An efficient enantioselective synthesis of an indane acetic acid derivative: methyl (2S)-2-[(1S)-5-hydroxy-2,3-dihydro-1H-inden-1-yl]butanoate

We have developed a practical enantioselective synthesis of 1, a novel indane acetic acid derivative with two contiguous stereogenic centers. The key indene acetic acid framework was constructed via a robust, unprecedented Reformatsky process. One stereogenic center was set via a resolution, and the other via a highly diastereoselective hydrogenation of the indene acetic acid.     

Catalyst and ring size effects on periselectivity of oxonium ylide rearrangements

Diazoketones were subjected to carbene-transfer with Rh(II) or Cu(II) catalysts to probe the selectivity for rearrangement via five- or six-membered oxonium ylides. 4,5-Bis(benzyloxy) and 4-allyloxy-5-benzyloxy substrates 3a,b showed a large preference for rearrangement via the five-membered ylide under all conditions. However, a sharp divergence was seen with 5-allyloxy-4-benzyloxy substrate 3c, which underwent predominantly a [2,3]-shift to pyran 5c via the six-membered ylide with Cu(II) catalysis and a [1,2]-shift to furan 4c via the five-membered ylide with Rh(II) catalysis.     

Synthesis of tert-butyl peresters from aldehydes by Bu4NI-catalyzed metal-free oxidation and its combination with the Kharasch-Sosnovsky reaction

A new tert-butyl peresters synthesis directly from aldehydes and TBHP was developed via Bu(4)NI-catalyzed aldehyde C-H oxidation. Mechanistic studies suggest that the protocol proceeds via a radical process. Combining the method with the Kharasch-Sosnovsky reaction offers a practical approach for the synthesis of allylic esters from simple aldehydes and alkenes via a two-step one-pot procedure.     

Quasiclassical trajectory study of fast H-atom collisions with acetylene

Translationally hot H collisions with the acetylene are investigated using quasiclassical trajectory calculations, on a recent full-dimensional ab initio-based potential energy surface. Three outcomes are focused on: non-reactive energy transfer via prompt collisions, non-reactive energy transfer via the formation of the vinyl complex, and reactive chemical H-atom exchange, also via complex formation. The details of these outcomes are presented and correlated with the collision lifetime. Large energy transfer is found via complex formation, which can subsequently decay back to reactants, a non-reactive event, or to new products, a reactive event. For the present system, these two events are experimentally indistinguishable.     

Lithium diisopropylamide-mediated reactions of imines, unsaturated esters, epoxides, and aryl carbamates: influence of hexamethylphosphoramide and ethereal cosolvents on reaction mechanisms

Several reactions mediated by lithium diisopropylamide (LDA) with added hexamethylphosphoramide (HMPA) are described. The N-isopropylimine of cyclohexanone lithiates via an ensemble of monomer-based pathways. Conjugate addition of LDA/HMPA to an unsaturated ester proceeds via di- and tetra-HMPA-solvated dimers. Deprotonation of norbornene epoxide by LDA/HMPA proceeds via an intermediate metalated epoxide as a mixed dimer with LDA. Ortholithiation of an aryl carbamate proceeds via a mono-HMPA-solvated monomer-based pathway. Dependencies on THF and other ethereal cosolvents suggest that secondary-shell solvation effects are important in some instances. The origins of the inordinate mechanistic complexity are discussed.     

A comparative study of the pyrolytic and electron impact-induced fragmentations of 4-phenylbutanoic acid and some analogues

By use of deuterium labelling it is shown that the mechanisms of fragmentation of the title compounds upon Curie-point pyrolysis and electron impact are essentially different. For example, the pyrolytic expulsion of water from 4-phenylbutanoic acid is a 1,2 eliminations, whereas upon electron impact water is expelled via a 1,4 elimination; the generation of styrene from this acid proceeds via a concerted mechanism upon pyrolysis, but via a stepwise mechanism upon electron impact.     

