Nitrogen ion implantation in single wall carbon nanotubes

We report an X-ray photoemission and electron energy loss study on 3 keV ion implantation in single wall carbon nanotubes. Our results show that nitrogen atoms can bind to carbon in tetrahedral sp³, defects related pyridine-like, and triangular sp² configurations and such bondings are stable for annealing up to 650 K. Heating at higher temperatures results in preferential substitutional nitrogen doping. This technique opens a new channel for controlled doping in carbon nanotubes for device applications.     

Substrate preparation techniques for direct investigation by TEM of single wall carbon nanotubes grown by chemical vapor deposition

We have investigated and evaluated different TEM sample preparation techniques for studying carbon single-walled nanotube (C-SWNT) nucleation and growth, issued from CVD processes when the catalyst is supported on a substrate. This kind of study requires means to observe individual and isolated tubes. It implies using synthesis conditions able to produce only a low density of tubes and to thin the substrate to electron transparency, to observe the nanotubes and the catalytic particles from which they have grown in their native state. We have tested two approaches, depending if the substrate is thinned after or before the synthesis. The low tube density requirement led us to exclude all the techniques where the substrate is thinned to electron transparency after the synthesis. We have shown, that, with this last approach, all TEM preparation techniques dramatically suffer from a lack of control of thin areas with respect to the location of the tubes, which is unknown. However we have demonstrated that the suitable approach is to perform synthesis directly on transparent substrates presenting several holes. We have tested the capabilities and the potentialities of these supports for studying the size distribution and composition of the catalytic particles, the nucleation mode, the diameter and helicity of the tubes. These results are very promising and represent an important step for performing specific nanoscale TEM analyses necessary for the study of the growth mechanism of nanotubes on substrates.     

Effect of PVA functionalization on hydrophilicity of Y-junction single wall carbon nanotubes

Hydrophilic surface of carbon nanotubes (CNTs) are of great interest for various applications including chemical and biological sensing. Surface functionalization of single wall carbon nanotubes (SWNTs) mats with a biocompatible polymer polyvinyl alcohol (PVA) was studied. PVA modification induced a drastic change in water wettability of the SWNT surface transforming it from hydrophobic to highly hydrophilic. These PVA modified SWNTs mats have also demonstrated increasing impedance variation in relative humidity compared to the pristine nanotubes. An appreciable change in conductivity of Y-junction SWNT mats as a function of relative humidity indicates its potential application as humidity sensor. This higher sensitivity for humidity variation shown in Y-junction SWNT mats could be attributed to the greater portion of semiconducting nanotubes in these mats revealed by Raman analysis. A possible conductance changing mechanism of surface modified SWNTs mats is discussed.     

Metallic nanoparticles on plasma treated carbon nanotubes: Nanohybrids

Multi-wall carbon nanotubes (MWCNTs) were decorated with metal clusters by thermal evaporation. Transmission electron microscopy (TEM) shows that the nature and extent of metal coverage can be varied by plasma treating the MWCNT surface. The metal clusters on oxygen plasma treated arc-discharge MWCNTs have a more dense distribution than the clusters evaporated on as-synthesized arc-discharge MWCNTs. In contrast, the plasma treatment did not affect the cluster distribution on CVD MWCNTs. Analyses of the valence band and the core levels by X-ray photoelectron spectroscopy suggest poor charge transfer between gold clusters and MWCNTs; on the contrary suggest good charge transfer between Ni clusters and MWCNTs.     

On the encapsulation of azafullerenes inside the single-walled carbon nanotubes: Density-functional theory based treatments

We theoretically studied the encapsulation of azafullerene (C₅₉N) inside the single-walled carbon nanotubes (SWCNTs) from the first-principles. Adsorption energy is calculated, and the azafullerene affinities for the typical semiconducting and metallic nanotubes are investigated and compared with those of pure C₆₀ fullerene. It has been found that the azafullerene as well as the fullerene affinity for the semiconducting nanotubes is stronger than that for the metallic ones, and the energy values and binding distances are typical for the physisorption. Our first-principles results indicate that the interaction between SWCNTs and azafullerenes is comparable with the nanotubes-C₆₀ system. The charge analysis shows, however, that the charges have been transferred from the cage to the tube in the azafullerene peapods, while in the fullerene peapods the charges were found to be transferred from the tube to the fullerene nanocage. Furthermore, it was found that the interaction between the considered fullerenes and host nanotubes strongly depends on the tube diameters.     

Growth of single wall carbon nanotubes using PECVD technique: An efficient chemiresistor gas sensor

In this work, the uniform and vertically aligned single wall carbon nanotubes (SWCNTs) have been grown on Iron (Fe) deposited Silicon (Si) substrate by plasma enhanced chemical vapor deposition (PECVD) technique at very low temperature of 550 °C. The as-grown samples of SWCNTS were characterized by field emission scanning electron microscope (FESEM), high resolution transmission electron microscope (HRTEM) and Raman spectrometer. SWCNT based chemiresistor gas sensing device was fabricated by making the proper gold contacts on the as-grown SWCNTs. The electrical conductance and sensor response of grown SWCNTs have been investigated. The fabricated SWCNT sensor was exposed to ammonia (NH₃) gas at 200 ppm in a self assembled apparatus. The sensor response was measured at room temperature which was discussed in terms of adsorption of NH₃ gas molecules on the surface of SWCNTs. The achieved results are used to develope a miniaturized gas sensor device for monitoring and control of environment pollutants.     

