Trigonal bipyramidal geometry and tridentate coordination mode of the tripod in FeCl(2) complexes with tris(2-pyridylmethyl)amine derivatives bis-alpha-substituted with bulky groups. structures and spectroscopic comparative studies

A series of dichloroferrous complexes with ligands derived from the tris(2-pyridylmethyl)amine tripod has been prepared and characterized. The X-ray crystal structures of the complexes [bis(2-bromo-6-pyridylmethyl)(2-pyridylmethyl)amine]Fe(II)Cl(2) ((Br(2)TPA)Fe(II)Cl(2)) and [bis(2-phenyl-6-pyridylmethyl)(2-pyridylmethyl)amine]Fe(II)Cl(2), ((Ph(2)TPA)Fe(II)Cl(2)) are reported. In these complexes, the tripod coordinates in the tridentate mode, with a substituted pyridyl arm dangling away from the metal. Both complexes have a trigonal bipyramidal iron center with two equatorial chloride ions. Their crystal structures are compared with those of the [tris(2-pyridylmethyl)amine]Fe(II)Cl(2) and [(2-bromo-6-pyridylmethyl)bis(2-pyridylmethyl)amine]Fe(II)Cl(2) complexes ((TPA)Fe(II)Cl(2) and (BrTPA)Fe(II)Cl(2), respectively) in which the ligand coordinates in the tetradentate mode. For all complexes, the metal to ligand distances are systematically above the value of 2.0 A, and (1)H NMR displays paramagnetically shifted resonances with short relaxation times. This indicates that the iron is in a high-spin state. Electric conductivity measurements show that, for all complexes, the measured values lie within the same range, significantly below those expected for ionic complexes. Together with the analysis of the UV-visible and NMR data, this strongly suggests that the coordination mode of the tripod is retained in solution.     

Syntheses, characterization, and catalytic ability in alkane oxygenation of chloro(dimethyl sulfoxide)ruthenium(II) complexes with tris(2-pyridylmethyl)amine and its derivatives

New ruthenium(II) complexes having a tetradentate ligand such as tris(2-pyridylmethyl)amine (TPA), tris[2-(5-methoxycarbonyl)pyridylmethyl]amine [5-(MeOCO)3-TPA], tris(2-quinolylmethyl)amine (TQA), or bis(2-pyridylmethyl)glycinate (BPG) have been prepared. The reaction of the ligand with [RuCl2(Me2SO)4] resulted in a mixture of trans and cis isomers of the chloro(dimethyl sulfoxide-kappaS)ruthenium(II) complexes containing a TPA or a BPG, whereas a trans(Cl,N(amino)) isomer was selectively obtained for 5-(MeOCO)3-TPA and TQA. The trans and cis isomers of the [RuCl(TPA)(Me2SO)]+ complex were easily separated by fractional recrystallization. The molecular structures of trans- and cis(Cl,N(amino))-[RuCl(TPA)(Me2SO)]+ complexes and the trans(Cl,N(amino))-[RuCl{5-(MeOCO)3-TPA}(Me2SO)]+ complex have been determined by X-ray structural analyses. The reaction of TPA with [RuCl2(PhCN)4] gave a single isomer of the chloro(benzonitrile)ruthenium(II) complex, whereas the bis(benzonitrile)ruthenium(II) complex was obtained with BPG. The cis(Cl,N(amino))-[RuCl(TPA)(Me2SO)]+ complex is thermodynamically much less stable than the trans isomer and isomerizes in dimethyl sulfoxide at 65-100 degrees C. Oxygenation of alkanes catalyzed by these ruthenium(II) complexes has been examined. The chloro(dimethyl sulfoxide-kappaS)ruthenium(II) complexes with TPA and its derivatives using m-chloroperbenzoic acid as a cooxidant showed high catalytic ability. Adamantane was efficiently and selectively oxidized to give 1-adamantanol up to 88%. The chloro(dimethyl sulfoxide-kappaS)ruthenium(II) complex with 5-(MeOCO)3-TPA was found to be the most active catalyst among the complexes examined.     

