N‐(3‐silyl propyl) diethylene triamine N,N',N'‐tri‐sulfonic acid immobilized on Fe3‐xTixO4 magnetic nanoparticles: A new recyclable heterogeneous nanocatalyst for the synthesis of hexahydroquinolines

In the present study, for the first time N‐(3‐silyl propyl) diethylene triamine N,N',N''‐tri‐sulfonic acid (SPDETATSA) was grafted on magnetic Fe_3‐xTi_xO₄ nanoparticles. The structure of the resulted nanoparticles was characterized based on Fourier‐transform infrared (FT‐IR), energy‐dispersive X‐ray spectroscopy (EDX), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), and vibrating sample magnetometer (VSM) analyses. The results confirmed the successful immobilization of sulfamic acid groups onto the magnetic support. These nanoparticles exhibited high catalytic activity as novel magnetically recyclable acid nanocatalyst in the synthesis of a diverse range of hexahydroquinolines through one‐pot tandem reactions in excellent yields. Also, this nanocatalyst performed satisfactory catalytic maintenance of activity for the synthesis of the reaction products after 4 rounds of recycling with no considerable loss of activity.     

Synthesis of 2‐Aryl‐1‐arylmethyl‐1H‐1,3‐benzimidazole Derivatives Using Silica‐bonded Propyl‐S‐sulfonic Acid as Recyclable Solid Acid Catalyst

A highly selective synthesis of 2‐aryl‐1‐arylmethyl‐1H‐1,3‐benzimidazoles from the reaction of o‐phenylenediamine and aromatic aldehydes in the presence of silica‐bonded propyl‐S‐sulfonic acid (SBSSA) at 80°C in water in good to excellent yields was developed.     

Triamine‐bonded stationary phase for open tubular capillary electrochromatography

A multi‐functional separation column modified with 3‐[2‐(2‐aminoethylamino)ethylamino] propyl‐trimethoxysilane was developed for open tubular capillary electrochromatography. This functional hydrophilic triamine‐bonded open tubular column could generate both anodic and cathodic EOF. When the pH of the running buffer was below 5.3 (30% 3‐[2‐(2‐aminoethylamino)ethylamino] propyl‐trimethoxysilane, v/v), the anodic EOF was exhibited, which greatly prevented the undesired adsorptions of basic proteins on the capillary inner wall. Favorable separation of four basic proteins (viz. trypsin, ribonuclease A, lysozyme and cytochrome c) was successfully achieved at pH 3.5 of 10 mmol/L phosphate buffer. The column efficiencies of proteins were in the range from 87 000 to 110 000 plates/m, and the RSD values for migration time of four proteins were less than 1.2% (run‐to‐run, n=5). The ionic analytes were also separated efficiently in the co‐electroosmotic mode. The average efficiencies ranged from 81 000 to 190 000 plates/m for seven aromatic acids and 186 000–245 000 plates/m for four nucleoside monophosphates, respectively, and good capillary column repeatability was gained with RSD of the migration time not more than 3.0%. The triamine‐bonded open tubular capillary column is favorable to be an alternative functional medium for the further analysis of basic proteins and anionic analytes.     

Chiral separation of amides of amino acid on a (S)‐N‐(3,5‐dinitrobenzoyl)leucine‐N‐phenyl‐N‐propylamide‐bonded silica using nonaqueous capillary electrochromatography

(S)‐N‐(3,5‐dinitrobenzoyl)leucine‐N‐phenyl‐N‐propylamine‐bonded silica was used as a chiral stationary phase for separation of a set of racemic π‐acidic and π‐basic α‐amino acid amides in electrolyteless ACN‐water eluents by CEC in the RP and polar organic (PO) modes. The effect of the amount of water in the ACN‐water eluent on chiral separation was examined. As water is added to ACN, retention was shortened but resolution and selectivity deteriorated severely. Retention, enantioselectivity, and resolution factors obtained in 100% ACN were compared with those in an n‐hexane‐isopropanol eluent with a small amount of water by normal phase (NP) CEC. Much shorter retention times with comparable enantioselectivities were observed with 100% ACN, demonstrating the advantage of separation on (S)‐N‐(DNB)leucine‐N‐phenyl‐N‐propylamine‐bonded silica in PO‐CEC over NP‐CEC.     

