Understanding Electrogenerated Chemiluminescence Efficiency in Blue‐Shifted Iridium(III)‐Complexes: An Experimental and Theoretical Study

Compared to tris(2‐phenylpyridine)iridium(III) ([Ir(ppy)₃]), iridium(III) complexes containing difluorophenylpyridine (df‐ppy) and/or an ancillary triazolylpyridine ligand [3‐phenyl‐1,2,4‐triazol‐5‐ylpyridinato (ptp) or 1‐benzyl‐1,2,3‐triazol‐4‐ylpyridine (ptb)] exhibit considerable hypsochromic shifts (ca. 25–60 nm), due to the significant stabilising effect of these ligands on the HOMO energy, whilst having relatively little effect on the LUMO. Despite their lower photoluminescence quantum yields compared with [Ir(ppy)₃] and [Ir(df‐ppy)₃], the iridium(III) complexes containing triazolylpyridine ligands gave greater electrogenerated chemiluminescence (ECL) intensities (using tri‐n‐propylamine (TPA) as a co‐reactant), which can in part be ascribed to the more energetically favourable reactions of the oxidised complex (M⁺) with both TPA and its neutral radical oxidation product. The calculated iridium(III) complex LUMO energies were shown to be a good predictor of the corresponding M⁺ LUMO energies, and both HOMO and LUMO levels are related to ECL efficiency. The theoretical and experimental data together show that the best strategy for the design of efficient new blue‐shifted electrochemiluminophores is to aim to stabilise the HOMO, while only moderately stabilising the LUMO, thereby increasing the energy gap but ensuring favourable thermodynamics and kinetics for the ECL reaction. Of the iridium(III) complexes examined, [Ir(df‐ppy)₂(ptb)]⁺ was most attractive as a blue‐emitter for ECL detection, featuring a large hypsochromic shift (λ_max=454 and 484 nm), superior co‐reactant ECL intensity than the archetypal homoleptic green and blue emitters: [Ir(ppy)₃] and [Ir(df‐ppy)₃] (by over 16‐fold and threefold, respectively), and greater solubility in polar solvents.     

Exploring Excited‐State Tunability in Luminescent Tris‐cyclometalated Platinum(IV) Complexes: Synthesis of Heteroleptic Derivatives and Computational Calculations

The synthesis, structure, electrochemistry, and photophysical properties of a series of heteroleptic tris‐ cyclometalated Pt^IV complexes are reported. The complexes mer‐[Pt(C^N)₂(C′^N′)]OTf, with C^N=C‐deprotonated 2‐(2,4‐difluorophenyl)pyridine (dfppy) or 2‐phenylpyridine (ppy), and C′^N′=C‐deprotonated 2‐(2‐thienyl)pyridine (thpy) or 1‐phenylisoquinoline (piq), were obtained by reacting bis‐ cyclometalated precursors [Pt(C^N)₂Cl₂] with AgOTf (2 equiv) and an excess of the N′^C′H pro‐ligand. The complex mer‐[Pt(dfppy)₂(ppy)]OTf was obtained analogously and photoisomerized to its fac counterpart. The new complexes display long‐lived luminescence at room temperature in the blue to orange color range. The emitting states involve electronic transitions almost exclusively localized on the ligand with the lowest π–π* energy gap and have very little metal character. DFT and time‐dependent DFT (TD‐DFT) calculations on mer‐[Pt(ppy)₂(C′^N′)]⁺ (C′^N′=thpy, piq) and mer/fac‐[Pt(ppy)₃]⁺ support this assignment and provide a basis for the understanding of the luminescence of tris‐cyclometalated Pt^IV complexes. Excited states of LMCT character may become thermally accessible from the emitting state in the mer isomers containing dfppy or ppy as chromophoric ligands, leading to strong nonradiative deactivation. This effect does not operate in the fac isomers or the mer complexes containing thpy or piq, for which nonradiative deactivation originates mainly from vibrational coupling to the ground state.     

