Tunable electrochemiluminescence of CdSe@ZnSe quantum dots by adjusting ZnSe shell thickness

CdSe quantum dots as cores capped with ZnSe shell (CdSe@ZnSe QDs) via a facile and eco-friendly strategy have been synthesized in aqueous solution for the first time. The electrochemiluminescence (ECL) of CdSe@ZnSe QDs was greatly enhanced compared to that of CdSe QDs. In particular, the ECL properties of the resulting CdSe@ZnSe QDs were found to be controllable by adjusting the thickness of ZnSe shells. Benefiting from the enhanced ECL intensity, the sensor based on CdSe@ZnSe QDs could accurately quantify dopamine from 10.0 nM to 3.0 μM with a detection limit of 3.6 nM.     

Spectral broadening in quantum dots-sensitized photoelectrochemical solar cells based on CdSe and Mg-doped CdSe nanocrystals

In order to absorb a broad spectrum in visible region, a co-sensitized TiO₂ electrode was prepared by CdSe and Mg-doped CdSe quantum dots (Q dots). The power conversion efficiency of the co-sensitized Q dots photoelectrochemical solar cells (PECs) showed 1.03% under air mass 1.5 condition (I = 100 mW/cm²), which is higher than that of individual Q dots-sensitized PECs. The incident-photon-to-current conversion efficiency of the co-sensitized PECs showed absorption peaks at 541 and 578 nm corresponding to the two Q dots and displayed a broad spectral response over the entire visible spectrum in the 500–600 nm wavelength domains.     

Recognition of DNA based on changes in the fluorescence intensity of CdSe/CD QDs–phenanthroline systems

The CdSe quantum dots (QDs) modified by mercapto-β-cyclodextrin (CD) were synthesized and characterized by transmission electron microscopy, powder X-ray diffraction, excitation and emission spectra, and fluorescence lifetime. When λ_ex = 370 nm, the fluorescence peak of CdSe/CD QDs is at 525 nm. Phenanthroline (Phen) is able to quench their fluorescence, which can be recovered by the addition of DNA. The quenching and restoration of fluorescence intensity were found to be linearly proportional to the amount of Phen and DNA, respectively. The variation of the fluorescence intensity of the CdSe/CD QDs–Phen system was studied, and it was demonstrated to result from a static mechanism due to the formation of a Phen inclusion complex with the CdSe QDs modified by mercapto-β-cyclodextrin. The fluorescence recovery was due to the binding of DNA with Phen in the inclusion complex, leading to the freeing of the CdSe/CD QDs. The binding constants and sizes of the binding sites of the Phen–DNA interaction were calculated to be 1.33 × 10⁷ mol^?1 L and 10.79 bp.     

Co-sensitization of vertically aligned TiO2 nanotubes with two different sizes of CdSe quantum dots for broad spectrum

In order to absorb a broad spectrum in the visible region, vertically aligned TiO₂ nanotubes (TONTs) were co-sensitized by two different sizes of CdSe quantum dots (Q dots). The power conversion efficiency of co-sensitized Q dots solar cells showed 1.20%. The co-sensitization of Q dots showed higher performance than the single size sensitization. The incident photon-to-current conversion efficiency of co-sensitized TONTs electrode showed two absorption peaks at 520 and 550 nm demonstrating the sensitization of Q dots with two different sizes. This efficiency enhanced charge harvesting efficiency over the entire visible spectrum, particularly the 500–600 nm wavelength domains.     

Anodic electrochemiluminescence of CdSe nanoparticles coreacted with tertiary amine and halide induced quenching effect

The novel anodic electrochemiluminescence (ECL) behaviors of the CdSe nanoparticles coreacted with tertiary amine were observed. The ECL intensity peak located near +1.2 V, accompanied with a shoulder above +1.5 V. The ECL emission peak estimated at about 580 nm was almost identical with that of the photoluminescence (PL), indicating the passivation of the surfaces of the nanoparticles. The dependence of the ECL on system pH and the concentration of the coreactants were also discussed. The halide ions could quench ECL, with the effective order I^? > Br^? > Cl^?. Based on these results the possible ECL processes were proposed.     

