Structure of the Sulfoxide Synthase EgtB from the Ergothioneine Biosynthetic Pathway

The non‐heme iron enzyme EgtB catalyzes O₂‐dependent C? S bond formation between γ‐glutamyl cysteine and N‐α‐trimethyl histidine as the central step in ergothioneine biosynthesis. Both, the catalytic activity and the architecture of EgtB are distinct from known sulfur transferases or thiol dioxygenases. The crystal structure of EgtB from Mycobacterium thermoresistibile in complex with γ‐glutamyl cysteine and N‐α‐trimethyl histidine reveals that the two substrates and three histidine residues serve as ligands in an octahedral iron binding site. This active site geometry is consistent with a catalytic mechanism in which C? S bond formation is initiated by an iron(III)‐complexed thiyl radical attacking the imidazole ring of N‐α‐trimethyl histidine.     

A cytochrome c variant resistant to heme degradation by hydrogen peroxide

BACKGROUND: Cytochrome c has peroxidase-like activity and can catalyze the oxidation of a variety of organic substrates, including aromatic, organosulfur and lipid compounds. Like peroxidases, cytochrome c is inactivated by hydrogen peroxide. During this inactivation the heme prosthetic group is destroyed. RESULTS: Variants of the iso-1-cytochrome c were constructed by site-directed mutagenesis and were found to be more stable in the presence of hydrogen peroxide than the wild type. No heme destruction was detected in a triple variant (Tyr67-->Phe/Asn52-->Ile/Cys102-->Thr) with the catalytic hydrogen peroxide concentration of 1 mM, even following the loss of catalytic activity, whereas both double variants Tyr67-->Phe/Cys102-->Thr and Asn52-->Ile/Cys102-->Thr showed a greater rate of peroxide-induced heme destruction than observed with the wild-type protein. CONCLUSIONS: Heme destruction and catalytic inactivation are two independent processes. An internal water molecule (Wat166) is shown to be important in the heme destruction process. The absence of a protein radical in the resistant variant suggests that the protein radical is necessary in the heme destruction process, but presumably is not involved in the reactions leading up to the protein inactivation.     

Differences and Comparisons of the Properties and Reactivities of Iron(III)–hydroperoxo Complexes with Saturated Coordination Sphere

Heme and nonheme monoxygenases and dioxygenases catalyze important oxygen atom transfer reactions to substrates in the body. It is now well established that the cytochrome P450 enzymes react through the formation of a high‐valent iron(IV)–oxo heme cation radical. Its precursor in the catalytic cycle, the iron(III)–hydroperoxo complex, was tested for catalytic activity and found to be a sluggish oxidant of hydroxylation, epoxidation and sulfoxidation reactions. In a recent twist of events, evidence has emerged of several nonheme iron(III)–hydroperoxo complexes that appear to react with substrates via oxygen atom transfer processes. Although it was not clear from these studies whether the iron(III)–hydroperoxo reacted directly with substrates or that an initial O?O bond cleavage preceded the reaction. Clearly, the catalytic activity of heme and nonheme iron(III)–hydroperoxo complexes is substantially different, but the origins of this are still poorly understood and warrant a detailed analysis. In this work, an extensive computational analysis of aromatic hydroxylation by biomimetic nonheme and heme iron systems is presented, starting from an iron(III)–hydroperoxo complex with pentadentate ligand system (L₅²). Direct C?O bond formation by an iron(III)–hydroperoxo complex is investigated, as well as the initial heterolytic and homolytic bond cleavage of the hydroperoxo group. The calculations show that [(L₅²)Fe^III(OOH)]²⁺ should be able to initiate an aromatic hydroxylation process, although a low‐energy homolytic cleavage pathway is only slightly higher in energy. A detailed valence bond and thermochemical analysis rationalizes the differences in chemical reactivity of heme and nonheme iron(III)–hydroperoxo and show that the main reason for this particular nonheme complex to be reactive comes from the fact that they homolytically split the O?O bond, whereas a heterolytic O?O bond breaking in heme iron(III)–hydroperoxo is found.     