Robust Tris‐Cyclometalated Iridium(III) Phosphors with Ligands for Effective Charge Carrier Injection/Transport: Synthesis,Redox, Photophysical,and Electrophosphorescent Behavior

With the target to design and develop new functionalized green triplet light emitters that possess distinctive electronic properties for robust and highly efficient phosphorescent organic light‐emitting diodes (PHOLEDs), a series of bluish–green to yellow–green phosphorescent tris‐cyclometalated homoleptic iridium(III) complexes [Ir(ppy‐X)₃] (X=SiPh₃, GePh₃, NPh₂, POPh₂, OPh, SPh, SO₂Ph, Hppy=2‐phenylpyridine) have been synthesized and fully characterized by spectroscopic, redox, and photophysical methods. By chemically manipulating the lowest triplet‐state character of Ir(ppy)₃ with some functional main‐group 14–16 moieties on the phenyl ring of ppy, a new family of metallophosphors with high‐emission quantum yields, short triplet‐state lifetimes, and good hole‐injection/hole‐transporting or electron‐injection/electron‐transporting properties can be obtained. Remarkably, all of these Ir^III complexes show outstanding electrophosphorescent performance in multilayer doped devices that surpass that of the state‐of‐the‐art green‐emitting dopant Ir(ppy)₃. The devices described herein can reach the maximum external quantum efficiency (η_ext) of 12.3 %, luminance efficiency (η_L) of 50.8 cd A^?1, power efficiency (η_p) of 36.9 Lm W^?1 for [Ir(ppy‐SiPh₃)₃], 13.9 %, 60.8 cd A^?1, 49.1 Lm W^?1 for [Ir(ppy‐NPh₂)₃], and 10.1 %, 37.6 cd A^?1, 26.1 Lm W^?1 for [Ir(ppy‐SO₂Ph)₃]. These results provide a completely new and effective strategy for carrier injection into the electrophosphor to afford high‐performance PHOLEDs suitable for various display applications.     

Synthesis of fac‐Ir(ppy)3 end‐functionalized poly(1,3‐cyclohexadiene): single monomer addition of fac‐Ir(ppy)2(vppy) for well‐controlled polymer synthesis

Synthesis of the polymer whose end is functionalized by fac‐Ir(ppy)₃ (ppy = 2‐phenylpyridyl) was achieved by using (living) anionic polymerization of 1,3‐cyclohexadiene: the reaction of poly(1,3‐cyclohexadienyl)lithium (PCHDLi) with fac‐Ir(ppy)₂(vppy) [vppy = 2‐(4‐vinylphenyl)pyridyl] resulted in nucleophilic attack of the carbanion in PCHDLi on the vinyl group of fac‐Ir(ppy)₂(vppy) selectively. Complexation of the pyridyl ring protected the α‐carbons of fac‐Ir(ppy)₂(vppy) from the reaction of the anionic polymer. The homopolymerization of fac‐Ir(ppy)₂(vppy) did not occur, and only one molecule of fac‐Ir(ppy)₂(vppy) reacted with the carbanion of PCHDLi and was selectively incorporated into an end of poly(1,3‐cyclohexadiene) (PCHD). Thus, the PCHD with fac‐Ir(ppy)₃ end‐group was obtained with a well‐controlled and defined polymer structure and molecular weight. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Red‐ and Green‐Emitting Iridium(III) Complexes for a Dual Barometric and Temperature‐Sensitive Paint

A new dual luminescent sensitive paint for barometric pressure and temperature (T) is presented. The green‐emitting iridium(III) complex [Ir(ppy)₂(carbac)] (ppy=2‐phenylpyridine; carbac=1‐(9H‐carbazol‐9‐yl)‐5,5‐dimethylhexane‐2,4‐dione) was applied as a novel probe for T along with the red‐emitting complex [Ir(btpy)₃], (btpy=2‐(benzo[b]thiophene‐2‐yl)pyridine) which functions as a barometric (in fact oxygen‐sensitive) probe. Both iridium complexes were dissolved in different polymer materials to achieve optimal responses. The probe [Ir(ppy)₂(carbac)] was dispersed in gas‐blocking poly(acrylonitrile) microparticles in order to suppress any quenching of its luminescence by oxygen. The barometric probe [Ir(btpy)₃], in turn, was incorporated in a cellulose acetate butyrate film which exhibits good permeability for oxygen. The effects of temperature on the response of the oxygen probe can be corrected by simultaneous optical determination of T, as the poly(acrylonitrile) microparticles containing the temperature indicator are incorporated into the film. The phosphorescent signals of the probes for T and barometric pressure, respectively, can be separated by optical filters due to the ≈75 nm difference in their emission maxima. The dual sensor is applicable to luminescence lifetime imaging of T and barometric pressure. It is the first luminescent dual sensor material for barometric pressure/T based exclusively on the use of Ir^III complexes in combination with luminescence lifetime imaging.     