Ligand effect on reversible conversion between copper(I) and bis(mu-oxo)dicopper(III) complex with a sterically hindered tetradentate tripodal ligand and monooxygenase activity of bis(mu-oxo)dicopper(III) complex

A new sterically hindered tetradentate tripodal ligand (Me2-etpy) and its labeled analogue having deuterated methylene groups (d4-Me2-etpy) were synthesized, where Me2-etpy is bis(6-methyl-2-pyridylmethyl)(2-pyridylethyl)amine. Copper(I) complexes [Cu(Me2-etpy or d4-Me2-etpy)]+ (1 and 1-d4, respectively) reacted with dioxygen at -80 degrees C in acetone to give bis(mu-oxo)dicopper(III) complexes [Cu2(O)2(Me2-etpy or d4-Me2-etpy)2](2+) (1-oxo and 1-d4-oxo, respectively), the latter of which was crystallographically characterized. Unlike a bis(mu-oxo)dicopper(III) complex with a closely related Me2-tpa ligand having a 2-pyridylmethyl pendant, 1-oxo possessing a 2-pyridylethyl pendant is not fully formed even under 1 atm of O2 at -80 degrees C and is very reactive toward the oxidation of the supporting ligand. Thermal decomposition of 1-oxo gave an N-dealkylated ligand in yield approximately 80% based on a dimer and a corresponding aldehyde. The deuterated ligand d4-Me2-etpy greatly stabilizes the bis(mu-oxo)dicopper(III) complex 1-d4-oxo, indicating that the rate determining step of the N-dealkylation is the C-H bond cleavage from the methylene group. The reversible conversion between 1-d4 and 1-d4-oxo in acetone is dependent on the temperature, and the thermodynamic parameters (DeltaH and DeltaS) of the equilibrium were determined to be -53 +/- 2 kJ mol(-1) and -187 +/- 10 J mol(-1) K(-1), respectively. The effect of the 2-pyridylethyl pendant in comparison with the 2-pyridylmethyl and 6-methyl-2-pyridylmethyl pendants on the physicochemical properties of the copper(I) and bis(mu-oxo)dicopper(III) species is discussed.     

From mononuclear to polynuclear: copper and zinc complexes obtained from polypyridylamine ligands related to tris(2-pyridylmethyl)-amine (tmpa)

Abstract

Copper(I)/(II) complexes and a zinc compound with polypyridylamine ligands (related to the tripodal ligand tris(2-pyridylmethyl)amine, tmpa) were synthesized. Crystallographic characterization was possible for most of the complexes obtained. The different structures of the complexes allowed some insight into the basic understanding of the design of coordination polymers. Depending on ligand, solvent or anion, either mononuclear, dinuclear or polynuclear complexes were obtained.     

Capped-tetrahedrally coordinated Fe(II) and Co(II) complexes using a "Click"-derived tripodal ligand: geometric and electronic structures

The 'Click'-derived tripodal ligand tris[(1-benzyl-1H-1,2,3-triazole-4-yl)methyl]amine, tbta, was used to synthesize the complexes [Fe(tbta)Cl]BF(4), 1, and [Co(tbta)Cl]BF(4), 2. Both complexes were characterized by (1)H NMR spectroscopy and elemental analysis. Single-crystal X-ray structural determination of 2 shows a 4 + 1 coordination around the cobalt(II) center with a rather long bond between Co(II) and the central amine nitrogen atom of tbta. Such a coordination geometry is best described as capped tetrahedral. 1 and 2 are thus the first examples of pseudotetrahedral coordinated Fe(II) and Co(II) complexes with tbta. A combination of SQUID susceptometry, EPR spectroscopy, M?ssbauer spectroscopy, and DFT calculations was used to elucidate the electronic structures of these complexes and determine the spin state of the metal center. Comparisons are made between the complexes presented here with related complexes of other ligands such as tris(2-pyridylmethyl)amine, tmpa, hydrotris(pyrazolyl) borate, Tp, and tris(2-(1-pyrazolyl)methyl)amine, amtp. 1 and 2 were tested as precatalysts for the homopolymerization of ethylene, and both complexes delivered distinctly different products in this reaction. Blind catalyst runs were carried out with the metal salts to prove the importance of the tripodal ligand for product formation.     

