15N-, 1H-, and 13C-NMR chemical shifts and electronic properties of aromatic diamines and dianhydrides

We measured the ¹⁵N-, ¹H-, and ¹³C-NMR chemical shifts for a series of aromatic diamines and aromatic tetracarboxylic dianhydrides dissolved in DMSO-d₆, and discuss the relationships between these chemical shifts and the rate constants of acylation (k) as well as such electronic-property-related parameters such as ionization potential (IP), electronic affinity (EA), and the energy ε of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO). The ¹⁵N chemical shifts of the amino group of diamines (δ_N) depend monotonically on the logarithm of k (log k) and on IP. We inferred the reactivities of diamines whose acylation rates have not been measured from their δ_N, and we propose an arrangement of diamines in the order of their reactivity. The ¹H chemical shift of amino hydrogens (δ_H) and the ¹³C chemical shift of carbons bonded to nitrogen (δ_C) are roughly proportional to δ_N, but these shifts are not as closely correlated with log k and IP. Although the ¹³C chemical shifts of the carbonyl carbon of dianhydrides (δ_C,) varies much less than the δ_C and δ_N of diamines, δ_C, can be an index of acylation reactivity for dianhydrides because it is closely correlated with ε_LUMO. These facts indicate that the chemical shifts of diamines and dianhydrides are displaced according to their electron-donor and electron-acceptor properties, and that these chemical shifts can be used as indices of the electronic properties of monomers. Changes in reactivity caused by the introduction of trifluoromethyl groups into diamines and dianhydrides are inferred from the displacements of δ_N and δ_C © 1992 John Wiley & Sons, Inc.     

Some aspect of the doubly-charged ion chemistry of armoatic amines and diamines

Doubly-charged ion mass spectra of aromatic amines and diamines, as opposed to those of the aromatic hydrocarbons, show strong correlation with empirical formula.[M]⁺⁺is usually the base peak in the spectrum and its main fragmentation involves loss of C₂H₂, in sharp contrast wit the [M]⁺˙ ion which always loses HCN. Measurement of the Kinetic energy released in chargeseparation reactions can yield useful structural information. Result strongly support the concept of charge-localization on nitrogen atoms. Extensive scrambiling prior to nfragmentatiom was observed in all isomeric compoounds studied.     

Hydrogen‐bonded assemblies in the molecular crystals of 2,2′‐thiodiacetic acid with ethylenediamine and o‐phenylenediamine

Carboxylate molecular crystals have been of interest due to the presence of hydrogen bonding, which plays a significant role in chemical and crystal engineering, as well as in supramolecular chemistry. Acid–base adducts possess hydrogen bonds which increase the thermal and mechanical stability of the crystal. 2,2′‐Thiodiacetic acid (Tda) is a versatile ligand that has been widely explored, employing its multidendate and chelating coordination abilities with many metals; however, charge‐transfer complexes of thiodiacetic acid have not been reported. Two salts, namely ethylenediaminium 2,2′‐thiodiacetate, C₂H₁₀N₂²⁺·C₄H₄O₄S₂²⁻, denoted Tdaen, and 2‐aminoanilinium 2‐(carboxymethylsulfanyl)acetate, C₆H₉N₂⁺·C₄H₅O₄S⁻, denoted Tdaophen, were synthesized and characterized by IR, ¹H and ¹³C NMR spectroscopies, and single‐crystal X‐ray diffraction. In these salts, Tda reacts with the aliphatic (ethylenediamine) and aromatic (o‐phenylenediamine) diamines, and deprotonates them to form anions with different valencies and different supramolecular networks. In Tdaen, the divalent Tda²⁻ anions form one‐dimensional linear supramolecular chains and these are extended into a three‐dimensional sandwich‐type supramolecular network by interaction with the ethylenediaminium cations. However, in Tdaophen, the monovalent Tda⁻ anions form one‐dimensional zigzag supramolecular chains, which are extended into a three‐dimensional supramolecular network by interaction with the 2‐aminoanilinium cations. Thus, both three‐dimensional structures display different ring motifs. The structures of these diamines, which are influenced by hydrogen‐bonded assemblies in the molecular crystals, are discussed in detail.     