Highly soluble green‐emitting Ir(III) complexes with 9‐(6‐phenyl‐pyridin‐3‐ylmethyl)‐9H‐carbazole ligands and their application to polymer light‐emitting diodes

Highly organic soluble Ir(III) complexes with 9‐(6‐phenyl‐pyridin‐3‐ylmethyl)‐9H‐carbazole were simply synthesized, and the solubility of the new complex was significantly improved when compared with the conventional green‐emitting Ir(ppy)₃. Since a carbazole group is tethered through a nonconjugated methylene spacer, the photophysical properties of new complexes are almost identical with those of conventional Ir(ppy)₃. The pure complexes were utilized to prepare electrophosphorescent polymer light‐emitting diodes (PLEDs). The device performances were observed to be relatively better or comparable with those of Ir(ppy)₃ based poly(N‐vinylcarbazole) systems. The integration of rigid hole‐transporting carbazole and phosphorescent complex provides a new route to design highly efficient solution‐processable complex for electrophosphorescent PLED applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7419–7428, 2008     

Combining Photoredox‐Catalyzed Trifluoromethylation and Oxidation with DMSO: Facile Synthesis of α‐Trifluoromethylated Ketones from Aromatic Alkenes

Trifluoromethylated ketones are useful building blocks for organic compounds with a trifluoromethyl group. A new and facile synthesis of ketones with a trifluoromethyl substituent in the α‐position proceeds through a one‐pot photoredox‐catalyzed trifluoromethylation–oxidation sequence of aromatic alkenes. Dimethyl sulfoxide (DMSO) serves as a key and mild oxidant under these photocatalytic conditions. Furthermore, an iridium photocatalyst, fac[Ir(ppy)₃] (ppy=2‐phenylpyridine), turned out to be crucial for the present photoredox process.     

Greenish‐yellow‐, yellow‐, and orange‐light‐emitting iridium(III) polypyridyl complexes with poly(ε‐caprolactone)–bipyridine macroligands

A set of novel greenish‐yellow‐, yellow‐, and orange‐light‐emitting polymeric iridium(III) complexes were synthesized with the bridge‐splitting method. The respective dimeric precursor complexes, [Ir(ppy)₂‐μ‐Cl]₂ (ppy = 2‐phenylpyridine) and [Ir(ppy? CHO)₂‐μ‐Cl]₂ [ppy? CHO = 4‐(2‐pyridyl)benzaldehyde], were coordinated to 2,2′‐bipyridine carrying poly(ε‐caprolactone) tails. The resulting emissive polymers were characterized with one‐dimensional (¹H) and two‐dimensional (¹H? ¹H correlation spectroscopy) nuclear magnetic resonance and infrared spectroscopy, gel permeation chromatography, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and the successful coordination of the iridium(III) centers to the 2,2′‐bipyridine macroligand was revealed. The thermal behavior was studied with differential scanning calorimetry and correlated with atomic force microscopy. Furthermore, the quantitative coordination was verified by both the photophysical and electrochemical properties of the mononuclear iridium(III) compounds. The photoluminescence spectra showed strong emissions at 535 and 570 nm. The color shifts depended on the substituents of the cyclometallating ligands. Cyclic voltammetry gave oxidation potentials of 1.23 V and 1.46 V. Upon the excitation of the films at 365 nm, yellow light was observed, and this could allow potential applications in light‐emitting devices. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2765–2776, 2005     