Catalytic oxidation of carbon nanotubes with noble metal nanoparticles

Catalytic oxidation of multi-walled carbon nanotubes (MWNCTs) with some noble metal nanoparticles was observed by environmental transmission electron microscopy (E-TEM). Amoeba-like movement of the nanoparticles was observed even at a temperature of ∼400 °C, which is much lower than the melting points of any of the metals. In particular, rhodium particles reacted intensely with MWCNTs, and assumed a droplet-like shape. On the other hand, gold particles caused very little erosion of the MWCNTs under the conditions of this study.     

Magnetization of carbon nanotubes

For narrow-gap carbon nanotubes, the curvature effect due to the misorientation of 2p_z orbitals dominates over electronic structures and thus magnetic properties. It significantly changes magnetization and magnetic susceptibility, and creates special structures in them. There exists a critical field direction in changing magnetism. The critical angle strongly depends on the chiral angle, the nanotube radius, and the temperature. One-dimensional carbon nanotubes are quite different from zero-dimensional carbon tori, such as in terms of special structures in magnetization, the strength of the magnetic response, and the critical angle.     

Adsorption of nonpolar benzene derivatives on single-walled carbon nanotubes

The adsorption of benzene, toluene, and chlorobenzene on single-walled carbon nanotubes (SWCNTs) with and without acid oxidation was conducted to investigate the influences of derivative groups on benzene rings and functional groups from SWCNTs on adsorption by SWCNTs. The SWCNTs of high purity were chosen and moderate acid oxidation was performed so that the surface physical properties remained unchanged after acid oxidation and the influences of acid oxidation on adsorption were only contributed from the modification of the surface chemistry of SWCNTs. The oxygen-containing surface groups introduced by acid oxidation obstructed the interactions between functional groups of nonpolar benzene derivatives and C-rings of SWCNTs significantly. The dispersive interaction between the partially positive H⁺ of the methyl group and the oxygen-containing surface groups slightly increased the adsorption of toluene on oxidized SWCNTs at high solution pH. The thermodynamic of adsorption was also studied at different temperatures.     

Electronic properties of alkali-metal intercalated single walled carbon nanotubes

We present a comparative study of the electronic properties of sodium and lithium intercalated single walled carbon nanotubes in a bucky paper sample by electron energy loss spectroscopy and photoemission spectroscopy. We have found that at room temperature both sodium and lithium rapidly diffuse into the bulk of the sample while different magnitudes of charge transfer from Na and Li to the nanotube bundles have been observed. The maximum observed displacement of the Fermi level is almost the same for both alkali although Na and Li induce quite different changes in the carbon nanotube electronic structure. We interpret our results as a more covalent character of the Li-carbon nanotube interaction with respect to the ionic character of the Na-carbon nanotube interaction; the localization of the charge density along the Li-C bond is responsible for an intertube interaction within the carbon nanotube ropes.     

Terahertz applications of carbon nanotubes

We formulate and justify several proposals utilizing unique electronic properties of carbon nanotubes for a broad range of applications to THz optoelectronics, including THz generation by hot electrons in quasi-metallic nanotubes, frequency multiplication in chiral-nanotube-based superlattices controlled by a transverse electric field, and THz radiation detection and emission by armchair nanotubes in a strong magnetic field.     

An efficient route towards the covalent functionalization of single walled carbon nanotubes

A simple and efficient method of chemical functionalization of both single and multiwalled carbon nanotubes has been discussed to give enhanced water solubility by rapidly and efficiently generating an appreciable amount of hydrophilic functional groups using microwave radiation. Surface functionalization containing more than 30 wt% of oxygen has been achieved, resulting into solubility of 2–5 mg/mL. Further covalent functionalization of such soluble SWNTs provides a remarkable degree of aniline functionalization through amidation, where the formation of polyaniline has been avoided. Functionalization of SWNTs is confirmed by techniques like electron microscopy, Fourier transform infrared spectroscopy, thermogravimetry, Raman spectroscopy, cyclic voltammetry and impedance spectroscopy. Electrochemical analysis suggests an enhanced double layer capacitance (110 F/g) of nanotubes after microwave treatment. Aniline functionalization of SWNTs shows possible variations on the nanotube topography with concomitant formation of a dynamic polymer layer on the nanotube surface.     

Size and temperature dependence of the specific heat capacity of carbon nanotubes

The specific heat capacity (C_v) of carbon nanotubes for different temperatures and radii is calculated and presented. These calculations are based upon the continuum model of Zhang et al. The change in dimensionality behaviour (from quasi-1D to quasi-2D) as a function of temperature for tubes of different radii is investigated. It is found that for a range of radii the changeover occurs between 180 K and 400 K. Thicker nanotubes have intrinsically stronger quasi-2D behaviour beyond this temperature range than thinner nanotubes. The present numerical results confirm a qualitative discussion of this behaviour presented earlier by Benedict et al. For a given temperature, the variation of C_v as a function of radius is also discussed. An expression has been obtained to show the linear variation of C_v in the appropriate low temperature region.     