A two‐dimensional copper(II) coordination polymer based on 2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid

Single‐crystal X‐ray diffraction analysis of poly[bis(μ₂‐5‐carboxy‐2‐propyl‐1H‐imidazole‐4‐carboxylato‐κ³N³,O⁴:O⁵)copper(II)], [Cu(C₈H₉N₂O₄)₂)]_n, indicates that one carboxylic acid group of the 2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃PDI) ligand is deprotonated. The resulting H₂PDI⁻ anion, acting as a bridge, connects the Cu^II cations to form a two‐dimensional (4,4)‐connected layer. Adjacent layers are further linked through interlayer hydrogen‐bond interactions, resulting in a three‐dimensional supramolecular structure.     

An Acid‐Catalyzed Fragmentation Reaction of a Triamine‐Linked Acridine Dimer

An acid‐catalyzed cleavage of the C‐N^? bond from N^?‐(2,3,4,5‐tetrahydroxyvaleryl) substituted side chain and/or its acetonide form of a triamine‐linked acridine dimer is de scribed. An envisaged multi‐neighboring group‐assisted solvolysis reaction mechanism is proposed.     

Synthesis of Some New 2‐Oxo‐N‐[(10H‐phenothiazin‐10‐yl)alkyl] Derivatives of Azetidine‐1‐carboxamides

The synthesis of a new series of 4‐aryl‐3‐chloro‐2‐oxo‐N‐[3‐(10H‐phenothiazin‐10‐yl)propyl]azetidine‐1‐carboxamides, 4a – 4m , is described. Phenothiazine on reaction with Cl(CH₂)₃Br at room temperature gave 10‐(3‐chloropropyl)‐10H‐phenothiazine ( 1 ), and the latter reacted with urea to yield 1‐[3‐(10H‐phenothiazin‐10‐yl)propyl]urea ( 2 ). Further reaction of 2 with several substituted aromatic aldehydes led to N‐(arylmethylidene)‐N′‐[3‐(phenothiazin‐10‐yl)propyl]ureas 3a – 3m , which, on treatment with ClCH₂COCl in the presence of Et₃N, furnished the desired racemic trans‐2‐oxoazetidin‐1‐carboxamide derivatives 4a – 4m . The structures of all new compounds were confirmed by IR, and ¹H‐ and ¹³C‐NMR spectroscopy, FAB mass spectrometry, and chemical methods.     

Acceleration effect of N‐allyl group on thermally induced ring‐opening polymerization of 1,3‐benzoxazine

Thermally induced ring‐opening polymerization of monofunctional N‐allyl‐1,3‐benzoxazine 1a was compared with that of N‐(n‐propyl)‐1,3‐benzoxazine 1b to clarify an unexpected effect of allyl group to promote the polymerization, that is, in spite of the comparable bulkiness of allyl group to n‐propyl group, the polymerization of 1a was much faster than that of 1b . Such a difference in polymerization rate was also observed similarly in the comparison of thermally induced polymerization of a bifunctional N‐allyl‐benzoxazine 2a with that of a bifunctional N‐(n‐propyl) analogue 2b . These observations implied a certain contribution of an electron‐rich C? C double bond of the N‐ally group to promotion of the ring‐opening reaction of 1,3‐benzoxazine into the corresponding zwitterionic species, which would involve a mechanism to stabilize the cationic part of the zwitterionic species based on “neighboring group participation” of the C? C double bond. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

The peptide Z‐Aib‐Aib‐Aib‐L‐Ala‐OtBu

The title peptide, N‐benzyloxycarbonyl‐α‐aminoisobutyryl‐α‐aminoisobutyryl‐α‐aminoisobutyryl‐L‐alanine tert‐butyl ester or Z‐Aib‐Aib‐Aib‐L‐Ala‐OtBu (Aib is α‐aminoisobutyric acid, Z is benzyloxycarbonyl and OtBu indicates the tert‐butyl ester), C₂₇H₄₂N₄O₇, is a left‐handed helix with a right‐handed conformation in the fourth residue, which is the only chiral residue. There are two 4→1 intramolecular hydrogen bonds in the structure. In the lattice, molecules are hydrogen bonded to form columns along the c axis.     

