Ethylenic acyl cyanides IV : Intramolecular ene cyclisation of 5-methyl-5-hexenoyl cyanides to 3-methyl-2-cyclohexenones

Condensation of methallyltrimethylsilanes with α,β-ethylenic acyl cyanides leads to 5-methyl-5-hexenoyl cyanides which after thermal cyclisation give 3-methyl-2-cyclohexenones and hydrogen cyanide.     

Structures,stabilities, and energies of isomerization of some alkyl cyanides and isocyanides and their corresponding α-cyanocarbonium and α-isocyanocarbonium ions

Ab initio STO -3G geometry-optimized calculations have been performed on methyl, ethyl, and isopropyl cyanides and isocyanides, and the cations formed on abstraction of an α-hydride ion. Stabilization energies of the cations and cyanide–isocyanide isomerization energies have been calculated and correlated with structural features and population analyses.     

Mass spectrometry in structural and stereochemical problems. Part CLIII. Electron impact-promoted fragmentation of n-alkyl cyanides

In spite of previous extensive studies on the mass spectrometry of alkyl cyanides, no good mechanistic insight has as yet been gained into the behavior of straight chain alky1 cyanides. For this reason the possible origins for the principal ions in the mass spectrum of a typical alkyl cyanide (n-hexyl cyanide) have been determined using high resolution mass spectrometry anddeuterium labeling of every carbon atom. The results lead to the conclusion that most of the typical fragmentation processes of n-alkyl cyanides proceed through cyclic intermediates.     

Doubly activated coumarin as a colorimetric and fluorescent chemodosimeter for cyanide

A new α,β-unsaturated nitro group and coumarin conjugate-based fluorescent chemodosimeter 1 was developed for the selective detection of cyanide anions. The chemodosimeter has shown a selective and sensitive response to cyanide anions over other various anions through a nucleophilic aromatic substitution reaction of the cyanide to 1. When cyanide anions were added, the enhanced fluorescence intensity as well as the color changes of 1 was observed so that micromolar concentrations of cyanides were detectable by the naked eye.     

The electron-impact-induced fragmentation of some alkyl isocyanides and α-branched alkyl cyanides

The HRP mass spectra of some alkyl isocyanides (R? NC in which R equals CH₃, C₂H₅, n-C₃H₇, n-C₄H₉ and t-C₄H₉) and two methyl branched alkyl cyanides (R? CN in which R equals i-C₃H₇ and t-C₄H₉) have been studied. Using metastable ion transitions and appearance potentials, the fragmentation patterns and spectral characteristics of the isocyanides can be given. A comparison has been made with the mass spectral data of the corresponding cyanides. Although the mass spectra of alkyl cyanides and isocyanides show close relationship, evidence could be obtained that this resemblance is not caused by rearrangement of the isocyanide into cyanide molecules. The main difference between the spectra of both compounds is caused by the strength of the α-bond, being weaker in the case of the isocyanides. The abundance of ions formed by α-bond cleavage decreases with increasing size of the alkyl group.     

“In situ” radiation cleaning of underground water contaminated with cyanides - six years of experience

The locality of underground water, contaminated with cyanides, has been successfully cleaned by using the hydraulic barrier method (assembly of pumped wells) since 1986. The average cyanide concentrations in the outflow exceeded 35 m per litre. Contamination had to be eliminated before the discharge into the sewer system. The radiation approach “in situ” i.e. decomposition of cyanides by barrier, was applied and is still being used today. The cyanide concentration was lowered more than one order of magnitude. This process was approved by the Czechoslovak radiation security authorities and further applications of “in Situ” regeneration of underground water contamination is anticipated.     

Removal of cyanides by electrooxidation

The paper describes a study on electro-oxidation of cyanides complexed with copper, present in metal plating wastewater. A detailed voltammetric study has indicated that formation in situ of the electrocatalytic film of copper oxide and electro-oxidation of cyanides probably occurs at the same anode potential. By contrary to other materials at which electro-oxidation of cyanide also occurs, at copper oxide elimination of cyanide occurs at a potential lower then the potential of hydroxide ion discharge.     

