An ATR‐FTIR Study on the Effect of Molecular Structural Variations on the CO2 Absorption Characteristics of Heterocyclic Amines,Part II

This paper reports on an ATR‐FTIR spectroscopic investigation of the CO₂ absorption characteristics of a series of heterocyclic diamines: hexahydropyrimidine (HHPY), 2‐methyl and 2,2‐dimethylhexahydropyrimidine (MHHPY and DMHHPY), hexahydropyridazine (HHPZ), piperazine (PZ) and 2,5‐ and 2,6‐dimethylpiperazine (2,6‐DMPZ and 2,5‐DMPZ). By using in situ ATR‐FTIR the structure–activity relationship of the reaction between heterocyclic diamines and CO₂ is probed. PZ forms a hydrolysis‐resistant carbamate derivative, while HHPY forms a more labile carbamate species with increased susceptibility to hydrolysis, particularly at higher CO₂ loadings (>0.5 mol CO₂/mol amine). HHPY exhibits similar reactivity toward CO₂ to PZ, but with improved aqueous solubility. The α‐methyl‐substituted MHHPY favours HCO₃^? formation, but MHHPY exhibits comparable CO₂ absorption capacity to conventional amines MEA and DEA. MHHPY show improved reactivity compared to the conventional α‐methyl‐ substituted primary amine 2‐amino‐2‐methyl‐1‐propanol. DMHHPY is representative of blended amine systems, and its reactivity highlights the advantages of such systems. HHPZ is relatively unreactive towards CO₂. The CO₂ absorption capacity C_A (mol CO₂/mol amine) and initial rates of absorption R_IA (mol CO₂/mol amine min^?1) for each reactive diamine are determined: PZ: C_A=0.92, R_IA=0.045; 2,6‐DMPZ: C_A=0.86, R_IA=0.025; 2,5‐DMPZ: C_A=0.88, R_IA=0.018; HHPY: C_A=0.85, R_IA=0.032; MHHPY: C_A=0.86, R_IA=0.018; DMHHPY: C_A=1.1, R_IA=0.032; and HHPZ: no reaction. Calculations at the B3LYP/6‐31+G** and MP2/6‐31+G** calculations show that the substitution patterns of the heterocyclic diamines affect carbamate stability, which influences hydrolysis rates.     

Synthese von neuen (Phenylalkyl)aminen zur Untersuchung von Struktur‐Aktivitätsbeziehungen,Mitteilung 1, Mescalin Derivate

Synthesis of Novel (Phenylalkyl)amines for the Investigation of Structure–Activity Relationships. Part 1. Mescalin Derivatives . The synthesis and the spectroscopic data of 14 novel 4‐substituted mescaline derivatives are reported. Starting from syringaldehyde (=4‐hydroxy‐3,5‐dimethoxybenzaldehyde), several ethers were obtained from reaction with a series of corresponding saturated and unsaturated alkyl‐ and fluoroalkyl halides. Henry‐reaction with MeNO₂ or EtNO₂ followed to afford the nitro‐olefines, which were then reduced with AlH₃ to the desired 2‐phenylethyl‐ and 1‐methyl‐2‐phenylethylamine derivatives.     

Novel Copolymers of Styrene and Alkyl Ring‐Substituted Methyl 2‐Cyano‐3‐phenyl‐2‐propenoates

Electrophilic trisubstituted ethylene monomers, alkyl ring substituted methyl 2‐cyano‐3‐phenyl‐2‐propenoates, RC₆H₄CH[dbnd]C(CN)CO₂CH₃, where R is 2‐methyl, 3‐methyl, 4‐methyl, 4‐isopropyl, and 2,5‐dimethyl were synthesized by piperidine catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and methyl cyanoacetate, and characterized by CHN elemental analysis, IR, ¹H and ¹³C NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (AIBN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 260–400°C range.     

Novel Copolymers of Styrene and Alkyl and Alkoxy Ring‐Trisubstituted Methyl 2‐Cyano‐3‐phenyl‐2‐propenoates

Electrophilic trisubstituted ethylene monomers, akyl and alkoxy ring‐trisubstituted methyl 2‐cyano‐3‐phenyl‐2‐propenoates, RC₆H₂CH[dbnd]C(CN)CO₂CH_3, (where R is 2,3‐dimethyl‐4‐methoxy, 2,5‐dimethyl‐4‐methoxy‐, 2,3,4‐trimethoxy‐, 2,4,5‐trimethoxy, 2,4,6‐trimethoxy, and 2,4‐dimethoxy‐3‐methyl), were synthesized by the piperidine catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and methyl cyanoacetate, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (AIBN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 283–306°C range.     

