Regularization for improving the deconvolution in real-time near-field acoustic holography

Near-field acoustic holography is a measuring process for locating and characterizing stationary sound sources from measurements made by a microphone array in the near-field of the acoustic source plane. A technique called real-time near-field acoustic holography (RT-NAH) has been introduced to extend this method in the case of nonstationary sources. This technique is based on a formulation which describes the propagation of time-dependent sound pressure signals on a forward plane using a convolution product with an impulse response in the time-wavenumber domain. Thus the backward propagation of the pressure field is obtained by deconvolution. Taking the evanescent waves into account in RT-NAH improves the spatial resolution of the solution but makes the deconvolution problem "ill-posed" and often yields inappropriate solutions. The purpose of this paper is to focus on solving this deconvolution problem. Two deconvolution methods are compared: one uses a singular value decomposition and a standard Tikhonov regularization and the other one is based on optimum Wiener filtering. A simulation involving monopoles driven by nonstationary signals demonstrates, by means of objective indicators, the accuracy of the time-dependent reconstructed sound field. The results highlight the advantage of using regularization and particularly in the presence of measurement noise.     

Sound field separation with a double layer velocity transducer array (L)

In near-field acoustic holography sound field separation techniques make it possible to distinguish between sound coming from the two sides of the array. This is useful in cases where the sources are not confined to only one side of the array, e.g., in the presence of additional sources or reflections from the other side. This paper examines a separation technique based on measurement of the particle velocity in two closely spaced parallel planes. The purpose of the technique is to recover the particle velocity radiated by a source in the presence of disturbing sound from the opposite side of the array. The technique has been examined and compared with direct velocity based reconstruction, as well as with a technique based on the measurement of the sound pressure and particle velocity. The double layer velocity method circumvents some of the drawbacks of the pressure-velocity based reconstruction, and it can successfully recover the normal velocity radiated by the source, even in the presence of strong disturbing sound.     

单层传声器阵列重建相干声场的近场声全息方法研究

针对传声器阵列两侧存在相干声源的非自由声场重建问题,提出基于球面谐波函数扩展近场声全息理论的相干声场重建方法。该方法在已知测量面两侧声源几何位置时,使用单层传声器阵列获取测量面处的声压分布,通过最小二乘法获得与目标声源和干扰噪声源响应对应的最优球波函数扩展项数和最优系数向量,结合测点位置的空间坐标进行声波分解,并分别重建出各声源在测量面上的声压分布。为了验证方法的有效性,分别给出了相干噪声源为球形声源和非球形声源的仿真验证,并在全消声室内对双扬声器产生的相干声场的重建进行了实验验证。结果表明:该方法对球形声源和非球形声源干扰下的声场重建都具有较好的效果,球形声源干扰下的重建精度更高。      

Underwater hybrid near-field acoustical holography based on the measurement of vector hydrophone array

Hybrid near-field acoustical holography(NAH) is developed for reconstructing acoustic radiation from a cylindrical source in a complex underwater environment. In hybrid NAH,we combine statistically optimized near-field acoustical holography(SONAH) and broadband acoustical holography from intensity measurements(BAHIM) to reconstruct the underwater cylindrical source field. First,the BAHIM is utilized to regenerate as much acoustic pressures on the hologram surface as necessary,and then the acoustic pressures are taken as input to the formulation implemented numerically by SONAH. The main advantages of this technology are that the complex pressure on the hologram surface can be reconstructed without reference signal,and the measurement array can be smaller than the source,thus the practicability and efficiency of this technology are greatly enhanced. Numerical examples of a cylindrical source are demonstrated. Test results show that hybrid NAH can yield a more accurate reconstruction than conventional NAH. Then,an experiment has been carried out with a vector hydrophone array. The experimental results show the advantage of hybrid NAH in the reconstruction of an acoustic field and the feasibility of using a vector hydrophone array in an underwater NAH measurement,as well as the identification and localization of noise sources.     