Determination of cyanides by continuous distillation and flow analysis with cylindrical amperometric electrodes

A continuous system for the determination of free and complex cyanides has been developed. Hydrogen cyanide is released in an acidic solution in a counter-current system operated by a peristaltic pump, absorbed in dilute sodium hydroxide and then fed into the amperometric detector with a cylindrical silver flow-through electrode. The parameters affecting the release and absorption of cyanide, as well as the electrode response and sensitivity, are described. Differentiation between total cyanide and strongly bound metal cyanide complexes is achieved by u.v. decomposition of the complexes.     

A new strategy for utilizing activated CH-group to construct a FRET platform for ratiometric sensing of cyanides

A fluorescent and colorimetric cyanide sensor (4-Br) based on the activated C-H group to conscruct a FRET platform has been described for the first time, along with demonstration of selective and reversible detection of cyanides through it. The sensing mechanism of 4-Br is an integration of ICT and FRET mechanisms, based on the deprotonation of the activated C-H group. Importantly, it is suitable for fluorescence imaging of cyanides in living cell.     

Coulometric Determination of Total Cyanide in Effluent and Wastewater

Abstract

A simple procedure for the determination of low levels of total cyanide in effluent samples has been developed. After distillation of the cyanide from the sample, as hydrocyanic acid, the cyanide is determined with coulometrically generated iodine using a biamperometric end point detection system. As little as 0.06mg/l total cyanide can be measured using the procedure. The method obviates the need for calibration curves and does not require special reagents.

Silver (I) was determined to be an effective catalyst for the decomposition of bound cyanides in the distillation procedure.     

Tributyltin cyanide: A facile cyanating agent of acyl chlorides

Tributyltin cyanide was prepared from tributyltin chloride and potassium cyanide, and was found to be an efficient cyanation agent for acyl chlorides to give acyl cyanides in excellent yields.     

Organosilicon and organophosphorus compounds with pseudohalogen groups. 1. Synthesis of alkoxydimethylsilyl cyanides and their reactions with metal fluorides

Alkoxydimethylsilyl cyanides were synthesized by the exchange reaction of the corresponding alkoxydimethylchlorosilanes with trimethylsilyl cyanide, and also by the reaction of the former compounds with HCN in the presence of triethylamine (the latter method is preferential). Reactions of silyl cyanides with SbF₃ and ZnF₂ were studied. It was found that the reaction of silyl cyanides with SBF₃ leads to the formation of Me₂SiF₂ and the corresponding alkoxydimethylfluorosilanes, which were also obtained by counter-synthesis from alkoxydimethylsilylchlorosilanes and metal fluorides (SbF₃, ZnF₂, CsF). Dimethylfluorosilyl cyanide was obtained by the reaction of silyl cyanides with ZnF₂.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1593–1587, July, 1991.     

The Chemistry of Acyl Cyanides

Through improved and novel syntheses, acyl cyanides—especially aliphatic acyl cyanides—have become so readily accessible that numerous synthetic applications present themselves. The present review surveys the development of the chemistry of the acyl cyanides during the last 25 years. The syntheses and most important reaction possibilities of R? CO? CN are outlined in four large schemes: reactions of the CO- and CN-groups—in each case with preservation of the carbon skeletal framework—as well as acylations with cleavage of cyanide ions.     

Determination of free cyanide and zinc cyanide complex by capillary electrophoresis

A capillary electrophoretic (CE) protocol was developed for the separation and quantification of free cyanide and zinc cyanide complex, two key species in gold cyanidation of zinc-bearing sulfidic ores. Several common carrier electrolytes were implemented in an indirect UV detection method. The effect of electric field strength, injection volume, concentration of electro-osmotic flow (EOF) modifier and UV-absorbing agent in background electrolyte (BGE) was examined while peak height, peak area and noise were considered for optimization. The best results were obtained using a BGE that contained 35 mM sodium chromate, 12 mM free cyanide and 0.45 mM hexamethonium bromide at pH 10.5. Free cyanide concentration was compared to that measured with the conventional silver nitrate titration method in solutions containing free cyanides and weak cyano-complexes. The developed CE protocol proved very robust in capturing the concentration of free cyanides (4% error) unlike the titration method which exhibited substantial sensitivity to the interfering weak cyano-complexes (38% error).     