Structural comparison of copper(I) and copper(II) complexes with tris(2-pyridylmethyl)amine ligand

Copper(I) complexes with the tris(2-pyridylmethyl)amine (TPMA) ligand were synthesized and characterized to examine the effect of counteranions (Br(-), ClO(4)(-), and BPh(4)(-)), as well as auxiliary ligands (CH(3)CN, 4,4'-dipyridyl, and PPh(3)) on the molecular structures in both solid state and solution. Partial dissociation of one of the pyridyl arms in TPMA was not observed when small auxiliary ligands such as CH(3)CN or Br(-) were coordinated to copper(I), but was found to occur with larger ones such as PPh(3) or 4,4'-dipyridyl. All complexes were found to adopt a distorted tetrahedral geometry, with the exception of [Cu(I)(TPMA)][BPh(4)], which was found to be trigonal pyramidal because of stabilization via a long cuprophilic interaction with a bond length of 2.8323(12) ?. Copper(II) complexes with the general formula [Cu(II)(TPMA)X][Y] (X = Cl(-), Br(-) and Y = ClO(4)(-), BPh(4)(-)) were also synthesized to examine the effect of different counterions on the geometry of [Cu(II)(TPMA)X](+) cation, and were found to be isostructural with previously reported [Cu(II)(TPMA)X][X] (X = Cl(-) or Br(-)) complexes.     

Dioxo-bridged dinuclear manganese(III) and -(IV) complexes of pyridyl donor tripod ligands: combined effects of steric substitution and chelate ring size variations on structural,spectroscopic, and electrochemical properties

The syntheses and structural, spectral, and electrochemical characterization of the dioxo-bridged dinuclear Mn(III) complexes [LMn(mo-O)(2)MnL](ClO(4))(2), of the tripodal ligands tris(6-methyl-2-pyridylmethyl)amine (L(1)) and bis(6-methyl-2-pyridylmethyl)(2-(2-pyridyl)ethyl)amine (L(2)), and the Mn(II) complex of bis(2-(2-pyridyl)ethyl)(6-methyl-2-pyridylmethyl)amine (L(3)) are described. Addition of aqueous H(2)O(2) to methanol solutions of the Mn(II) complexes of L(1) and L(2) produced green solutions in a fast reaction from which subsequently precipitated brown solids of the dioxo-bridged dinuclear complexes 1 and 2, respectively, which have the general formula [LMn(III)(mu-O)(2)Mn(III)L](ClO(4))(2). Addition of 30% aqueous H(2)O(2) to the methanol solution of the Mn(II) complex of L(3) ([Mn(II)L(3)(CH(3)CN)(H(2)O)](ClO(4))(2) (3)) showed a very sluggish change gradually precipitating an insoluble black gummy solid, but no dioxo-bridged manganese complex is produced. By contrast, the Mn(II) complex of the ligand bis(2-(2-pyridyl)ethyl)(2-pyridylmethyl)amine (L(3a)) has been reported to react with aqueous H(2)O(2) to form the dioxo-bridged Mn(III)Mn(IV) complex. In cyclic voltammetric experiments in acetonitrile solution, complex 1 shows two reversible peaks at E(1/2) = 0.87 and 1.70 V (vs Ag/AgCl) assigned to the Mn(III)(2) <--> Mn(III)Mn(IV) and the Mn(III)Mn(IV) <--> Mn(IV)(2) processes, respectively. Complex 2 also shows two reversible peaks, one at E(1/2) = 0.78 V and a second peak at E(1/2) = 1.58 V (vs Ag/AgCl) assigned to the Mn(III)(2) <--> Mn(III)Mn(IV) and Mn(III)Mn(IV) <--> Mn(IV)(2) redox processes, respectively. These potentials are the highest so far observed for the dioxo-bridged dinuclear manganese complexes of the type of tripodal ligands used here. The bulk electrolytic oxidation of complexes 1 and 2, at a controlled anodic potential of 1.98 V (vs Ag/AgCl), produced the green Mn(IV)(2) complexes that have been spectrally characterized. The Mn(II) complex of L(3) shows a quasi reversible peak at an anodic potential of E(p,a) of 1.96 V (vs Ag/AgCl) assigned to the oxidation Mn(II) to Mn(III) complex. It is about 0.17 V higher than the E(p,a) of the Mn(II) complex of L(3a). The higher oxidation potential is attributable to the steric effect of the methyl substituent at the 6-position of the pyridyl donor of L(3).     