Electrochemiluminescence immunosensor based on nanocomposite film of CdS quantum dots-carbon nanotubes combined with gold nanoparticles-chitosan

A novel and sensitive electrochemiluminescence (ECL) immunosensor based on CdS quantum dots (QDs)-carbon nanotubes (CNTs) and gold nanoparticles-chitosan (GNPs-CHIT) was presented. CdS QDs ECL was much enhanced by combing poly(diallyldimethylammonium chloride) functionalized CNTs. GNPs-CHIT nanohybrids was used to construct an effective antibody immobilization matrix with excellent stability and bioactivity. The principle of ECL detection for target human IgG is based on the increment of steric hindrance after immunoreaction, which resulted in the decrease in ECL intensity. The linear response range was between 0.006 and 150 ng mL^?1, and the detection limit was 0.001 ng mL^?1. This approach offers obvious advantages of being simpler, faster, and more stable compared with other immunosensors, which possesses great potential for protein detection in clinical laboratory.     

Ag2S quantum dot-sensitized solar cells

We present a new photosensitizer – Ag₂S quantum dots (QDs) – for solar cells. The QDs were grown by the successive ionic layer adsorption and reaction deposition method. The assembled Ag₂S-QD solar cells yield a best power conversion efficiency of 1.70% and a short-circuit current of 1.54 mA/cm² under 10.8% sun. The solar cells have a maximal external quantum efficiency (EQE) of 50% at λ = 530 nm and an average EQE of ～ 42% over the spectral range of 400–1000 nm. The effective photovoltaic range covers the visible and near-infrared spectral regions and is ～ 2–4 times broader than that of the cadmium chalcogenide systems — CdS and CdSe. The results show that Ag₂S QDs can be used as a highly efficient and broadband sensitizer for solar cells.     

An aptamer-based biosensor for sensitive thrombin detection

A sensitive aptamer-based sandwich-type sensor is presented to detect human thrombin using quantum dots as electrochemical label. CdSe quantum dots were labeled to the secondary aptamer, which were determined by the square wave stripping voltammetric analysis after dissolution with nitric acid. The aptasensor has a lower detection limit at 1 pM, while the sample consumption is reduced to 5 μl. The proposed approach shows high selectivity and minimizes the nonspecific adsorption, so that it was used for the detection of target protein in the human serum sample. Such an aptamer-based biosensor provides a promising strategy for screening biomarkers at ultratrace levels in the complex matrices.     

柠檬酸盐稳定的水溶性CdSe量子点的合成及表征

以柠檬酸三钠为稳定剂在水溶液中合成了水溶性CdSe量子点,用X射线粉末衍射、透射电镜、紫外-可见吸收光谱和荧光发射光谱对CdSe量子点的结构、形貌及其荧光性质进行了表征.结果表明合成的CdSe量子点为立方闪锌矿结构,呈球形,分散性良好,平均尺寸约为2.6nm,具有窄且对称的荧光发射光谱,半峰宽为45nm.     

Photooxidation of phenol in aqueous nanodispersion of humic acid

Photooxidation of phenol sensitized by Aldrich humic acid (AHA) has been studied in an aqueous solution at neutral and basic pH. Solutions containing phenol and AHA of various concentrations were irradiated with monochromatic light at 253.7 nm or with polychromatic light within the wavelength range of 310–420 nm. The quantum yields of phenol photodegradation under these conditions were determined. At the wavelength of 253.7 nm direct degradation of phenol was much more effective than that sensitized by AHA. With polychromatic light the photooxidation was found to be strongly dependent on pH of aqueous solution and independent on AHA concentration.     

The performance of coupled (CdS:CdSe) quantum dot-sensitized TiO2 nanofibrous solar cells

Highly porous networks and reduced grain boundaries with one-dimensional (1-D) nanofibrous morphology offer enhanced charge transport in solar cells applications. Quantum dot (QDs) decorated TiO₂ nanofibrous electrodes, unlike organic dye sensitizers, can yield multiple carrier generations due to the quantum confinement effect. This paper describes the first attempt to combine these two novel approaches, in which CdS (～18 nm) and CdSe (～8 nm) QDs are sensitized onto electrospun TiO₂ nanofibrous (diameter ～80–100 nm) electrodes. The photovoltaic performances of single (CdS and CdSe) and coupled (CdS/CdSe) QDs-sensitized TiO₂ fibrous electrodes are demonstrated in sandwich-type solar cells using polysulfide electrolyte. The observed difficulties in charge injection and lesser spectral coverage of single QDs-sensitizers are solved by coupling (CdS:CdSe) two QDs-sensitizers, resulting in a enhanced open-circuit voltage (0.64 V) with 2.69% efficiency. These results suggest the versatility of fibrous electrodes in QDs-sensitized solar cell applications.     

