Synthesis of aluminium complexes bearing a piperazine-based ligand system

Aluminium complexes bearing the N,N-chelating ligand 1,4-bis(2-hydroxy-3,5-di-tert-butyl)piperazine (1) have been synthesised. Both monometallic and bimetallic aluminium methyl complexes (2 and 3, respectively) were prepared by treatment of 1 with the appropriate amount of AlMe₃. Complex 2 can be converted to 3 by addition of excess AlMe₃. Bimetallic aluminium-ethyl complex 4 was also prepared. Treatment of 1 with AlEt₂Cl afforded the monometallic chloride complex 5. Treatment of this latter complex with potassium alkoxides (KOR, R = Me, Et, ⁱPr, ^tBu) or AgOTf afforded the corresponding aluminium alkoxide complexes (6, R = Et; 7, R = Me; 8, R = ⁱPr; 9, R = ^tBu; 10, R = OTf) in good yields. Aluminium ethoxide complex 6 was also synthesised by treatment of 1 with AlEt₂OEt. All of these complexes were tested as potential catalysts in the ring-opening polymerisation of rac-lactide and caprolactone with limited success.     

Structural optimization of cyclic sulfonamide based novel HIV-1 protease inhibitors to picomolar affinities guided by X-ray crystallographic analysis

Synthesis and HIV-1 protease inhibitory activity of compound 5 based on the structure of a novel cyclic sulfonamide pharmacophore has been recently disclosed from our group. X-ray crystallographic structure of 5 when bound to the HIV-1 protease defined its binding mode. The importance of the geometry of the substitution at C4–Me (S configuration) was emphasized. In the present paper we wish to disclose the design of novel inhibitors 47 and 48 based on the X-ray structure of compound 5 bound to the HIV-1 protease, their synthesis and activity against HIV-1 protease. By making changes at the C4 position and the carbamate linkage the above compounds 47 and 48 were found to be approximately one hundred fold more active compared to 5 and their K_i values are in the picomolar range. An unusual observation regarding the activity and geometry was made with compounds 51 and 52. X-ray results demonstrate that 48 and 52 bind to the same binding pocket with simultaneous change in the conformation of the cyclic sulfonamide ring.     

Chemical characterisation of oxidative degradation products of Δ-THC

The chemical analysis of a sample of Δ⁹-THC, which had been stored in an ethanol/propylene glycol solution for 5 years, resulted in the isolation of several hydroxylated Δ⁹-THC derivatives, the main of which were trans-cannabitriol monoethyl ether (4) and trans-propanediol ethers 7 and 8. cis-Cannabitriol monoethyl ether (5) and the oxidised derivatives 3 and 6 were detected in lesser amounts. The structure elucidation of the unprecedented cannabinoids 3, 5, 7 and 8 was achieved mainly by NMR techniques. Full NMR assignment of compounds 4 and 6 were also made. The detection of cannabitriol (6) and the corresponding solvent-adduct analogues (compounds 4-8) was in agreement with the decomposition mechanisms previously proposed for Δ⁹-THC. The isolation of the endoperoxide 3 represents indirect evidence of the existence of unstable precursors that were suspected to be intermediates in the non-enzymatic oxidation pathway of Δ⁹-THC. Both isomers of cannabitriol monoethyl ether exhibited weak affinity at either CB₁ (K_i=2.25, 6.30 μM) or CB₂ cannabinoid receptors (K_i=1.97, 3.13 μM), the trans isomer always being more potent than the cis isomer.     

An efficient microwave assisted synthesis of novel class of Rhodanine derivatives as potential HIV-1 and JSP-1 inhibitors

(Z)-5-(2-(1H-Indol-3-yl)-2-oxoethylidene)-3-phenyl-2-thioxothiazolidin-4-one (7a-q) derivatives have been synthesized by the condensation reaction of 3-phenyl-2-thioxothiazolidin-4-ones (3a-h) with suitably substituted 2-(1H-indol-3-yl)-2-oxoacetaldehyde (6a-d) under microwave condition. The thioxothiazolidine-4-ones were prepared from the corresponding aromatic amines (1a-e) and di-(carboxymethyl)-trithiocarbonyl (2). The aldehydes (6a-h) were synthesized from the corresponding acid chlorides (5a-d) using HSnBu₃.     