Copper dioxygen adducts: formation of bis(mu-oxo)dicopper(III) versus (mu-1,2)Peroxodicopper(II) complexes with small changes in one pyridyl-ligand substituent

The preference for the formation of a particular Cu 2O 2 isomer coming from (ligand)-Cu (I)/O 2 reactivity can be regulated with the steric demands of a TMPA (tris(2-pyridylmethyl)amine) derived ligand possessing 6-pyridyl substituents on one of the three donor groups of the tripodal tetradentate ligand. When this substituent is an -XHR group (X = N or C) the traditional Cu (I)/O 2 adduct forms a (mu-1,2)peroxodicopper(II) species ( A). However, when the substituent is the slightly bulkier XR 2 moiety {aryl or NR 2 (R not equal H)}, a bis(mu-oxo)dicopper(III) structure ( C) is favored. The reactivity of one of the bis(mu-oxo)dicopper(III) species, [{(6tbp)Cu (III)} 2(O (2-)) 2] (2+) ( 7-O 2 ) (6tbp = (6- (t)Bu-phenyl-2-pyridylmethyl)bis(2-pyridylmethyl)amine), was probed, and for the first time, exogenous toluene or ethylbenzene hydrocarbon oxygenation reactions were observed. Typical monooxygenase chemistry occurred: the benzaldehyde product includes an 18-O atom for toluene/ 7- (1) (8)O 2 reactivity, and a H-atom abstraction by 7-O 2 is apparent from study of its reactions with ArOH substrates, as well as the determination of k H/ k D approximately 7 in the toluene oxygenation (i.e., PhCH 3 vs PhCD 3 substrates). Proposed courses of reaction are presented, including the possible involvement of PhCH 2OO (*) and its subsequent reaction with copper(I) complex, the latter derived from dynamic solution behavior of 7-O 2 . External TMPA ligand exchange for copper in 7-O 2 and O-O bond (re)formation chemistry, along with the ability to protonate 7-O 2 and release of H 2O 2 indicate the presence of an equilibrium between [{(6tbp)Cu (III)} 2(O (2-)) 2] (2+) ( 7-O 2 ) and a (mu-1,2)peroxodicopper(II) form.     

Luminescent lanthanide complexes with stereocontrolled tris(2-pyridylmethyl)amine ligands: chirality effects on lanthanide complexation and luminescence properties

A series of tris(2-pyridylmethyl)amines including one and two asymmetric centers were synthesized in a stereo-controlled fashion as potential ligands of lanthanide cations. The reaction of chiral pyridylethyl methanesulfonates and bis(pyridylmethyl)amines occurred via an S(N)2 mechanism with complete inversion of asymmetric centers and gave the stereocontrolled tris(2-pyridylmethyl)amines, the stereochemical purity of which was ascertained by GPC, NMR, X-ray, and polarimetry experiments. They formed stable Tb(3+) and Eu(3+) complexes having 1:1, 1:2, and 1:3 stoichiometry (metal:ligand) in CH(3)CN solutions. NMR and UV titration experiments revealed that their complexation behaviors were rarely influenced by ligand chirality but significantly affected by the nature of the counteranion and the concentration ratio of metal to ligand. The Tb(3+) and Eu(3+) complexes with these tripodal ligands exhibited characteristic luminescence spectra upon excitation for pyridine chromophores (260 nm), the intensities of which were largely dependent on the ligand chirality. The meso isomer of the disubstituted tripods particularly exhibited the enhanced terbium luminescence ca. three times more than its diastereomer and un- and monosubstituted tripods. Direct excitation at the lanthanide center had similar chirality effects on the luminescence profiles, indicating that the stereochemistry of the employed ligand largely influenced the lanthanide emitting processes. Since the ligand chirality finely modified the local coordination environments around the lanthanide center, the use of stereocontrolled ligands is applicable in design of the luminescent lanthanide complexes.     