Direct Electron Transfer and Bioelectrocatalysis by a Hexameric,Heme Protein at Nanostructured Electrodes

A nanohybrid consisting of poly(3‐aminobenzenesulfonic acid‐co‐aniline) and multiwalled carbon nanotubes [MWCNT‐P(ABS‐A)]) on a gold electrode was used to immobilize the hexameric tyrosine‐coordinated heme protein (HTHP). The enzyme showed direct electron transfer between the heme group of the protein and the nanostructured surface. Desorption of the noncovalently bound heme from the protein could be excluded by control measurements with adsorbed hemin on aminohexanthiol‐modified electrodes. The nanostructuring and the optimised charge characteristics resulted in a higher protein coverage as compared with MUA/MU modified electrodes. The adsorbed enzyme shows catalytic activity for the cathodic H₂O₂ reduction and oxidation of NADH.     

A comparative study on the catalytic performance of heme and non‐heme catalysts: Metal porphyrins versus metal Schiff bases

Catalytic activity and oxidative stability of a series of iron and manganese porphyrins with 2‐chlorophenyl, phenyl and 4‐methoxyphenyl at the meso positions and metallosalens (Mn‐ and Fe‐salens) including N,N′‐bis(salicylidene)ethylenediamine, N,N′‐bis(5‐ chlorosalicylidene)ethylenediamine and N,N′‐bis(2,4‐dihydroxysalicylidene)ethylenediamine for the oxidation of olefins with tetra‐n‐butylammonium periodate (TBAP) and tetra‐n‐butyl‐ammonium Oxone (TBAO) have been investigated and compared. Although the metalloporphyrins showed an increased catalytic activity relative to the Schiff base complexes, the former provided no significant catalytic advantage over the latter. Also, a comparable or slightly higher oxidative stability was observed for the Schiff base complexes under the reaction conditions. Furthermore, in spite of large difference between the oxidizing ability of TBAO and TBAP, similar patterns were observed for the order of catalytic activity and oxidative stability of the used heme and non‐heme catalysts. The introduction of a methyl group at the ɑ position of styrene led to an increase in its reactivity, indicating the dominance of electronic effects over the steric ones in these catalytic systems.     

Spectroscopic Observation of Calcium‐Induced Reorientation of Cellobiose Dehydrogenase Immobilized on Electrodes and its Effect on Electrocatalytic Activity

Cellobiose dehydrogenase catalyzes the oxidation of various carbohydrates and is considered as a possible anode catalyst in biofuel cells. It has been shown that the catalytic performance of this enzyme immobilized on electrodes can be increased by presence of calcium ions. To get insight into the Ca²⁺‐induced changes in the immobilized enzyme we employ surface‐enhanced vibrational (SERR and SEIRA) spectroscopy together with electrochemistry. Upon addition of Ca²⁺ ions electrochemical measurements show a shift of the catalytic turnover signal to more negative potentials while SERR measurements reveal an offset between the potential of heme reduction and catalytic current. Comparing SERR and SEIRA data we propose that binding of Ca²⁺ to the heme induces protein reorientation in a way that the electron transfer pathway of the catalytic FAD center to the electrode can bypass the heme cofactor, resulting in catalytic activity at more negative potentials.     

Mechanistic Insights into Copper‐Catalyzed Sonogashira–Hagihara‐Type Cross‐Coupling Reactions: Sub‐Mol % Catalyst Loadings and Ligand Effects

An efficient catalytic system for Sonogashira–Hagihara‐type reactions displaying ligand acceleration in the copper‐catalyzed formation of C(sp²)? C(sp) bonds is described. The structure of the ligand plays a key role for the coupling efficiency. Various copper sources show excellent catalytic activity, even in sub‐mol % quantities. A wide variety of substituents is tolerated in the substrates. Mechanistic details have been revealed by kinetic measurements and DFT calculations.     

