Application of Nanocrystalline Graphite‐like Pyrolytic Carbon Film Electrode in the Electroanalytical Determination of Famotidine

Direct electro‐oxidation of famotidine at different graphitic carbon‐based electrode materials was evaluated. These materials included conventional electrodes of edge‐plane pyrolytic graphite, basal‐plane pyrolytic graphite, carbon paste, and glassy carbon as well as nano‐structured carbon‐based materials such as pyrolytic carbon film, carbon nanotube, and nano‐graphene. Raman spectroscopy and scanning electron microscopy were employed to analyze their structural and morphological features. It was found that the pyrolytic carbon film electrode, after a simple and fast anodic activation, shows superior electroanalytical performance. The method was successfully applied for the electroanalytical determination of famotidine in tablet dosage forms and urine samples.     

Direct Oxidation of Ascorbic Acid at an Edge Plane Pyrolytic Graphite Electrode: A Comparison of the Electroanalytical Response with Other Carbon Electrodes

The direct electrochemical oxidation of ascorbic acid at an edge plane pyrolytic graphite electrode (EPPG) is investigated and compared with other common carbon‐based electrodes, specifically glassy carbon, boron doped diamond and basal plane pyrolytic graphite. It is found that the EPPG electrode shows a significantly higher degree of electrochemical reversibility than the other electrode substrates giving rise to an analytically optimized limit of detection and sensitivity of 7.1×10^?5 M and 0.065 A M^?1 respectively.     

Edge Plane Pyrolytic Graphite Electrodes for Halide Detection in Aqueous Solutions

The behavior of chloride, bromide and iodide at edge plane pyrolytic graphite electrodes has been explored in aqueous acid solutions. The voltammetric response in each case has been compared with that of basal plane pyrolytic graphite, glassy carbon and boron‐doped diamond. The electrochemical oxidation of chloride is found to only occur on boron‐doped diamond while the electrochemical reversibility for the oxidation of bromide on edge plane pyrolytic graphite is similar to that seen at glassy carbon whilst being superior to basal plane pyrolytic graphite and boron‐doped diamond. In the case of iodide oxidation, edge plane and basal plane pyrolytic graphite and glassy carbon display similar electrode kinetics but are all superior to boron‐doped diamond. The analytical possibilities were examined using the edge plane pyrolytic graphite electrode for both iodide and bromine where is was found that, based on cyclic voltammetry, detection limits in the order of 10^?6 M are possible.     

The Direct Electrochemical Oxidation of Ammonia in Propylene Carbonate: A Generic Approach to Amperometric Gas Sensors

The direct electrochemical oxidation of ammonia in propylene carbonate is reported for the first time. The voltammetric responses at glassy carbon, boron‐doped diamond, edge and basal plane pyrolytic graphite electrodes are explored and compared with the outcome indicating that the optimum electrode substrate for analytical purposes in this solvent is glassy carbon. Proof‐of‐concept is shown for the amperometric detection of ammonia using basal plane pyrolytic graphite electrodes abrasively modified with glassy carbon spheres. Given the significantly lower vapor pressure of propylene carbonate in comparison to water the implications for extending the life‐time of practical sensors are evident. Propylene carbonate shows a wide potential window with glassy carbon electrodes permitting this approach to be used for a potential diversity of gaseous analytes.     

Simultaneous electrochemical sensing of ascorbic acid,dopamine and uric acid at anodized nanocrystalline graphite-like pyrolytic carbon film electrode

Nanocrystalline graphite-like pyrolytic carbon film (PCF) electrode fabricated by a non-catalytic chemical vapor deposition (CVD) process was used for the simultaneous electrochemical sensing of ascorbic acid (AA), dopamine (DA), and uric acid (UA). The electrode was studied with respect to changes in electrocatalytic activity caused by a simple and fast electrochemical pretreatment. The anodized electrode exhibited excellent performance compared to many chemically modified electrodes in terms of detection limit, linear dynamic range, and sensitivity. Differential pulse voltammetry (DPV) was used for the simultaneous determination of ternary mixtures of DA, AA, and UA. Under optimum conditions, the detection limits were 2.9 μM for AA, 0.04 μM for DA, and 0.03 μM for UA with sensitivities of 0.078, 5.345, and 6.192 A M⁻¹, respectively. The peak separation was 219 mV between AA and DA and 150 mV between DA and UA. No electrode fouling was observed and good reproducibility was obtained in all the experiments. The sensor was successfully applied for the assay of DA in an injectable drug and UA in human urine by using standard addition method.     