Reactivity of copper(II)-alkylperoxo complexes

Copper(II) complexes 1a and 1b, supported by tridentate ligand bpa [bis(2-pyridylmethyl)amine] and tetradentate ligand tpa [tris(2-pyridylmethyl)amine], respectively, react with cumene hydroperoxide (CmOOH) in the presence of triethylamine in CH(3)CN to provide the corresponding copper(II) cumylperoxo complexes 2a and 2b, the formation of which has been confirmed by resonance Raman and ESI-MS analyses using (18)O-labeled CmOOH. UV-vis and ESR spectra as well as DFT calculations indicate that 2a has a 5-coordinate square-pyramidal structure involving CmOO(-) at an equatorial position and one solvent molecule at an axial position at low temperature (-90 °C), whereas a 4-coordinate square-planar structure that has lost the axial solvent ligand is predominant at higher temperatures (above 0 °C). Complex 2b, on the other hand, has a typical trigonal bipyramidal structure with the tripodal tetradentate tpa ligand, where the cumylperoxo ligand occupies an axial position. Both cumylperoxo copper(II) complexes 2a and 2b are fairly stable at ambient temperature, but decompose at a higher temperature (60 °C) in CH(3)CN. Detailed product analyses and DFT studies indicate that the self-decomposition involves O-O bond homolytic cleavage of the peroxo moiety; concomitant hydrogen-atom abstraction from the solvent is partially involved. In the presence of 1,4-cyclohexadiene (CHD), the cumylperoxo complexes react smoothly at 30 °C to give benzene as one product. Detailed product analyses and DFT studies indicate that reaction with CHD involves concerted O-O bond homolytic cleavage and hydrogen-atom abstraction from the substrate, with the oxygen atom directly bonded to the copper(II) ion (proximal oxygen) involved in the C-H bond activation step.     

Syntheses,crystal structures,and luminescent properties of lanthanide complexes with tripodal ligands bearing benzimidazole and pyridine groups

Two tripodal ligands, bis(2-benzimidazolylmethyl)(2-pyridylmethyl)amine (L(1)) and bis(2-pyridylmethyl)(2-benzimidazolylmethyl)amine (L(2)), were synthesized. With the third chromophoric ligand antipyrine (Antipy), three series of lanthanide(III) complexes were prepared: [LnL(1)(Antipy)(3)](ClO(4))(3) (series A), [LnL(1)(Antipy)Cl(H(2)O)(2)]Cl(2)(H(2)O)(2) (series B), and [LnL(2)(NO(3))(3)] (series C). The nitrate salt of the free ligand H(2)L(1).(NO(3))(2) and six complexes were structurally characterized: Pr(3+)A, Y(3+)A, Eu(3+)B, Eu(3+)C, Gd(3+)C and Tb(3+)C, in which the two A and three C complexes are isomorphous. Crystallographic studies showed that tripodal ligands L(1) and L(2) exhibited a tripodal coordination mode and formed 1:1 complexes with all lanthanide metal ions. The coordination numbers of the lanthanide metal ions for the A, B, and C complexes were 7, 8, and 10, respectively. Conductivity studies on the B and C complexes in methanol showed that, in the former, the coordinated Cl(-) dissociated to give 3:1 electrolytes and, in the latter, two coordinated NO(3)(-) ions dissociated to give 2:1 electrolytes. Detailed photophysical studies have been performed on the free ligands and their Gd(III), Eu(III), and Tb(III) complexes in several solvents. The results show a wide range in the emission properties of the complexes, which could be rationalized in terms of the coordination situation, the (3)LC level of the complexes, and the subtle variations in the steric properties of the ligands. In particular the Eu(3+)A and Tb(3+)A complexes, in which the central metal ions were wholly coordinated by chromophoric ligands of one L(1) and three antipyrine molecules, had relatively higher emission quantum yields than their corresponding B and C complexes.     