The stereoselective synthesis of (E)-octafluoro-1,3,5-hexatriene and (3E,5E,7E)-dodecafluoro-1,3,5,7,9-decapentaene

(E)-(1,2-Difluoro-1,2-ethenediyl)bis[tributylstannane], 3, readily undergoes a Pd(PPh₃)₄/CuI-catalyzed cross-coupling reaction with iodotrifluoroethene to yield (E)-octafluoro-1,3,5-hexatriene, 4, in high isomeric purity. (1Z,3E,5Z)-(1,2,3,4,5,6-Hexafluoro-1,3,5-hexenetriyl)bis[tributylstannane], 7, was sequentially prepared from (1Z,3E,5Z)-(1,2,3,4,5,6-hexafluoro-1,3,5-hexenetriyl)bis[triethylsilane], 5, which was prepared via a Pd(PPh₃)₄/CuI-catalyzed cross-coupling reaction of 3 with (E)-1,2-difluoro-1-iodo-2-triethylsilylethene, 6. Pd(PPh₃)₄/CuI cross-coupling of 7 with iodotrifluoroethene gave (3E,5E,7E)-dodecafluoro-1,3,5,7,9-decapentaene, 8.     

Dioxomolybdenum(VI) complexes containing N-heterocyclic carbenes

Compound MoO₂Cl₂(THF)₂ reacts with two equivalents of 1,3-dialkyl substituted 4,5-dimethylimidazol-2-ylidenes to give the dioxomolybdenum(VI) complexes MoO₂Cl₂(L^R)₂ [R = Me (1), i-Pr (2)]. Treatment of MoO₂Cl₂(THF)₂ with one equivalent of the N-heterocyclic carbenes L^Me, L^i-Pr and ^C1L^n-Bu (L^Me = 1,3,4,5-tetramethylimidazol-2-ylidene, L^i-Pr = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene, and ^C1L^n-Bu = 1,3-dibutyl-4,5-dichloroimidazol-2-ylidene) affords the monocarbene adducts MoO₂Cl₂(L^R) [R = Me (3), i-Pr (4)] and MoO₂Cl₂(^C1L^n-Bu) (5), respectively. Decomposition of complexes 1-5 affords a molybdenum oxychloride anion [Mo₂O₅Cl₄]²⁻ as an imidazolium salt.     

Regio- and stereoselective reactions of a rhodanine derivative with optically active 2-methyl- and 2-phenyloxirane

The reaction of a rhodanine derivative (=(Z)-5-benzylidene-3-phenyl-2-thioxo-1,3-thiazolidin-4-one; 1) with (S)-2-methyloxirane (2) in the presence of SiO₂ in dry CH₂Cl₂ for 10 days led to two diastereoisomeric spirocyclic 1,3-oxathiolanes 3 and 4 with the Me group at C(2) (Scheme 2). The analogous reaction of 1 with (R)-2-phenyloxirane (5) afforded also two diastereoisomeric spirocyclic 1,3-oxathiolanes 6 and 7 bearing the Ph group at C(3) (Scheme 3). The structures of 3, 4, 6, and 7 were confirmed by X-ray crystallography (Figs. 1 and 2). These results show that oxiranes react selectively with the thiocarbonyl group (CS) in 1. Furthermore, the nucleophilic attack of the thiocarbonyl S-atom at the SiO₂-activated oxirane ring proceeds with high regio- and stereoselectivity via an S_N2-type mechanism.     