Pd-catalyzed direct arylation of tautomerizable heterocycles with aryl boronic acids via C-OH bond activation using phosphonium salts

The first direct arylation via C-OH bond activation of tautomerizable heterocycles has been achieved using phosphonium salts, on the basis of a combination of the phosphonium coupling and Suzuki-Miyaura cross-coupling conditions. Optimal reaction condition is obtained through screening of phosphonium salts, Pd catalysts, and bases. The direct arylation via C-OH bond activation tolerates a variety of tautomerizable heterocycles and aryl boronic acids. The mechanism of the Pd-catalyzed phosphonium coupling is proposed to proceed via a domino seven-step process including the unprecedented heterocycle-Pd(II)-phosphonium species. Application of the Pd-catalyzed direct arylation via C-OH bond activation using PyBroP leads to the most efficient synthesis of the biologically important 6-arylpurine ribonucleoside in a single step from unactivated and unprotected inosine.     

Three different dimerizations of 2-bromo-3-methyl-1,4-naphthoquinones

Three types of dimeric naphthoquinones, which possess structurally diverse skeletons, can be prepared in one step from 2-bromo-3-methyl-1,4-naphthoquinones. 2,2'-Dimeric naphthoquinones were prepared by a one-pot Stille-type reaction via vinylstannanes. Oxepines are formed by unexpected domino reactions via 1,4-dihydroxynaphthalene species. Epoxides are formed by a Michael/Darzens reaction via the o-quinone methides.     

Mechanism of the etherification of 2-alkylamino-1-phenylethanol derivatives

Derivatives of 2-alkylamino-1-(4-hydroxyphenyl)-1-ethanol have been converted to the β-methylethers in good yield. Etherification of 2-alkylamino-1-(4-methoxyphenyl)-1-ethanol could not be accomplished. Based on this unreactivity, a mechanism is proposed whereby the etherification proceeds via a quinoidal intermediate and not via a carbonium ion intermediate. It is concluded that the acid catalyzed racemization of catecholamines may occur via a quinoidal intermediate.     

Total synthesis of branimycin: an evolutionary approach

The first total synthesis of the macrolactone antibiotic branimycin (4) has been described. The key disconnection leads to a cis-dehydrodecalone core and a polyketide side chain which are connected via organometallic addition. The dehydrodecalone core was targeted via altogether five different approaches featuring various kinds of chiral elements and ring-closing methodology. In the end the most successful method starting from diepoxynaphthalene 109 was chosen to carry on with the synthesis. Thus the oxygen functions and carbon appendages were introduced via organometallic desymmetrization reactions to generate epoxy ketone 107, to which vinyl iodide 11 was added after conversion into the organolithium species. The synthesis was completed by introducing the ester side chain via Michael addition and subsequent macrolactonization.     

Polymer-protein conjugates from omega-aldehyde endfunctional poly(N-vinylpyrrolidone) synthesised via xanthate-mediated living radical polymerisation

Aldehyde omega-endfunctional poly(N-vinylpyrrolidone) was synthesised via quantitative conversion of a xanthate endfunctional precursor obtained via RAFT-mediated polymerisation.     

Synthesis and evaluation of atropos dihydro-5H-dibenzazepinium halide PTCs derived from α-methylbenzylamine

A short synthetic route to diastereoisomeric atropos dihydro-5H-dibenz[c,e]azepinium salts via reaction of a single enantiomer of (R)-α-methylbenzylamine with a racemic atropos biphenol derivative is described. Compounds prepared via this approach are used to provide strong evidence that structurally related tropos dihydro-5H-dibenz[c,e]azepinium salts preferentially react via a single conformation in PTC reactions involving glycine imine enolates.     

Complexes of a bio-molecule and a C60 cage

C₆₀ is the most important fullerene cage and glycine is the simplest representative of a backbone unit of a protein. In this paper, the structures and the energies of glycine–C₆₀ complexes were calculated at the B3LYP/6-31G(d) level DFT. It was found that the binding of glycine to C₆₀ generated a slightly unstable complex via its amino nitrogen, a moderately unstable complex via its hydroxyl oxygen, and a very unstable complex via its carbonyl oxygen. This indicates that fullerene cages might be unable to form stable bindings to proteins via their amino nitrogen, hydroxyl oxygen and carbonyl oxygen active sites.     

