone (6g) was developed by using a domestic microwave oven in the presence of a small amount of a polar organic medium such as o-cresol. The polymerization reactions proceeded rapidly and are completed within 10 min, producing a series of optically active poly(ester-imide)s (PEIs) with good yield and moderate inherent viscosity of 0.10-0.27 dl/g. All of the above polymers were fully characterized by IR, elemental analyses and specific rotation. Some structural characterization and physical properties of these optically active PEIs are reported.     

A new class of aromatic poly(ether-ketone benzoxazole) copolymers by nucleophilic polycondensation: Synthesis and properties

A number of difluorophenyl benzoxazole (DB) monomers and 4,4′-difluorobenzophenone (DFB) were subjected to fluoro-displacement with two different phenoxides in a polar aprotic solvent. A series of novel poly(ether-ketone benzoxazole) copolymers (PAEKBOs) were more readily prepared, in which the generation of aryl-ether linkages was the copolymer forming reaction. The effects of monomer structure and polymerization conditions on the polymerization results and polymer solubility were analyzed. Copolymers 1, 2-X, 4 and 6 were obtained with high molecular weight. Copolymers 2-X and 4 showed organic solubility, especially the copolymers 2-X could dissolve in many usual organic solvents at the solid concentration of up to 20 wt%. TGA and DSC measurements confirmed that the copolymers 2-X, 4 and 6 were thermally stable up to 500 °C, and showed single enhanced T_gs and an amorphous morphology. The copolymers behaved in many respects as engineering thermoplastics. The properties and the processability of several members of the PAEKBOs offer the prospect of being candidates to substitute poly(ether-ether-ketone) (PEEK) using in a wider usage temperature range and being high performance materials for many applications as films, coatings for optical and electronic devices and gas separation membranes.     

Combined biotransformations of 4(20),11-taxadienes

Taxuyunnanine C (1) and its analogs (2 and 3), the C-14 oxygenated 4(20), 11-taxadienes from callus cultures of Taxus sp., were regio- and stereo-selectively hydroxylated at the 7β position by a fungus, Abisidia coerulea IFO 4011, and it was interesting that the longer the alkyl chain of the acyloxyl group at C-14 became, the higher the yield of 7β-hydroxylated product was. Besides the three 7β-hydroxylated products (5, 9, 17), other nine new products (7, 11, 12, 14, 15, 16, 18, 20 and 21) and six known products (4, 6, 8, 10, 13 and 19) were obtained. Subsequently, the acetylated derivatives (24 and 27) of 7β-and 9α-hydroxylated products of 1 were regio- and stereo-specifically hydroxylated at the 9α position by Ginkgo cells and 7β position by A. coerulea, respectively. Thus, the two specific oxidations have been combined. These bioconversions would provide not only valuable intermediates for the semi-synthesis of paclitaxel or other bioactive taxoids from 1 and its analogs, but also some useful hints for the biosynthetic pathway of taxoid in the natural Taxus plant.     

Pheromone synthesis. Part 255: Synthesis and GC–MS analysis of pheromonal triacylglycerols of male Drosophila fruit flies

Pheromonal triacylglycerols and their analogs, 1A, 1B, 2A, 2B, 3A, 3B, and 3C, of male Drosophila fruit flies were synthesized and analyzed by GC–MS. Their GC retention times were found to be a reliable measure to analyze and identify these triacylglycerols with acetyl, oleoyl and tigloyl groups, although the stereo- and regioisomers of 1 (1A and 1B), 2 (2A and 2B), and 3 (3A, 3B, and 3C) could not be distinguished from each other by MS alone.