Galactose oxidase models: tuning the properties of CuII-phenoxyl radicals

Four tripodal ligands with an N(3)O coordination sphere were synthesized: (2-hydroxy-3-tert-butyl-5-nitrobenzyl)bis(2-pyridylmethyl)amine (LNO(2)H), (2-hydroxy-3-tert-butyl-5- fluorobenzyl)bis(2-pyridylmethyl)amine (LFH), (2-hydroxy-3,5-di-tert-butylbenzyl)bis(2-pyridylmethyl)amine (LtBuH) and (2-hydroxy-3-tert-butyl-5-methoxybenzyl)bis(2-pyridylmethyl)amine (LOMeH). Their square-pyramidal copper(II) complexes, in which the phenol subunit occupies an axial position, were prepared and characterized by X-ray crystallography and UV/Vis and EPR spectroscopy. The phenolate moieties of the copper(II) complexes of LtBuH and LOMeH were electrochemically oxidized to phenoxyl radicals. These complexes are EPR-active (S=1), highly stable (k(decay)=0.008 min(-1) for [Cu(II)(LOMe(.))(CH(3)CN)](2+)) and stoichiometrically oxidise benzyl alcohol. Two additional tripodal ligands providing an N(2)O(2) coordination sphere were also studied: (2-pyridylmethyl)(2-hydroxy-3-tert-butyl-5-methoxybenzyl)(2-hydroxy-3-tert-butyl-5-nitrobenzyl)amine (L'OMeNO(2)H(2)) and (2-pyridylmethyl)bis(2-hydroxy-3-tert-butyl-5- methoxy)benzylamine (L'OMe(2)H(2)). Their copper(II) complexes were isolated as dimers ([Cu(2II)(L'OMe(2))(2)], [Cu(2II)(L'OMeNO(2))(2)]) that are converted to monomers on addition of pyridine. The complexes were investigated by X-ray crystallography and UV/Vis and EPR spectroscopy. Their one-electron electrochemical oxidation leads to copper(II)-phenoxyl systems that are less stable than those of the N(3)O complexes. The N(2)O(2) complexes are more reactive than the N(3)O analogues: they aerobically oxidize benzyl alcohol to benzaldehyde at a higher rate, as well as ethanol to acetaldehyde (40-80 turnovers).     

The effect of ligand charge on the coordination geometry of an Fe(III)ion: five- and six-coordinate Fe(III) complexes of tris(2-benzimidazolylmethyl)amine

By using the tripodal tetradentate ligand tris(2-benzimidazolylmethyl)amine (H(3)ntb), which can have several charge states depending on the number of secondary amine protons, mononuclear octahedral and dinuclear trigonal bipyramidal Fe(III) complexes were prepared. The reaction of mononuclear octahedral [Fe(III)(H(3)ntb)Cl(2)]ClO(4), 1, with 3 equiv of sec-butylamine in methanol led to the formation of mononuclear cis-dimethoxo octahedral Fe(III)(H(2)ntb)(OMe)(2), 2. One equivalent of the sec-butylamine was used to generate the monoanionic H(2)ntb(-) ligand where one of the three amines in the benzimidazolyl groups was deprotonated. The remaining 2 equiv were used to generate two methoxides that were coordinated to the octahedral Fe(III) ion in a cis fashion as demonstrated by the chlorides in 1. Reaction of 1 with excess (7 equiv) sec-butylamine generated the doubly deprotonated dianionic Hntb(2-) that stabilized the dinuclear mu-oxo Fe(III)(2)O(Hntb)(2), 3, adopting a five-coordinate trigonal bipyramidal geometry. The magnetic data for 3 are consistent with the antiferromagnetically coupled Fe(III) (S = 5/2) sites with the coupling constant J = -127 cm(-1).     

Thermodynamic study of Cd(II) complex formation with tripodal N-donor ligands in DMSO

