Strahlungschemie von Kohlenwasserstoffen. 17. Mitteilung. Hexan-NO

The influence of NO on the radiolysis of hexane at ?70°C has been studied. The results allow the following interpretations: The bimolecular part of the hydrogen production is in contrary to N₂O efficiently quenched by NO. This part involves non-thermal hydrogen atoms and has a G-value of about 1.4. All olefins are suppressed, probably in a secondary chain reaction with NO. The radical yield is drastically reduced by very low concentrations of NO, but by higher concentrations this decrease is slowed down. A reaction scheme proposed by BURRELL is able to explain these results.     

Cover Picture: Angew. Chem. Int. Ed. 6/2002

The cover picture shows the electric eel, Electrophorus electricus, a source for commercially available acetylcholinesterase. In an experiment described by K. B. Sharpless and M. G. Finn and co‐workers on pp. 1053–1057, a femtomolar inhibitor was assembled by the enzyme from a collection of building blocks containing azide and alkyne functional groups, shown floating in solution. The templated 1,3‐dipolar cycloaddition reaction, producing the inhibitor, is represented by the flare of light at the center of the image.     

Cover Picture: Angew. Chem. Int. Ed. 13/2002

The cover picture shows benzoborirene, the product of the crossed‐molecular‐beam reaction between benzene molecules and boron atoms, displayed above the three‐dimensional plot of the angular‐ and translational‐energy‐dependent flux of the benzoborirene molecules in the center‐of‐mass system. As the reaction conditions preclude secondary collisions, the intermediate initially formed from the reactive collision decays by ejection of a hydrogen atom. The structure of the benzoborirene depicted is based on a DFT computation, which, combined with results of highly accurate coupled‐cluster calculations has been used to assign the reaction product by comparing experimental and theoretical reaction energies. Details are described by R. I. Kaiser and H. F. Bettinger on p. 2350 ff.     

An E.P.R. study of peptides after U.V. irradiation

Abstract— Various peptides of Gly, Ala, Phe, Tyr, and Trp have been irradiated with U.V. light in the solid state or in frozen aqueous solution. The radicals produced were studied by E.P.R. spectroscopy at low temperature and at room temperature. Radicals seem to occur preferentially on Gly or Ala when in the C-terminal position and there is evidence for a photosensitization of these amino acids by aromatic amino acids.     

Aromatic annelation. I. Synthesis of pyridines.

The preparation of substituted pyridines from cycloalkanones by elaboration of an aromatic ring is described.     

Comment on "Adsorption of naphthalene on zeolite from aqueous solution" by C.F. Chang, C.Y. Chang, K.H. Chen, W.T. Tsai, J.L. Shie, Y.H. Chen

A paper contributes not only by its originality and creativity, but also by its continuity and development toward subsequent research. Referencing and quotation accuracy are an important part of a scientific article. This study presents a literature review concerning the precision of 50 first authors' publications, which originally cited Ho's pseudo-second-order kinetic expression paper in kinetics model for solute sorption on various sorbents. This model applies to a range of solid-liquid systems such as metal ions, dyestuffs, herbicides, oil, and organic substances in aqueous systems onto various sorbents. In addition, citations of Lagergren and Elovich rate equations are also discussed. This comment offers information for citing the original idea of Ho's pseudo-second-order kinetic expression and Lagergren's pseudo-first-order kinetic equation. It is also suggested that the cited paper should be accurately quoted.     

60th Birthday of Prof. Dr. Dr. h.c. Heino Finkelmann

This section contains news of the macromolecular community all over the world. Articles about, for example, people, projects, and market trends are welcome. Suggestions should be sent to the editorial office of the Macromolecular journals, preferably by E‐mail to macromol@wiley‐vch.de. The editorial office decides which articles will be published.     