Novel Copolymers of Vinyl Acetate and Alkyl Ring‐Substituted 2‐Phenyl‐1,1‐dicyanoethylenes

Electrophilic trisubstituted ethylene monomers, alkyl ring‐substituted 2‐phenyl‐1,1‐dicyanoethylenes, RC₆H₄CH?C(CN)₂ (where R is 2‐methyl, 3‐methyl,4‐methyl, 4‐ethyl, 4‐isopropyl, 4‐butyl, and 4‐t‐butyl), were synthesized by piperidine catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and malononitrile, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and vinyl acetate were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C‐NMR, GPC, DSC, and TGA. High T_g of the copolymers, in comparison with that of polyvinyl acetate, indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 190–700°C range.     

Synthesis of Derivatives of Pyrido[4,3‐d]pyrimidin‐4(3H)‐one via an Iminophosphorane

A series of new, 2‐substituted 3‐aryl‐8,9,10,11‐tetrahydro‐5‐methyl[1]benzothieno[3′,2′ : 5,6]pyrido[4,3‐d]pyrimidin‐4(3H)‐ones, compounds 5a – q , were designed and synthesized via the aza‐Wittig reaction as the key step. The iminophosphorane 1 reacted with phenyl isocyanate (or 4‐chlorophenyl isocyanate) to the carbodiimide 4 , which was cyclized to 5 upon addition of different amines, EtOH, or phenols in the presence of a catalytic amount of EtONa or K₂CO₃ (Schemes 1 and 2). The structures of compounds 5 were confirmed by IR, ¹H‐ and ¹³C‐NMR, EI‐MS, elemental analyses, and, in the case of 5l , by single‐crystal X‐ray diffraction (Figure).     

Mg(ClO4)2-catalyzed intramolecular allylic amination: application to the total synthesis of demethoxyfumitremorgin C

A Mg(ClO₄)₂-catalyzed intramolecular amination of allylic alcohols with carbamate or sulfonamide nucleophiles to form substituted piperidine and pyrrolidine derivatives has been developed. This method has been successfully applied to the total synthesis of demethoxyfumitremorgin C.     

Palladium‐catalyzed carbonylation of primary amines in supercritical carbon dioxide

The chemoselectivity of the palladium‐catalyzed carbonylation of amines was affected by the addition of MeOH in supercritical carbon dioxide. The results show different selectivity in supercritical carbon dioxide CO₂(sc) from that in alcohol. Methyl carbamate and its derivatives were obtained in high yields in CO₂(sc).     

Palladium‐Catalyzed One‐Pot Three‐ or Four‐Component Coupling of Aryl Iodides,Alkynes, and Amines through CN Bond Cleavage: Efficient Synthesis of Indole Derivatives

An efficient synthesis of N‐substituted indole derivatives was realized by combining the Pd‐catalyzed one‐pot multicomponent coupling approach with cleavage of the C(sp³)?N bonds. Three or four components of aryl iodides, alkynes, and amines were involved in this coupling process. The cyclopentadiene–phosphine ligand showed high efficiency. A variety of aryl iodides, including cyclic and acyclic tertiary amino aryl iodides, and substituted 1‐bromo‐2‐iodobenzene derivatives could be used. Both symmetric and unsymmetric alkynes substituted with alkyl, aryl, or trimethylsilyl groups could be applied. Cyclic secondary amines such as piperidine, morpholine, 4‐methylpiperidine, 1‐methylpiperazine, 2‐methylpiperidine, and acyclic amines including secondary and primary amines all showed good reactivity. Further application of the resulting indole derivatives was demonstrated by the synthesis of benzosilolo[2,3‐b]indole.     

Direct Regio‐ and Diastereoselective Synthesis of δ‐Lactams from Acrylamides and Unactivated Alkenes Initiated by RhIII‐Catalyzed C−H Activation

We report a Rh^III‐catalyzed regio‐ and diastereoselective synthesis of δ‐lactams from readily available acrylamide derivatives and unactivated alkenes. The reaction provides a rapid route to a diverse set of δ‐lactams in good yield and stereoselectivity, which serve as useful building blocks for substituted piperidines. The regioselectivity of the reaction with unactivated terminal alkene is significantly improved by using Cp^t ligand on the Rh^III catalyst. The synthetic utility of the reaction is demonstrated by the preparation of a potential drug candidate containing a trisubstituted piperidine moiety. Mechanistic studies show that the reversibility of the C?H activation depends on the choice of Cp ligand on the Rh^III catalyst. The irreversible C?H activation is observed and becomes turnover‐limiting with [Cp^tRhCl₂]₂ as catalyst.     