Kinetics and mechanistic studies of the interaction of thiosulfate with cis-diaqua-bis[1-alkyl-2-(arylazo)imidazole]ruthenium(II) complexes

The nucleophilic substitution reaction of S₂O₃²⁻ with [Ru(HaaiR′)₂(OH₂)₂](ClO₄)₂ (1) [HaaiR′ = 1-alkyl-2-(phenylazo)imidazole] and [Ru(ClaaiR′)₂(OH₂)₂](ClO₄)₂ (2) [ClaaiR′ = 1-alkyl-2-(chlorophenylazo)imidazole] [where R′ = Me(a), Et(b) or Bz(c)] in acetonitrile–water (50% v/v) medium to yield Na₂[Ru(HaaiR′)₂(S₂O₃)₂] (3a, 3b or 3c) and Na₂[Ru(ClaaiR′)₂(S₂O₃)₂] (4a, 4b or 4c) has been studied. The products were characterized by microanalytical data and spectroscopic techniques (UV–Vis, NMR and mass spectroscopy). The reaction proceeds in two consecutive steps (A → B → C); each step follows first order kinetics with respect to each complex and S₂O₃²⁻, and the first step second order rate constant (k′₂) is greater than the second step one (k″₂). An increase in the π-acidity of the ligand increases the rate. Thermodynamic parameters, the standard enthalpy of activation (Δ^‡H⁰) and the standard entropy of activation (Δ^‡S⁰), have been calculated for both steps using the Eyring equation from variable temperature kinetic studies. The low Δ^‡H⁰ and large negative Δ^‡S⁰ values indicate an associative mode of activation for both aqua ligand substitution processes.     

A highly stereoselective preparation of CF3-substituted 1-aryl-1,2-diphenylethenes: application to the synthesis of panomifene

β-CF₃-α,β-diphenylvinyl sulfide 3a was prepared stereoselectively in 77% yield from the reaction of 2 with phenyllithium at room temperature for 5 h. Oxidation of 3a with MCPBA afforded the corresponding vinyl sulfone 4a, in which (E)-4a can be crystallized in a mixture of CH₂Cl₂ and hexane. The addition-elimination reaction of (E)-4a with phenyllithium having substituents on the benzene ring provided 5a-j in 51-82% yields stereospecifically. Similarly, the treatment of (E)-4a with p-chloroethoxyphenyllithium in the presence of 12-crown-4 (20 mol %) at −10 °C, followed by slowly warming to room temperature, resulted in the formation of the corresponding panomifene precursor 6 in 82% yield.     

Synthesis of functional Δ-1,3,5-oxazaphospholene and 2H-1,4,2-diazaphosphole complexes via catalytic ring expansion reactions of a 2H-azaphosphirene complex

Catalytically-induced ring expansion of 2H-azaphosphirene complex 1 using ferrocenium hexafluorophosphate and acetone (2), diethylketone (3), cyclohexanone (4), benzaldehyde (5) or para-hydroxy-benzaldehyde (6) furnished selectively the Δ³-1,3,5-oxazaphospholene complexes 7-11, whereas with ortho- and para-hydroxy- or ortho- and para-amino-substituted benzonitriles the 2H-1,4,2-diazaphosphole complexes 16-19 were obtained. Two further findings are noteworthy: (1) The significant decreased reaction time in the case of the sterically more demanding carbonyl derivatives 2-4 and (2) the formation of diastereomers in the case of 10 and 11 with a ratio of 8:1 and 9:1, respectively. All products were characterized by NMR, MS and elemental analysis and the configuration of complexes 7 and 10a were determined by X-ray single-crystal diffraction analysis.     

Syntheses of methylene-bridged ansa-zirconocene complexes and copolymerization studies of ethylene and norbornene