Organic electroluminescent devices containing phosphorescent molecules in molecularly doped hole transporting layer

We demonstrate high-efficient simple electrophosphorescent devices comprised of tris{4-[N-(3-methylphenyl)anilino]phenyl}amine (m-MTDATA) dispersed in a polycarbonate (PC) matrix as a hole-transporting layer (HTL), and 2-(biphenyl-4-yl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (PBD) as an electron-transporting layer (ETL). The HTL doped with a complex phosphor fac-tris(2-phenylpyridine)iridium, [Ir(ppy)₃], and/or 5,6,11,12-tetraphenyltetracene (rubrene) fluorescent dye is shown to act as an emitter. Devices containing [Ir(ppy)₃] as a single HTL dopant show the highest external quantum efficiency (QE) reaching 9 % (photon/electron) due to direct electron-hole recombination on phosphorescent [Ir(ppy)₃]. A decrease in QE of one order of magnitude at high current densities is observed in all devices. Addition of rubrene to [Ir(ppy)₃]-doped devices shifts the maximum QE towards larger current densities.     

Electrochemiluminescence Studies of Phosphorescent Dopant and Host Molecules of Polymer Light-emitting Diodes

Electrochemiluminescence (ECL) from tris(2‐phenylpyridine)irdium [Ir(ppy)₃] was investigated following cross reaction of its anion with oxidized poly(N‐vinyl‐carbazole) (PVK) and its cation with reduced 2‐(4‐biphenylyl)‐5‐(4‐tert‐butyl‐phenyl)‐1,3,4‐oxadiazole (PBD). Both cross reactions show Ir(ppy)₃ emission and the cross reaction of PVK^+·/Ir(ppy)⁻₃ showed the highest ECL intensity. The comparisons of the reaction enthalpy and the energy of Ir(ppy)₃ light emitting shows that reaction between PVK^+· and Ir(ppy)⁻₃ is energy sufficient to populate metal‐to‐ligand charge transfer (MLCT) excited singlet (3.04 eV) of Ir(ppy)₃, while the reaction between Ir(ppy)⁺₃ and PBD^{− ·} is energy efficient to populate MLCT excited triplet (2.4 eV). The ECL result in solution reveals that the energy released from charge transfer between the Ir(ppy)₃ and PVK or PBD is sufficient to produce the excited state of Ir(ppy)₃ in solid polymer light‐emitting diodes (PLEDs) based on PVK:PBD hosts doped by Ir(ppy)₃. These results obtained will provide further insight into charge‐transfer excitation in PLEDs.     

Charge‐Neutral Amidinate‐Containing Iridium Complexes Capable of Efficient Photocatalytic Water Reduction

Two new charge‐neutral iridium complexes, [Ir(tfm‐ppy)₂(N,N′‐diisopropyl‐benzamidinate)] ( 1 ) and [Ir(tfm‐ppy)₂(N,N′‐diisopropyl‐4‐diethylamino‐3,5‐dimethyl‐benzamidinate)] ( 2 ) (tfm‐ppy=4‐trifluoromethyl‐2‐phenylpyridine) containing an amidinate ligand and two phenylpyridine ligands were designed and characterised. The photophysical properties, electrochemical behaviours and emission quenching properties of these species were investigated. In concert with the cobalt catalyst [Co(bpy)₃]²⁺, members of this new class of iridium complexes enable the photocatalytic generation of hydrogen from mixed aqueous solutions via an oxidative quenching pathway and display long‐term photostability under constant illumination over 72 h; one of these species achieved a relatively high turnover number of 1880 during this time period. In the case of complex 1 , the three‐component homogeneous photocatalytic system proved to be more efficient than a related system containing a charged complex, [Ir(tfm‐ppy)₂(dtb‐bpy)]⁺ ( 3 , dtb‐bpy=4,4′‐di‐tert‐butyl‐2,2′‐dipyridyl). In combination with a rhodium complex as a water reduction catalyst, the performances of the systems using both complexes were also evaluated, and these systems exhibited a more efficient catalytic propensity for water splitting than did the cobalt‐based systems that have been studied previously.     