Complex Formation Between Hydroxy Naphthol Blue and First Row Transition Metal Cyanide Complexes

Abstract

It has been found that cyanide complexes of first row transition metal elements exhibit enhanced binding to hydroxy naphthol blue (HNB) relative to the binding of corresponding aquo-ions. HNB forms a 2:1 complex with Fe³⁺ and Cu²⁺ cyanides, and 1:1 complexes with all other transition metal cyanide complexes studied; formation constants have been calculated from the spectrophotometric data in each case. It is possible to use HNB as a spectrophotometric reagent for transition metal cyanide complexes, lower limits of detection being determined for each complex.     

Highly selective sensing of cyanide by a benzochromene-based ratiometric fluorescence probe

Enone-functionalized benzochromene chemodosimeter (1) was prepared through the Baylis-Hillman condensation reaction and was utilized as a ratiometric fluorescence probe for cyanide anions in aqueous buffer. The probe has shown a selective and sensitive response to cyanides over other various anions through the Michael addition and a subsequent [1,3]-sigmatropic rearrangement reaction. When cyanide anions were added, a prominent ratiometric fluorescence change of 1 was observed thus allowing to detect the micromolar concentration of cyanides by the naked eye.     

Application of hydrocyanic acid vapor generation via focused microwave radiation to the preparation of industrial effluent samples prior to free and total cyanide determinations by spectrophotometric flow injection analysis

A sample preparation procedure for the quantitative determination of free and total cyanides in industrial effluents has been developed that involves hydrocyanic acid vapor generation via focused microwave radiation. Hydrocyanic acid vapor was generated from free cyanides using only 5 min of irradiation time (90 W power) and a purge time of 5 min. The HCN generated was absorbed into an accepting NaOH solution using very simple glassware apparatus that was appropriate for the microwave oven cavity. After that, the cyanide concentration was determined within 90 s using a well-known spectrophotometric flow injection analysis system. Total cyanide analysis required 15 min irradiation time (90 W power), as well as chemical conditions such as the presence of EDTA–acetate buffer solution or ascorbic acid, depending on the effluent to be analyzed (petroleum refinery or electroplating effluents, respectively). The detection limit was 0.018 mg CN l⁻¹ (quantification limit of 0.05 mg CN l⁻¹), and the measured RSD was better than 8% for ten independent analyses of effluent samples (1.4 mg l⁻¹ cyanide). The accuracy of the procedure was assessed via analyte spiking (with free and complex cyanides) and by performing an independent sample analysis based on the standard methodology recommended by the APHA for comparison. The sample preparation procedure takes only 10 min for free and 20 min for total cyanide, making this procedure much faster than traditional methodologies (conventional heating and distillation), which are time-consuming (they require at least 1 h). Samples from oil (sour and stripping tower bottom waters) and electroplating effluents were analyzed successfully.     

A novel stereospecific synthesis of glycosyl cyanides from 1,2-O-sulfinyl derivatives

[reaction: see text] An efficient synthesis of 1,2-trans-glycosyl cyanides via 1,2-O-sulfinyl monosaccharides is described. Such S(N)2-type displacements at the anomeric center are stereospecific and are best performed with sodium cyanide in the presence of ytterbium triflate. Significantly, the resulting 1,2-trans-glycosyl cyanides have a free hydroxyl group at C-2 ready for further modification.     

A novel cyanide chemodosimeter based on trifluoroacetamide benzhydrol-2 as binding motif: importance of substituent positioning on intra-molecular charge transfer

The nucleophilic nature of cyanide is used to develop a simple, sensitive, and highly effective sensor. Azo dye 6a based on 2-(trifluoroacetamide) benzhydrol-2 (2-TFAB) as anions receptor, presents a new way to build molecular color sensors for cyanide in water. The 2-TFAB moiety of the dye 6a is used as receptor group for cyanides and linked directly by dominant reversible covalent bonding over hydrogen bonding, confirmed by the inactivity of the derivative 6b toward cyanides.     

Reaction of arylthallium (III) compounds with Copper (II) and (I) cyanides. Synthesis of aryl cyanide

Various kinds of arylthallium(III) salts react with copper (II) or (I) cyanide in acetonitrile or pyridine to give the corresponding aryl cyanides in good yield. In acrylonitrile the reaction using copper(I) cyanide was revealed to be of an ionic concerted intermolecular and not radical type.