Preparation of phosphorus-containing polymers. XXV. Polyamide-imides that contain phenoxaphosphine rings

New phenoxaphosphine-containing polyamide-imides were prepared by cyclodehydration of the polyamide-amic acids obtained from 8-chloroformyl-10-phenylphenoxaphosphine-2,3-dicarboxylic anhydride 10-oxide and diamines by a low-temperature solution polycondensation. Polymers with reduced viscosities of 0.10–0.59 dl/g in DMA or concentrated H₂SO₄ at 30°C were obtained in 64–97% yields. All the polyamide-imides were soluble in m-cresol, concentrated H₂SO₄, and dichloroacetic acid and some of them were soluble in DMF, DMA, and DMSO; the polyamide-imides had better solubility in organic solvents than phenoxaphosphine-containing polyimides. The phenoxaphosphine-containing polyamide-imides derived from aromatic diamines exhibited excellent thermal properties and little degradation below about 400°C, whereas the polymers from aliphatic diamines began to lose weight at about 250°C. They appeared to have thermal stability between phenoxaphosphine-containing polyimides and polyamides. These polyamide-imides exhibited self-extinguishing behavior.     

Exchange reactions of alkyl residues in the presence of orthophosphoric and benzenephosphonic monoesters

Experimental data obtained from the study of the behaviour of monoalkyl phosphates ROP(O)(OH)O^? or monoalkyl phosphonates C₆H₅P(O)(OR)O^? in aquo-alcoholic (H₂O + R′OH) solutions suggest: (1) in the case of monoalkyl phosphonates the exchange of R and R′ must proceed by a direct alcoholysis; (2) in the case of monoalkyl phosphates, where the scission of the ester at about pH 4,5 proceeds via the intermediate formation of metaphosphate ion PO₃^?, R′OPO₃H^? can also be formed by the addition of R′OH to PO₃^? (competitive to the addition of water) besides direct alcoholysis of ROPO₃H^?.     

Dimethylglyoximkomplexe des Kobalts(III) mit aromatischen Diaminen Über α-Dioximkomplexe der Übergangsmetalle, 37. Mitt.

Zusammenfassung Durch Oxydation von Kobalt(II)salz-Lösungen in Anwesenheit von Dimethylglyoxim und aromatischen Diaminen wurden unter doppelter Umsetzung 41 Salze der [Co(HD)₂(o-Phenylendiamin)₂]⁺, [Co(HD)₂(m-Phenylendiamin₂])⁺, [Co(HD)₂-(2-Methyl-p-phenylendiamin)₂]⁺ und [Co(HD)₂(N-Dimethyl-p-phenylendiamin)₂]⁺-Kationen erhalten. Die Koordination von zwei Diaminliganden im Kobalt(III)-bis-dimethylglyoximin-Kern bestätigt dietrans-Konfiguration der [Co(HD)₂(Diamin)₂]⁺-Komplexe. Diese Annahme wurde auch durch UR-spektroskopische Untersuchung bestätigt.

---

On-dioxime complexes of transition metals, XXXVII. Cobalt(III)-dimethylglyoxime complexes with aromatic diamines

The oxidation of cobalt(II) salts in presence of dimethyl-glyoxime and aromatic diamines, has been studied. A series of 41 novel complex salts of the cations [Co(HD)₂(o-phenylendiamine)₂]⁺, [Co(HD)₂(m-phenylendiamine)₂]⁺, [Co(HD)₂(2-methyl-p-phenylendiamine)₂]⁺ and [Co(HD)₂(N-dimethyl-p-phenylendiamine)₂]⁺ has been prepared and characterized by means of double decomposition reactions.The coordination of 2 diamine molecules to the Co(III)-dimethylglyoximine-skelet confirms thetrans-configuration of the [Co(HD)₂(diamine)₂ ⁺ complexes.

---

---

Mit 2 Abbildungen     

Thermodynamic activation parameters for viscous flow of dilute aqueous solutions of ethylenediamine,trimethylenediamine and N,N-dimethyltrimethylenediamine

The density and the viscosity data have been used to determine the thermodynamic activation parameters, free energies (ΔG ^?), enthalpies (ΔH ^?) and entropies (ΔS ^?), for viscous flow of the systems; water (W) + ethylenediamine (ED), W + trimethylenediamine (TMD) and W + N,N-dimethyltrimethylenediamine (DMTMD) in the temperature range of 303.15–323.15 K over the composition range of 0 ≤ X ₂ ≤ 0.45, where X ₂ is the mole fraction of diamines. On addition of diamines to water, ΔG ^?, ΔH ^? and ΔS ^? values increase sharply, pass through a maximum and then decline. The heights of maximum in the ΔG ^? versus X ₂ curve vary as, W + DMTMD > W + TMD > W + ED. For all systems, the excess properties, ΔG ^{? E} , ΔH ^{? E} and ΔS ^{? E} are positive. The observed increase in thermodynamic values may be due to combined effect of hydrophobic hydration of diamines and water–diamine interaction as a result of hydrophilic effect.     