Magnetic Nanoparticle Supported Ionic Liquid Assisted Green Synthesis of Pyrazolopyranopyrimidines and 1,6‐diamino‐2‐oxo‐1,2,3,4‐tetrahydropyridine‐3,5‐ dicarbonitriles

A simple and eco‐friendly green protocol was used for synthesis of pyrazolopyranopyrimidines via four‐component reaction of hydrazine hydrate, ethyl acetoacetate, barbituric acid or dimethyl barbituric acid, and aromatic aldehydes under thermal and solvent‐free conditions in the presence of magnetic nanoparticle supported silica bonded n‐propyl‐4‐aza‐1‐azoniabicyclo[2.2.2]octane chloride (MNPs@DABCO⁺Cl^?) as an efficient, recyclable heterogeneous catalyst. MNPs@DABCO⁺Cl^? also catalyzed the synthesis of 1,6‐diamino‐2‐oxo‐1,2,3,4‐tetrahydropyridine‐3,5‐dicarbonitrile derivatives by four‐component reaction of hydrazine hydrate, malononitrile, ethyl cyanoacetate and ketones under thermal and solvent‐free conditions at 80 °C. These methods are practical and offer many advantages, such as high yields, short reaction times, and simple work‐up.     

6‐Propyl‐2‐thiouracil versus 6‐methoxymethyl‐2‐thiouracil: enhancing the hydrogen‐bonded synthon motif by replacement of a methylene group with an O atom

The understanding of intermolecular interactions is a key objective of crystal engineering in order to exploit the derived knowledge for the rational design of new molecular solids with tailored physical and chemical properties. The tools and theories of crystal engineering are indispensable for the rational design of (pharmaceutical) cocrystals. The results of cocrystallization experiments of the antithyroid drug 6‐propyl‐2‐thiouracil (PTU) with 2,4‐diaminopyrimidine (DAPY), and of 6‐methoxymethyl‐2‐thiouracil (MOMTU) with DAPY and 2,4,6‐triaminopyrimidine (TAPY), respectively, are reported. PTU and MOMTU show a high structural similarity and differ only in the replacement of a methylene group (–CH₂–) with an O atom in the side chain, thus introducing an additional hydrogen‐bond acceptor in MOMTU. Both molecules contain an ADA hydrogen‐bonding site (A = acceptor and D = donor), while the coformers DAPY and TAPY both show complementary DAD sites and therefore should be capable of forming a mixed ADA/DAD synthon with each other, i.e. N—H…O, N—H…N and N—H…S hydrogen bonds. The experiments yielded one solvated cocrystal salt of PTU with DAPY, four different solvates of MOMTU, one ionic cocrystal of MOMTU with DAPY and one cocrystal salt of MOMTU with TAPY, namely 2,4‐diaminopyrimidinium 6‐propyl‐2‐thiouracilate–2,4‐diaminopyrimidine–N,N‐dimethylacetamide–water (1/1/1/1) (the systematic name for 6‐propyl‐2‐thiouracilate is 6‐oxo‐4‐propyl‐2‐sulfanylidene‐1,2,3,6‐tetrahydropyrimidin‐1‐ide), C₄H₇N₄⁺·C₇H₉N₂OS⁻·C₄H₆N₄·C₄H₉NO·H₂O, (I), 6‐methoxymethyl‐2‐thiouracil–N,N‐dimethylformamide (1/1), C₆H₈N₂O₂S·C₃H₇NO, (II), 6‐methoxymethyl‐2‐thiouracil–N,N‐dimethylacetamide (1/1), C₆H₈N₂O₂S·C₄H₉NO, (III), 6‐methoxymethyl‐2‐thiouracil–dimethyl sulfoxide (1/1), C₆H₈N₂O₂S·C₂H₆OS, (IV), 6‐methoxymethyl‐2‐thiouracil–1‐methylpyrrolidin‐2‐one (1/1), C₆H₈N₂O₂S·C₅H₉NO, (V), 2,4‐diaminopyrimidinium 6‐methoxymethyl‐2‐thiouracilate (the systematic name for 6‐methoxymethyl‐2‐thiouracilate is 4‐methoxymethyl‐6‐oxo‐2‐sulfanylidene‐1,2,3,6‐tetrahydropyrimidin‐1‐ide), C₄H₇N₄⁺·C₆H₇N₂O₂S⁻, (VI), and 2,4,6‐triaminopyrimidinium 6‐methoxymethyl‐2‐thiouracilate–6‐methoxymethyl‐2‐thiouracil (1/1), C₄H₈N₅⁺·C₆H₇N₂O₂S⁻·C₆H₈N₂O₂S, (VII). Whereas in (I) only an AA/DD hydrogen‐bonding interaction was formed, the structures of (VI) and (VII) both display the desired ADA/DAD synthon. Conformational studies on the side chains of PTU and MOMTU also revealed a significant deviation for cocrystals (VI) and (VII), leading to the desired enhancement of the hydrogen‐bond pattern within the crystal.     