Thermal conductance for single wall carbon nanotubes

We report a theoretical analysis of the phonon thermal conductance, κ(T), for single wall carbon nanotubes (SWCN). In a range of low temperatues up to 100 K, κ(T) of perfect SWCN is found to increase with temperature, approximately, in a parabolic fashion. This is qualitatively consistent with recent experimental measurements where the tube-tube interactions are negligibly weak. When the carbon-carbon bond length is slightly varied, κ(T) is found to be qualitatively unaltered which implies that the anharmonic effect does not change the qualitative behavior of κ(T). Received 12 June 2001     

Influence of temperature change on column buckling of multiwalled carbon nanotubes

Based on theory of thermal elasticity mechanics, an elastic multiple column model is developed for column buckling of MWNTs with large aspect ratios under axial compression coupling with temperature change. In this model, each of the nested concentric tubes is regarded as an individual column and the deflection of all the columns is coupled together through the van der Waals interactions between adjacent tubes. The thermal effect is incorporated in the formulation. Following this model, an explicit expression is derived for the critical buckling strain for a double-walled carbon nanotube. The influence of temperature change on the buckling strain is investigated. It is concluded that the effect of temperature change on the buckling strain is dependent on the temperature changes, the aspect ratios, and the buckling modes of carbon nanotubes.     

Synthesis and characterization of carbon nanotubes on carbon microfibers by floating catalyst method

In this paper, carbon nanotubes were synthesized on carbon microfibers by floating catalyst method with the pretreatment of carbon microfibers at the temperature of 1023 K, using C₂H₂ as carbon source and N₂ as carrier gas. The morphology and microstructure of carbon nanotubes were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). The composition of carbon nanotubes was determined by energy dispersive X-ray spectroscopy (EDX). The results showed that the surface of treated carbon microfibers was thickly covered by carbon nanotubes with diameters of about 50 nm. EDX image indicated that the composition of carbon nanotubes was carbon. In comparison with the sample grown on untreated carbon microfibers surface, it was found that after carbon microfibers were boiled in the solution of sulfur acid and nitric acid (VH₂SO₄:VHNO₃ = 1:3) and immersed in the solution of iron nitrate and xylene, carbon nanotubes with uniform density can be grown on carbon microfibers surface. Based on the results, we concluded that the pretreatment of carbon microfibers had great effect on the growth of carbon nanotubes by floating catalyst method.     

Damping of electron Zitterbewegung in carbon nanotubes

Zitterbewegung (ZB, trembling motion) of electrons in semiconductor carbon nanotubes is described taking into account dephasing processes. The density matrix formalism is used for the theory. Differences between decay of ZB oscillations due to electron localization and that due to dephasing are discussed.     

Investigation of electrical transport in hydrogenated multiwalled carbon nanotubes

Highly disordered multiwalled carbon nanotubes of large outer diameter (∼60 nm) fabricated by means of chemical vapor deposition process inside porous alumina templates exhibit ferromagnetism when annealed in a H₂/Ar atmosphere. In the presence of an applied magnetic field, there is a transition from positive to negative magnetoresistance. The transition may be explained in terms of the Bright model for ordered and disordered carbon structures. Additionally, temperature dependent electrical transport experiments exhibit a zero-bias anomaly at low temperature.     

Biological functionalization and fluorescent imaging of carbon nanotubes

Biofunctionalization and manipulating of carbon nanotubes (CNTs) is important for biomedical research and application. Cy5 labeled goat anti-rabbit IgG (anti-IgG-Cy5) is chemically bonded to CNTs via a two-step process of diimide-activated amidation. This process can avoid the intermolecular connection of proteins. Fluorescent imaging of CNTs in aqueous solution has been demonstrated using anti-IgG-Cy5 immobilized CNTs (IgG-CNTs) as the model. The biologically functionalized carbon nanotubes (f-CNTs) in solution have been observed successfully using fluorescence microscopy. The fluorescent image of highly oriented f-CNTs is obtained at first time. The influencing factors on fluorescent imaging including oxidation duration, background noise and reactant concentration are discussed.     

Effects of phosphorus-doping upon the electronic structures of single wall carbon nanotubes

The phosphorus-doped single wall carbon nanotube (PSWCNT) is studied by using First-Principle methods based on Density Function Theory (DFT). The formation energy, total energy, band structure, geometry structure and density of states are calculated. It is found that the formation energy of the P-doped single carbon nanotubes increases with diameters; the total energy of carbon nanotubes with the same diameter decreases as the doping rate increases. The effects of impurity position on the impurity level are discussed. It illustrates that the position of the impurity level may depend on the C-P-C bond angle. According to the above results, it is feasible to substitute a carbon atom with a phosphorus atom in SWCNT. It is also found that P-doped carbon nanotubes are N type semiconductor. Supported by the Natural Science Foundation of Fujian Province of China (Grant No. A0220001)