Synthesis and characterization of poly benzoylpropionamides

Linear polyamides having viscosities in the range of 0.12–0.41 dl/g have been prepared from bisbenzoyl propionic acids and aromatic diamines by low temperature solution polycondensation in 80–85% yield. Their solubility characteristics were studied in various solvents e.g. DMF, DMAC, HMPT, H₂SO₄. These polyamides are amorphous in nature; their densities range from 1.2 to 1.8 g/cm³. Their thermal properties were examined by TGA and DTA. The two stage decomposition phenomenon observed in TGA is in agreement with the DTA results. The integral procedural decomposition temperatures were calculated and found to exceed 250 in almost all cases.     

Effets electroniques en stereochimie—III : Réduction asymétrique de phénylalkylcétones diversement substituées par des organomagnésiens aromatiques chiraux

The asymmetric reduction of phenylalkylketones p-X-C₆H₄COR (X = H, R = C₂H₅, ¹C₃H₇, ¹C₄H₉ and R = C₂H₅, X = CH₃, OCH₃, Cl, CF₃) with chiral aromatic Grignard reagents p-YC₆H₄-CH(C₂H₅) CH₂MgCl (Y = H, OCH₃, CF₃) give optically active phenylalkylcarbinols. The absolute configuration and the enantiomeric excess depends on electronic effects of substituents carried by the organomagnesium reagent and/or ketone.     

Interplay Between Planar and Spherical Aromaticity: Shielding Cone Behavior in Dual Planar-Planar,Planar-Spherical and Spherical-Spherical Aromatics

The shielding cone concept is one of the most characteristic aspects of planar aromatic species. Herein, we explored how two neighbor aromatic moieties behave as dual planar-planar, planar-spherical, and spherical-spherical species given by biphenyl, [PhCB₁₁H₁₁]⁻, and [CB₁₁H₁₁]₂²⁻, respectively. Our results show two separate aromatic regimes given by Clar's sextet and spherical aromatic states, with independent shielding cones sharing shielding regions of moderate strength, which can be extended for networks involving multiple independent aromatic states.     

Fluorinated Mono and Spirocyclic Δ5[sgrave]5P and Δ5[sgrave]6P Derivatives of (HO)3−nHnPO (n= 0−3)

Abstract

The properties of PF₅, HPF₄, H₂PF₃, and H₃PF₂ (Δ⁵[sgrave]⁵P derivatives of (HO)₃PO, (HO)₂HPO, (HO)H₂PO, and of the hypothetic H₃PO) and the formation of the related Δ⁵[sgrave]⁶P anions PF₆ ^–, HPF₅ ^–, and trans-H₂PF₄ ^– have been studied some years ago ^1–4. The mono and spirocyclic dioxa and tetraoxa analogues, 1 and 2 available from the corresponding precursor phosphoranes by fluoride addition could be found also as products in the reaction of phosphite 3⁵ and K⁺(CF₃)₂CFO^– together with two other phosphates, 4 and 5. A ¹⁹F–¹⁹F homocorrelated 2 D NMR spectrum of 2 indicated coupling of the P–F fluorine nuclei with two CF₃ groups by a non bond mechanism.     

Substitution of Secondary Benzylic Phosphates with Diarylmethyl Anions

Substitution of diethyl and diphenyl benzylic phosphates, Alk-CH(Ar¹)OP(O)(OR)₂ (R = Et, Ph; Alk = Me, Et, i-Pr; Ar¹ = aryl), with the anions derived from Ar²CH₂ (Ph₂CH₂,9H-xanthene and fluorene) and n-BuLi at –15 °C was studied. For phosphates with Me as an Alk, diethyl phosphates produced Me-CH(Ar¹)CH(Ar²)₂ (Ar¹ = 4-halo-, 4-CN, 4-Me-, 2-Me, 2-Br-, 3-MeO-phenyl and 2-naphthyl). However, an unwanted substitution at the Et group competed with phosphates of Alk = Et- and i-Pr. Fortunately, the corresponding diphenyl phosphates cleanly underwent the desired substitution. Two enantioenriched phosphates, MeCH(Ph)OP(O)(OEt)₂ and EtCH(Ph)OP(O)(OPh)₂, proceeded with complete inversion of the stereochemistry.     