Hydrogen‐bond motifs in N‐monosubstituted derivatives of barbituric acid: 5‐allyl‐5‐isopropyl‐1‐methylbarbituric acid (enallylpropymal) and 1,5‐di(but‐2‐enyl)‐5‐ethylbarbituric acid

Both title structures exhibit essentially planar barbiturate rings. The crystal structure of enallylpropymal (5‐allyl‐5‐isopropyl‐1‐methylbarbituric acid), C₁₁H₁₆N₂O₃, is composed of centrosymmetric N—H...O hydrogen‐bonded dimers, while 1,5‐di(but‐2‐enyl)‐5‐ethylbarbituric acid, C₁₄H₂₀N₂O₃, forms N—H...O hydrogen‐bonded helical chains. Each of the ten known crystal structures of closely related N‐monosubstituted derivatives of barbituric acid displays one of the fundamental N—H...O hydrogen‐bonded motifs of the two title structures, i.e. either a dimer or a chain.     

One‐Pot Synthesis of Novel Pyrrolo[1,2‐a]quinoxaline‐4(5H)‐ones Using Benzene‐1,2‐diamine,Acetylenedicarboxylates, and β‐Nitrostyrene Derivatives

The reaction between a variety of o‐phenylenediamines (=benzene‐1,2‐diamines), dialkyl acetylenedicarboxylates, and derivatives of nitrostyrene (=(E)‐(2‐nitroethenyl)benzene) in the presence of sulfamic acid (SA; H₃NSO₃) as catalyst led to the corresponding pyrrolo[1,2‐a]quinoxaline‐4(5H)‐one derivatives in high yields.     

A two‐dimensional cadmium(II) coordination polymer constructed from 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate and 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate ligands