The complex formation of Cd(II) with N-donor ligands in dimethylsulfoxide (DMSO) is investigated by means of potentiometry and titration calorimetry. The ligands considered in this work are tripodal polyamines and polypyridines: 2,2′,2″-triaminotriethylamine (TREN), tris(2-(methylamino)ethyl)amine (Me₃TREN), tris(2-(dimethylamino)ethyl)amine (Me₆TREN), tris[(2-pyridyl)methyl]amine (TPA) and 6,6′-bis-[bis-(2-pyridylmethyl)aminomethyl]-2,2′-bipyridine (BTPA). These ligands are characterized by a systematic modification of the donor groups to relate their structure to the thermodynamics of the complexes formed. The TREN and Me₃TREN ligands form highly stable species. The stability of the complex formed with the fully methylated Me₆TREN is much lower than with other polyamines and the enthalpic and entropic terms suggest an incomplete coordination to the metal ion. In general, the TPA ligand forms complexes less stable than TREN and Me₃TREN as a result of the combination of higher structural rigidity of TPA and lower basicity of pyridine moiety with respect to primary and secondary amines. Pyridine-containing ligands display, in general, a less unfavorable formation entropy than tripodal polyamines here considered. In particular, TPA forms a more stable 1:1 species with respect to Me₆TREN due to the entropic term, being the enthalpy less negative. The ligand BTPA is able to form only a monometallic complex, where the metal ion is likely to be encapsulated as indicated by the obtained thermodynamic parameters.     

Controlled hydrolysis of lanthanide complexes of the N-donor tripod tris(2-pyridylmethyl)amine versus bisligand complex formation

The reaction of the lanthanide salts LnI3(thf)4 and Ln(OTf)3 with tris(2-pyridylmethyl)amine (tpa) was studied in rigorously anhydrous conditions and in the presence of water. Under rigorously anhydrous conditions the successive formation of mono- and bis(tpa) complexes was observed on addition of 1 and 2 equiv of ligand, respectively. Addition of a third ligand equivalent did not yield additional complexes. The mono(tpa) complex [Ce(tpa)I3] (1) and the bis(tpa) complexes [Ln(tpa)2]X3 (X = I, Ln = La(III) (2), Ln = Ce(III) (3), Ln = Nd(III) (4), Ln = Lu(III) (5); X = OTf, Ln = Eu(III) (6)) were isolated under rigorously anhydrous conditions and their solid-state and solution structures determined. In the presence of water, 1H NMR spectroscopy and ES-MS show that the successive addition of 1-3 equiv of tpa to triflate or iodide salts of the lanthanides results in the formation of mono(tpa) aqua complexes followed by formation of protonated tpa and hydroxo complexes. The solid-state structures of the complexes [Eu(tpa)(H2O)2(OTf)3] (7), [Eu(tpa)(mu-OH)(OTf)2]2 (8), and [Ce(tpa)(mu-OH)(MeCN)(H2O)]2I4 (9) have been determined. The reaction of the bis(tpa) lanthanide complexes with stoichiometric amounts of water yields a facile synthetic route to a family of discrete dimeric hydroxide-bridged lanthanide complexes prepared in a controlled manner. The suggested mechanism for this reaction involves the displacement of one tpa ligand by two water molecules to form the mono(tpa) complex, which subsequently reacts with the noncoordinated tpa to form the dimeric hydroxo species.     

High-spin metal complexes containing a ferromagnetically coupled tris(semiquinone) ligand

The tris-bidentate ligand 1,3,5-tris(5'-tert-butyl-3',4'-dihydroxyphenyl)benzene ((TBCat)(3)Ph) was synthesized. The reaction of this molecule in basic solution with two paramagnetic acceptors, i.e., a nickel(II)minus signtetraazamacrocyclic ligand complex (Ni(CTH)) (CTH = dl-5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane) and manganese(II)-hydrotris[3-(4'-cumenyl)-5-methylpyrazolyl]borate (Mn(Tp(Cum,Me))), yielded two complexes whose analytical formulas are consistent with those of trinuclear complexes. Spectroscopic and magnetic measurements suggest that these derivatives contain divalent metal ions coordinated to the tris(semiquinone) form of the ligand. Analysis of the magnetic data shows that the pi-connectivity of the ligand enforces ferromagnetic coupling between the three semiquinone units of the molecule, giving rise to complexes with S = 9/2 (M = Ni(II)) and S = 6 (M = Mn(II)) ground states. The coupling within the tris(semiquinone) unit is quite large (J = -26 cm(-1) for the nickel(II) derivative and J = -40 cm(-1) for the manganese(II) one, using the general exchange Hamiltonian H = sigma J(ij)S(i)S(j)), and it is of the same order of magnitude as that observed in an analogous series of bis(semiquinone) complexes that we recently reported.     