Synthesis of cis‐3‐methyl‐4‐aminopiperidine Derivatives

A facile approach for the preparation of cis‐3‐methyl‐4‐aminopiperidine derivatives is described. The synthesis was carried out via regioselective ring opening of N‐benzyl‐3‐methyl‐3,4‐epoxi‐piperidine (8), which can be easily obtained in two steps from the corresponding N‐benzyl‐pyridinium salt (5). Seven new cis‐3‐methyl‐4‐amino and amido piperidines compounds were obtained.     

The Transition States for CO2 Capture by Substituted Ethanolamines

Quantum chemical studies are used to understand the electronic and steric effects on the mechanisms of the reaction of substituted ethanolamines with CO₂. SCS‐MP2/6‐311+G(2d,2p) calculations are used to obtain the activation energy barriers and reaction energies for both the carbamate and bicarbonate formation. Implicit solvent effects are included with the universal solvation model SMD. Carbamate formation is more favorable than bicarbonate formation for monoethanolamine (MEA) both kinetically and thermodynamically. Increase of the steric hindrance on the C atoms around the N atom in substituted ethanolamines favors bicarbonate formation over carbamate formation with lower activation barriers and thereby higher reaction rates. In contrast, substitution by an N‐methyl or N‐ethyl group on MEA leads to a lower activation barrier for both carbamate formation and bicarbonate formation. As a result, higher reaction rates are expected as compared to MEA, and therefore these compounds have significant potential as industrial CO₂ capturing solvents.     

The Synthesis,Spectral, and Electrochemical Characterization of Novel Alkoxybenzoquinone Derivatives

The novel monosubstituted benzoquinone compounds 3e , 3g , 3h ; 2,5‐O‐ substituted benzoquinone compounds 4a , 4b , 4c , 4d , 4e 4g and known compound 4h and 2,6‐O‐ substituted benzoquinone compounds 5e , 5f , 5g , 5h were obtained by the reaction of p‐chloranil ( 1 ) and related alcohol compounds in potassium carbonate (K₂CO₃) solution of acetonitrile or chloroform with Et₃N. The novel cyclic compounds 7 , 8 and 10 , 11 were obtained from the reaction of p‐chloranil ( 1 ) and diols in potassium carbonate (K₂CO₃) solution of acetonitrile at room temperature. The structures of novel compounds were characterized by using micro analysis, FT‐IR, ¹H‐NMR, ¹³C‐NMR, MS and cyclic voltammetry.     

Synthesis,characterization and studies of new 3‐benzyl‐4H‐1,2,4‐triazole‐5‐thiol and thiazolo[3,2‐b][1,2,4]triazole‐5(6H)‐one heterocycles

3‐Benzyl‐4‐phenyl‐1,2,4‐triazole‐5‐thiol ( 1 ) was synthesized and used as starting material for preparation of 1,2,4‐triazole bearing substituted thiosemicarbazides moiety ( 4a‐d ) in high yields. The thiosemicarbazides 4a‐d were cyclized in basic medium to give two triazole rings linked by thiomethylene group ( 5a‐d ), while cyclization of thiosemicarbazides 4a‐d with chloroacetyl chloride in the presence of CHCl₃ and K₂CO₃ afforded the thiazolidinone derivatives 6a‐d . The reaction of thiosemicarbazides 4a‐c with phenacyl bromide in the presence of EtOH and fused CH₃COONa gave the corresponding thiazoline ring systems 7a‐c . Condensation of the 3‐benzyl‐1,2,4‐triazole‐5(1H)‐thiol ( 1 ) with chloroacetic acid and aromatic aldehydes ( 8a‐ g) in boiling acetic acid/acetic anhydride mixture in the presence of fused sodium acetate gave one single isomer only, which might be 9a‐g or 10a‐g . Upon application of Micheal addition reaction on compounds 9a‐e with cyclic secondary amines such as piperidine or morpholine the 2‐benzyl‐6‐(α‐amino‐aryl/methyl)‐1,3‐thiazolo[3,2‐ b][1,2,4]‐triazol‐5‐ols ( 11a‐j ) were obtained in good yields The structure of all new compounds were determined using both spectral and elemental analyses.     