A Comparison of Electron Transfer Kinetics of Three Common Carbon Electrode Surfaces in Acetonitrile and in Room Temperature Ionic Liquid 1‐Butyl‐3‐Methylimidiazonium Hexafluorophosphate: Correlation to Surface Structure and the Limit of the Diffusion Domain Approximation

We report the comparison of electron transfer kinetic parameters of the ferrocene redox couple in both acetonitrile and in room temperature ionic liquid (RTIL) 1‐butyl‐3‐methylimidiazonium hexafluorophosphate ([C₄mim] [PF₆]), using edge plane pyrolytic graphite (EPPG), basal plane pyrolytic graphite (BPPG) and glassy carbon (GC) electrodes. Each electrode surface was characterized using SEM and AFM and the surface morphology was analyzed in terms of surface heterogeneity including the distribution of edge plane defects. The experimental data were modeled using both one and two dimensional simulations to correlate the electron transfer parameters obtained with the different surface structure of each electrode. Furthermore, we show that the diffusion domain approximation (commonly used to accurately simulate electron transfer kinetics at graphitic surfaces) breaks down when a BPPG electrode is used in RTIL and demonstrate the near impossibility of assigning rate constant to the basal plane surface.     

Edge Plane Pyrolytic Graphite Electrodes for Stripping Voltammetry: a Comparison with Other Carbon Based Electrodes

The first examples of using edge plane pyrolytic graphite electrodes for anodic and cathodic stripping voltammetry (ASV and CSV) are presented, notably the ASV of silver and the CSV of manganese. In the former example, detection limits for silver (based on 3σ) of 8.1 nM and 0.185 nM for 120 s and 300 s accumulation time, respectively, were achievable using the edge plane electrode, which were superior to those observed on glassy carbon, basal plane pyrolytic graphite and boron‐doped diamond electrodes. In the second example, a detection limit for manganese of 0.3 μM was possible which was comparable with that achievable with a boron‐doped diamond electrode but with an increased sensitivity. Comparison of the edge plane pyrolytic graphite electrode with boron‐doped diamond electrodes reveals that the edge plane electrode has comparable detection limits and sensitivities whilst exhibiting a lower signal‐to‐noise ratio and large potential window for use in trace analysis suggesting boron‐doped diamond can be conveniently replaced by edge plane pyrolytic graphite as an electrode material in many applications.     

Abrasive immobilization of carbon nanotubes on a basal plane pyrolytic graphite electrode: application to the detection of epinephrine

The performance of a basal plane pyrolytic graphite (bppg) electrode modified with carbon nanotubes is described. Abrasive immobilization of multiwall carbon nanotubes on a bppg electrode was achieved by gently rubbing the electrode surface on a filter paper supporting carbon nanotubes. The resulting electrode showed excellent mediation of epinephrine oxidation: a decrease in the overvoltage of the epinephrine electro-oxidation (200-500 mV) was observed as well as a dramatic increase in the peak current (4 times) compared to that seen at a bare bppg electrode. The oxidation peaks of epinephrine and ascorbic acid which overlap on bare bppg electrode were separated successfully (by ca. 220 mV) at the surface of the modified bppg electrode. The modified electrode showed good stability in comparison to most modified carbon nanotubes electrodes prepared by alternative methods.     

Exploration of gas sensing possibilities with edge plane pyrolytic graphite electrodes: nitrogen dioxide detection

The voltammetric response of nitrogen dioxide in aqueous sulfuric acid using an edge plane pyrolytic graphite electrode has been explored and contrasted with that from basal plane pyrolytic graphite, glassy carbon or boron-doped diamond electrodes. Edge plane graphite electrode is found to produce an excellent voltammetric signal in comparison with other carbon-based electrodes exhibiting a well-defined analytically useful voltammetric redox couple in 2.5 M sulfuric acid which is absent on the alternative electrodes.     