循环平稳声场的声源定位研究

旋转机械产生的辐射声场具有循环平稳特性,传统的平面近场声全息技术无法准确反映其调制特性,往往在边频带上出现虚假的能量的分布.采用循环谱密度取代功率谱密度作为重建物理量,则可准确提取循环平稳声场的调制和载波信息.考虑到循环谱密度的计算量以及特征提取的准确性,提出了循环谱密度组合切片分析法,并分析了加性白噪声对重建的影响.仿真分析及实验结果表明,此方法有较强的噪声抑制能力,全息重建的结果可准确反映声源的位置.     

基于支持向量回归的patch近场声全息研究

为了解决patch近场声全息中全息数据外推问题,提出一种基于支持向量回归的一步式patch近场声全息技术。该方法首先把初始全息面上的数据当成训练样本进行学习,构造出回归函数,然后利用回归函数实现全息数据外推,最后基于统计最优近场声全息进行重建。数值仿真和实验研究的结果表明:在各个分析频率下,该方法都可以实现小孔径全息面的近场外推。从近场声全息重建结果看,即使初始全息数据受到噪声干扰,该方法也是一种有效的patch近场声全息技术。      

内部体积源作用下的圆柱壳内外声场特性

圆柱壳内各型体积源辐射噪声特性研究是声场建模和声场预报的前提.为了研究具有指向性的大尺度体积源特性对水下航行器结构内外声场的影响,本文结合薄壳理论、等效源和柱腔Green函数构造了体积源激励下的壳体振动耦合方程,研究了体积源表面声散射作用和指向性强弱对圆柱壳内外声场的影响.数值计算结果表明,体积源构造的准确性与其等效源位置有关,等效源配置在体积源几何中心与其结构表面之间0.4—0.6时,可以提高声场计算结果的准确性;大尺度体积源表面的声散射作用会导致壳体内部声场结构发生改变,内声场声腔共振峰发生偏移,并且在部分频段引起较强的声透射现象;此外,体积源指向性变化对壳体内外声场强弱影响较小,其显著作用表现在改变了外辐射声场的远场指向性.该研究结果对噪声预报和控制有一定的参考价值.     

Source characterization of a subsonic jet by using near-field acoustical holography

In the present study, patch near-field acoustical holography was used in conjunction with a multireference, cross-spectral sound pressure measurement to visualize the sound field emitted by a subsonic jet and to predict its farfield radiation pattern. A strategy for microphone array design is described that accounts for the low spatial coherence of aeroacoustic sources and for microphone self-noise resulting from entrained flow near the jet. In the experiments, a 0.8-cm-diameter burner was used to produce a subsonic, turbulent jet with a Mach number of 0.26. Six fixed, linear arrays holding eight reference microphones apiece were disposed circumferentially around the jet, and a circular array holding sixteen, equally spaced field microphones was traversed along the jet axis to measure the sound field on a 30-cm-diameter cylindrical surface enclosing the jet. The results revealed that the jet could be modeled as a combination of eleven uncorrelated dipole-, quadrupole-, and octupole-like sources, and the contribution of each source type to the total radiated sound power could be identified. Both the total sound field reconstructed in a three-dimensional space and the farfield radiation directivity obtained by using the latter model were successfully validated by comparisons to directly measured results.     

An equivalent source method for recovering and reconstructing the target sound field in a non-free field

In a non-free field,the existence of disturbing sources would destroy the free-field condition required by near-field acoustic holography,and confuse the identification of target source due to the scattering effect caused by disturbing sound falling on the target source.To totally remove the influence of disturbing source,a method for recovering and reconstructing the target sound field in a non-free field was proposed based on the equivalent source method and the pressure-velocity measurement.In the proposed method,the sound field separation technique was firstly used to separate the mixed sound field into the outgoing field coming from the target source and the incoming field coming from the disturbing source.Then the scattered component contained in the outgoing field was calculated by using the disturbing sound and the surface impedance of the target source.Finally,the sound field radiated by the target source in a free field was obtained by subtracting the scattered component from the outgoing field and was further used to reconstruct the sound field of the target source.The proposed method was numerically and experimentally testified and the results of both the simulation and the experiment demonstrated the validity of the proposed method.     