Novel Conformational Transitions of Human Cytochrome P450 2C8 during Thermal and Acid-induced Unfolding

Transitions among various heme coordination/spin states, heme environments and protein conformations of human cytochrome P450 2C8 were investigated under different denaturing conditions by means of electronic absorption and circular dichroism spectroscopies. It is the first report of it's kind. Our results indicated that the thermal and acid‐induced denaturation could convert P450 2C8 to various P420 forms. In the thermal unfolding process, the ferric P420 thermal form emerged with weakened Fe‐S (thiolate) bond. An absorption band at ca. 425 nm of the ferrous P420 2C8 thermal form was observed, suggesting that the axial Cys435 was protonated or displaced by other ligand. Moreover, the new coordination bond was stabilized when the temperature was cooled down. When binding with CO, the ferrous P420 2C8 thermal form had the protonated thiol of Cys435 as the axial ligand. X‐ray structure of P450 2C8 suggested that the specific structure of the β‐bulge where the axial cysteine ligand located might be the reason of the formation of these P420 2C8 thermal forms. In the acid‐induced unfolding studies, we found that at pH 3.0 the heme could be irreversibly released from the heme pocket of ferric and ferrous P450 2C8. Interestingly, the released heme could form a new coordination bond with an unidentified ligand at the surface of partially unfolded protein when binding with CO at reduced state.     

Precise Design of Artificial Cofactors for Enhancing Peroxidase Activity of Myoglobin: Myoglobin Mutant H64D Reconstituted with a “Single‐Winged Cofactor” Is Equivalent to Native Horseradish Peroxidase in Oxidation Activity

H64D myoglobin mutant was reconstituted with two different types of synthetic hemes that have aromatic rings and a carboxylate‐based cluster attached to the terminus of one or both of the heme‐propionate moieties, thereby forming a “single‐winged cofactor” and “double‐winged cofactor,” respectively. The reconstituted mutant myoglobins have smaller K_m values with respect to 2‐methoxyphenol oxidation activity relative to the parent mutant with native heme. This suggests that the attached moiety functions as a substrate‐binding domain. However, the k_cat value of the mutant myoglobin with the double‐winged cofactor is much lower than that of the mutant with the native heme. In contrast, the mutant reconstituted with the single‐winged cofactor has a larger k_cat value, thereby resulting in overall catalytic activity that is essentially equivalent to that of the native horseradish peroxidase. Enhanced peroxygenase activity was also observed for the mutant myoglobin with the single‐winged cofactor, thus indicating that introduction of an artificial substrate‐binding domain at only one of the heme propionates in the H64D mutant is the optimal engineering strategy for improving the peroxidase activity of myoglobin.     

Characterization of conformational changes and noncovalent complexes of myoglobin by electrospray ionization mass spectrometry,circular dichroism and fluorescence spectroscopy

Electrospray ionization mass spectrometry (ESI‐MS) was employed to monitor the heme release and the conformational changes of myoglobin (Mb) under different solvent conditions, and to observe ligand bindings of Mb. ESI‐MS, complemented by circular dichroism and fluorescence spectroscopy, was used to study the mechanism of acid‐ and organic solvent‐induced denaturation by probing the changes in the secondary and the tertiary structure of Mb. The results obtained show that complete disruption of the heme–protein interactions occurs when Mb is subjected to one of the following solution conditions: pH 3.2–3.6, or solution containing 20–30% acetonitrile or 40–50% methanol. Outside these ranges, Mb is present entirely in its native state (binding with a heme group) or as apomyoglobin (i.e. without the heme). Spectroscopic data demonstrate that the denaturation mechanism of Mb induced by acid may be significantly different from that by the organic solvent. Low pH reduces helices in Mb, whereas certain organic content level in solution results in the loss of the tertiary structure. ESI‐MS conditions were established to observe the H₂O‐ and CO‐bound Mb complexes, respectively. H₂O binding to metmyoglobin (17 585 Da), where the heme iron is in the ferric oxidation state, is observed in ESI‐MS. CO binding to Mb (17 595 Da), on the other hand, can be only observed after the heme iron is reduced to the ferrous form. Therefore, ESI‐MS combined with spectroscopic techniques provides a useful means for probing the formation of ligand‐binding complexes and characterizing protein conformational changes. Copyright © 2010 John Wiley & Sons, Ltd.     