Rapid long-distance hole transfer through consecutive adenine sequence

Long-distance hole transfer via A-hopping over a long A sequence in DNA has been studied by time-resolved transient absorption measurements. DNA modified with naphthalimide (NI) and phenothiazine (PTZ), in which two molecules are separated by a consecutive A sequence, was synthesized to investigate the hole transfer process via A-hopping. After the laser-pulse excitation of NI, an NI radical anion and PTZ radical cation were produced within the laser pulse duration (8 ns) even in the case of an A30 sequence. Hole transfer efficiency from A adjacent to NI to PTZ was weakly distance dependent, showing that the hole transfer process through a consecutive A sequence proceeds via a multistep mechanism. These results clearly suggest that the hole transfer via A-hopping in DNA takes place efficiently and rapidly.     

Nanoporous Silicas from Cationic Polymer-Silica Hybrids

A range of polyviologens was prepared via the Menshutkin reaction and incorporated into a silica matrix via the base catalysed hydrolytic sol-gel reaction. The resultant amorphous hybrids were found to consist mostly of aggregates of roughly spherical particles. Surface area analysis of the hybrids revealed a correlation between the length of the alkyl chain and the counter-ion upon the pore size distribution. Minimal shrinkage of the pores was observed when the polymer was removed via calcination.     

Topography and field effects in the inner side of microvia hole using ToF‐SIMS

We have developed a simple and powerful method, which is called ‘angled sample holder method’, to characterize a topographic structured sample such as microsized via hole of ball grid array using time‐of‐flight SIMS. The diameter of via holes was 100 µm and the depth was 70 µm. To remove the shaded area by incidence primary ion beam and to extract secondary ions from the bottom of a via hole, several types of angled sample holders with compensation steering plate were applied on the basis of simulation results using SIMION code. And the analyses using angled sample holder method enabled us to characterize the bottom and side wall of a via hole in clear. Copyright © 2014 John Wiley & Sons, Ltd.     

Enantiospecific synthesis of pseudoacarviosin as a potential antidiabetic agent

A pseudo-1,4'- N-linked disaccharide, pseudoacarviosin 5, was constructed via a key palladium-catalyzed coupling reaction of pseudoglycosyl chloride 8 (prepared from d-glucose via a novel direct intramolecular aldol addition in 12 steps) and pseudo-4-amino-4,6-dideoxy-alpha- d-glucose 9 (prepared from l-arabinose via an unusual trans-fused isoxazolidine-selective intramolecular nitrone-alkene cycloaddition in 11 steps). Pseudoacarviosin 5 has been shown to be a potent inhibitor of alpha-glucosidases, particularly the intestinal mucosal enzymes sucrase and glucoamylase of relevance to blood glucose control.     

Palladium-catalyzed cyclization reaction of allylic bromides with 1,2-dienyl ketones. An efficient synthesis of 3-allylic polysubstituted furans

3-Allylic polysubstituted furans were synthesized via a palladium-catalyzed cyclization reaction of allylic bromides with differently substituted 1,2-allenyl ketones. This process may occur via the reaction of a furanyl palladium intermediate with allylic bromide.     

Facile construction of the benzofuran and chromene ring systems via PdII-catalyzed oxidative cyclization

[reaction: see text]. We herein report the development of one-pot procedures for the conversion of allyl aryl ethers to 2-methylbenzofurans (via sequential Claisen rearrangement and oxidative cyclization) and for the conversion of aryl homoallyl ethers to chromenes (via direct oxidative cyclization). It is likely that both reactions proceed via a common Pd-catalyzed pathway involving olefin activation, nucleophilic attack, and beta-hydride elimination.     

Detection of DNA base variation and cytosine methylation at a single nucleotide site using a highly sensitive fluorescent probe

A fluorescent DNA probe containing an anthracene group attached via an anucleosidic linker can identify all four DNA bases at a single site as well as the epigenetic modification C/5-MeC via a hybridisation sensing assay.