Electroanalytical Exploitation of Nitroso Phenyl Modified Carbon‐Thiol Interactions: Application to the Low Voltage Determination of Thiols

The electrochemical generation of nitrosophenyl groups covalently attached to graphite powder (nitrosophenylcarbon) from carbon powder chemically modified with nitrophenyl groups and their subsequent reaction with thiols (glutathione, cysteine and homocysteine) has been investigated as a method by which the later can be quantified. The modified carbon powder was immobilized onto a basal plane pyrolytic graphite electrode and characterized by cyclic voltammetry by scanning between 1.0 V and ?1.0 V vs. SCE in phosphate buffer (pH 7). Square wave voltammetry (SWV) was used for the determination of thiols and the SWV parameters were optimized. The nitrosophenylcarbon is electrogenerated from nitrophenylcarbon and can chemically oxidize thiols to disulfides. Subsequent reduction of nitrosophenylcarbon to phenylhydroxylaminecarbon during the square wave voltammetric process leads to a decrease in the reductive current. This can be correlated to the concentration of thiol present within the medium. The cyclic voltammetric responses of basal plane pyrolytic graphite electrode, edge plane pyrolytic graphite electrode, glassy carbon electrode and boron‐doped diamond electrode in the direct oxidation of thiols were also investigated and all were found to have a significantly higher overpotential compared to the described method using nitrosophenylcarbon.     

Exploring the electrocatalytic sites of carbon nanotubes for NADH detection: an edge plane pyrolytic graphite electrode study

The electrocatalytic properties of multi-walled carbon nanotube modified electrodes toward the oxidation of NADH are critically evaluated. Carbon nanotube modified electrodes are examined and compared with boron-doped diamond and glassy carbon electrodes, and most importantly, edge plane and basal pyrolytic graphite electrodes. It is found that CNT modified electrodes are no more reactive than edge plane pyrolytic graphite electrodes with the comparison with edge plane and basal plane pyrolytic graphite electrodes allowing the electroactive sites for the electrochemical oxidation of NADH to be unambiguously determined as due to edge plane sites. Using these highly reactive edge plane sites, edge plane pyrolytic graphite electrodes are examined with cyclic voltammetry and amperometry for the electroanalytical determination of NADH. It is demonstrated that a detection limit of 5 microM is possible with cyclic voltammetry or 0.3 microM using amperometry suggesting that edge plane pyrolytic graphite electrodes can conveniently replace carbon nanotube modified glassy carbon electrodes for biosensing applications with the relative advantages of reactivity, cost and simplicity of preparation. We advocate the routine use of edge plane and basal plane pyrolytic graphite electrodes in studies utilising carbon nanotubes particularly if 'electrocatalytic' properties are claimed for the latter.     

Exploration of Stable Sonoelectrocatalysis for the Electrochemical Reduction of Oxygen

A series of modified electrodes were prepared both via solvent evaporation and electrochemical cycling of azobenzene and derivatives and various quinones and assessed for their suitability as oxygen reduction electrocatalysts and sonoelectrocatalysts. Glassy carbon electrodes were modified via solvent evaporation with 1,2‐dihydroxyanthraquinone and 1,2‐diazonium‐9,10‐anthraquinone while edge plane and basal plane pyrolytic graphite electrodes were modified by the same procedure with 9,10‐phenanthraquinone. The stability of the attached moiety was accessed in each case under ultrasound. For comparison the same electrode substrates were modified with 9,10‐phenanthraquinone by electrochemical cycling and also exposed to ultrasound. The observed results suggest the use of the glassy carbon electrodes modified with azobenzene and derivatives via solvent evaporation as the optimal carbon based sonoelectrocatalysts for oxygen reduction in term of stability under insonation and high catalytic rate.     

Electrochemical Investigations of the Anticancer Drug Idarubicin Using Multiwalled Carbon Nanotubes Modified Glassy Carbon and Pyrolytic Graphite Electrodes

The effect of surface modifications on the electrochemical behavior of the anticancer drug idarubicin was studied at multiwalled carbon nanotubes modified glassy carbon and edge plane pyrolytic graphite electrodes. The surface morphology of the modified electrodes was characterized by scanning electron microscopy. The modified electrodes were constructed for the determination of idarubicin using adsorptive stripping differential pulse voltammetry. The experimental parameters such as supporting electrolyte, pH, accumulation time and potential, amount of carbon nanotubes for the sensitive assay of idarubicin were studied as details. Under the optimized conditions, idarubicin gave a linear response in the range 9.36×10^?8–1.87×10^?6 M for modified glassy carbon and 9.36×10^?8–9.36×10^?7 M for modified edge plane pyrolytic graphite electrodes. The detection limits were found as 1.87×10^?8 M and 3.75×10^?8 M based on modified glassy carbon and edge plane pyrolytic graphite electrodes, respectively. Interfering species such as ascorbic acid, dopamine, and aspirin showed no interference with the selective determination of idarubicin. The analyzing method was fully validated and successfully applied for the determination of idarubicin in its pharmaceutical dosage form. The possible oxidation mechanism of idarubicin was also discussed. The results revealed that the modified electrodes showed an obvious electrocatalytic activity toward the oxidation of idarubicin by a remarkable enhancement in the current response compared with bare electrodes.     