The thiolate anion as a nucleophile Part III. Reactions with various fluorobenzenes

The reactions of the fluorobenzenes, C₆F₅H, o-C₆H₂F₄, m-C₆H₂F₄, p-C₆H₂F₄, 1,3,5-C₆F₃H₃, 1,2,4-C₆F₃H₃, o-C₆F₂H₄, m-C₆F₂H₄, p-C₆F₂H₄ and C₆F₅H with thiolate anion nucleophiles RS^? (primarily MeS^?), have been studied in ethylene glycol/pyridine mixtures as a solvent. Multiple replacement of fluorine atoms was observed in the more highly fluorinated compounds, but in all cases two aromatic fluorine atoms were not replaced. Difluorobenzene and fluorobenzene did not react. The product orientations have been deduced from their NMR spectra. The mass spectra of the isomeric products C₆F₂H₃(SMe), C₆F₃H₂(SMe) and C₆F₂H₂(SMe)₂ have been examined.     

Crystallization of molybdenum and lithium double phosphates

We have synthesized a series of lithium-containing double phosphates of molybdenum: α′-, α-, γ-, β′-, β-Li₃MO₂(PO₄)₃, LiMo₂(PO₄)₃, LiMoP₂O₇. Using spectroscopic methods, we have established the local environment of Mo³⁺, Mo⁴⁺. We have determined the conductivity of the synthesized double phosphates. A characteristic features of the structure of double phosphates of molybdenum is a significant lowering of the symmetry of the MO₆ octahedron, which affects both the spectroscopic characteristics and the conductivity. We have studied the composition-structure-property relationship for molybdenum-containing representatives of the series {M₂P₃O₁₂}³⁻ and {MP₂O₇}¹⁻. The presence of highly polarized, distorted MoO₆ octahedra in the structure of LiMoP₂O₇ is the reason for the high electrical conductivity of the material. Kiev Taras Shevchenko University, 64 Vladimirskaya ul., Kiev 252033, Ukraine. Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 35, No. 6, pp. 362–366, November–December, 1999.     

Synthesis and fluorescent properties of 2‐(1H‐benzimidazol‐2‐yl)‐phenol derivatives

A high yield one pot synthesis of 2‐(2‐hydroxyaryl)‐1H‐benzirrndazole derivatives by 2‐hydroxy aromatic aldehydes with aromatic 1,2‐diamines in the presence of manganese(III) acetate at room temperature was developed. Nine fluorescencers 2‐(2‐hydroxyaryl)‐1H‐benzirrndazoles with substituent(s) X (X = H, CH₃, CH₃O, Cl) and two fluorescencers 2‐(2‐hydroxyaryl)‐1H‐naphth[2,3‐d]imidazoles with substituent of H or Cl were prepared in 38–87% yield and the ultraviolet absorption and fluorescent spectra of the eleven compounds synthesized were measured in methanol. The fluorescent characteristics of the 2‐(2‐hydroxyaryl)benzimidazole derivatives prepared were investigated on the basis of excited‐state intramolecular proton transfer mechanism, Stokes' shift, quantum yield, and the relationship between fluorescent intensity and the substituents were derived.     

Preparation of phosphorus-containing polymers-xxi: Synthesis of phosphorus-containing polymaleimide-amines

The reaction of dichloromalcimides with aromatic amines was applied to the preparation of phosphorus-containing polymers, so-called polymaleimide-amines. The phosphorus-containing polymalcimide-amines were synthesized from N,N′-bisdichloromaleimido-3,3′-diphenylalkylphosphine oxides and aromatic diamines or piperazine. Some properties of the resulting polymers, such as solubility and thermal behaviour, were investigated. Most of the polymers were obtained at yields of 80% or above. The reduced viscosities of the polymers, measured at a concentration of 0.2 g/dl in DMA at 30, were 0.13–0.27 dl/g. Some of the polymers, especially those prepared from piperazine, were freely soluble in DMF, DMA, DMSO, cone H₂SO₄, formic acid etc., but all the polymers seemed to decompose in cone H₂SO₄ or formic acid. The phosphorus-containing polymaleimide-amines had poor thermal stability and little flame retardance.     

N-(2-氧乙酸-3-甲氧基)苄叉二胺合锌(Ⅱ)配合物的合成、晶体结构及光学性质研究

本文通过修饰邻香草醛芳环上羟基的方法,得到两种Schiff碱配体:N,N′-二(2-氧乙酸-3-甲氧基)苄叉乙二胺(H2L1)和N,N′-二(2-氧乙酸-3-甲氧基)苄叉1,3-丙二胺(H2L2),利用水热合成方法以新合成的配体为基点设计合成了2个新的六配位Schiff碱锌(Ⅱ)配合物[Zn(L1)]·7H2O(1)和[Zn(L2)]·7H2O(2),通过元素分析、红外光谱和核磁共振光谱等测试手段对配合物进行了表征,并用X射线单晶衍射测得Zn(Ⅱ)配合物的晶体结构。X射线晶体学研究表明两种配合物晶体结构中都包含多个溶剂水分子,配合物1是以Zn(Ⅱ)为中心扭曲的三方棱柱构型,配合物2是以Zn(Ⅱ)为中心扭曲的八面体构型。初步研究了两种配合物的固体发光性,结果表明这两种配合物具有良好的光致发光的性能,有望在光学材料方面得到应用。     