Reversible Formation of a Light‐Responsive Catalyst by Utilizing Intermolecular Cooperative Effects

A photoresponsive system where structure formation is coupled to catalytic activity is presented. The observed catalytic activity is reliant on intermolecular cooperative effects that are present when amphiphiles assemble into vesicular structures. Photoresponsive units within the amphiphilic pre‐catalysts allow for switching between assembled and disassembled states, thereby modulating the catalytic activity. The ability to reversibly form cooperative catalysts within a dynamic self‐assembled system represents a conceptually new tool for the design of complex artificial systems in water.     

De Novo Design,Synthesis and Characterisation of MP3, A New Catalytic Four‐Helix Bundle Hemeprotein

A new artificial metalloenzyme, MP3 (MiniPeroxidase 3), designed by combining the excellent structural properties of four‐helix bundle protein scaffolds with the activity of natural peroxidases, was synthesised and characterised. This new hemeprotein model was developed by covalently linking the deuteroporphyrin to two peptide chains of different compositions to obtain an asymmetric helix–loop–helix/heme/helix–loop–helix sandwich arrangement, characterised by 1) a His residue on one chain that acts as an axial ligand to the iron ion; 2) a vacant distal site that is able to accommodate exogenous ligands or substrates; and 3) an Arg residue in the distal site that should assist in hydrogen peroxide activation to give an HRP‐like catalytic process. MP3 was synthesised and characterised as its iron complex. CD measurements revealed the high helix‐forming propensity of the peptide, confirming the appropriateness of the model procedure; UV/Vis, MCD and EPR experiments gave insights into the coordination geometry and the spin state of the metal. Kinetic experiments showed that Fe^III–MP3 possesses peroxidase‐like activity comparable to R38A–hHRP, highlighting the possibility of mimicking the functional features of natural enzymes. The synergistic application of de novo design methods, synthetic procedures, and spectroscopic characterisation, described herein, demonstrates a method by which to implement and optimise catalytic activity for an enzyme mimetic.     

Striking Improvement in Peroxidase Activity of Cytochrome c by Modulating Hydrophobicity of Surface‐Functionalized Gold Nanoparticles within Cationic Reverse Micelles

This work demonstrates a remarkable enhancement in the peroxidase activity of mitochondrial membrane protein cytochrome c (cyt c) by perturbing its tertiary structure in the presence of surface‐functionalised gold nanoparticles (GNPs) within cetyltrimethylammonium bromide (CTAB) reverse micelles. The loss in the tertiary structure of cyt c exposes its heme moiety (which is buried inside in the native globular form), which provides greater substrate (pyrogallol and H₂O₂) accessibility to the reactive heme residue. The surfactant shell of the CTAB reverse micelle in the presence of co‐surfactant (n‐hexanol) exerted higher crowding effects on the interfacially bound cyt c than similar anionic systems. The congested interface led to protein unfolding, which resulted in a 56‐fold higher peroxidase activity of cyt c than that in water. Further perturbation in the protein’s structure was achieved by doping amphiphile‐capped GNPs with varying hydrophobicities in the water pool of the reverse micelles. The hydrophobic moiety on the surface of the GNPs was directed towards the interfacial region, which induced major steric strain at the interface. Consequently, interaction of the protein with the hydrophobic domain of the amphiphile further disrupted its tertiary structure, which led to better opening up of the heme residue and, thereby, superior activity of the cyt c. The cyt c activity in the reverse micelles proportionately enhanced with an increase in the hydrophobicity of the GNP‐capping amphiphiles. A rigid cholesterol moiety as the hydrophobic end group of the GNP strikingly improved the cyt c activity by up to 200‐fold relative to that found in aqueous buffer. Fluorescence studies with both a tryptophan residue (Trp59) of the native protein and the sodium salt of fluorescein delineated the crucial role of the hydrophobicity of the GNP‐capping amphiphiles in improving the peroxidase activity of cyt c by unfolding its tertiary structure within the reverse micelles.     