Methylene-bridged ansa-metallocene complexes bearing substituents on the cyclopentadienyl (Cp) and fluorenyl (Flu) moieties, namely methylene[9-(2,7-di-tert-butyl)fluorenyl(2-(1,3-dimethylcyclopentadienyl))]zirconium dichloride (1a) and its analogue, methylene[(9-(2,7-di-tert-butyl)fluorenyl(2-(1-methyl-3-phenyl)cyclopentadienyl))]zirconium dichloride (2a), have been prepared from (2,7-di-tert-butyl)-9-prop-2-ynyl-9H-fluorene (2). This procedure includes the use of 3-bromo-1-propyne which affords the methylene bridging unit by way of an intermolecular Pauson-Khand reaction in which norbornadiene and a pendant alkyne cyclize to form a ring that later becomes a substituted cyclopentadienyl group. Ethylene-norbornene (E-N) copolymerization was then carried out using these new complexes (1a and 1b) in the presence of methylaluminoxane (MAO) as a cocatalyst; these activities can be compared to that of isopropylene[9-fluorenyl-cyclopentadienyl]zirconium dichloride (3a). The activity of catalyst 1a was comparable to that of 3a but much higher than that of 2a. In addition, 1a shows higher norbornene insertion performance, and gives an E-N copolymer with a higher glass transition temperature (T_g) than 2a under identical conditions; both 1a and 2a give a lower T_g polymer than 3a does.     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

Reactivity of the dinuclear platina-β-diketone [Pt2{(COMe)2H}2(μ-Cl)2] towards chelating ligands - Bridge cleavage versus formation of acetyl(chloro)platinum(II) complexes

The dinuclear platina-β-diketone [Pt₂{(COMe)₂H}₂(μ-Cl)₂] (1) was found to react with 2-(ROCH₂)C₅H₄N (R =  Me, 2a; H, 2b) yielding a cationic mononuclear platina-β-diketone [Pt{(COMe)₂H}{2-(MeOCH₂)C₅H₄N}]Cl (3) and an acetyl(chloro)platinum(II) complex [Pt(COMe)Cl{2-(HOCH₂)C₅H₄N}] (4), respectively. The reaction of 1 with 8-(methylthio)quinoline (5) resulted in the formation of [Pt(COMe)Cl{8-(MeS)C₉H₆N}] (6). The identities of all complexes were established by microanalysis, ¹H, and ¹³C NMR spectroscopy. Single-crystal X-ray diffraction analysis showed 6 to be square-planar platinum(II) complex with N and C atoms as well as Cl and S atoms in mutually trans positions (configuration index: SP-4-2). In accordance with this, quantum chemical calculations on the DFT level of theory revealed a higher stability of complex 6 having a SP-4-2 configuration vs. the analogous complex in SP-4-3 configuration. The distinctly different reactivity of 1 with 2a on the one hand and with 2b and 5 on the other is discussed in terms of the HSAB concept and a deprotonation/reprotonation reaction.     

Regioselective Baeyer-Villiger lactonization of 2-substituted pyrrolidin-4-one. Synthesis of statine

Nine 2-substituted pyrrolidin-4-ones 4a-i were obtained via a series of functional group transformation of known prolinol 5 by facile six kinds of methodologies. The target structure of 1,3-amino alcohols 2a-i was constructed in the regioselective Baeyer-Villiger lactonization of ketones 4a-i and reduction of the resulting 4-substituted tetrahydro-1,3-oxazin-6-ones 3a-i. A new and straightforward synthesis of (3S,4S)-statine (6) has been established starting from trans-(2S,4R)-4-hydroxyproline (1).     

Syntheses and NMR study of [(2-dimethylaminomethyl)phenyl]vinylsilane derivatives and [(2-dimethylaminomethyl)phenyl]ethylsilane derivatives

Various vinylsilanes, SiX(CHCH₂)(CH₃)[2-(CH₃)₂NCH₂C₆H₄], and ethylsilanes, SiX(CH₂CH₃)(CH₃)[2-(CH₃)₂NCH₂C₆H₄] [X=Cl (1); OMe (2); H (3); F (4); OSiMe₃ (5); NMe₂ (6); Me (7)], were synthesized in order to investigate the electronic effect of vinyl group on silicon atom having an intramolecular coordination arm. The magnitude of Δδ (ethyl→vinyl for ²⁹Si-NMR) of chlorosilane, 1, was the biggest one among 1-7. The differences of ²⁹Si chemical shifts between vinylsilanes and ethylsilanes increased in the following order: X=Me, NMe₂<H<OSiMe₃<OMe<F<Cl.     