Phospha-S-triazines. VI. Polymeric systems

Two types of polymeric phospha-s-triazines were synthesized: poly(perfluoroalkylethermonophospha-s-triazines) and monocyclic mono- and diphospha-s-triazines substituted on the carbon ring atoms by poly- (perfluoroalkylether) chains. The polymeric system consisting of the monophospha-s-triazine rings joined by perfluoroalkylether chains were found to have lower thermal oxidative stability than that shown by the corresponding dumbbell compounds. The monocyclic materials substituted by poly(perfluoroalkylether) chains possessed good thermal and oxidative stability, in addition to exhibiting anticorrosive and antioxidative properties.     

The tube electrode and e.s.r.

The convective diffusion equation for the downstream distribution of products and intermediates produced on a tube electrode under conditions of laminar flow is solved. For distances which are large compared to the thickness of the electrode, an analytical solution in real space can be found. The solution of the equation has been applied to an apparatus in which the intermediates and products are detected by e.s.r. The species are transported by laminar flow from the electrode through an e.s.r. cavity. Results are presented for two systems and are found to be in good agreement with the theory.     

Picrylamino-substituted heterocycles. II. Furazans

This paper describes the synthesis of the various picrylamino- and nitro-substituted furazans and bifurazanyls. Except for 3,4-bis(picrylamino)furazan, which was obtained by nitrating 3,4-dianilinofurazan, the picrylaminofurazans were prepared by condensing the appropriate amino-furazan with picryl fluoride in the presence of triethylamine. The various aminofurazans were oxidized with peroxytrifluoroacetic acid to the corresponding nitro derivatives.     

Temperature drop turbidity. IV. Polystyrene

The molecular weight distribution of fractionated and unfractionated polystyrene samples has been determined by temperature drop turbidimetry, in which polymer is precipitated from dilute solutions in cyclohexanol by progressively cooling from 388 to 310 K. Estimates of the molecular weight averages and the polydispersities, obtained by calibration of the temperature of initial onset of precipitation, T_i, and the weight-average molecular weight were low, but could be substantially improved by correcting for concentration changes during precipitation. An empirical procedure correlating the breadth of turbidity-temperature curves to the logarithm of the polydispersity, as measured by gel permeation chromatography, appeared to be a simpler method of characterizing the polymer samples and as accurate as the computational methods above.     

Photoreduction de benzophenones par les lactames etudiee par p.a.n.i.c.

CIDNP signais are observed during the photoreaction of p,p$\text{-}\text{?}$dichlorobenzophenone with lactams and amides in C₆D₆. The reaction intermediates are the radical pairs resulting from hydrogen abstraction α to nitrogen by the triplet p,p$\text{-}\text{?}$dichlorobenzophenone. They lead to the adducts between lactam and ketone. Attempts to trap radicals by CCl₄ prove that a part of the recombination proceeds in the solvant cage. Polarization of the ketone can only be explained by considering this product as an escape product.     

P-N compounds. 30. Phosphaminimides. 5. N-phosphinylimino-1,2,5,6-tetrahydropyridines

N-[ (Diethoxyphosphinyl)imino] and N-[ (diphenylphosphinyl)imino]-5-methyl-1,2,5,6-tetrahydropyridines were prepared by sodium borohydride reduction of the corresponding pyridinium and 3-methyl pyridinium inner salts. The carbonyl analog of this latter precusor was resynthesized and its structure completely verified.     

Aromatic Annelation. II. Synthesis of phenols.

The preparation of substituted phenols from cycloalkanones by elaboration of an aromatic ring is described.     

A new aromatic glucoside from stem bark of Illicium difengpi K.I.B. et K.I.M.

A new aromatic glucoside, namely 4-methoxyphenyl-(6-deoxy-α-L-mannopyranosyl)-β-D-glucopyranoside (1), together with six known aromatic glucosides (2–7) were isolated from the stem bark of Illicium difengpi. The structures of these compounds were established by spectroscopic methods. The isolated aromatic glucosides were tested for anti-inflammatory activity. Compounds 1, 3 and 6 showed significant inhibitory effect on nuclear factor kappa B (NF-κB) in RAW 264.7 macrophages induced by lipopolysaccharide.     

Crystal structures of synthetic analgetics. IV. Dextropropoxyphene.