Investigation of the Substrate Range of CYP199A4: Modification of the Partition between Hydroxylation and Desaturation Activities by Substrate and Protein Engineering

The cytochrome P450 enzyme CYP199A4, from Rhodopseudomonas palustris HaA2, can efficiently demethylate 4‐methoxybenzoic acid. It is also capable of oxidising a range of other related substrates. By investigating substrates with different substituents and ring systems we have been able to show that the carboxylate group and the nature of the ring system and the substituent are all important for optimal substrate binding and activity. The structures of the veratric acid, 2‐naphthoic acid and indole‐6‐carboxylic acid substrate‐bound CYP199A4 complexes reveal the substrate binding modes and the side‐chain conformational changes of the active site residues to accommodate these larger substrates. They also provide a rationale for the selectivity of product oxidation. The oxidation of alkyl substituted benzoic acids by CYP199A4 is more complex, with desaturation reactions competing with hydroxylation activity. The structure of 4‐ethylbenzoic acid‐bound CYP199A4 revealed that the substrate is held in a similar position to 4‐methoxybenzoic acid, and that the C^β C? H bonds of the ethyl group are closer to the heme iron than those of the C^α (3.5 vs. 4.8 Å). This observation, when coupled to the relative energies of the reaction intermediates, indicates that the positioning of the alkyl group relative to the heme iron may be critical in determining the amount of desaturation that is observed. By mutating a single residue in the active site of CYP199A4 (Phe185) we were able to convert the enzyme into a 4‐ethylbenzoic acid desaturase.     

Spectroscopic and Electrochemical Characterization of Cytochrome P450st‐DDAB Films on a Plastic‐Formed Carbon Electrode

We have studied the characterization of thermophilic cytochrome P450 (P450st)‐didodecyldimethylammonium bromide (DDAB) films by using UV‐vis absorption, resonance Raman spectroscopy, and electrochemical methods. The observed Raman spectrum indicated near‐native conformation of the heme iron in DDAB film on the surface of a glass slide, while on the surface of a plastic‐formed carbon (PFC) electrode, the conformation of P450st‐DDAB was very similar to that of heme‐DDAB film, suggesting the release of heme from P450st in DDAB films on PFC electrodes. When NaBr was added as salt to the casting solution, the result of Raman spectrum indicated near‐native conformation of P450st in DDAB film even on the PFC electrode, but no redox potential of P450st which has near native structure was observed. This study suggests the essential experimental conditions when working with heme protein‐DDAB films as, in some cases, heme iron from proteins is released on the surface of the electrode.     

Probing Selectivity and Creating Structural Diversity Through Hybrid Polyketide Synthases

Engineering polyketide synthases (PKS) to produce new metabolites requires an understanding of catalytic points of failure during substrate processing. Growing evidence indicates the thioesterase (TE) domain as a significant bottleneck within engineered PKS systems. We created a series of hybrid PKS modules bearing exchanged TE domains from heterologous pathways and challenged them with both native and non‐native polyketide substrates. Reactions pairing wildtype PKS modules with non‐native substrates primarily resulted in poor conversions to anticipated macrolactones. Likewise, product formation with native substrates and hybrid PKS modules bearing non‐cognate TE domains was severely reduced. In contrast, non‐native substrates were converted by most hybrid modules containing a substrate compatible TE, directly implicating this domain as the major catalytic gatekeeper and highlighting its value as a target for protein engineering to improve analog production in PKS pathways.     