基于时域多普勒修正的运动声全息识别方法

由于运动声源测量信号中多普勒效应的存在,一般声全息方法无法直接使用,而阵列信号波束成形处理方法无法进行定量分析.本方法建立了基于测量面、辐射面和全息面的运动学几何关系,提出了声源与测量信号之间的非线性时间映射方法,基于运动声源的声源特征函数,构造了消除多普勒效应的全息面时域声压分布.全息重建得到运动声源表面有效声压分布,实现了对主要声源处声压幅值的定量估计.实际运动声源的测量实验结果证明了该方法的有效性.     

非均匀海洋环境噪声中的匹配场处理舰船辐射噪声级估计方法

在实际舰船辐射噪声测量过程中,受非均匀海洋环境噪声的影响,导致常规测量方法的性能急剧下降,基于此,提出了一种非均匀海洋环境噪声背景中的垂直阵舰船辐射噪声测量方法。根据水声信道传播理论,建立了由海面多个空时独立均匀分布噪声源构成的非均匀背景噪声场模型,推导了非均匀海洋环境噪声场中垂直阵舰船辐射噪声估计的理论公式。针对典型的浅海水声信道,进行计算机仿真实验,分析了该方法的测量性能并与常规匹配场测量方法进行对比,结果表明:(1)该方法能有效克服非均匀海洋环境噪声对测量结果的影响,测量误差较小;(2)相同测量条件下,该方法测量性能优于常规匹配场舰船辐射噪声级测量方法;(3)当信噪比满足一定要求时,测量得到的声源级与实际声源级相比,误差小于1 dB。      

Statistically optimized near field acoustic holography using an array of pressure-velocity probes

Statistically optimized near field acoustic holography (SONAH) differs from conventional near field acoustic holography (NAH) by avoiding spatial Fourier transforms; the processing is done directly in the spatial domain. The main advantage of SONAH compared with NAH is that the usual requirement of a measurement aperture that extends well beyond the source can be relaxed. Both NAH and SONAH are based on the assumption that all sources are on one side of the measurement plane whereas the other side is source free. An extension of the SONAH procedure based on measurement with a double layer array of pressure microphones has been suggested. The double layer technique makes it possible to distinguish between sources on the two sides of the array and thus suppress the influence of extraneous noise coming from the "wrong" side. It has also recently been demonstrated that there are significant advantages in NAH based on an array of acoustic particle velocity transducers (in a single layer) compared with NAH based on an array of pressure microphones. This investigation combines the two ideas and examines SONAH based on an array of pressure-velocity intensity probes through computer simulations as well as experimentally.     

单层传声器阵列信号空间重采样的声波分离方法

为了重构非自由声场中目标声源的声场响应,提出单层传声器阵列信号空间重采样的声波分离方法.以球面波函数为基函数,建立由系列球面波函数叠加表达的声场数学模型.基于近场声全息原理,利用单层传声器阵列面上空间重采样形成的两组声压测量信号,求解基函数系数,并重构出传声器阵列两侧声源各自的声场响应,实现声波分离.使用脉动球和振动球共同作用的非自由声场,检验了数学模型以及传声器信号信噪比、传声器阵列形状和面积、声源中心位置、频率等关键参数对声波分离精度的影响,并在全消声室内进行了实验验证.最后,对单层传声器阵列重采样的声波分离方法的实施给出了建议.     

Numerical simulation of acoustic holography with propagator adaptation: Application to a 3D disc

Acoustical holography can be used to identify the vibration velocity of an extended vibrating body. Such an inverse problem relies on the radiated acoustic pressure measured by a microphone array and on an a priori knowledge of the way the body radiates sound. Any perturbation on the radiation model leads to a perturbation on the velocity identified by the inversion process. Thus, to obtain the source vibration velocity with a good precision, it is useful to identify also an appropriate propagation model. Here, this identification, or adaptation, procedure rests on a geometrical interpretation of the acoustic holography in the objective space (here the radiated pressure space equipped with the L²-norm) and on a genetic algorithm.The propagator adaptation adds information to the holographic process, so it is not a regularisation method, which approximates the inverse of the model but does not affect the model. Moreover regularisations act in the variables space, here the velocities space. It is shown that an adapted model significantly decreases the quantity of regularisation needed to obtain a good reconstructed velocity, and that model adaptation improves significantly the acoustical holography results.In the presence of perturbations on the radiated pressure, some indications will be given on the interest or not to adapt the model, again thanks to the geometrical interpretation of holography in the objective space.As a numerical example, a disc whose vibration velocity on one of its sides is identified by acoustic holography is presented. On an industrial scale, this problem occurs due to the noise radiated by car wheels. The assessment of the holographic results has not yet been rigorously performed in such situations due to the complexity of the wheel environment made up of the car body, road and rolling conditions.     