The molecular and cystal structure of dextropropoxyphene has been determined by X-ray methods. The crystals are monoclinic, space group P21, with unit cell dimensions a=9.257(2) A; b=9.048(3) A; c=12.074(7) A; beta=93.01(4)degrees. The phase problem was solved by direct methods and the model refined to an R-value of 0.038 for 1799 observed reflections. E.s.d's are, in average, 0.004 A and O.3 degrees in interatomic distances and angles, respectively. The propylamine chain in nearly fully extended, the dihedral angel C4-C5-C7-N being -174.2 degrees. The conformation of this side chain is similar to that in the hydrochloride of the title compound. Thus the proposed bioactive conformation is not preferred by propoxyphene in the crystalline state, as was the case for the free base of methadone.     

Haloaldehyde polymers. IX. Polybromodichloroacetaldehyde

Bromodichloroacetaldehyde was synthesized by two methods. The first synthesis started from chloral, which was allowed to react with Ph₃P and the resultant compound brominated and hydrolyzed to give bromodichloroacetaldehyde in an overall yield of 60%. Purification by repeated distillation from P₂O₅ gave polymerization grade bromodichloroacetabldehyde. Bromodichloroacetaldehyde could also be synthesized by bromination of dichloroacetaldehyde diethyl acetal. The yields of this synthesis were only 20–30%, and the aldehyde could not be purified readily to give polymerization grade monomer. Bromodichloroacetaldehyde could be homopolymerized at ?30°C with anionic and also some cationic initiators to a polymer which was insoluble and did not melt but degraded to monomer above 200°C. The ceiling temperature of the polymerization was ?15°C in 1M solution. Bromodichloroacetaldehyde could also be copolymerized with isocyanates, primarily aryl isocyanates, and also with chloral.     

Carborane polymers. IV. Polysiloxanes

Carboranes attached to silicon through straight-chain alkyl groups were prepared and characterized for thermal stability by TGA and molecular weight change on heating. The monomers for these polymers were prepared generally by platinum-catalyzed addition of a silylhydride to an alkenyl or dialkenyl carborane. Polymerization was effected by hydrolysis-condensation of chlorosilanes, ring opening of cyclosiloxanes, and condensation of alkoxy and chlorosilanes. Two types of polymer structures were prepared, one contained m-carborane in the chain backbone, the other contained o-carborane as pendant alkylcarborane groups. Both types were obtained as elastomers; however, higher proportions of carborane in the polymers reduced elasticity and finally resulted in nonelastomers. TGA of the backbone carborane siloxane polymer indicated degradation at 370°C. in nitrogen and at 235°C. in air. Chain scission, as determined by molecular weight decrease, was observed on heating in nitrogen at 350°C. TGA of the pendant carborane siloxane polymer indicated that degradation in nitrogen and in air occurred at greater than 400°C. However, chain scission, as determined by molecular weight decrease, was observed upon heating at 300°C. in nitrogen.     

Electrostatic Accumulation Furnace for Electrothermal Atomic Spectrometry (E. A. F. E. A. S.)

Abstract

A new technique is described for rapid elemental analysis of atmospheric particulates. The basic principle is direct deposition of atmospheric particulate matter in a furnace for electrothermal atomization and analysis by atomic absorption spectrometry. A prototype instrument has been tested by analyzing the lead content in the laboratory atmosphere.     

Metrological traceability chain for PCBs: I.N.Ri.M. activity

Metrology in chemistry has its own features, which distinguish it from classical metrology: due to the lack of primary methods applicable in routine measurements, metrological traceability of measurement results can be achieved by using in a proper way suitable certified reference materials (CRMs), which can assure a direct relation to a reference. This article deals with the activity of the Italian National Institute of Metrological Research (Istituto Nazionale di Ricerca Metrologica—I.N.Ri.M.) on the analysis of various polychlorinated biphenyls congeners in organic solution by means of gas-chromatography coupled with mass spectrometry. The metrological traceability approach in the quantification step is pursued via calibration solutions prepared by gravimetrically diluting a CRM. The uncertainty for the calibration solutions was evaluated taking into account all the relevant contributions.