Chemical bath deposition of CdS quantum dots on vertically aligned ZnO nanorods for quantum dots-sensitized solar cells

Formation of CdS quantum dots (Q dots) on the vertically aligned ZnO nanorods electrode was carried out by chemical bath deposition. The diameter and thickness of ZnO nanorods are ～100–150 nm and ～1.6 μm, respectively, and CdS Q dots on ZnO nanorods have a diameter of smaller than 15 nm. In application of the Q dots-sensitized solar cells, composite film exhibited a power conversion efficiency of 0.54% under air mass 1.5 condition (80 mW/cm²), and incident-photon-to-current conversion efficiency showed 18.6%.     

The investigation of the interactions between CdSe quantum dots and human serum albumin by resonance Rayleigh scattering and second-order scattering spectra

Human serum albumin (HSA) was the most abundant protein in human plasma and has significant physiological function. In Tris–HCl buffer solution (pH 7.4), water-soluble semiconductor CdSe quantum dots (QDs) reacted with HSA and the products resulted in a great enhancement of the intensity of resonance Rayleigh scattering (RRS) and second-order scattering (SOS). Based on this, a new method was developed to investigate the interactions between QDs and HSA. The parameters with regard to determination were optimized, and the reaction mechanism was discussed. Under optimal conditions, the increments of scattering intensity (ΔI) were directly proportional to the concentrations of HSA in the range of 0.4–48.0 μmol L^?1. The detection limits were 0.10 μmol L^?1 for RRS method and 0.25 μmol L^?1 for SOS method. The proposed method was sensitive, simple and rapid. It has been successfully applied to the determination of HSA in human urine samples. Analytical results obtained with this novel assay were satisfactory.     

Electrochemical detection of quantum dots by stabilization of electrogenerated copper species

The determination of quantum dots is of particular interest as they are frequently used as labels in electrochemical biosensors. In this paper, we describe a method for the detection of very low concentrations of quantum dots using the voltammetric response of copper in ammonia solution. Copper species electrogenerated on the electrode surface are stabilized by the nanoparticles, preventing their oxidation by dissolved oxygen, and a relationship between the concentration of the nanoparticles and the copper voltammetric response can thus be obtained. The reported method shows a linear range between 0.05 and 2 nM of quantum dots, with a limit of detection in the order of 9 × 10⁷ nanoparticles. This method could be employed to improve the detection limit of electrochemical biosensors using quantum dots as labels.     

Intercalation of melamine into layered zirconium phosphates and their adsorption properties of formaldehyde in gas and solution phase

The intercalations of melamine into α- and γ-zirconium phosphates (α- and γ-ZrP) were investigated. Melamine-intercalated α-ZrP afforded two phases with different interlayer distances (d = 1.30 and 1.55 nm). The phase with d = 1.30 nm was obtained as the mixture with original α-ZrP at 30 min reaction by batch method, whereas the single phase with d = 1.55 nm was obtained by decantation method in saturated melamine aqueous solution. Contrary to this, for γ-ZrP a phase with d = 1.78 nm was obtained by both batch and decantation methods in saturated melamine aqueous solution. And new phase with d = 1.48 nm was formed in batch method at low pH or lower concentration of melamine aqueous solution. In these phases the arrangement of melamine changed from a monolayer structure to a bilayer structure with the increase of interlayer distance. Furthermore, melamine-intercalated α- and γ-ZrP adsorbed formaldehyde gas and formaldehyde in formalin solution by interacting with melamine molecule in the interlayer region. In melamine-intercalated γ-ZrP with d = 1.48 nm, the expansion of interlayer distance to around 1.6 nm was observed after the adsorption of formaldehyde gas and formaldehyde in formalin solution. The adsorption of formaldehyde in formalin solution was accompanied with the release of melamine in the interlayer region with increasing the concentration of formaldehyde at 65 °C.     

TiO2/Nafion film based electrochemiluminescence for detection of dissolved oxygen

TiO₂ nanocrystals had been modified on the surface of the glassy carbon electrode (GCE) with the help of Nafion. The electrochemiluminescence (ECL) behavior of the TiO₂/Nafion GCE in aqueous solution was investigated. A possible mechanism about the ECL of TiO₂ had also been proposed. The ECL intensity was linear with the dissolved oxygen concentration in the range of 0.30–10.00 mg/L with a detection limit of 0.12 mg/L. The developed method can be applied to detect the dissolved oxygen concentration or biochemical oxygen demand (BOD).     