Synthese von neuen (Phenylalkyl)aminen zur Untersuchung von Struktur–Aktivitätsbeziehungen. Mitteilung 2

Synthesis of Novel (Phenylalkyl)amines for the Investigation of Structure–Activity Relationships. Part 2¹). 4‐Thio‐Substituted [2‐(2,5‐Dimethoxyphenyl)ethyl]amines (=2,5‐Dimethoxybenzeneethanamines) The 4‐substituted [2‐(2,5‐dimethoxyphenyl)ethyl]amines (=2,5‐dimethoxybenzeneethanamines) and its α‐methyl analogs are known to act as potent 5‐HT_2A/C ligands, which have, depending on their 4‐substituent, agonistic or antagonistic character. Generally, compounds with a small lipophilic substituent typically are agonists and those with a larger lipophilic substituent predominantly antagonists or at least partial agonists. Since little is known about the transition and more information is needed about the structural requirements of the 4‐substituent to control the functional activity, 12 novel 4‐thio‐substituted [2‐(2,5‐dimethoxyphenyl)ethyl]amines were synthesized and spectroscopically characterized. Thus 2,5‐dimethoxybenzenethiol ( 7 ) was converted to the thioether derivatives 8a – l with several alkyl, fluoroalkyl, alkenyl, and benzyl halides. Subsequent Vilsmeier‐formylation afforded the benzaldehydes 9a – l , condensation with MeNO₂ the nitroethenyl derivatives 10a – l , and reduction with AlH₃ the desired (2‐phenylethyl)amines 11a – l .     

α‐Propargyl amino acid‐derived optically active novel substituted polyacetylenes: Synthesis,secondary structures,and responsiveness to ions

Novel optically active substituted acetylenes HC? CCH₂CR¹(CO₂CH₃)NHR² [(S)‐/(R)‐ 1 : R¹ = H, R² = Boc, (S)‐ 2 : R¹ = CH₃, R² = Boc, (S)‐ 3 : R¹ = H, R² = Fmoc, (S)‐ 4 : R¹ = CH₃, R² = Fmoc (Boc = tert‐butoxycarbonyl, Fmoc = 9‐fluorenylmethoxycarbonyl)] were synthesized from α‐propargylglycine and α‐propargylalanine, and polymerized with a rhodium catalyst to provide the polymers with number‐average molecular weights of 2400–38,900 in good yields. Polarimetric, circular dichroism (CD), and UV–vis spectroscopic analyses indicated that poly[(S)‐ 1 ], poly[(R)‐ 1 ], and poly[(S)‐ 4 ] formed predominantly one‐handed helical structures both in polar and nonpolar solvents. Poly[(S)‐ 1a ] carrying unprotected carboxy groups was obtained by alkaline hydrolysis of poly[(S)‐ 1 ], and poly[(S)‐ 4b ] carrying unprotected amino groups was obtained by removal of Fmoc groups of poly[(S)‐ 4 ] using piperidine. Poly[(S)‐ 1a ] and poly[(S)‐ 4b ] also exhibited clear CD signals, which were different from those of the precursors, poly[(S)‐ 1 ] and poly[(S)‐ 4 ]. The solution‐state IR measurement revealed the presence of intramolecular hydrogen bonding between the carbamate groups of poly[(S)‐ 1 ] and poly[(S)‐ 1a ]. The plus CD signal of poly[(S)‐ 1a ] turned into minus one on addition of alkali hydroxides and tetrabutylammonium fluoride, accompanying the red‐shift of λ_max. The degree of λ_max shift became large as the size of cation of the additive. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Reaction of 1,1′‐Divinyl Ferrocene with One‐Electron Oxidants: Entry into Functionalised [4]Ferrocenophanes and Observation of an Isotope‐Dependent Chemoselectivity Effect