Aromatic polyamides. V. A general synthesis of polyamides from aromatic diacids and aromatic diamines in sulfur trioxide

The reaction of terephthalic acid (TA) and para-phenylenediamine sulfate (PPD-S) in sulfur trioxide to form anisotropic, sulfonated poly(p-phenyleneterephthalamide) (SPT) dopes was reported in Part IV of this series. We have found now that the TA/PPD-S polymerization is only one example of a more general polyamide condensation reaction of aromatic diamines and aromatic diacids. Sulfonation of the aromatic diamine ring during TA/PPD-S polymerization in SO₃ was a major side reaction. Sulfonation was reduced or eliminated by aromatic diamine ring substitution with unreactive substituents, particularly chlorine and fluorine. Polymerization of 2,3,5,6-tetrafluoro-phenylenediamine with TA in SO₃ at 80°C (18% concentration) produced unsulfonated poly(tetrafluoro-para-phenyleneterephthalamide) (F-PPT) with an inherent viscosity of 2.2. The halogenated, all-para aromatic polymers formed highly anisotropic (liquid crystalline) dopes. Monomers that formed polymers in which the chain bond angle deviated from 180° (e.g., meta-oriented monomers) yielded only isotropic polymer solutions. The mechanism and rate of diamine–diacid reactivity in SO₃ was related to diamine basicity. Whereas the less basic aromatic diamines (as sulfates) polymerized with aromatic diacids in SO₃, the more basic aliphatic diamines (as sulfates) would not. Aliphatic, cycloaliphatic, and aryl-aliphatic diacids were degraded by or reacted with the solvent (SO₃). Thermogravimetric analyses of F-PPT and monosulfonated poly(chloro-para-phenyleneterephthalamide) at 20°C/min showed weight loss only above 380 and 370°C, respectively.     

N-(2-氧乙酸-3-甲氧基)苄叉二胺合锌(Ⅱ)配合物的合成、晶体结构及光学性质研究

本文通过修饰邻香草醛芳环上羟基的方法,得到两种Schiff碱配体:N,N'-二(2-氧乙酸-3-甲氧基)苄叉乙二胺(H₂L¹)和N,N′-二(2-氧乙酸-3-甲氧基)苄叉1,3-丙二胺(H₂L₂),利用水热合成方法以新合成的配体为基点设计合成了2个新的六配位Schiff碱锌(Ⅱ)配合物[Zn(L¹)]·7H₂O(1)和[Zn(L²)]·7H₂O(2),通过元素分析、红外光谱和核磁共振光谱等测试手段对配合物进行了表征,并用X射线单晶衍射测得Zn(Ⅱ)配合物的晶体结构。X射线晶体学研究表明两种配合物晶体结构中都包含多个溶剂水分子,配合物1是以Zn(Ⅱ)为中心扭曲的三方棱柱构型,配合物2构型是以Zn(Ⅱ)为中心扭曲的八面体构型。初步研究了两种配合物的固体发光性,结果表明这两种配合物具有良好的光致发光的性能,有望在光学材料方面得到应用。     

Substituent Effects on Oxidation‐Induced Formation of Quinone Methides from Arylboronic Ester Precursors

A series of arylboronic esters containing different aromatic substituents and various benzylic leaving groups (Br or N⁺Me₃Br^?) have been synthesized. The substituent effects on their reactivity with H₂O₂ and formation of quinone methide (QM) have been investigated. NMR spectroscopy and ethyl vinyl ether (EVE) trapping experiments were used to determine the reaction mechanism and QM formation, respectively. QMs were not generated during oxidative cleavage of the boronic esters but by subsequent transformation of the phenol products under physiological conditions. The oxidative deboronation is facilitated by electron‐withdrawing substituents, such as aromatic F, NO₂, or benzylic N⁺Me₃Br^?, whereas electron‐donating substituents or a better leaving group favor QM generation. Compounds containing an aromatic CH₃ or OMe group, or a good leaving group (Br), efficiently generate QMs under physiological conditions. Finally, a quantitative relationship between the structure and activity has been established for the arylboronic esters by using a Hammett plot. The reactivity of the arylboronic acids/esters and the inhibition or facilitation of QM formation can now be predictably adjusted. This adjustment is important as some applications may benefit and others may be limited by QM generation.