Palladated halloysite hybridized with photo‐polymerized hydrogel in the presence of cyclodextrin: An efficient catalytic system benefiting from nanoreactor concept

Considering the excellent performance of halloysite as a catalyst support and in an attempt to benefit from the concept of nanoreactors in the catalysis, an innovative catalytic system has been designed, in which acrylamide and bis‐acrylamide were photo‐polymerized in the presence of palladated halloysite. The novel precipitation photo‐polymerization method avoided the formation of an extended polymeric network, but led to the formation of co‐polymer on the halloysite periphery. The co‐polymer exhibited good swellability in aqueous media and formed hydrogel. This hydrophilic environment around catalytic palladated halloysite can be considered as a nanoreactor that can concentrate the substrate and bring them into the vicinity of the palladated halloysite. This catalytic system was used for promoting hydrogenation of hydrophobic nitro arenes in aqueous media. To avoid immiscibility of hydrophobic substrates and hydrophilic nature of the nanoreactor, that emerged from swelling of hydrogel, β‐cyclodextrin (CD) was utilized as phase transfer agent. The results confirmed high catalytic activity of this catalytic system. Even highly hydrophobic substrates could tolerate hydrogenation under this protocol to furnish the corresponding product in high yield. Finally, the contribution of both CD and hydrogel to the catalysis was confirmed. Moreover, studying the recyclability of the catalyst as well as Pd leaching proved the high recyclability of the catalyst and low leaching of Pd nanoparticles.     

Spin Crossover in Nitrito‐Myoglobin as Revealed by Resonance Raman Spectroscopy

The myoglobin (Mb) heme Fe‐O‐N=O and heme Fe‐O‐N=O/2‐nitrovinyl species have been characterized by resonance Raman spectroscopy. In the heme Fe‐O‐N=O species, the bound nitrite ligand is removed by solvent exchange, thus reforming metmyoglobin (metMb). The high‐spin heme Fe‐O‐N=O unit is converted into a low‐spin heme Fe‐O‐N=O/2‐nitrovinyl species that can be reversibly switched between a low‐ and a high‐spin state without removing the bound nitrite ligand, as observed in the case of the heme Fe‐O‐N=O species. This spin‐state change is likely to be accompanied by a general structural rearrangement in the protein‐binding pocket. This example is the first of a globin protein that can reversibly change its metal spin state through an internal perturbation. These findings provide a basis for understanding the structure–function relationship of the spin cross found in other metalloenzymes and Fe^III–porphyrin complexes.     

Protein‐Templated Formation of an Inhibitor of the Blood Coagulation Factor Xa through a Background‐Free Amidation Reaction

Protein‐templated reactions enable the target‐guided formation of protein ligands from reactive fragments, ideally with no background reaction. Herein, we investigate the templated formation of amides. A nucleophilic fragment that binds to the coagulation factor Xa was incubated with the protein and thirteen differentially activated dipeptides. The protein induced a non‐catalytic templated reaction for the phenyl and trifluoroethyl esters; the latter was shown to be a completely background‐free reaction. Starting from two fragments with millimolar affinity, a 29 nm superadditive inhibitor of factor Xa was obtained. The fragment ligation reaction was detected with high sensitivity by an enzyme activity assay and by mass spectrometry. The reaction progress and autoinhibition of the templated reaction by the formed ligation product were determined, and the structure of the protein–inhibitor complex was elucidated.     

Effects of Coke Deposits on the Catalytic Performance of Large Zeolite H‐ZSM‐5 Crystals during Alcohol‐to‐Hydrocarbon Reactions as Investigated by a Combination of Optical Spectroscopy and Microscopy

The catalytic activity of large zeolite H‐ZSM‐5 crystals in methanol (MTO) and ethanol‐to‐olefins (ETO) conversions was investigated and, using operando UV/Vis measurements, the catalytic activity and deactivation was correlated with the formation of coke. These findings were related to in situ single crystal UV/Vis and confocal fluorescence micro‐spectroscopy, allowing the observation of the spatiotemporal formation of intermediates and coke species during the MTO and ETO conversions. It was observed that rapid deactivation at elevated temperatures was due to the fast formation of aromatics at the periphery of the H‐ZSM‐5 crystals, which are transformed into more poly‐aromatic coke species at the external surface, preventing the diffusion of reactants and products into and out of the H‐ZSM‐5 crystal. Furthermore, we were able to correlate the operando UV/Vis spectroscopy results observed during catalytic testing with the single crystal in situ results.