Mild and Low‐Pressure fac‐Ir(ppy)3‐Mediated Radical Aminocarbonylation of Unactivated Alkyl Iodides through Visible‐Light Photoredox Catalysis

A novel, mild and facile preparation of alkyl amides from unactivated alkyl iodides employing a fac‐Ir(ppy)₃‐catalyzed radical aminocarbonylation protocol has been developed. Using a two‐chambered system, alkyl iodides, fac‐Ir(ppy)₃, amines, reductants, and CO gas (released ex situ from Mo(CO)₆), were combined and subjected to an initial radical reductive dehalogenation generating alkyl radicals, and a subsequent aminocarbonylation with amines affording a wide range of alkyl amides in moderate to excellent yields.     

Regiospecific Intermolecular Aminohydroxylation of Olefins by Photoredox Catalysis

A simple and regiospecific aminohydroxylation of olefins by photoredox catalysis has been developed. N‐protected 1‐aminopyridinium salts are the key compounds and serve as amidyl radical precursors by the action of Ir photocatalysts, fac‐[Ir(ppy)₃] and [Ir(ppy)₂(dtbbpy)](PF₆) (ppy=2‐pyridylphenyl, dtbbpy=4,4′‐di‐tert‐butyl‐2,2′‐bipyridine). The present photocatalytic system allows for synthesis of vicinal aminoalcohol derivatives from olefins with various functional groups under mild reaction conditions with easy handling.     

Decoration of Dibenzofuran Using Cyanocarbazole via 6‐Position as a Molecular Design Approach for High‐Triplet‐Energy Bipolar Host Materials

In this study, two new dibenzofuran derivatives featuring one or two cyanocarbazole units, 6‐(dibenzo[b,d]furan‐4‐yl)‐9‐phenyl‐9H‐carbazole‐3‐carbonitrile ( mBFCzCN) and 6,6′‐(dibenzo[b,d]furan‐4,6‐diyl)bis(9‐phenyl‐9H‐carbazole‐3‐carbonitrile) ( dBFCzCN ), were developed as host materials for phosphorescent organic light emitting diodes (PhOLEDs). A new molecular design connecting the cyanocarbazole to the dibenzofuran using the cyanocarbazole 6‐position instead of its 9‐position was created, and the effects of number of cyanocarbazole units in the dibenzofuran building block on the photophysical and electroluminescence properties were investigated in detail. The mBFCzCN compound revealed high triplet energy (2.78 eV) than that of dBFCzCN (2.68 eV) and good bipolar charge transporting properties. The potential of these materials as hosts for blue and green PhOLEDs was investigated using bis(4,6‐(difluorophenyl)pyridinato‐N,C^2′)picolinate iridium(III) (FIrpic) and tris(2‐phenylpyridinato)iridium(III) (Ir(ppy)₃) dopants, respectively. The results indicated that the mBFCzCN with one cyanocarbazole unit showed better device performance than the dBFCzCN with two cyanocarbazole units in the blue and green devices. High external quantum efficiencies of 19.0 and 21.2 % were demonstrated in the blue and green PhOLEDs with the mBFCzCN host due to its high triplet energy and good bipolar charge transporting characteristics.     

High‐efficiency organic electroluminescent devices using iridium complex emitter and arylamine‐containing polymer buffer layer

We have developed efficient organic electroluminescent (EL) devices using a phosphorescent material, tris(2‐phenylpyridine) iridium, Ir(ppy)₃, as an emitter material and a polymer buffer layer, tetraphenyldiamine‐containing poly(arylene ether sulfone) (PTPDES) doped with tris(4‐bromophenyl) aminium hexachloroantimonate (TBPAH) as an electron acceptor. In this device, a high external quantum efficiency of 21.6% and a luminous efficiency of 82 lm/W (77 cd/A) at 3.0 V were obtained. These high efficiencies can be explained by high quantum efficiency due to phosphorescent Ir(ppy)₃ and high luminous efficiency realized by the use of the polymer buffer layer. Copyright © 2002 John Wiley & Sons, Ltd.     