Crystals of poly[[aqua[μ₃‐4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylato‐κ⁵O¹O^1′:N³,O⁴:O⁵][μ₄‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylato‐κ⁷N³,O⁴:O⁴,O^4′:O¹,O^1′:O¹]cadmium(II)] monohydrate], {[Cd₂(C₁₅H₁₄N₂O₄)(C₁₆H₁₄N₂O₆)(H₂O)]·H₂O}_n or {[Cd₂(Hcpimda)(cpima)(H₂O)]·H₂O}_n, (I), were obtained from 1‐(4‐carboxybenzyl)‐2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃cpimda) and cadmium(II) chloride under hydrothermal conditions. The structure indicates that in‐situ decarboxylation of H₃cpimda occurred during the synthesis process. The asymmetric unit consists of two Cd²⁺ centres, one 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate (Hcpimda²⁻) anion, one 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate (cpima²⁻) anion, one coordinated water molecule and one lattice water molecule. One Cd²⁺ centre, i.e. Cd1, is hexacoordinated and displays a slightly distorted octahedral CdN₂O₄ geometry. The other Cd centre, i.e. Cd2, is coordinated by seven O atoms originating from one Hcpimda²⁻ ligand and three cpima²⁻ ligands. This Cd²⁺ centre can be described as having a distorted capped octahedral coordination geometry. Two carboxylate groups of the benzoate moieties of two cpima²⁻ ligands bridge between Cd2 centres to generate [Cd₂O₂] units, which are further linked by two cpima²⁻ ligands to produce one‐dimensional (1D) infinite chains based around large 26‐membered rings. Meanwhile, adjacent Cd1 centres are linked by Hcpimda²⁻ ligands to generate 1D zigzag chains. The two types of chains are linked through a μ₂‐η² bidentate bridging mode from an O atom of an imidazole carboxylate unit of cpima²⁻ to give a two‐dimensional (2D) coordination polymer. The simplified 2D net structure can be described as a 3,6‐coordinated net which has a (4³)₂(4⁶.6⁶.8³) topology. Furthermore, the FT–IR spectroscopic properties, photoluminescence properties, powder X‐ray diffraction (PXRD) pattern and thermogravimetric behaviour of the polymer have been investigated.     

NaY Zeolite Functionalized by Sulfamic Acid/Cu(OAc)2 as a Novel and Reusable Heterogeneous Hybrid Catalyst in Efficient Synthesis of Bis,Tris, and Tetrakis(indolyl)methanes, 3,4‐Dihydropyrimidin‐2(1H)‐ones,and 2‐Aryl‐1H‐benzothiazoles

An efficient acid‐catalyzed synthesis of some bis, tris, and tetrakis(indolyl)methanes, 3,4‐dihydropyrimidin‐2(1H )‐ones, and 2‐aryl‐1H ‐benzothiazoles is reported using NaY zeolite functionalized by sulfamic acid/Cu(OAc )₂ (NaY zeolite‐NHSO₃H /Cu(OAc )₂) in excellent yield. The heterogeneous catalyst has a simple work‐up procedure and could be recycled and reused for six reaction cycles.     

Polyaddition of bifunctional 1,3‐benzoxazine and 2‐methylresorcinol

A polyaddition system consisted of a bifunctional N‐n‐propyl benzoxazine and 2‐methylresorcinol ( MR ) that proceeds at ambient temperature has been developed. In this system, the aromatic ring of MR acted as a bifunctional monomer, reacting with a two equivalent amount of benzoxazine moieties via their ring‐opening reaction. The polyaddition gave the corresponding linear polymer bearing phenolic moieties bridged by Mannich‐type linkage in the main chain. The linear polymer had a high glass transition temperature, which was comparable to that of the linear polybenzoxazine synthesized by the ring‐opening polymerization of a monofunctional N‐n‐propyl benzoxazine. The employment of a bifunctional N‐allyl benzoxazine in the polyaddition system resulted in the formation of the corresponding polymer with allyl pendants, which exhibited improved heat resistance due to its thermally induced crosslinking reaction. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3867–3872     

Synthesis of cationic N‐[3‐(dimethylamino)propyl]methacrylamide brushes on silicon wafer via surface‐initiated RAFT polymerization