利用拖船辐射噪声的深海声学参数近场匹配场反演方法

针对深海声学参数难以通过远距离合作声源反演获取的问题,提出了利用拖船低频噪声近场匹配场反演方法。首先,利用聚焦波束形成计算拖曳阵接收拖船噪声的方向性,获得传播路径特征;然后,构建多参数反演模型,由波数积分声传播模型计算拷贝场,采用遗传算法对多频匹配场目标函数进行反演。同时,采用蒙特卡罗方法分析参数后验概率密度。仿真与试验结果表明:深海环境中拖曳阵接收拖船噪声主要来自海底反射路径,利用该特性反演得到海水深度、噪声源距离、阵列深度、沉积层厚度等参数,多频联合反演可以提高沉积层厚度等参数反演准确性。宽带匹配场处理表明,利用反演最优参数模型能准确给出拖船噪声源的空间位置。      

基于声全息方法和双目视觉实现运动声源声场可视化

运动声源声场的可视化是一种重要的运动声源定位的技术手段,利用双目视觉测量技术实现运动声源声场空间的自动测量,自动确定运动声源表面的空间位置,针对声源表面,利用传声器阵列,基于声全息方法实现运动声源声场的重建,建立视频图像与声场的空间映射,并建立视频与声场之间的时序,实现实景视频图像与声场重建结果的融合,可以自动生成声源运动过程的视频。基于该方法所开发了一套试验测量系统,对运动声源的测量试验结果表明,该方法可以有效实现运动声源的视频可视化,使人可以直接从视频中看到声源及其变化过程,使声源的定位和识别变得更加简单。      

Video visualization for moving sound sources based on binoculars stereo and acoustic holography

The video visualization methods for moving sound sources are very important. The spatial positions in the sound filed measurement of moving sources arc measured by an automated method based on the binoculars stereo technique,the spatial coordinates of the surface of the moving sound source are determined automatically.The sound field of the surface of the moving source is reconstructed with a microphone array using the acoustic holography method for moving sound sources.The spatial mapping between the sound field and the video images is constructed,and also the time sequence of the sound field and the images is founded. Then,the reconstructed sound field and the real-world images are merged,and the visualized sound field video of the moving source is generated automatically.A sound field measurement system based on this method is developed,the measurement results of the moving sound source with this system indicate that the sound field video visualization is realized effectively with the proposed method,the sound sources and their changing process can be seen directly from the generated video,the identification and localization for the moving sound sources can be easier with this method.     

基于统计最优和波叠加的联合局部近场声全息

提出了一种基于统计最优近场声全息和波叠加法的联合局部近场声全息技术。首先利用两次统计最优近场声全息的声源定位结果来指导配置等效源,其后利用波叠加法进行局部声场重构。该技术适合于中低频声场的局部重建,计算快速,重建精度高;可以在测量数据有缺失的情况下重建声场。进行了脉动球声源模型的数值仿真,并在半消声室内对电机噪声源进行了实验,仿真实验都准确地重构了声源所辐射的外部声场。该技术可以重建任意类球形声源辐射的声场。      

一种矢量水听器基阵模拟器的设计

矢量水听器的每个阵元同时测量声场中声矢量和质点振速的3个分量,相对于声压水听器阵来说,矢量阵获取声场中更多的信息。利用矢量阵所获得速度场的信息可以去除目标方位估计中的 180°模糊。模拟器可以模拟实际海洋环境中目标的辐射特性和噪声特性,应用模拟器可以有效地缩短声纳的研制周期。本文提出一种矢量水听器基阵模拟器的设计方案,该方案解决了矢量阵中宽带信号的90°移相问题、时延精确控制问题和宽带噪声的谱状控制问题。