Electroanalytical determination of cadmium(II) and lead(II) using an in-situ bismuth film modified edge plane pyrolytic graphite electrode.

A highly sensitive and simple electroanalytical methodology is presented using an in-situ bismuth film modified edge plane pyrolytic graphite electrode (BiF-EPPGE) which is exemplified with the simultaneous determination of cadmium(II) and lead(II). Square-wave anodic stripping voltammetry is utilised with the effects of several experimental variables studied. Simultaneous additions of cadmium(II) and lead(II) were investigated where two linear ranges between 0.1-100 and 0.1-300 microg/L and also detection limits of 0.062 and 0.084 microg/L were obtained, respectively. The method was then successfully applied to the simultaneous determination of cadmium(II) and lead(II) in spiked river water, where recoveries of 100.5 and 98% were obtained, respectively. This electroanalytical protocol using edge plane pyrolytic graphite electrodes is one of the simplest methodologies to date using non-mercury based electrodes and is simpler and cheaper than alternatives such as carbon nanotube electrode arrays, suggesting the use of edge plane pyrolytic graphite electrode for routine sensing.     

Application of anodized edge-plane pyrolytic graphite electrode for analysis of clindamycin in pharmaceutical formulations and human urine samples

Different graphitic carbon-based electrode materials were evaluated for direct electro-oxidation of clindamycin and electroanalytical parameters such as sensitivity, residual background current, and signal-tobackground current ratio were compared to select the best one for the clindamycin electroanalysis. Such electrode materials include glassy carbon, carbon paste, pyrolytic graphite (edge-plane and basal-plane), carbon nanotube, reduced graphene oxide, and carbon black. The edge-plane pyrolytic graphite electrode after a simple and fast electrochemical pretreatment showed superior performance compared with the other carbon electrodes. Raman and Fourier transform infrared spectroscopy were employed to analyze the surface microstructure and chemical bonding of the carbon materials and scanning electron microscopy was used to study their surface morphologic features. The applicability of the electrochemically activated edge-plane pyrolytic graphite electrode for the determination of clindamycin in pharmaceutical formulations and human urine samples was evaluated.     

Electrocatalytic detection of thiols using an edge plane pyrolytic graphite electrode

The first example of using an edge plane pyrolytic graphite electrode in electroanalysis is reported as the determination of homocysteine, N-acetylcysteine, cysteine and glutathione is studied. The response of the electrode in the direct oxidation of thiol moieties is explored and found to be electrocatalytic producing a reduction in the overpotential while having enhanced signal-to-noise characteristics compared to glassy carbon and basal plane pyrolytic graphite electrodes. The effectiveness of the methodology is examined in the determination of cysteine species in a growth tissue media that contains a high number of common biological interferences. The advantageous properties of this electrode for thiol determination lie in its excellent catalytic activity, sensitivity and simplicity.     

Anodic stripping voltammetry of antimony at unmodified carbon electrodes

Antimony is an element of significant environmental concern, yet has been neglected relative to other heavy metals in electroanalysis. As such very little research has been reported on the electroanalytical determination of antimony at unmodified carbon electrodes. In this paper we report the electrochemical determination of Sb(III) in HCl solutions using unmodified carbon substrates, with focus on non-classical carbon materials namely edge plane pyrolytic graphite (EPPG), boron doped diamond (BDD) and screen-printed electrodes (SPE). Using differential pulse anodic stripping voltammetry, EPPG was found to give a considerably greater response towards antimony than other unmodified carbon electrodes, allowing highly linear ranges in nanomolar concentrations and a detection limit of 3.9?nM in 0.25?M HCl. Furthermore, the sensitivity of the response from EPPG was 100 times greater than for glassy carbon (GC). Unmodified GC gave a comparable response to previous results using the bare substrate, and BDD gave an improved, yet still very high limit of detection of 320?nM compared to previous analysis using an iridium oxide modified BDD electrode. SPEs gave a very poor response to antimony, even at high concentrations, observing no linearity from standard additions, as well as a major interference from the ink intrinsic to the working electrode carbon material. Owing to its superior performance relative to other carbon electrodes, the EPPG electrode was subjected to further analytical testing with antimony. The response of the electrode for a 40?nM concentration of Sb(III) was reproducible with a mean peak current of 1.07?µA and variation of 8.4% (n?=?8). The effect of metals copper, bismuth and arsenic were investigated at the electrode, as they are common interferences for stripping analysis of antimony.     