Visible‐Light‐Driven Hydrogen Production and Polymerization using Triarylboron‐Functionalized Iridium(III) Complexes

The development of novel iridium(III) complexes has continued as an important area of research owing to their highly tunable photophysical properties and versatile applications. In this report, three heteroleptic dimesitylboron‐containing iridium(III) complexes, [Ir(p‐B‐ppy)₂(N^N)]⁺ {p‐B‐ppy=2‐(4‐dimesitylborylphenyl)pyridine; N^N=dipyrido[3,2‐a:2′,3′‐c]phenazine (dppz) ( 1 ), dipyrido[3,2‐d:2′,3′‐f]quinoxaline (dpq) ( 2 ), and 1,10‐phenanthroline (phen) ( 3 )}, were prepared and fully characterized electrochemically, photophysically, and computationally. Altering the conjugated length of the N^N ligands allowed us to tailor the photophysical properties of these complexes, especially their luminescence wavelength, which could be adjusted from λ=583 to 631 nm in CH₂Cl₂. All three complexes were evaluated as visible‐light‐absorbing sensitizers for the photogeneration of hydrogen from water and as photocatalysts for the photopolymerization of methyl methacrylate. The results showed that all of them were active in both photochemical reactions. High activity for the photosensitizer (over 1158 turnover numbers with 1 ) was observed, and the system generated hydrogen even after 20 h. Additionally, poly(methyl methacrylate) with a relatively narrow molecular‐weight distribution was obtained if an initiator (i.e., ethyl α‐bromophenylacetate) was used. The living character of the photoinduced polymerization was confirmed on the basis of successful chain‐extension experiments.     

Color tunable phosphorescent light-emitting diodes based on iridium complexes with substituted 2-phenylbenzothiozoles as the cyclometalated ligands

Several iridium complexes {iridium(III)bis[2-(3-methoxyphenyl)-1,3-benzothiozolato-N,C^2′] acetylacetonate (MeO-BT)₂Ir(acac), iridium(III)bis[2-(2,4-difluorophenyl)-1,3-benzothiozolato-N,C^2′] acetylacetonate (2F-BT)₂Ir(acac), and iridium(III)bis[2-(2,4-difluorophenyl)-6-fluoro-1,3-benzothiozolato-N,C^2′] acetylacetonate (3F-BT)₂Ir(acac)} having different substituents on 2-phenylbenzothiazole have been synthesized. The phosphorescent light emitting diodes (PHOLEDs) using these iridium complexes as dopant emitters were fabricated. The experimental results revealed that the emissive colors of PHOLEDs could be finely tuned by suitable modification of the substituents on the 2-phenylbenzothiazole ligands. Furthermore, these iridium complexes show better emissive properties than the known iridium(III)bis(2-phenylbenzothiozolato-N,C^2′) acetylacetonate (BT)₂Ir(acac).     

Long‐Lived Room‐Temperature Deep‐Red‐Emissive Intraligand Triplet Excited State of Naphthalimide in Cyclometalated IrIII Complexes and its Application in Triplet‐Triplet Annihilation‐Based Upconversion