1,1′‐Divinyl ferrocene ( 2 ) reacts with K₃[Fe(CN)₆] under basic biphasic conditions to give a [4]ferrocenophane ( 4 ) in good yield. Incorporating deuterium labels into the internal positions of the vinyl groups of 2 affects the chemoselectivity of the reaction; thus under identical reaction conditions, [D₂]‐ 2 reacts to provide a diol‐functionalised [4]ferrocenophane, [D₂]‐D /L ‐ 6 in addition to the expected keto‐alcohol, [D₁]‐ 4 . Variants on this one‐electron oxidative cyclisation methodology can be used to give other [4]ferrocenophanes; thus, the reaction of 2 with CuCl₂ in MeOH or iPrOH leads to dialkoxy [4]ferrocenophanes 19 and 20 , respectively, whereas the reaction of 2 with benzyl carbamate in the presence of tBuOCl gives a bis(carbamate)[4]ferrocenophane, 21 . Mechanisms to account for the formation of the products, the stereoselectivity, and the unusual isotope‐dependent chemoselectivity in the reaction of 2 and [D₂]‐ 2 with K₃[Fe(CN)₆] are proposed.     

Insights into amine-based CO<Subscript>2</Subscript> capture: an ab initio self-consistent reaction field investigation

Ab initio many-body perturbation theory (MP2/6-311++G(,dp)), density functional theory (B3LYP/6-31++G(d,p)) and self-consistent reaction field (IEF-PCM UA HF/6-31G(d)) calculations have been used to study the CO₂ capture reagents NH₃, 2-hydroxyethylamine (MEA), diaminoethane (EN), 2-amino-1-propanol (2A1P), diethanolamine (DEA), N-methyl-2-hydroxyethylamine (N-methylMEA), 2-amino-2-methyl-1-propanol (AMP), trishydroxymethylaminomethane (tris), piperazine (PZ) and piperidine (PD). This study involved full conformational searches of the capture amines in their native and protonated forms, and their carbamic acid and carbamate derivatives. Using this data, we were able to compute Boltzmann-averaged thermodynamic values for the amines, carbamates and carbamic acid derivatives, as well as equilibrium constants for a series of ‘universal’ aqueous capture reactions. Important findings include (i) relative pK _a values for the carbamic acid derivatives are a useful measure of carbamate stability, due to a particular chemical resonance which is also manifest in short computed N–CO₂H bonds at both levels of theory, (ii) the computational results for sterically hindered amines such as AMP and tris are consistent with these species forming carbamates which readily hydrolyse and (iii) the amine-catalysed reaction between OH⁻ and CO₂ to generate bicarbonate correlates with amine pK _a. Thermodynamic data from the ab initio computations predicts that the heterocycles PD and PZ and the acyclic sorbent EN are good choices for a capture solvent. AMP and tris perform poorly in comparison.     

New 1,2,3‐triazolo[4,5‐d]1,2,4‐triazolo[3,4‐b]pyridazine derivatives II

New tricyclic 1,2,3‐triazolo‐1,2,4‐triazolo‐pyridazine derivatives, bearing a methyl substituent on the 1,2,3‐triazole ring, were prepared as potential biological agents. N‐Methylation of dimethyl 1,2,3‐triazole‐4,5‐dicarboxylate allowed synthesis of the isomeric 1‐methyl‐4,7‐dihydroxy and 2‐methyl‐4,7‐dihydroxy triazolo‐pyridazines 4a and 4b which, by a chlorination reaction, gave the corresponding 1‐methyl‐4‐chloro‐( 6a ), 1‐methyl‐7‐chloro‐ ( 6b ) and 2‐methyl‐4‐chloro‐ ( 9 ) substituted 1,2,3‐triazolo‐pyridazines. The nucle‐ophilic substitution with hydrazine hydrate and the suitable cyclization to form the 1,2,4‐triazole ring, provided the expected tricyclic isomeric derivatives 8a, 8b and 11 respectively. The p‐methoxybenzyl substituent, introduced as a leaving group to obtain either v‐triazolo‐pyridazine or v‐triazolo‐s‐triazolo‐pyri‐dazine derivatives unsubstituted on the 1,2,3‐triazole ring, appeared inadequate. Some compounds underwent binding assays toward the adenosine A₁and A_2A receptors.     

Trapping of carbamic acid species with (trimethylsilyl)diazomethane

Methoxycarbonylation of a variety of amines into the corresponding methyl carbamates was accomplished by allowing them to react with (trimethylsilyl)diazomethane TMSCHN₂ under bubbling of CO₂. The reaction was performed at room temperature for a period of ca. 2 h in benzene-MeOH (4/1 v/v), which was the solvent of choice. In this mixed solvent, undesirable bicarbonate is formed in equilibrium along with carbamate anion. Owing to the irreversibility in the esterification step by TMSCHN₂, however, the yield of methyl carbamate can reach very high.