LiMn2O4 hollow nanosphere electrode material with excellent cycling reversibility and rate capability

Lithium-rich Li_1.05Mn₂O₄ hollow nanospheres have been successfully prepared by air-calcining lithiated MnO₂ precursor at a low temperature of 550 °C, which was synthesized by chemical lithiation of hollow MnO₂ nanospheres with LiI at 70 °C for 12 h. The lithium-rich Li_1.05Mn₂O₄ hollow nanospheres exhibit an excellent cycling stability and rate capability as a cathode material for rechargeable lithium batteries: it maintains 90% of its initial capacity after 500 cycles, and keeps 70% of the reversible capacity at 0.1 C rat, even at 15 C rate.     

Synthesis of gold nanorods using concentrated aerosol OT in hexane and its application as catalyst for the reduction of eosin

The microemulsion method for the preparation of nanoparticles is well known. We have used the aqueous core of highly concentrated aerosol OT in hexane solution to synthesize gold nanorod by utilizing the aqueous core of surfactant aggregates as host nanoreactor. The shape and size of the aqueous core as well as the particles formed inside the core can be controlled by changing the parameter W₀ (water to surfactant ratio), concentration of gold salt and the concentration of surfactant. When the concentration of the surfactant is very high the shape of the aqueous droplet does not remain spherical but take the shape of prolate. In our study we have made gold nanorods by the reduction of gold chloride with sodium borohydride in the aqueous core of 1 M AOT hexane at a W₀ of 10. The rods are highly monodispersed with a diameter of about 20 nm and a length of 200 nm with an aspect ratio of 10. The absorption spectra of the gold nanorods show two different peaks one at 535 nm and the other at 965 nm. The particles were used as a catalyst for the reduction of eosin with sodium borohydride. The rate constant comes out be very large in comparison with that of uncatalysed reaction. The reaction was carried out at various temperatures between 20 and 60 °C and the activation energy of the reaction was calculated using Arrhenius plot between–ln k and 1/T. The activation energy of the gold nanorods catalysed reaction comes out to be more than two times as compared to uncatalysed reaction.     

Highly efficient electrogenerated chemiluminescence of natural chlorophyll a

Highly efficient electrogenerated chemiluminescence (ECL) of natural chlorophyll a (Chl a) was observed in acetonitrile with 1-butyl-3-methylimidazolium hexafluorophosphate as electrolyte and tri-n-propylamine (TPrA) as a coreactant. The collected ECL spectrum displayed a maximum emission peak at ca. 670 nm, suggesting that the same excited states with the photo-excitation processes were generated. The possible ECL reaction mechanism of this Chl a–TPrA system was discussed and established. ECL intensity of Chl a was proportional to its concentration over the range of 0.1–11 μM, and a high ECL efficiency (Φ_ecl) of 0.86 was calculated using Ru(bpy)₃^2 + as the standard (Φ_ecl = 1). Herein, an important property of natural Chl a was expanded and a new kind of ECL luminophores was developed. Moreover, it is expected that this high ECL efficiency of natural porphyrin complex has great potential to expand its ECL sensing application.     

Size-controllable synthesis of spherical ZnO nanoparticles: Size- and concentration-dependent resonant light scattering

A new and simple direct precipitation method assisted with ultrasonic agitation was proposed for the preparation of spherical ZnO nanoparticles. The size of the ZnO nanoparticles, 10 nm to 85 nm, was tuned through controlling the calcination temperature and changing the ratio of the reactants. The resonant light scattering (RLS) of the ZnO nanoparticles dispersed/suspended in aqueous solution of Triton X-100 was studied under room temperature. It was found that the ZnO nanoparticles of different size or concentration all have a characteristic RLS peak at 387 nm. Under optimal conditions, the RLS intensity was proportional to the ZnO concentration in the range of 7.3 × 10^?8–1 × 10^?4 mol L^?1, while the cubic root of the RLS intensity was found to be proportional to the size of ZnO nanoparticles. Further, the quantitative relationship of the size of the ZnO nanoparticles versus the calcination temperature was derived, and this could be used to forecast/control the nano-size in the nano-ZnO preparation.