Cyclometalated Ir^III complexes with acetylide ppy and bpy ligands were prepared (ppy=2‐phenylpyridine, bpy=2,2′‐bipyridine) in which naphthal ( Ir‐2 ) and naphthalimide (NI) were attached onto the ppy ( Ir‐3 ) and bpy ligands ( Ir‐4 ) through acetylide bonds. [Ir(ppy)₃] ( Ir‐1 ) was also prepared as a model complex. Room‐temperature phosphorescence was observed for the complexes; both neutral and cationic complexes Ir‐3 and Ir‐4 showed strong absorption in the visible range (ε=39600 M ^?1 cm^?1 at 402 nm and ε=25100 M ^?1 cm^?1 at 404 nm, respectively), long‐lived triplet excited states (τ_T=9.30 μs and 16.45 μs) and room‐temperature red emission (λ_em=640 nm, Φ_p=1.4 % and λ_em=627 nm, Φ_p=0.3 %; cf. Ir‐1 : ε=16600 M ^?1 cm^?1 at 382 nm, τ_em=1.16 μs, Φ_p=72.6 %). Ir‐3 was strongly phosphorescent in non‐polar solvent (i.e., toluene), but the emission was completely quenched in polar solvents (MeCN). Ir‐4 gave an opposite response to the solvent polarity, that is, stronger phosphorescence in polar solvents than in non‐polar solvents. Emission of Ir‐1 and Ir‐2 was not solvent‐polarity‐dependent. The T₁ excited states of Ir‐2 , Ir‐3 , and Ir‐4 were identified as mainly intraligand triplet excited states (³IL) by their small thermally induced Stokes shifts (ΔE_s), nanosecond time‐resolved transient difference absorption spectroscopy, and spin‐density analysis. The complexes were used as triplet photosensitizers for triplet‐triplet annihilation (TTA) upconversion and quantum yields of 7.1 % and 14.4 % were observed for Ir‐2 and Ir‐3 , respectively, whereas the upconversion was negligible for Ir‐1 and Ir‐4 . These results will be useful for designing visible‐light‐harvesting transition‐metal complexes and for their applications as triplet photosensitizers for photocatalysis, photovoltaics, TTA upconversion, etc.     

Construction of Cyclobutanes by Multicomponent Cascade Reactions in Homogeneous Solution through Visible-Light Catalysis

[2+2] Photocycloaddition of two olefins is a general method to assemble the core scaffold, cyclobutane, found in numerous bioactive molecules. A new approach to synthesize cyclobutanes through multicomponent cascade reactions by merging aldol reaction and Witting reaction with visible-light-induced [2+2] cycloaddition is reported. An array of cyclobutanes with high selectivity has been achieved from commercially available aldehydes, ketones (or phosphorus ylide), and olefins with visible-light irradiation of a catalytic amount of (fac-tris(2-phenylpyridinato-C₂,N)iridium) ([Ir(ppy)₃]) at room temperature. Control experiments and spectroscopic studies revealed that the triplet–triplet energy transfer from the excited [Ir(ppy)₃]* to enones, generated in situ from aldehyde and ketone or aldehyde and phosphorus ylide, is responsible for these simple and efficient muticomponent transformations.     

Tricyclometalated Iridium Complexes as Highly Stable Photosensitizers for Light‐Induced Hydrogen Evolution

The development of an efficient and stable artificial photosensitizer for visible‐light‐driven hydrogen production is highly desirable. Herein, a new series of charge‐neutral, heteroleptic tricyclometalated iridium(III) complexes, [Ir(thpy)₂(bt)] ( 1 – 4 ; thpy=2,2′‐thienylpyridine, bt=2‐phenylbenzothiazole and its derivatives), were systematically synthesized and their structural, photophysical, and electrochemical properties were established. Three solid‐state structures were studied by X‐ray crystallographic analysis. This design offers the unique opportunity to drive the metal‐to‐ligand charge‐transfer (MLCT) band to longer wavelengths for these iridium complexes. We describe new molecular platforms that are based on these neutral iridium complexes for the production of hydrogen through visible‐light‐induced photocatalysis over an extended period of time in the presence of [Co(bpy)₃]²⁺ and triethanolamine (TEOA). The maximum amount of hydrogen was obtained under constant irradiation over 72 h and the system could regenerate its activity upon the addition of cobalt‐based catalysts when hydrogen evolution ceased. Our results demonstrated that the dissociation of the [Co(bpy)₃]²⁺ catalyst contributed to the loss of catalytic activity and limited the long‐term catalytic performance of the systems. The properties of the neutral complexes are compared in detail to those of two known non‐neutral bpy‐type complexes, [Ir(thpy)₂(dtb‐bpy)]⁺ ( 5 ) and [Ir(ppy)₂(dtb‐bpy)]⁺ ( 6 ; ppy=2‐phenylpyridine, dtb‐bpy=4,4′‐di‐tert‐butyl‐2,2′‐dipyridyl). This work is expected to contribute toward the development of long‐lasting solar hydrogen‐production systems.