A simple electroanalytical methodology for the simultaneous determination of dopamine,serotonin and ascorbic acid using an unmodified edge plane pyrolytic graphite electrode

A simple method using an unmodified edge plane pyrolytic graphite electrode (EPPGE) is reported for the simultaneous determination of dopamine (DA), serotonin (ST) and ascorbic acid (AA). The performance of this electrode is superior to other unmodified carbon-based electrodes and also to many modified electrodes in terms of detection limit, sensitivity and peak separation for determination of DA, ST and AA. Using this method, detection limits of 90 nM, 60 nM and 200 nM were obtained for DA, ST and AA respectively. No electrode fouling is observed during a set of experiments and good sensitivity is obtained for the simultaneous determination of DA, ST and AA. The peaks for the three species are well resolved from each other and the electrode is successfully utilised for their determination in standard and real samples.      

Physical adsorption of N,N'-diphenyl-p-phenylenediamine onto carbon particles: application to the detection of sulfide

The derivatisation of carbon powder by physical adsorption of N,N'-diphenyl-p-phenylenediamine (DPPD) onto the surface of graphite particles (1-2 microm diameter) results in usefully functionalised carbon. The derivatised carbon powders have been studied using cyclic voltammetry by (i) abrasive immobilisation of the powder onto a basal plane pyrolytic graphite electrode (bppg) and (ii) by the manufacture of carbon-epoxy electrodes containing the derivatised carbon. The electrochemical response of the DPPD modified carbon has been examined in the presence of sulfide and possible reactions identified for the behaviour of each electrode substrate. The analytical application of the carbon-epoxy electrode for the sensing of sulfide is reported.     

The Electrocatalytic Properties of Arc‐MWCNTs and Associated ‘Carbon Onions’

For the first time we report on the electrochemical characteristics of nanometer sized polyhedral graphite onions dispersed amongst arc‐MWCNTs. These are formed during the electric arc discharge method of producing ultrapure MWCNTs (arc‐MWCNTs). The carbon onions are randomly dispersed amongst the arc‐MWCNTs which are produced with very little amorphous carbon deposits or other unwanted impurities and are formed as closed‐ended tubes. By comparison with commercially available open‐ended hollow‐tube multiwalled carbon nanotubes made using the chemical vapor deposition method (cvd‐MWCNTs), a glassy carbon electrode (GCE), an edge‐plane pyrolytic graphite electrode (eppg) and basal plane pyrolytic graphite (bppg) electrode, we can speculate that it is the edge‐plane‐like defect sites that are the electroactive sites responsible for the apparent ‘electrocatalysis’ seen with a wide range of analytes including: ferrocyanide, ruthenium hexaamine(III), nicotinamide adenosine dinucleotide (NADH), epinephrine, norepinephrine, cysteine, and glutathione. The arc‐MWCNTs themselves are produced as closed‐ended tubes with very few, if any, edge‐plane‐like defect sites evident in their HRTEM characterization. Therefore we speculate that it is the carbon onions dispersed amongst the arc‐MWCNTs which have incomplete graphite shells or a rolled‐up ‘Swiss‐roll’ structures that posses the edge‐plane‐like defect sites and are responsible for the observed voltammetric responses. Carbon onions are no more or no less ‘electrocatalytic’ than open‐ended MWCNTs which in turn are no more electrocatalytic than an eppg electrode. As the carbon onions are ubiquitous in MWCNTs formed using the arc‐discharge method the authors advise that caution should be taken before assigning any electrocatalytic behavior to the MWCNTs themselves as any observed electrocatalysis likely arises from the carbon onion impurities.