Synthesis and structural characterisation of rhodium hydride complexes bearing N-heterocyclic carbene ligands

Addition of excesses of N-heterocyclic carbenes (NHCs) IEt₂Me₂, IⁱPr₂Me₂ or ICy (IEt₂Me₂ = 1,3-diethyl-4,5-dimethylimidazol-2-ylidene; IⁱPr₂Me₂ = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene; ICy = 1,3-dicyclohexylimidazol-2-ylidene) to [HRh(PPh₃)₄] (1) affords an isomeric mixture of [HRh(NHC)(PPh₃)₂] (NHC = IEt₂Me₂ (cis-/trans-2), IⁱPr₂Me₂ (cis-/trans-3), ICy (cis-/trans-4) and [HRh(NHC)₂(PPh₃)] (IEt₂Me₂(cis-/trans-5), IⁱPr₂Me₂ (cis-/trans-6), ICy (cis-/trans-7)). Thermolysis of 1 with the aryl substituted NHC, 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene (IMesH₂), affords the bridging hydrido phosphido dimer, [{(PPh₃)₂Rh}₂(μ-H)(μ-PPh₂)] (8), which is also the reaction product formed in the absence of carbene. When the rhodium precursor was changed from 1 to [HRh(CO)(PPh₃)₃] (9) and treated with either IMes (=1,3-dimesitylimidazol-2-ylidene) or ICy, the bis-NHC complexes trans-[HRh(CO)(IMes)₂] (10) and trans-[HRh(CO)(ICy)₂] (11) were formed. In contrast, the reaction of 9 with IⁱPr₂Me₂ gave [HRh(CO)(IⁱPr₂Me₂)₂] (cis-/trans-12) and the unusual unsymmetrical dimer, [(PPh₃)₂Rh(μ-CO)₂Rh(IⁱPr₂Me₂)₂] (13). The complexes trans-3, 8, 10 and 13 have been structurally characterised.     

Synthesis of novel 5-amino-1-aroylpyrazoles

A series of 5-amino-1-aroylpyrazoles 3 are synthesized directly by the reaction of β-aminocrotononitrile 1 with some structures containing the hydrazine moiety (X-NHNH₂) 2 by refluxing ethanol in presence of sodium acetate. When semicarbazide 3i was used (X = CONH₂), the reaction afforded the unexpected 7-aminopyrazolo[1,5-a]pyrimidine 4.     

Synthesis and structural characterization of enantiopure exo and endo six-membered oxazoline-derived palladacycles

Direct palladation of (S)-4-benzyl-2-methyl-2-oxazoline (1) and (S)-2-benzyl-4-tert-butyl-2-oxazoline (2) using Pd(OAc)₂ in MeCN afforded the corresponding μ-acetato-dimeric complexes with six-membered exo and endo palladacycles, respectively. The same complexes were obtained by reacting coordination complexes Pd(1)₂(OAc)₂ and Pd(2)₂(OAc)₂ with Pd(OAc)₂ in MeCN. Metalation of (S)-2,4-dibenzyl-2-oxazoline (3) with Pd(OAc)₂ in AcOH, MeCN or CH₂Cl₂ resulted in the regiospecific formation of the six-membered endo palladacycle. The obtained μ-acetato-dimeric complexes were converted to the corresponding μ-chloro-dimeric derivatives 7, 11 and 13 by treatment with LiCl in acetone. The mononuclear PPh₃ adducts 8, 12 and 14 were obtained by reacting dimers 7, 11 and 13 with PPh₃ in benzene. NMR spectroscopy data supported the proposed structures of all complexes and suggested that exo and endo palladacycles in 8 and 12 have rigid boat conformations in CHCl₃. The X-ray crystal structures of the μ-acetato dimer 6 with the exo palladacycle and the PPh₃ adduct 14 with the endo metalacycle revealed boat conformation of both palladacycles and chiral twisted conformations δ(S) and λ(S), respectively, of the oxazoline rings in the solid state.