Structural and Spectroscopic Characterization of a Mononuclear Hydroperoxo–Copper(II) Complex with Tripodal Pyridylamine Ligands

A model for the key intermediate in copper oxygenase reactions, the Cu(II )–OOH complex, was prepared with the novel tripodal pyridylamine ligand, bis(6-pivalamide-2-pyridylmethyl)(2-pyridylmethyl)amine. The HOO⁻ moiety is stabilized by hydrogen bonding to two amine H atoms (see structure on the right).     

Atom transfer radical addition in the presence of catalytic amounts of copper(I/II) complexes with tris(2-pyridylmethyl)amine

Highly efficient atom transfer radical addition of polyhalogenated compounds to alkenes catalyzed by copper(I/II) complexes with tris(2-pyridylmethyl)amine in the presence of a radical initiator [2,2'-azobis(2-methylpropionitrile)] was reported.     

Atom transfer radical addition (ATRA) catalyzed by copper complexes with tris[2-(dimethylamino)ethyl]amine (Me6TREN) ligand in the presence of free-radical diazo initiator AIBN

In this article, we focus on the evaluation of tris[2-(dimethylamino)ethyl]amine (Me(6)TREN) ligand in copper catalyzed ATRA in the presence of free-radical diazo initiator AIBN (2,2'-azobis(2-methylpropionitrile)). The addition of carbon tetrachloride to 1-hexene, 1-octene and cis-cyclooctene proceeded efficiently to yield 89, 85 and 85% of monoadduct, respectively, using the catalyst to alkene ratio of 1 : 2500. For alkenes that readily undergo free radical polymerization, such as methyl acrylate, catalyst loadings as high as 0.4 mol-% were required. Furthermore, modest yields of the monoadduct were obtained with less active alkyl halides (chloroform and bromoform) using 250 : 1 and 500 : 1 ratios of alkene to copper(II). Interestingly, the addition of carbon tetrachloride to cis-cyclooctene produced only 1-chloro-4-(trichloromethyl)-cyclooctene, while carbon tetrabromide yielded 1,2 and 1,4-regioisomers in 75 : 25 ratio. The activity of [Cu(II)(Me(6)TREN)X][X] (X = Br(-) and Cl(-)) complexes in ATRA in the presence of AIBN was additionally probed by adding excess free ligand, source of halide anions and triphenylphosphine. The results indicated that disproportionation is a likely cause for lower activity of Me(6)TREN as compared to TPMA (tris(2-pyridylmethyl)amine).     

Proton-coupled electron transfer in ruthenium(II)-pterin complexes: formation of ruthenium-coordinated pterin radicals and their electronic structures

Ruthenium(II)-pterin complexes were prepared using tetradentate and tripodal tris(2-pyridylmethyl)amine (TPA) and tris(5-methyl-2-pyridylmethyl)amine (5-Me3-TPA) as auxiliary ligands together with 2-(N,N-dimethyl)-6,7-dimethylpterin (Hdmdmp) and 6,7-dimethylpterin (Hdmp) as pterin derivatives for ligands. Characterization was made by spectroscopic methods, X-ray crystallography, and electrochemical measurements. The pterin ligands coordinated to the ruthenium centers as monoanionic bidentate ligands via the 4-oxygen of the pyrimidinone moiety and the 5-nitrogen of the pyrazine parts. The striking feature is that the coordinated dmp- ligand exhibits a quinonoid structure rather than a deprotonated biopterin structure, showing a short C-N bond length for the 2-amino group. Those complexes exhibit reversible two-step protonation for both pterin derivatives coordinated to the ruthenium centers to give a drastic spectral change in the UV-vis spectroscopy. Doubly protonated Ru(II)-pterin complexes were stabilized by pi-back-bonding interaction and exhibited clear and reversible proton-coupled electron transfer (PCET) to give ruthenium-coordinated neutral monohydropterin radicals as intermediates of PCET processes. Those ESR spectra indicate that the unpaired electron delocalizes onto the PCET region (N5-C6-C7-N8) of the pyrazine moiety.