Surface‐initiated reversible addition‐fragmentation chain transfer (SI‐RAFT) polymerization of N‐[3‐(dimethylamino)propyl]methacrylamide (DMAPMA) on the silicon wafer was conducted in attempt to create controllable cationic polymer films. The RAFT agent‐immobilized substrate was prepared by the silanization of hydroxyl groups on silicon wafer with 3‐aminopropylthriethoxysilane (APTS) and by the amide reaction of amine groups of APTS with ester groups of 4‐cyano‐4‐((thiobenzoyl) sulfanyl) pentanoic succinimide ester (CPSE); followed by the RAFT polymerization of DMAPMA using a “free” RAFT agent, that is, 4‐cyanopentanoic acid dithiobenzoate (CPAD) and an initiator, that is, 4,4′‐azobis‐4‐cyanopentanoic acid (CPA). The formation of homogeneous tethered poly(N‐[3‐(dimethylamino)propyl]methacrylamide) [poly(DMAPMA)] brushes, whose thickness can be tuned by reaction time varying, is evidenced by using the combination of grazing angle attenuated total reflectance‐Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, atomic force microscopy, and water contact‐angle measurements. The calculation of grafting parameters from the number‐average molecular weight, M _n (g/mol) and ellipsometric thickness, h (nm) values indicated the synthesis of densely grafted poly(DMAPMA) films and allowed us to predict a polymerization time for forming a “brush‐like” conformation for the chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Syntheses of N‐[3‐(1‐methyl‐1H‐2‐imidazolyl)propyl]benzamides and N‐[3‐(1‐methyl‐1H‐2‐imidazolyl)propyl]benzenesulfonamides

A series of substituted N‐(4‐substituted‐benzoyl)‐N‐[3‐(1‐methyl‐1H‐imidazol‐2‐yl)propyl]amines ( 13 ) and N‐arylsulfonyl‐N‐[3‐(1‐methyl‐1H‐imidazol‐2‐yl)propyl]amines ( 14 ) were prepared from the reaction of 3‐(1‐methyl‐1H‐imidazol‐2‐yl)propan‐1‐amine ( 7 ) with substituted benzoyl chloride or substituted‐benzene sulfonyl chloride respectively. Compound 7 was prepared by two independent methods.     

Reversed‐phase ion‐pair solid‐phase extraction and ion chromatography analysis of pyrrolidinium ionic liquid cations in environmental water samples

A method of reversed‐phase ion‐pair solid‐phase extraction combined with ion chromatography for determination of pyrrolidinium ionic liquid cations (N‐methyl‐N‐ethyl pyrrolidinium, N‐methyl‐N‐propyl pyrrolidinium, and N‐methyl‐N‐butyl pyrrolidinium) in water samples was developed in this study. First, ion‐pair reagent sodium heptanesulfonate was added to the water samples after static, centrifugation and filteration. Then, pyrrolidinium cations in the samples were enriched and purified by a reversed‐phase solid‐phase extraction column, and eluted from the column with methanol aqueous solution as eluent. Finally, the eluate collected was analyzed by ion chromatography. The separation and direct conductivity detection of these pyrrolidinium cations by ion‐exchange column using 1.0 mM methanesulfonic acid (in water)/acetonitrile (97:3, v:v) as mobile phase was achieved within 10 min. By using this method, pyrrolidinium cations in Songhua River and Hulan River were successfully extracted with the recoveries ranging from 74.2 to 97.1% and the enrichment factor assessed as 60. Pyrrolidinium cations with the concentration of 0.001?0.03 mg/L can be enriched and detected in the water samples. The developed method for the determination of pyrrolidinium ionic liquid cations in water samples is simple and reliable, which provides a reference for the study of the potential impact of ionic liquids on the environment.     

Synthesis of a Novel Series of 2,3‐Disubstituted Quinazolin‐4(3H)‐ones as a Product of a Nucleophilic Attack at C(2) of the Corresponding 4H‐3,1‐Benzoxazin‐4‐one

A new series of 2,3‐disubstituted quinazolin‐4(3H)‐one derivatives was synthesized by nucleophilic attack at C(2) of the corresponding key starting material 2‐propyl‐4H‐3,1‐benzoxazin‐4‐one (Scheme 2). The reaction proceeded via amidinium salt formation (Scheme 3) rather than via an N‐acylanthranilimide. The structure of the prepared compounds were elucidated by physical and spectral data like FT‐IR, ¹H‐NMR, and mass spectroscopy.